Database Develop

[ROM] 5.0.2 Stock-ROM - LG D415 L90

I am not responsible for bricked devices. Follow these steps at your own RISK! :angel:
Flashing this ROM will install the STOCK Android 5.0.2 OS From LG & T-Mobile.
This is only intended for use on the LG L90 D415 (T-Mobile Variant)
I've tested and everything works just fine. Just be sure to flash the SuperSU zip I've also provided. otherwise you WILL lose root!
I ASSUME YOU ALREADY HAVE BEEN FLASHING ROMS ON YOUR DEVICE AND ALREADY HAVE A CUSTOM RECOVERY INSTALLED!
I'm currently running a TWRP flashable version of the Official Lollipop update for the D415 L90 Optimus, or as I call it, the LollipOptimus! LOL
Rooted and all!
In post #3 there are links to my downloads. :laugh:
thanks to: @DevoutDevelopment for advice!
& @shoxxy for twrp!
Thanks to LG for updating this mid-range device!
Thank you to the L90 community! :highfive: You guys ROCK!
XDA:DevDB Information
D415 Lollipop STOKK-ROM [Recovery Flashable], ROM for the LG Optimus L90
Contributors
brossovitch
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LGE L90 D415 (w7)
Based On: Stock LG/TMO OTA
Version Information
Status: Stable
Current Stable Version: D415-LolliSTOKK
Stable Release Date: 2015-04-15
Created 2015-04-09
Last Updated 2015-04-15

Reserved
For this Rom to flash and function properly you need:
An LG Optimus D415 (T-Mobile USA) which has a custom recovery installed.
As far as the boot loader being unlocked.... I never had the LG bootloader to begin with, only fastboot.
The current functioning ROM is FULL stock. You must flash SuperSU before rebooting or you will lose ROOT!
**************INSTRUCTIONS*****************
First download all three files in the next post. they are:
1. ROM Zip (LG/TMO packed by me.)
2. SuperSU update Zip (Mediafire)
3. TWRP.img (shoxxy)
++Ensure you have TWRP installed.++
Then do this:
1. Reboot into TWRP (CWM works too, I reccomend Shoxxys TWRP)
2. Flash ROM
4. Flash SuperSU zip to keep ROOT
5. Factory reset via TWRP
6. Reboot
You're DONE!
It will take several minutes to begin booting, be patient. You MAY see the LG logo for a minimum of 5 minutes, don't freak out!
************************************************** ************************************************** **************************************************
FRIENDLY HEADS UP:
The Stock ROM file is more than 1GB (1.07gb actually) so you'll need to have enough free space on your SDcard.
YES, I reccomend flashing it from the External SD Card.
******************************************************
Stock LG Lollipop unrooted?
Just follow this simple tutorial:
http://highonandroid.com/android-smartphones/how-to-root-lg-g-flex-2-g2-g3-on-lollipop/
*****************************************
If you need a way to install TWRP from the device and you are rooted I HIGHLY recommend RASHR:
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=en
Godspeed to you all. PM me if you have issues. But I'm not responsible for your decisions!

DOWNLOADS
*******************************************
LG L90 D415 Lollipop Stock LG ROM​******************************************
***************************************************************************************************************
TWRP by @shoxxy :
https://mega.co.nz/#!w9kjwaxY!xzJUOWd_BErk-F3_mAHAz3JUaVfypy1hFjffBoJOrxQ
(Mirror link on my MEGA account with permission from Shoxxy, you may not do the same..)
Updated: 04/27/2015
______________________________
Shoxxy's TWRP Thread (GO GIVE SOME THANKS):
http://forum.xda-developers.com/lg-l90/development/recovery-twrp2-7-1-0lgl90w7xxshoxx-t2826150
***************************************************************************************************************
SuperSU v2.46:
https://mega.co.nz/#!gotQHIpJ!aFb-3XvJQjav6ASo79G24dEgpVvOpWutnGbmMZWUVS8
***************************************************************************************************************
STOCK ROM:
https://mega.co.nz/#!QhNBjaYS!6H4_HX7wMW5zy7rs2FgNRpvj2eBfZW6OSxLZ3kP9nno
Updated: 04/16/2015 @ 05:23am
There is an issue with baseband coming from KK based ROMs.
There are work arounds.
**************************************************************************************************************
All file access to my L90 folder on MEGA:
https://mega.co.nz/#F!FgVjna7T!DA9yydBcB0PIk9UxeVZXzw
**********************************************************************************************************************
+LG FLASH TOOL THREAD:
> http://forum.xda-developers.com/showthread.php?t=2797190
(o^;^o)

LollipOptimus™
I have put together a modified version of this ROM. It's the stock OS with many changes..
Debloated and trimmed to where it is as MY daily driver..
It's stable, smooth, and functional. There are many things removed, like the quick memo app and quick remote app, I will not put them back in. You could just trial and error debloat the system on your own, like I did this week..
Anyway, here's the ROM:
https://mega.co.nz/#!B4EEXZxZ!40XcuPjeFMUVcW0TpAOeQwVkuZNNCzs9OtH9V-TJVl4
There will be updates made periodically. It's not fully done yet, IMO.
Make a nandroid before flashing this! Just in case!
Let me know immediately if there are any issues!

I'm so ready for this. I can finally have my camera back.

This is gonna be too good. Thanks for all the legwork so lazy bums like myself can enjoy the goodness.

nemesis101x said:
I'm so ready for this. I can finally have my camera back.
Click to expand...
Click to collapse
The Camera works! everything except the baseband for some reason...
I'm going to figure this out.
then provide a link to the ROM and SUPERSU zip to ensure you stay rooted.
I had some problems and the zip I made accidentally flashed the stock boot loader, OH NO!
adb reboot fastboot
then
fastboot flash recovery twrp.img
YAY I learned things today!

brossovitch said:
The Camera works! everything except the baseband for some reason...
I'm going to figure this out.
then provide a link to the ROM and SUPERSU zip to ensure you stay rooted.
I had some problems and the zip I made accidentally flashed the stock boot loader, OH NO!
adb reboot fastboot
then
fastboot flash recovery twrp.img
YAY I learned things today!
Click to expand...
Click to collapse
Baseband
I had this problem with stock kitkat.... I think it was my META file or my ubuntu giving me problems at that time

Razer206 said:
Baseband
I had this problem with stock kitkat.... I think it was my META file or my ubuntu giving me problems at that time
Click to expand...
Click to collapse
How did you fix this problem?

brossovitch said:
How did you fix this problem?
Click to expand...
Click to collapse
I never did somebody had already release deodexe KitKat back last Dec.... So I delete my Lil project
Check your boot img, could be giving problems
What tool did you use to pull systems files from kdz? I will upload mines if you wanna see them

Razer206 said:
I never did somebody had already release deodexe KitKat back last Dec.... So I delete my Lil project
Check your boot img, could be giving problems
What tool did you use to pull systems files from kdz? I will upload mines if you wanna see them
Click to expand...
Click to collapse
I used the LG firmware extraction tool.
I've fixed the issued! Uploading SOON!

Currently debloating. I will release debloated with SUPERSU and busybox preinstalled. I'm not going to deodex, I'll leave that to the individual.
This ROM is amazing. LG is really out doing themselves!
As it stands, my ROM is 1.07GB as a zip. I'm timming it down. Hoping to get somewhere nearer to 700mb..
Keep your eye's peeled. It's coming!

brossovitch said:
Currently debloating. I will release debloated with SUPERSU and busybox preinstalled. I'm not going to deodex, I'll leave that to the individual.
This ROM is amazing. LG is really out doing themselves!
As it stands, my ROM is 1.07GB as a zip. I'm timming it down. Hoping to get somewhere nearer to 700mb..
Keep your eye's peeled. It's coming!
Click to expand...
Click to collapse
You see deodex lollipop is crazy long, and lollipop throwing issues...
. I don't blame you, do the best you can

I'm currently running a TWRP flashable version of the Official Lollipop update for the D415 L90 Optimus, or as I call it, the LollipOptimus! LOL
Rooted and all!
Click to expand...
Click to collapse
Could you do TWRP or CWM flashable version of the Official Lollipop update for the D410 L90 Optimus?

brossovitch said:
Currently debloating. I will release debloated with SUPERSU and busybox preinstalled. I'm not going to deodex, I'll leave that to the individual.
This ROM is amazing. LG is really out doing themselves!
As it stands, my ROM is 1.07GB as a zip. I'm timming it down. Hoping to get somewhere nearer to 700mb..
Keep your eye's peeled. It's coming!
Click to expand...
Click to collapse
I know, that if i will flash twrp on stock lollipop D410 it will be bricked. Are U changing loader to avoid this? Or u create flashable 5.0.2 that working on older loaders?

Andruxa666777 said:
I know, that if i will flash twrp on stock lollipop D410 it will be bricked. Are U changing loader to avoid this? Or u create flashable 5.0.2 that working on older loaders?
Click to expand...
Click to collapse
Nope, none of that.
I will say this, @Quarx has a Lollipop CWM recovery if you're worried about recovery compatibility....
I honestly prefer to use the FLAWLESS TWRP from @shoxxy .........I mean, it's simply the best!
I flashed via TWRP with no problems whatsoever/
I flash the ZIP, then SuperSU.zip, then just to be extra safe I reflashed the TWRP.IMG from recovery.
then I rebooted recovery to ensure TWRP was installed.
then simply rebooted the system...
everything worked great so far.
I just want to test it a few more times and make sure I don't kill anyone elses device. I had a WiFi only phone for a good 7hrs. nobody should have to deal with that.
I bricked this device several times today already, i need to ensure everything is working well before I have someone test.
I currently have a few people in mind to test. if they agree and try it out with no problems, it will be free for the taking!

Should I leave it stock with GApps? or remove all the GApps so users can flash their own..?

I say remove all gapps so we can flash our own.
Might give a little bit of freedom for the users. But I don't really care! I wanna try this out!

brossovitch said:
Nope, none of that.
I will say this, @Quarx has a Lollipop CWM recovery if you're worried about recovery compatibility....
I honestly prefer to use the FLAWLESS TWRP from @shoxxy .........I mean, it's simply the best!
I flashed via TWRP with no problems whatsoever/
I flash the ZIP, then SuperSU.zip, then just to be extra safe I reflashed the TWRP.IMG from recovery.
then I rebooted recovery to ensure TWRP was installed.
then simply rebooted the system...
everything worked great so far.
I just want to test it a few more times and make sure I don't kill anyone elses device. I had a WiFi only phone for a good 7hrs. nobody should have to deal with that.
I bricked this device several times today already, i need to ensure everything is working well before I have someone test.
I currently have a few people in mind to test. if they agree and try it out with no problems, it will be free for the taking!
Click to expand...
Click to collapse
no, i mean that you are creating flashable 5.0.2, that will be flashing from recovery on 4.4.2 phone аnd after flashing recovery still properly working? It is?
But the official firmware via LG Support tool reflashes boot, aboot,laf,recovery,system folder etc. Does this mean that your firmware flashes only kernel, folders systems and data, but first levels of loading(like aboot) stay from older 4.4.2?

Andruxa666777 said:
no, i mean that you are creating flashable 5.0.2, that will be flashing from recovery on 4.4.2 phone аnd after flashing recovery still properly working? It is?
But the official firmware via LG Support tool reflashes boot, aboot,laf,recovery,system folder etc. Does this mean that your firmware flashes only kernel, folders systems and data, but first levels of loading(like aboot) stay from older 4.4.2?
Click to expand...
Click to collapse
No, this ROM will flash all those, then just flash SUPERSU and TWRP right behind it. it typically works. Try it out.
I uploaded a BETA, be careful!

[HOWTO] Bootloader Unlock and Upgrade to Marshmallow [N910VVRU2CQL1]

​
Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about the tools/files!
* YOU are choosing to make these modifications, and if you point the
* finger at me for messing up your device, I will laugh at you.
*
*/
You NEED a MicroSD, and it WILL be formatted during this process.​
THIS WILL NOT WORK ON GALAXY S3/GALAXY S4/GALAXY S6|e/Galaxy S7|e. It will NOT work on AT&T.
We can't help you root or teach you how to use ADB. It's important you have the ability to do these things or research them a bit before blindly using this.​
Click to expand...
Click to collapse
This is a summarized guide with the required files to upgrade and unlock the new bootlloader required for Android 6.0.1 Marshmallow (N910VVRU2CPD1) on Verizon Samsung Galaxy Note 4 (SM-N910V). Extended details about each step (e.g., rooting) can be found in the General Section of this forum.
If you're already on unlocked Android 6.0.1 Marshmallow bootloader, you can extract and flash the DevEd partial firmware via Odin to upgrade:
N910VVRU2CQL1_PartialFirmware_DevEd.tar.md5.7z​
This will upgrade the base firmware (NON-HLOS, modem, rpm, sbl1, sdi, and tz) to N910VVRU2CQL1.
Click to expand...
Click to collapse
Requirements:
Verizon Samung Galaxy Note 4 (SM-N910V)
All files in the Download Section
Odin installed on Windows
ADB installed on Windows, Mac, or Linux
Click to expand...
Click to collapse
Notes:
If you own a Developer Edition, you can still use this method unless you want to keep your original CID and signature. If so, make backup of your aboot and CID! You may contact @ryanbg to create a special unlock binary for your own device.
Everyone should unlock his bootloader on Lollipop to save extra steps and prevent complications. The official thread (or any guides based on it) will change your device CID to 150100523231384d4100657e54fc1200 which will match and allow for direct unlocking of the Marshmallow bootloader. Otherwise, the unlock binary will change your decvice CID and reboot, which may end up with a bootloop that requires extra step(s) to fix.
It's recommended to wipe data (factory reset) in stock recovery after Odin flash of full firmware.
Make appropriate backups of everything before trying this.
Click to expand...
Click to collapse
Instructions:
Unlock your Lollipop bootloader to match CID (start here)
You can ignore this step if you did it already. If not and for Developer Edition owners, I'd recommend to flash N910VVRU2BPA1 Full Firmware via Odin before unlocking.
Boot into Download Mode
Extract and flash N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 via Odin
This will make you on Lollipop with Marshmallow bootchain/firmware/modem, which is rootable.
Root your device (Check General Section for detailed instructions)
Note that WiFi will not work due to the updated bootloader, but you can use Mobile data if needed for rooting.
Unlock the bootloader using the same method:
Code:
[email protected]:/ # cd /data/local/tmp/
[email protected]:/ # chmod 777 samsung_unlock_n4-fix <
[email protected]:/ # ./samsung_unlock_n4-fix
============================== samdunk unlock 0.0.1 ==============================
NOTE 3 BETA UNLOCK!!!!!!!!!!!!!
this application comes with NO WARRANTY (express or implied)
this binary may not be rehosted, repackaged, one-clicked, etc.
there is no support provided for this application
this application has been tested on the Verizon Galaxy S5 only
it may work on the AT&T Galaxy S5, and possibly other similar Galaxy devices
there are no compatibility checks, do your research first
if run on an incompatible phone, it will likely permanently ruin the device
we STRONGLY advise against running any binary not obtained from the official source
official source is available at http://github.com/beaups/SamsungCID
SD card is required, all data on the SD card will be destroyed
changing to this developer CID may have other implications
the psn derived from the CID may be used for critical services
changing this psn may cause unexpected behavior or loss of services
continue at your own risk, you've been warned
aboot dev signature research credit to ryanbg
http://forum.xda-developers.com/member.php?u=766721
eMMC vulnerability, exploit, and the code you are running by beaups (sean beaupre)
http://forum.xda-developers.com/member.php?u=711482
Do you understand the implications of these warnings?
(Yes/No)
[+] CID at boot time is/was: 150100523231384d4100657e54fc1200
[+] dev CID matching, proceding to unlock
[+] backing up loaders, this will take a few minutes
[+] loaders successfully backed up
[+] success! powering off device, hopefully its not bricked!
Boot into Download Mode
Extract and flash twrp-3.0.2-0-trltevzw.tar.md5 via Odin
Boot into TWRP recovery
Flash MM Safe Upgrade, JasmineROM, or any MM TW (or MM+ AOSP-based) ROM
Extract and flash N910VVRU2CQL1_PartialFirmware_DevEd.tar.md5.7z via Odin
This will upgrade the base firmware (NON-HLOS, modem, rpm, sbl1, sdi, and tz) to N910VVRU2CQL1.
Reboot to system
ENJOY!
Click to expand...
Click to collapse
.
XDA:DevDB Information
Bootloaader Unlock, Tool/Utility for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr, ryanbg, beaups
Source Code: https://github.com/beaups/SamsungCID
Version Information
Status: Stable
Created 2016-06-14
Last Updated 2018-01-21

Reserved

Reserved

Thank you Hsbadr.
Sent from my SM-N910V using Tapatalk

@hsbadr @ryanbg @beaups thanks for all the hard work in unlocking new bootloader

Can we run this already?
Edit: Doesn't seem like all the files are available yet.
Sent from my Unlocked/Rooted SM-N910V using XDA-Developers mobile app

Where does one find the N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 file?

Bicknasty said:
Where does one find the N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 file?
Click to expand...
Click to collapse
Looks like its still in testing. I dont see the file either.

tolymatev said:
Looks like its still in testing. I dont see the file yet either.
Click to expand...
Click to collapse
blah, that's what I get for resetting before downloading the necessary files

Extra Virgin said:
thanks for all the hard work in unlocking new bootloader
Click to expand...
Click to collapse
You're welcome.
tolymatev said:
Can we run this already?
Click to expand...
Click to collapse
Sure. Why is it posted then?!
Bicknasty said:
Where does one find the N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 file?
Click to expand...
Click to collapse
tolymatev said:
Looks like its still in testing. I dont see the file either.
Click to expand...
Click to collapse
Bicknasty said:
blah, that's what I get for resetting before downloading the necessary files
Click to expand...
Click to collapse
Click to expand...
Click to collapse
No, it's already tested a few days ago. I just recreated the tar to include MM modem and NON-HLOS so that you don't have to flash extra tars. I'll upload it very soon, but in the meanwhile, you can familiarize yourself with the process and do any preliminary steps (backups, LP unlock, ... etc)

Thank you @hsbadr ....I.m glad your here with us

If I took the OTA, would I have to rollback to 5.1.1 and do this?

datstudandre said:
If I took the OTA, would I have to rollback to 5.1.1 and do this?
Click to expand...
Click to collapse
Yes, unless another method exists.

hsbadr said:
You're welcome.
Sure. Why is it posted then?!
No, it's already tested a few days ago. I just recreated the tar to include MM modem and NON-HLOS so that you don't have to flash extra tars. I'll upload it very soon, but in the meanwhile, you can familiarize yourself with the process and do any preliminary steps (backups, LP unlock, ... etc)
Click to expand...
Click to collapse
You are the greatest man, thanks!

For anybody who looked before but didn't notice, the missing firmware file has been uploaded and linked in the OP

I'm a little confused where does adb come into play at when do we flash the note 4 fix sorry the instructions seem a little vague....sorry....

ct_tec313 said:
I'm a little confused where does adb come into play at when do we flash the note 4 fix sorry the instructions seem a little vague....sorry....
Click to expand...
Click to collapse
If it's like the original root process you have to push a file via ADB.

ct_tec313 said:
I'm a little confused where does adb come into play at when do we flash the note 4 fix sorry the instructions seem a little vague....sorry....
Click to expand...
Click to collapse
Follow the link in the 1st step! It's probably b/c you own a developer edition and never tried to unlock/upgrade the bootloader before. Simply, you need ADB to push the unlock binary to /data/local/tmp and execute it after rooting. Theoretically, this can be done in Terminal Emulator on device, but we prefer to use ADB since users should increase their knowledge before trying something dangerous like this one.

Thank you I do own a developer edition...lol I know how to use adb I'm just a little rusty
..
Sent from my SM-N910V using Tapatalk

hsbadr said:
​
Disclaimer:
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
You NEED a MicroSD, and it WILL be formatted during this process.​
This is a summarized guide with the required files to upgrade and unlock the new bootlloader required for Android 6.0.1 Marshmallow (N910VVRU2CPD1) on Verizon Samsung Galaxy Note 4 (SM-N910V). Extended details about each step (e.g., rooting) can be found in the General Section of this forum.
Requirements:
Notes:
Instructions:
.
XDA:DevDB Information
Bootloaader Unlock, Tool/Utility for the Verizon Samsung Galaxy Note 4
Contributors
hsbadr, ryanbg, beaups
Source Code: https://github.com/beaups/SamsungCID
Version Information
Status: Beta
Created 2016-06-14
Last Updated 2016-06-13
Click to expand...
Click to collapse
Is there anyway us Verizon Edge guys can get our unlock binary updated for MM? :fingers-crossed:

[EOL] [Rom/Kernel] SM-G935D/SC-02H Marshmallow (May/06/17)

This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (Marshmallow)
TWRP 3.0.3-0: https://www.androidfilehost.com/?fid=817550096634747128
Rooted Rom: https://www.androidfilehost.com/?fid=385035244224413763
HKernel for hero2qltedcm:https://www.androidfilehost.com/?fid=745425885120706416
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/tw-6.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969

Reserved

travis82 said:
This will be for the Japanese variant of the s7 edge this is an unlocked model also.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (SC02HOMU1APL2)
TWRP: Coming soon
Debloated Rom: Coming soon
Kernel: Coming soon
Click to expand...
Click to collapse
Can this be used for sm g9350 hongkong?
Sent from my SM-G9350 using Tapatalk

Please use common sense and read ITS FOR THE JAPANESE VARIANT.. READ THE MODEL #. Good gosh stop posting stupid questions dude.

Thanks I'll try this when I get to work.
I can't seem to unlock my bootloader, I'm unable to flash TWRP and enter the recovery. It just says Recovery mode -> Warranty bit set: Recovery and enters into a normal boot after trying it a few times.
Edit:
used the official TWRP and recovery now works. Now trying to install the rom
Edit2:
When trying to install it keeps giving me the following error:
This package is for "SC-02h,hero2qledcm" devices; this is a "hero2qltedcm"
Update process ended with ERROR: 7
Error installing zip file '/sdcard/TWRP/SC-02H_Debloated.zip'
Edit3:
I edited the update-script and removed the assert.
However I don't notice any changes in the rom itself. It still has some bloatware (docomo stuff)

ahh ok i thought it would use sco2h not dcm I can fix that sorry, and I assume twrp is doing the same. I will use a dcm kernel in twrp, let me know if that kernel boots please I dont have the device in hand so I am relying on you all to let me know.
USE crom.apk to unlock bootloader you should find it in galaxy apps store. I'm pretty sure others have unlocked their bootloader doing the same thing. I also used to have someone install my hkroms and kernels on the jap variant so I know you can unlock the bootloader.
CROM: https://www.androidfilehost.com/?fid=385035244224394932
can you unlock the bootloader with that, its a link to what we used to unlock ours.
I need you to unlock your bootloader first please. Sounds like that is the issue.

If I run that app it just exits with Crom Service has stopped working.
Your rom works fine, it has root which is what I needed the most.
Just wish there was a way to remove the sim lock from the device without having to beg Docomo.

I bet I have my asserts all messed up here man I'm sorry. I see SC-02H than hero2qltedcm, than SM-G935D soo I need to get this in the correct order. Would you mind shooting me a pm so I can hangouts you so we can knocks this out quickly?

updated op with twrp recovery and kernel.

This works, root and most of the bloated software is gone

Off topic question (need some insight)
You have started to make a working TWRP for the Docomo variant - thank you for your work (hopefully people in JP using the Docomo version find success).
I know this is off topic but I thought you could provide me with a better understanding.
I am currently using the au KDDI variant (SCV33-Snapdragon) and have successfully installed TWRP (3.0.2-0) with ability to mount /data following xda, youtube, and a Vietnamese forum using google translate; BUT I am unable to keep TWRP ability to mount /data after flashing re-engineered boot file via odin to apply root (Snapdragon Variant Root). TWRP can still be used to go into recovery, mount /ext sdcard, and reboot. I've tried many different styles of rooting after and before installing TWRP, in addition to flashing in different ways - but I still failed. It's either have full working TWRP that can mount /data but without root; or, have root but TWRP that can't mount /data (basically useless as it cannot install anything nor, make backups).
I apologize for such long response, any insight or somewhere you can point me to where I can do more research, as this is how far I have come so far, but still fail to acquire both (Yes I have watched numerous YT vids and read countless post stating devs have not yet found a way on the US-Snapdragon variants, which I understand this may apply to the JP variant too) . Thank you.

With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?

SCV33 looks exactly the same as SC-02H. What's the difference? single sim dual sim? Can you use sc-02h roms for it? I need more information unless you guys want to start donating me devices.

bu06034 said:
With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?
Click to expand...
Click to collapse
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.

travis82 said:
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.
Click to expand...
Click to collapse
First, I really apprecate the work you have put in on bringing ROOT and TWRP to users in Japan. If I can help by doing some testing for you with my DoCoMo model, I'd be happy to do so!
Regarding my original question, I was not talking about an engineering kernel. I was thinking that if I flashed a custom ROM for the SG-935F Hong Kong (Exynos) model, and then flashed your kernel over it, would it work?
As I understand it, the kernel is the interface between the OS and the hardware. Maybe that is ignorant? The reason I ask is because this process was quite common for Japanese S4 users to employ custom ROMs for US S4s; i.e. Flash the US custom ROM (e.g. Mokee or Albee95) and then flash the Japanese S4 kernel onto it.
I understand the question might seem silly to you, but I don't have the hundreds of hours required to reach your level of expertise. I have invested sufficient time to understand much of the jargon; and the tools and methods employed to get root and flash ROMs. More than that, I rely on asking the experts, like you. :good:

you would have to port firmware framework and a bit of other things, secondly hong kong does not self exynos versions here. It's all Qualcomm.

SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82

SCV33 test 1
travis82 said:
SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82
Click to expand...
Click to collapse
Travis,
TESTED (Semi-working)
I've done some testing on my SCV33 variant using what you've made for the SC-02H.
[Kernel]
I flashed the HKernal Beta 2, using the SC-02H FW, and TWRP Unofficial you've provided onto my SCV33 Galaxy S7e and it is really snappy and fast. Very nice kernel. Any DoCoMo users out there should flash this - though still beta it does the job. I had no problems flashing this in TWRP.
[TWRP Unofficial]
I was able to mount all partitions - works. I had no problem flashing this using Odin.
[Problems I've Encountered]
* After rebooting into TWRP Unofficial many times. My log reads "Unable to mount /steady." I have no idea what this is or what partition it belongs too; but, TWRP is still able to do everything else such as mount /data, wipe /system, etc. - I don't think its a big issue to be honest. Just wanted to let you know.
* After installing everything and everything working fine. I do not/cannot communicate with networks (cannot connect to wifi, cannot call, and no data). I had check SIM status = not available, IMEI = Unknown, SN = Unknown. I had made an EFS back up of my KDDI rom with working network communication and restored with with TWRP Unofficial. Installation via TWRP log has stated successful, but upon reboot problem has not been fixed. Any ideas I should try? I also believe the software from the SC-02H OS handles how im about to connect to data towers and catch frequencies. Putting in my own APN does not work.
* Crom Service.apk you've provided at an earlier comment to unlock bootloader, which I've installed, does not work. All it does is FC when trying to open the app - installation is fine. I had also tried getting one from the internet, and looking for it at the Samsung Galaxy App Store - the internet one does the same, FC. Samsung Galaxy App Store does not have Crom Service available. I am assuming SCV33 wont ever be able to unlock bootloader.
* Debloated Rom Zip does not work, after doing a clean install to Stock Odin, installing TWRP Unofficial, system ext4 format, wiping /system /data /internal storage /dalvikArt /cache, and flashing Debloated Rom Zip with TWRP - states installed successful and boots up. Though upon booting I still have all the bloat there. In addition, many FCs from many different apps, even after reboot (e.g. tap and play, google play store, google services). The rom still functions after a couple more reboots after a /dalvikART cache wipe, but it just doesn't seem as fast as the stock one though. I believe this maybe a conflict due to my device, and myself as well.
----
Oh BTW the SCV33 is:
*SM-G935J
*OS 6.0.1
*Single SIM only
I will try my best do to other methods on trying to get this to fully work, but the Network Communication thing always halts my progress. I really dig this kernel man.
Again, thank you for your hard work and dedication to the Snapdragon Variant its very much appreciated :highfive:. Looking at the Exynos sub-forum I get so jelly at times.

OK is yours has a different modem then the rest. Also your partitions might be a bit different, I really need that device in my hands to look at the partition layout. If you can find SCV33 kernel source I will be more than happy to make a kernel for this variant also. I call my kernels beta because it's just how I do it.
Ok found your source for the kernel I'll check out the configs and maybe make a kernel later on this week.

SM-G935J (SCV33)
Here is a test kernel: https://www.androidfilehost.com/?fid=529152257862698452
Rooted rom: https://www.androidfilehost.com/?fid=529152257862698453
Let me know if there is any issues.

Tmobile lg g4 bootloader twrp supersu

Hi,
Im kind of late in terms of LG G4. But it it is now my curret phone. Have expierence installing unlock bootloader installing twrp and supersu on motorola phones. Owned a LG G2 and bricked it because of flashing wrong files.
There are alot of variants to LG phones...compared to motorola that create a higher risk.
So im trying to be cautious here.
Ive done my research and found this link.
https://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Can someone confirm that this will work on my LG G4 T mobile 20v with 6.0 marshmellow?
From what i understand i just skip the first step Flashing the imagee (because it is for the 20i) then continue with the normal routine? Is this twrp and supersu compatible?
Is there a way to restore my variant stock rom if i screw up?

Bigd1988 said:
Hi,
Im kind of late in terms of LG G4. But it it is now my curret phone. Have expierence installing unlock bootloader installing twrp and supersu on motorola phones. Owned a LG G2 and bricked it because of flashing wrong files.
There are alot of variants to LG phones...compared to motorola that create a higher risk.
So im trying to be cautious here.
Ive done my research and found this link.
https://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Can someone confirm that this will work on my LG G4 T mobile 20v with 6.0 marshmellow?
From what i understand i just skip the first step Flashing the imagee (because it is for the 20i) then continue with the normal routine? Is this twrp and supersu compatible?
Is there a way to restore my variant stock rom if i screw up?
Click to expand...
Click to collapse
These instructions are more up to date and accurate! - https://forum.xda-developers.com/tmobile-g4/general/how-to-unlock-bootloader-flash-twrp-t3344421
on line 10 change the command to 'fastboot boot recovery "NAME OF TWRP FILE" - this will boot twrp on the phone itself, then from phone install twrp and supersu from your microsd card
you need to put a copy of twrp in the adb/fastboot folder on your pc and twrp and supersu on your microsd card before starting, to avoid mistakes name them recovery.img and supersu.zip
latest twrp: https://dl.twrp.me/g4/twrp-3.1.1-1-g4.img.html
latest supersu: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip

rooted with recovery installed, thank you
can I flash any tmobile custom rom for the lg g4? or will it cause brick too?
phone is marshmallow

Seems to be something wrong with this TWRP....cant make a backup.....screen goes black...think phone is still on? have to take battery out....tried several times.
not flashing a custom rom till I can make a backup

deltadiesel said:
Seems to be something wrong with this TWRP....cant make a backup.....screen goes black...think phone is still on? have to take battery out....tried several times.
not flashing a custom rom till I can make a backup
Click to expand...
Click to collapse
Start the backup and wait at least 10 min. The screen should become responsive after the backup has finished - normally sooner but it is not crashing just using all power available.
.
Sent from my LG-H815 using XDA Labs

Did exactly that...was response after backup
Thank you

[ROM][8.1.0][OFFICIAL] AOSiP {T-mobile/Sprint}

Aosip for Motorola Z2 Force
What is this?
AOSiP is a quality custom ROM based purely on GOOGLE AOSP source since 6.0 release. Twisted with the latest features and blended with stability. We strive for perfection and it shows.
Obligatory Warning: This guide and ROM assumes you know the fundamentals of fastboot, flashing TWRP, and running a flash all. Your warranty is voided because of the unlocked bootloader. This is a Third Party ROM. Things may not work as expected compared to stock (for better or for worse).
Warning 2: If you can't do fastboot commands, do a flash all, root your device or flash TWRP/ROM, please do not ask for help here. If you cannot flash all back to stock, please stay stock for everyone's sake.
Warning 3: if you don't flash the firmware so you are on Oreo on both slots, when you boot after flashing, you'll be on Nougat firmware and have a brick. Try a flash all as that's your only hope on recovering your phone.
How to install
1. Download the latest ROM from here.
2. Prepare your phone for AOSP style ROMs. (download one of the firmwares depending on your model)
Flash the firmware with the .bat file. (See links below or on Post #2)
3. Boot to TWRP
4. Flash TWRP to boot image (with the zip from their website.) Reboot to Newly flashed recovery.
5. Erase oem, data, and system
6. Flash rom like you would any aosp rom, in twrp.
7. Reboot to bootloader
8. run the command "fastboot -w" (this will erase EVERYTHING from your phone, even internal SD, but is needed to have these ROMs work)
9. reboot.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Volte (T-Mobile)
Change quick charge
Fingerprint reader
NFC
Lights
Sound / vibration
Some motomods (soundboost mod doesnt work)
Team Illusion:
Josh Fox (xlxfoxxlx)
Akhil Narang
Sri Harsha (@srisurya95)
Shreesha Murthy
Brett Montague
Known issues
1. WiFi Calling hit and miss
2. Cannot flash Gapps (included temporarily)
3. some Audio recording apps will not have audio recording work (phone functions fine)
4. if you don't fastboot -w, you will not boot.
5. if you don't flash the firmware your bootloader might relock itself and be stuck on Nougat.
6. SElinux is passive (meaning CTS check will always fail until further notice.)
Downloads:
official link(aosiprom.com)
​Thanks to everyone at @aosip @mosimchah @moto999999 and @codeworkx for their amazing work
Android OS version: 8.1.0
Security patch level: April 2018
Build author: @Infect_Ed
Source code: https://github.com/AOSiP-Devices/device_motorola_nash - AOSiP source.
https://github.com/InvictrixRom-devices/kernel_motorola_nash - kernel
https://github.com/TheMuppets/proprietary_vendor_motorola - vendor blobs
Contributors
@Infect_Ed @invisiblek @npjohnson @erfanoabdi @joemossjr @jbats @nathanchance
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.4.x
Phone Firmware Required: 8.0
T-Mobile
Sprint
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-03-28
Created 2018-03-28
Last Updated 2018-04-10
Note: I did not build this. If you want to give thanks for this ROM build, thank @Infect_Ed for building AOSiP, I am just maintaining the support thread for XDA.

Firmware files needed!
T-Mobile:27.1
Sprint: Found em!

Sources Post:
https://github.com/AOSiP-Devices/device_motorola_nash - AOSiP source.
https://github.com/InvictrixRom-devices/kernel_motorola_nash - kernel
https://github.com/TheMuppets/proprietary_vendor_motorola - vendor blobs

Bug reports:
If you don't flash the firmware and your other slot is nougat, after flashing the ROM, you'll brick. (Custom ROM with a locked nougat slot.) Your only hope is attempting an official flash all and try again after flashing the firmware zip in the posts above.
Fair warning and off-topic: I am okay with some off topic questions. If you have a question, please use the search function. If I have addressed the question before, I will not answer and advise to find it in the thread. I will report the post for a mod to delete along with my response to keep the thread tidy. It seems some users think this ROM has international support. It doesn't and won't unless someone with another variant or an unlocked T-Mobile/Sprint model tests, confirms and debugs for that international carrier. Please keep in mind of what I said below regarding this. I posted this on page 20 or so and copying here for better visibility.
Your SIM is locked. You are trying to run a phone off it's intended network. Please don't post those problems here. It isn't ROM related. Like the thread states. It works for T-Mobile and Sprint only on their respective models on their locked networks. Any other tom foolery isn't supported and must be kept out of the thread. After this it will be considered off topic.
Edit: if you have Sprint or T-Mobile service and run into issues with using your (albeit, expensive) international roaming plan, I will assist with that if it works on stock but not AOSP. If you don't have a sprint or T-Mobile sim, I cannot help. Almost all devs on this device won't be able to help. "Almost" all of us are on US carriers.
Click to expand...
Click to collapse

Images posted here

@Uzephi is your device on sprint? Data works but LTE does not? Does the Moto Mods support Hot Swapping? This is great progress and can't wait to see more on this phone.

xDABZx said:
@Uzephi is your device on sprint? Data works but LTE does not? Does the Moto Mods support Hot Swapping? This is great progress and can't wait to see more on this phone.
Click to expand...
Click to collapse
Motomods work with kernel in ROM (hot swapping should as well iirc, I don't use the mods that often where my projector is outdated) LTE doesn't work on Sprint, but 3G and 1xTT works fine.

@Uzephi if we were to flash your kernel, we would lose motomods support?

cervantesjc said:
@Uzephi if we were to flash your kernel, we would lose motomods support?
Click to expand...
Click to collapse
For now, yes. Still trying to get it work. Clang is being a PITA on my build box, having to go to Linaro which can't build the Motorola Greybus driver correctly.

Thanks sir, I appreciate what you've done for the community, finally can go back to my moto from a GS8+

I'm sorry if this is a dumb question but...
Ive never had to install different firmware before on a ROM. If I install this, will it change the process of installing a different ROM in the future?
Thank you.
Sprint varient if it matters by the way.
Edit: I'm sorry for this but is there a way to do this without the .bat file? currently working on OSX

wcain89 said:
I'm sorry if this is a dumb question but...
Ive never had to install different firmware before on a ROM. If I install this, will it change the process of installing a different ROM in the future?
Thank you.
Sprint varient if it matters by the way.
Edit: I'm sorry for this but is there a way to do this without the .bat file? currently working on OSX
Click to expand...
Click to collapse
Open the bat file in a text editor and run each of those commands one by one.
This I'd a dual boot device. Your other slot has the older Nougat bootloader. That firmware flashed the current Oreo firmware to both slots. If you don't do that, and you flash one of these ROMs, you'll reboot to your nougat slot, locked and pretty much screwed without a flash all and luck of being able to flash OEM images in oem mode.
Edit: you won't need to flash this any consecutive times until there is another big firmware update like nougat to Oreo was.

Uzephi said:
Open the bat file in a text editor and run each of those commands one by one.
This I'd a dual boot device. Your other slot has the older Nougat bootloader. That firmware flashed the current Oreo firmware to both slots. If you don't do that, and you flash one of these ROMs, you'll reboot to your nougat slot, locked and pretty much screwed without a flash all and luck of being able to flash OEM images in oem mode.
Edit: you won't need to flash this any consecutive times until there is another big firmware update like nougat to Oreo was.
Click to expand...
Click to collapse
Thank you for the quick reply. I've installed the firmware, but now when I boot to TWRP and try to install the ROM, it instantly fails with ERROR:1. Tried redownloading with a different browser but got the same result. I feel like I'm missing something obvious.

wcain89 said:
Thank you for the quick reply. I've installed the firmware, but now when I boot to TWRP and try to install the ROM, it instantly fails with ERROR:1. Tried redownloading with a different browser but got the same result. I feel like I'm missing something obvious.
Click to expand...
Click to collapse
Flash twrp zip to your phone, reboot to your phone's newly flashed twrp recovery and flash the rom. If I remember right,you need to wipe oem and system before flashing the ROM as well. I'll add that shortly.

Up and running! Thank you!! Still looking around but I do see a built in updater. Will this function 100%? By that I mean, when the Sprint LTE issue is resolved and whatever else is coming will be handled by the updater?
Thanks again very excited to play around.

wcain89 said:
Up and running! Thank you!! Still looking around but I do see a built in updater. Will this function 100%? By that I mean, when the Sprint LTE issue is resolved and whatever else is coming will be handled by the updater?
Thanks again very excited to play around.
Click to expand...
Click to collapse
Yes, since it's official, it checks the link in OP for any new updates.

For anyone using the ROM, are you seeing notification dots, I tried to get them to work, but they're not working for me.

cervantesjc said:
For anyone using the ROM, are you seeing notification dots, I tried to get them to work, but they're not working for me.
Click to expand...
Click to collapse
Working fine for me thru Evie Launcher. Soundboost mod is broken though. My SoundBoost is recognized and the notification says the mod is attached, but the volume steps are reduced to on/off and no sound comes out.
Edited to reflect that only the sound boost mod isn't working AFAIK.

wcain89 said:
Working fine for me thru Evie Launcher. Mods are broken though. My SoundBoost is recognized and the notification says the mod is attached, but the volume steps are reduced to on/off and no sound comes out.
Click to expand...
Click to collapse
Oh, @npjohnson and @invisiblek don't have the sound mod, so they can't get it to work. All of us in the development discord are trying to mail one out, they can't guarantee when it would get fixed.
Edit: added disclaimer to OP. We can only guarantee what we have works. Like when I do my kernel, the only mod I have is the free projector, so that's the only mod I can guarantee works when I do get it working.

I have an extra soundboost I could mail to someone.