Help! Moto G xt1064 - G 2014 Q&A, Help & Troubleshooting

So I'm currently running the newest version of Blisspop on my phone. I was at work earlier this evening, and my phone rebooted. However it never came back. Its stuck on the "Warning Bootloader Unlocked" screen. I was able to access fastboot, however whenever I would choose anything it would immediately go right back to the warning screen. Except when I choose recovery. It goes to the recovery splash logo, and freezes there. I don;t know what to do, as I don't have USB Debugging enabled on the device. Is there anything anyone can do to help me? Thanks guys!

Better you flash stock firmware via fastboot mode by PC and take a complete backup of stock ROM before you proceed.

I would, however, I can't enable USB Debugging.

Related

[Q] Bricked L70

Hi,
so I rooted my phone, unlocked the bootloader, installed TWRP, put in 3 different ROMs on my External SD card, went ahead, deleted EVERYTHING from the phone, tried flashing ROMs, not a single one worked.
I rebooted the phone because I saw no other option, TWRP said that there is no OS, I went ahead and did it.
Now the phone won't start, I tried returning it to stock firmware as per lg-phones website guide (worked before, though my phone was not this messed up, I could access download mode and now I can't), but I keep getting connection problems. I have tried doing this with the phone just "turned on", it hangs on LG logo for infinity.
When I try putting the phone in download mode, the only thing I get is fastboot. When I try to use adb devices and other similar commands, it says device not found or simply does not list it, regardless of the "mode" the phone is in. However if I try and use LAF RECOVERY MULTITOOL, it detects my phone and I can use fastboot commands. I have custom recovery, boot and laf imgs on my PC, I tried flashing them all, PC and phone tell me everything's ok, but when I restart the phone, I get nothing... what am I doing wrong, and can this be fixed? If you have any questions, I'll answer to the best of my ability.
Thanks in advance!
SOLVED!!!!
Just found a backup laf.img that enables download mode... PHEW!

xperia Z3c bootloop after flashing CWM

I recently got a z3c and decided to try to get a slim rom on it.
I have done the following:
I unlocked the bootloader.
This was done successfully to the best of my knowledge
The next thing I did was flash a cwm image to by z3c using fastboot. The problem was that I flashed the z3 version on my z3c.
The device would boot but the screen would be blank.
Later I flashed the z3c boot loader named : Z3c_DooMLoRD_AdvStkKernel_v01_FW-105
After this the device goes in a boot loop. I am able to access CWM.
I have tried to root the phone as well as flash the slim rom in an attempt to fix it....
Wiping disk / cache doesn't help.
Also for some reason even though adb drivers are installed I cannot use it so I can't get the twrp install to work.
I have no idea what to do can someone please help?
Thanks,
stp
I have same issue....Phone is ib bootloop...i can still go to fastboot mode....
Anything can be done here????
Flash an factory image with flashtool then you will have original recovery. Then reinstall CWM, maybe smth went wrong.
Tried flashtool---Ended up with errors as attached pic
As i cant bootup my phone...USB Debugging option cant be ticked
I was running SlimLP (unofficial) while bricked my phone....
Anything on that please....
I managed to recover my phone. I don't think you need usb debugging for flash tool. What I did was turn the phone off (power and volume up seem to be the buttons that force shutdown and break the reboot loop).
flashtool will prompt you to connect when you flash the ftf file and you hold power up and volume down when you connect the usb cable. If you have issues flashing (it hanged on me on system.bin) try restarting your computer.
Resolution and Problem Exp
Right after flashing the device recovery through fastboot the USB cable is plugged and that seems to loop the boot loader, so you need to force shutdown while looping by pressing POWER + VOLUME UP, and after that unplug the USB cable. You will notice that on boot now the light is no longer red.
splitthepositive said:
I recently got a z3c and decided to try to get a slim rom on it.
I have done the following:
I unlocked the bootloader.
This was done successfully to the best of my knowledge
The next thing I did was flash a cwm image to by z3c using fastboot. The problem was that I flashed the z3 version on my z3c.
The device would boot but the screen would be blank.
Later I flashed the z3c boot loader named : Z3c_DooMLoRD_AdvStkKernel_v01_FW-105
After this the device goes in a boot loop. I am able to access CWM.
I have tried to root the phone as well as flash the slim rom in an attempt to fix it....
Wiping disk / cache doesn't help.
Also for some reason even though adb drivers are installed I cannot use it so I can't get the twrp install to work.
I have no idea what to do can someone please help?
Thanks,
stp
Click to expand...
Click to collapse

[Q] My phone is stuck at message "warning: bootloarder unlocked"

Hi, I have a Moto X with Cyanogenmod 12.1, unlocked bootloader and twrp.
the problem started out of nowhere, i simply picked up my phone and noticed it was turned off.
now when i try to turn it on, it is stuck at the bootloader unlocked warning message.
i can go into fastboot, but when i choose anything it just goes back to that message, except when i choose recovery: in this case it goes to the TEAMWIN screen and is stuck there. can't go into the options.
when i connect it to my pc it says error 43 and fastboot doesn't recognize it.
can someone help? I can't even turn off my phone.
I even tried the ressurect thread but it's not the same problem I think
Have you sorted this out yet? @ocmilo If not, it is a cable issue, a usb port issue, or most likely a driver issue. Look into each of these and report back.

New update bricked my phone

I was hoping I could get some help with this, I don't have an unlocked bootloader and everything is unfortunately stock, so here's hoping.
I was upgrading with verizon's upgrade tool while plugged into my computer and it got about halfway through updating before just stopping. Now the phone just automatically boots into fastboot flash mode. When I try to select any option aside from power off, restart bootloader, or barcodes it just flashes the motorola logo and goes back to the menu and the log says it failed to validate the system image. I looked at the unbrick thread and got nowhere and when I try to use the fastboot upgrade option with what I believe is the right image it gives me an not found error.
Is there anything I can do or is this just a paperweight now?
EnormousAxe said:
I was hoping I could get some help with this, I don't have an unlocked bootloader and everything is unfortunately stock, so here's hoping.
I was upgrading with verizon's upgrade tool while plugged into my computer and it got about halfway through updating before just stopping. Now the phone just automatically boots into fastboot flash mode. When I try to select any option aside from power off, restart bootloader, or barcodes it just flashes the motorola logo and goes back to the menu and the log says it failed to validate the system image. I looked at the unbrick thread and got nowhere and when I try to use the fastboot upgrade option with what I believe is the right image it gives me an not found error.
Is there anything I can do or is this just a paperweight now?
Click to expand...
Click to collapse
Was anything non-stock on your phone when you tried the update?

Bootloader Loop

Hey, I have a Moto X 2014. I'm running a cynanogen mod on it. For some reason the phone is stuck in bootloader mode, then starts up with the cynanogen logo, then just goes back into bootloader and repeats. I've held the power and lower volume key to get into the bootloader menu. I've tried normal, recovery, and factory and nothing seems to work at all. I cant seem to figure out how to get into TWRP, which I think if I can that could solve the problem by wiping some data and flashing a new ROM. Any thoughts or ideas how to fix this? Also, the phone wont show up as registered on my computer when I plug in the USB cord, so an command prompt "adb recovery" isn't an option I think. If you need more specifics please ask! Really dont want to have to get a new phone.
You can try to enter recovery through the PC command 'fastboot reboot recovery'. If that doesn't work, look up how to flash the stock firmware using fastboot.

Categories

Resources