Database Develop

S5830 wont boot after I fiddled with the software

Hi,
I have a S5830 which was running CWM - not sure exactly what version but worked perfectly, and had CFW CyanogenMod (I think 7.2.0 if I remember correctly)
I did something stupid, I had a few bugs which were annoying me so thought I'd go back to OFW, I downloaded a couple from Tsar3000 which I tried flashing through Odin but It would just go for ages and not seem to progress. I can get in download mode but I dont know toe process to take to now get me back on official fw with original recovery. I have downloaded the stock recovery image zip file from this website but when ever I try and flash anything Odin just seems to not progress. I can no longer boot into recovery mode.
What shall I do from here please?
Thanks

Seems weird, are you sure you did flash it correctly?
How to flash with odin.
Flashing the newest firmware:
1) Turn off your phone
2) Remove your SIM Card and SD Card
3) Extract previously downloaded firmware
4) Open ODIN 4.38 on your PC
5) Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
6) Connect your phone via USB into PC
7) When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
8) If ODIN detected and recognised your phone should light up the first square to the left side
9) Press "Start" button and wait, the process should take ~5 minutes
10) If all goes well your phone should reboot automatically
11) Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
12) Disconnect your phone
13) Turn off your phone
14) Insert your SIM Card and SD Card again
15) Turn on your phone
16) Now you have the newest firmware!
If you did try, pushing CWM with Odin.
Flash Custom Recovery:
1) Push recovery-clockwork-5.0.2.6-galaxyace.img to your device using Android Debugging Brige push recovery-clockwork-5.0.2.3-galaxyace.img /tmp/" command
2) Turn off your phone
3) Press POWER+HOME BUTTON
4) Login to your device over "adb shell"
5) Mount /system using "mount /dev/block/stl12 /system" command
6) Flash CWM recovery using "flash_image recoveryonly /tmp/recovery-clockwork-5.0.2.3-galaxyace.img" command
7) Umount /system using "umount /system" command
8) Reboot your device using "reboot recovery" command to test your new CWM recovery
9) Reboot your device[/QUOTE]
Then flash Stock Recovery, from CWM. - Download it Here. Use the version appropriate to your Android version.

reply
Hi,
Thanks for the reply. I tried everything you said except flashing the custom recovery with the method you said. The download link you provided for the recovery unfortunatly doesn't work So I downloaded from another link on the forum, but when I try and push the file ADB just doesnt find the device. Note: I can only get in download mode.
Do you know another way I can do this?
Thanks for your help

reply
Hi,
I tried what I did th efirst time, Odin + Ops + Custom Recovery - One package etc and its worked this time, only difference is did it on another PC, Still 7 x64. Dont kno whats different but phone now boots again so i can start from the beginning.
Thanks

[Q] Cannot get from UCKH3 TO UCKK4 kies/ota fail.

my kernel is 2.3.35.7-i897UCKH3-CL461307
The wiki states I must be at Android 2.3 build UCKK4 (AT&T) to get to cm10.
I tried the captivate OTA update- says I am at most recent firmware.
I tried kies- and it says unregistered device.
I just bought this phone (new-unlocked) from amazon to replace my failed captivate (running cm10). I really miss CM on the phone. lol.
Can someone point me in the correct direction? I am hoping there is a way to get to cm10 from where I am.
Any help is appreciated.
Thanks in advance
John Kilbert.

ota not a good plan.
read this thread for your path to kk4
http://forum.xda-developers.com/showthread.php?t=1350266

Thnanks. I have read that.
I am here:
Download Easy CWM and Bootloaders Gingerbread here
Dead link. [http://teamkomin.com/Captivate/i897-Speedmod-K13E-GBbootloaders-One-Click.jar]
Actually, they whole site is empty.
Any ideas?

Here ya go....Stock KK4 http://forum.xda-developers.com/showthread.php?p=18370912
Then flash through Odin the .tar file version of KK4 Corn Kernel version 7.0A to get CWM recovery....here...http://forum.xda-developers.com/showthread.php?p=18233847
Then flash through cwm ur Rom of choice.
Sent from my SAMSUNG-SGH-I747 using xda premium

Quick few questions please? (elaboration)
from the read-me / many posts:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash them again. They are
backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, MIUI without issues,
per the proper install instructions.
-Are the bootloarders mentiond, the ones from flashing, or from samsung/att itself. eg. I have stock gingerbread 2.3.4 from the factory, should I use the bootloaders or not?
-Would it hurt to reinstall the bootloaders if there was any question?
- I performed a dry run, and cannot get the "digging down android" I get this:
Android system recovery <3e>
Samsung recovery utils -for bml-
image:
http://imgur.com/bJcQDXU
What I expected:
http://apcmag.com/images/galaxy-froyo-3.jpg
Did I do something wrong? (edit: built a jig- goes into digger mode now)
-since I am on 2.3.4 I am tryin gto install the kk4 you linked-
the instructions say get to download mode (done)
run oding as admin (done)
yellow com lights up(done)
press start? --how does this get to the correct file? do I load it under PIT, PDA, PHONE, CSC?
thanks much.
JOhn kilbert.
Edit:
Here is the "plan"
Prerequisites:
Download Odin3 v1.7.zip & install
Download CornKernel_UCKK4_v70a
Download Rom
Instructions:
1. Get rom onto your internal SD card (copy to phone using PC.)
2. Download and Run Odin Flashing Utility (not Odin one click) Odin3 v1.7.zip (install on win pc)
3. Boot phone into DOWNLOAD mode (by
plug USB cable into computer
have phone shut off
hold both volume buttons
plug USB into phone
let go of buttons when you see an android digging "down"
4. Flash to Stock I897UCKK4 Gingerbread Firmware
*tbd
4. Click RESET button in Odin (beside START)
5. Click PDA button in Odin and find your kernel.tar file
(kk4 corn kernel 7.0A)
6. Click "Start" in Odin
7. Reboot into RECOVERY mode (instructions below) ** Use volume buttons to navigate up/dn and pwr for enter.
have phone shut off
Hold both volume buttons
press and hold power button
KEEP ALL 3 BUTTONS HELD for 3-5 seconds
after kernel bootscreen you will see clockwork recovery menu
8. Select "flash zip from sd card"
9. Navigate to the rom you placed on internal sd in step 1 : select Yes
10. Phone reboots to new ROM.

Here i what I did-
unpacked .zip from http://forum.xda-developers.com/showthread.php?p=18370912
http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html
ran as admin the odin file.
pressed the big start button
here is the output.
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> boot.bin
<ID:0/005> factoryfs.rfs
<ID:0/005>
<OSM> All threads completed. (succeed 0 / failed 1)
phone is stuck
any advice?

Have u looked at this Captivate - PC Connection Issues... thread. http://forum.xda-developers.com/showthread.php?p=33227541
Be careful flashin packages with bootloaders. If flash fails during the install of the boot.bin or sbl.bin u could possibly brick ur phone.
If u were on anything gingerbread before this, then u have the gb bootloaders. So u can use a package without the Bls included.
Try a different micro usb/usb cable or diffferent usb port. More info in that thread i linked.
Majority of the time, the trying of a different cord is the solution.
Sent from my SAMSUNG-SGH-I747 using xda premium

Yea, I bricked it. Back running though. Was a hairy couple of hours. lol.
Thanks for your help.
John Kilbert
Here is how I did it (100% working)-
From android 2.3.4.
Directions that worked: I used linux host running a xp virtual machine guest. This may have presented sopme issues, but it worked.
I used the odin method. Each time I connnected the phone I needed to goto devices and click the phone. I need to do this
because I needed 2.3.5 to get a rom installed, and OTA/Kies failed everytime.
Preliminary: Download Rom (and gapps) and get on internal 13gb SD card. power off phone.
Flash to Stock I897UCKK4 Gingerbread Firmware
A. Download:
reference (http://forum.xda-developers.com/showthread.php?p=18370912)
odin or heimdall one click (post #3) I used the odin.
http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html
Download file
B. extract
a. run as administrator odin file contained in the archive itself.
b. get to download mode (i used the jig method- button method may be used also)
C. click start.
a. (took me 5 tries to get a successfull install ..whew.. each failure I removed battery
and held the up/down vol buttons and tried again whhile the usb was connected. I believe it may have been a
corrupt download, as when I redownloaded it it worked on the 5th try)
Install CornKernel & Rom
Prerequisites:
Download Odin3 v1.7.zip & install
Download CornKernel_UCKK4_v70a
Download Rom (and Gapps) and get on internal 13gb SD card (if you didn't do it earlier)
Instructions:
1. Get ROM onto your internal SD card (copy to phone using PC.)
a. (my choice- or use yours: wiki.cyanogenmod.org/w/Captivatemtd_Infohttp://wiki.cyanogenmod.org/w/Captivatemtd_Info)
(http://download.cyanogenmod.org/get/jenkins/12598/cm-10.0.0-captivatemtd.zip)
b. Gapps (see 11)
2. Download odin Flashing Utility (not Odin one click) Odin3 v1.7.zip (install on win pc) & cornkernel.
a. (ref http://forum.xda-developers.com/showthread.php?p=18233847 for cornkernel)
http://dl.dropbox.com/u/10453685/android/CornKernel_UCKK4_v70A.tar
b. (ref forum.xda-developers.com/showthread.php?t=1350266 for odin )
http://forum.xda-developers.com/attachment.php?attachmentid=582251&d=1304114050
3. deleted.
4. Run Odin (as administrator)
5. Boot phone into DOWNLOAD mode (by jig or)
a. plug USB cable into computer
b. have phone shut off
c. hold both volume buttons
d. plug USB into phone
e. let go of buttons when you see an android digging "down"
(if you get a different screen- try making the jig-its easier especially if you have large clumsy hands like me) or-
(http://forum.xda-developers.com/showthread.php?p=33227541)
6. ODIN should see yellow slot fill as you connected phone.
a. Click RESET button in Odin (beside START)
b. Click PDA button in Odin and find your kernel.tar file
(kk4 corn kernel 7.0A)
c. Click "Start" in Odin
d. wait fro pass.
e. phone will reboot with a corn kernel.
7. Reboot phone into RECOVERY mode (instructions below) ** Use volume buttons to navigate up/dn and pwr for enter.
(ref: http://forum.xda-developers.com/showthread.php?p=33227541 for problems)
a. have phone shut off
b. Hold both volume buttons
c. press and hold power button
d. KEEP ALL 3 BUTTONS HELD for 3-5 seconds.
e. after kernel bootscreen you will see systemcorps cwm recovery menu. if not try again
f. Select "install zip from sd card" option from menu.
g. - choose zip (option in menu)
h. Navigate to the rom you placed on internal sd in step 1 : select Yes
8. Let reboot and install
a. phone will reboot on its own a few times
b. when finished it willleave you at cwm recovery menu.
c. choose reboot system now.
9. Shutdown, reinstall SD & SIM
10. Use as normal. done
11. Realize you need gapps!
a. should have put in in the folder back on step 1. If you did this you could have installed it at step 8 just after (b.)
12. download correct gapps and place in root (same place as rom.zip)
(http://wiki.cyanogenmod.org/w/Gapps)
13. Reboot phone into RECOVERY mode ** Use volume buttons to navigate up/dn and pwr for enter.
(ref: http://forum.xda-developers.com/showthread.php?p=33227541 for problems)
a. have phone shut off
b. Hold both volume buttons
c. press and hold power button
d. KEEP ALL 3 BUTTONS HELD for 3-5 seconds.
e. after att/ cyanogen kernel bootscreen you will see cockwork mod (not syscorp) cwm recovery menu. if not try again
f. Select "install zip from sd card" option from menu.
g. - choose zip (option in menu)
h. Navigate to the gapps.zip you placed on internal sd.
i. choose yes
j. wait for complete (watch bottom of screen)
k. choose go back
l. reboot system now
m. will take longer and say upgrading.
14. done (update google info under settings-accounts)

Good deal. Glad u got it goin !
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] [Need Help] Can't boot???

Hi all
Now,I'm using Note 3 AT&T (N900A). When I am using Odin to go to Recovery, then press Fail Odin, then I can not turn it on. Now, I can not use any buttons on the machine. When I press the Power button, the machine does not vibrate. The screen is dark. Anyone can help me? Thanks so much!!
P/s: sorry about my English.
Follow instructions word for word, take your time and go slow
1.Download the (alreadykitkat.zip) if you haven't done so yet.
2. Extract it to somewhere on your desktop or PC
3.Copy “Safestrap-Custom.apk” to your phones internal memory, and install it. Make sure you install recovery from within safestrap app, or verify that it is installed
4.Next copy the rom to your phones internal memory(it’s called XNote Port.zip)
5.Boot into download mode (power off, then hold-Volume down, Home and power button at same time
6.Open the “Togetsafestrap” folder and open Odin (win 7 and 8 users may need to run with administrator rights). Add the correct partition Files,
Make sure the files or AP_N900AUCUBMJ5.tar.md5 and BL_N900AUCUBMJ5.tar.md5 and verify your Odin window looks like this picture
7.Click start. Now when the phone is booting up make sure to click “recovery” on the safestrap screen.
(If you missed it just hold down, power button until phone reboots)
8. You can wipe before flashing (Optional) if you want a clean install. Flash the X-Note Port.zip to Stock slot,
But don’t reboot when done,
9. Keep hitting the back button until you see the reboot menu button
Press reboot menu button and select download mode button. Or if you messed up and rebooted just Press Volume down, Home and power button at same time until your back in download mode.
10. Now open the folder “togetbooting” and open Odin. Select the correct partition Files, Make sure you select AP_N900AUCECMGL.tar and BL_N900AUCECMGL.tar and verify your Odin window looks like this picture
11. Click start
done, enjoy the ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2654992

Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353

440bro said:
Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353
Click to expand...
Click to collapse
it wont work if he isn't on mi9. it wont let him downgrade.

[Q] USB and SD Card storage unavailable, upper bar not showing up. etc.

I have a big problem with my Samsung Galaxy Mini 2 GT-S6500D. My SD Card and USB storage is not loading up. If I try to open my files or gallery or listen to music it tells me there is not card inserted. When I go see the amount of storage used, It says 0,00B/0,00B for both USB and SD Card. Also, the upper part of the screen where it's suppose to give me notifications and battery stats and time is missing. As well as my Wi-Fi won't turn on, when I try to it gives me an error. I can't plug it onto my computer.I tried a few ways of fixing but to no avail. Anyone know how to fix this, people if it's possible not to lose my memory?

do you use cm 10.1 or stock
if stock try to flash it with odin3 and pit file

Please explain me what are you talking about. I am a noob to these stuff about and around phones

I think im using the stock one but the I can't connect my phone to the usb on the computer and use it normal. Nor I can't use internet

you should flash your phone this is the instructions
download odin3 https://www.copy.com/s/qmTqyZFweDIj/Odin3_v3.09.zip
samsung driver for s6500 downloadcenter.samsung.com/content/SW/201401/20140121132354500/SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe
frimware for s6500 fileparadox.com/0bi6jri969ai/S6500DBGMK1_S6500DXECML1_XEC_.zip
install samsung drivers and
Download firmware from the above list
and extract the zip file, you should get
.tar.md5 file along with few other files.
2. Download Odin v3.09 and extract the zip
file, you should get Odin v3.09.exe file
along with other files.
3. Now Open/Run Odin v3.09.exe file as an
administrator (to open program with
admin privilege, right click on the Odin
v3.09.exe file and click on the “Run as
administrator” from the context menu, this
is applicable only on Windows Vista,
Windows 7 or higher PC)
4. Switch off and boot Galaxy Mini 2 S6500
into Download Mode by pressing and
holding the Volume Down+Home+Power
buttons together (long press until the
boot screen appear). A warning message
will flash, now press Volume Up key to
proceed to Download Mode .
5. Now connect your Galaxy Mini 2 S6500 to
your PC via USB cable
6. In Odin screen, you should see a COM
Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message
box. This means your device has been
successfully detected by Odin. (If not, then
try connecting through another USB port.
If you are using desktop PC, use USB port
located at the back of the CPU. If still
don’t work, then you should reinstall the
USB driver and try again)
7. Make sure that, only the “Auto Reboot”
and “F. Reset Time” options are checked
in Odin screen.
8. Now, click on the AP button and select
the .tar.md5 file that you get by
extracting the firmware zip file in step 1.
9. Now, click on the Start button to begin
the installation process, and wait few
moments.
10. Once completed, you would see “PASS!”
message in ID:COM port having green
background
11. Your phone should automatically reboot
after completion
12. You can now disconnect/unplug your
phone from computer

Done it all, just one thing, when I completed it, it showed me RESET with blue background.................... After which, later when my phone loaded it turned into PASS.
Thank you for helping me fix the problem with my phone

if i help you press thanks

How to root G800H

guyz i have galaxy s5 mini g800h with firmware
G800HXXU1ANGF..
I would like to tell me how can i root it?
i dont care if know will tripp or lose my warranty
ty in advance

How to root:
1- Turn on debug USB;
2- download root files - https://download.chainfire.eu/524/CF...xx-smg800h.zip
3- reboot phone in download mode (power+home+vol down)
4- Open Odin, press AP or PDA and select .tar file above
5- Conect USB when it detect in Odin, press Start and wait.
6- Done

kaiodduarte said:
How to root:
1- Turn on debug USB;
2- download root files - https://download.chainfire.eu/524/CF...xx-smg800h.zip
3- reboot phone in download mode (power+home+vol down)
4- Open Odin, press AP or PDA and select .tar file above
5- Conect USB when it detect in Odin, press Start and wait.
6- Done
Click to expand...
Click to collapse
ty man