Hi people,
I have just got a Galaxy Tab just for kicks. It's a P1000L brazilian one.
I want to unbrand it (it's Claro branded, the operator took out Gmail and Gtalk, also assigned search to Yahoo instead of Google), so I have talked to a friend which also has a Galaxy Tab, same model, but unbranded, all Google apps inside.
My FW is (or was ) P1000LVJJJ4, and his FW is P1000LVJJM9, so I went to this thread at TheGalaxyTabForum, downloaded the P1000LVJJM9 FW, PIT file and ODIN 1.3.
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
I have read about the process and started doing it. Here's what happened.
I haven't checked the partition option, just put the PIT file and the FW file in the correct fields, put my Tab in download mode, clicked start... and after some time, almost at the end, ODIN failed. My Tab got stuck in download mode, yellow triangle. I got it disconnected from the USB cable, than put it again. Restarted the process, but ODIN got stuck in setup connection.
I took my Tab off the usb cable again, it was still stuck in download mode, yellow triangle. Pressed the power button for a while, it has turned off completely. Now it's bricked, maybe dead. No life signal, nothing happens when I press any button or button combination, nothing is shown when connected to the charger or USB, not recognized in KIES and ODIN, nothing at all.
Is there any hope for me? What can I do to solve this?
i have the same problem, did u get any solution???
Hmm, if nothing happens on screen at all either when you plug it in or hold the power button, that's very bad...
Otherwise, I think the most you can do is either let it charge for I think a few hours and then see what happens
volume down + power
Tab will not respond but plug it in the pc anyway, odin will normally recognize it even without the "android shoveling" screen.
flash stock GB
download all the needed files from this page.
http://www.teamovercome.net/p1000/?page_id=17
Phantom1275 said:
Hi people,
I have just got a Galaxy Tab just for kicks. It's a P1000L brazilian one.
I want to unbrand it (it's Claro branded, the operator took out Gmail and Gtalk, also assigned search to Yahoo instead of Google), so I have talked to a friend which also has a Galaxy Tab, same model, but unbranded, all Google apps inside.
My FW is (or was ) P1000LVJJJ4, and his FW is P1000LVJJM9, so I went to this thread at TheGalaxyTabForum, downloaded the P1000LVJJM9 FW, PIT file and ODIN 1.3.
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
I have read about the process and started doing it. Here's what happened.
I haven't checked the partition option, just put the PIT file and the FW file in the correct fields, put my Tab in download mode, clicked start... and after some time, almost at the end, ODIN failed. My Tab got stuck in download mode, yellow triangle. I got it disconnected from the USB cable, than put it again. Restarted the process, but ODIN got stuck in setup connection.
I took my Tab off the usb cable again, it was still stuck in download mode, yellow triangle. Pressed the power button for a while, it has turned off completely. Now it's bricked, maybe dead. No life signal, nothing happens when I press any button or button combination, nothing is shown when connected to the charger or USB, not recognized in KIES and ODIN, nothing at all.
Is there any hope for me? What can I do to solve this?
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showthread.php?t=1133590 !!!!!
Greets.....
hi,
anybody have a guide to reflash my Gear to offiziell Firmware?
Ich have flashed the Null_17 firmware and ic want now to undo it...
pls. need help to do this...
i have odin 3.09 and the firmware DBT-V700XXUAMK7-20131116161209
what now?
If the gear is on press and hold the power button till you see Rebooting.....then press the power button 4 to 5 times You come to a screen that has 3 options I believe but use your power button and tap down to download mode then press the power button for 3 seconds and let it go you should be in download mode now attach the gear back to the cradle open up Odin and connect the gear make sure you see the ( com )come up on Odin that means odin recognizes your gear ( please b4 this make sure you have all required drivers installed ) now on the Odin screen tick AP and choose Gear tar file tar, taz etc.let it load then
Untick Auto reboot ..now click start and let it rip when done detach gear from the cradle press the power button on the gear for 3 seconds when booted up you should be back on stock
Sent from my SM-N900V using Tapatalk
grrr...
i have all you say make it,but now...
after reboot..
freeze with the "samsung" logo... and he do nothing more...(yes i have wait more then 10 min.)
and now?
Just go to dowload mode again and reflash
Sent from my GT-I9505 using XDA Premium 4 mobile app
my samsung galaxy tab 3 lite SM-T111 hang and bootloop. when i pressed power button display only show samsung galaxy tab 3 lite and reboot continuously . i tried to enter recovery mode but only show green android robot with red triangle ( NO COMMAND ) then reboot. i tried to flash stock recovery with odin from v1..83 to v3.10.6 not work and always fail. tried different usb port on my pc same result. ovver 48hours i tried to find my problem ( use google) but not work. i really apretiated if somebody help me sorry for my english.
I'm having the same problem
Samsung S3 Mini bricked please help
I have a Samsung Galaxy s3 Mini
I rooted it and tried to flash a rom but it was not compatible so my phone got bricked
I tried fixing it with Odin,at which first it was working but then the cable was accidentally removed from the USB port
Now it says firmware upgrade encountered an issue select recovery mode from Kies
I cannot go into recovery or download mode
The only time the phone turns on is when it is plugged in
And then it just loops on the Odin mode screen
I cannot connect to pc because it continues to loop when connected
So can someone with a kind heart PLEASE HELP ME
*Kyle* said:
I have a Samsung Galaxy s3 Mini
I rooted it and tried to flash a rom but it was not compatible so my phone got bricked
I tried fixing it with Odin,at which first it was working but then the cable was accidentally removed from the USB port
Now it says firmware upgrade encountered an issue select recovery mode from Kies
I cannot go into recovery or download mode
The only time the phone turns on is when it is plugged in
And then it just loops on the Odin mode screen
I cannot connect to pc because it continues to loop when connected
So can someone with a kind heart PLEASE HELP ME
Click to expand...
Click to collapse
download stock firmware from SamMobile
Remove the battery & wait for 1 minutes. Then insert the battery.Connect your mobile to pc it will vibrate in 5 seconds(while vibrating Press and hold ‘Volume Down + Home + Power’ buttons together and release them once a Warning screen shows up on your device
Press ‘Volume Up‘ to accept the warning and boot into download mode.
Note- download mode only work when your press the the buttons while vibrating)
Open odin & flash stock Rom
Don't unplug the usb port while flashng
Hello!
I tried to root my new S2 T810 via the instructions in this youtube video: watch?v=tgrdq66P5Jk
Here's exactly what I did:
Step 1. Downloaded Odin and autoroot kernel file
Step 2. Installed Galaxy Tab S2 driver
Step 3. Extracted the Odin file.
Step 4. Booted Galaxy Tab S2 into download mode
Step 5. Pressed and held the three buttons Power + Home + Volume down together until I saw warning screen. Pressed Volume Up to continue to download mode.
Step 6. Double clicked on extracted file of Odin, Odin3.exe , opened the Odin window
Step 7. Connected your Galaxy Tab S2 to PC now using USB cable. Saw Odin: Added!! message
Step 8. Loaded the autoroot kernel file into Odin.
Step 9. Clicked start button In Odin, it said Pass!! ; red android with pirate eye came up, program ran, device tried to boot and now it's stuck at Samsung logo flashing....
Did I miss something? What can I do to fix this? Tried to factory reset and it did not work. Do I need to flash back to a factory file? If so.. where can I find this?
Samsung has an "Emergency Recovering" program. Google for it. I used it successfully.