I'm not sure if there is only one kind of firmware and I only caught "firmware" as it flashed by during uninstall. I haven't got this far...up to now I've only flashed Roms and themes. Please help and I need it to be specific, step by step. I know it's a lot to ask.
Cid vzw_001 (with ATT SIM/service)
Hboot 1.57
Radio 1.13.41.0909
V32.120.247.0909
Been running viper 6.2
Stock: kitkat 4.4.2 sense 6
I can't afford another phone...
Related
Hello guys, I tried the new GPE 4.4 rom flashing the RUU, and I am pretty disappointed on this update...so I decided to return back to sense...
1) A 4.3 sense 5.5 RUU zip would be great, I searched for it but I can't find nothing, anyone?
2) OR...what if I flash a sense rom on top of the 3.58 GPE firmware? is this correct to do? have I got to flash the radio?
3) OR, again...if there is no RUU and I can't flash a sense rom with radio on KK fw, I think I have to flash 3.62 fw with radio and a rom...no?
I like clean things, because of this I ask for a RUU, is better wipe everything and clean flash...all in one and ready to go...thanks in advance!
Cheers
throcker said:
Hello guys, I tried the new GPE 4.4 rom flashing the RUU, and I am pretty disappointed on this update...so I decided to return back to sense...
1) A 4.3 sense 5.5 RUU zip would be great, I searched for it but I can't find nothing, anyone?
2) OR...what if I flash a sense rom on top of the 3.58 GPE firmware? is this correct to do? have I got to flash the radio?
3) OR, again...if there is no RUU and I can't flash a sense rom with radio on KK fw, I think I have to flash 3.62 fw with radio and a rom...no?
I like clean things, because of this I ask for a RUU, is better wipe everything and clean flash...all in one and ready to go...thanks in advance!
Cheers
Click to expand...
Click to collapse
The firmware and radio is mainly for stability issues and some optimizations. if your device is s-OFF you can flash new roms doesn't matter if they are sense 5.5 or aosp or gpe editions. If you want to return back to 3.64 fw hboot 1.55 you can find that in the RUU mega thread in the HTC One Android sticky section. when flashing the RUU make sure you have super CID or flash the correct versions or else it will not let you force flash it.
If you convert to Developer Edition (3.22.1540.1), you will have 4.3 and Sense 5, but 4.4 with Sense 5.5 will be released as an OTA update in a few days. I'm sure OP knows better than to use superCID. It will prevent you from receiving OTA updates. Always use the proper CID for the firmware you're using (unless it's a custom ROM or something that you wouldn't want to do an OTA on). If you convert to the International version (3.62.401.1), you will have 4.3 with Sense 5.5, but be waiting until January for the Android 4.4 update. There's no real difference between the two. They're both world-wide variants, but the Developer Edition gets updated well before any others.
For Dev Edition, change CID to BS_US001
For International, change CID to HTC__001
For Dev Edition, MID must be PN712000
For International, MID must be PN710000
To flash from GPE, you may need to downgrade your Bootloader first. It was a nightmare for me getting off of GPE until I figured that part out. I assume you're already S-Off. Sneakyghost provided 1.44 bootloader can be downloaded here http://d-h.st/qfc
I rooted my phone and flashed a custom rom onto it and now id like to go back to Stock Rom, but Im still S- ON and the only return to stock methods i found require S-OFF and ive found RUUs but have no idea what they do. Could someone Explain how to return to root and what an RUU is and what it contains? ( HTC ONE M8 SPRINT)
the S-OFF requirement is for setting the hboot's tampered flag back. if you just want to go stock run a RUU(Rom Update utility)
your post doesn't make much sense, you start out with going to stock then ask how to return to root. also most of your question could have been answered from a simple search, e.g what is a ruu?
Hello,
I recently rooted my M8 and have run into difficulties trying to run the GPE 5.0.1 ROM. I have TWRP installed and have no issues installing the GPE Rom itself, however, when I try to use WIFI the radio doesnt turn on and is unresponsive. Doing a little research I found it was due to my old firmware. So I tried to install the newest Firmware from the thread on M8 Android Dev, but when I try to use the RUU and the FUU, my phone is not recognized by the software. I tried to flash via HBOOT and it just asks me to reset my phone and doesn't do anything. Since I was S-ON I made sure I was using the full firmware for all of the methods, but it wouldn't work. So I tried to S-OFF my phone to see if that would help, but Firewater has been discontinued and I can't get Sunshine to run on my rom, so I am unable to S-OFF. I was wondering if anyone had any advice as to how I could get my phone S-OFF as well as to the new firmware.
Thank you.
You have to be running a stock rom when you use Sunshine
Hello, I have been searching for about 2 months trying to fix my issue and I have finally decided to give in and seek some assistance from this wonderful site.
Current Setup: HTC One m8 Harman Kardon, S-On, Unlocked Bootloader, CM11, TWRP 2.7.0.2 (Sprint)
End Game: S-Off, Running GPE Lollipop.
I believe I need to return my phone to stock in order to use Sunshine to S-Off and update my firmware so that GPE Radios will work. I have installed the stock Sense 6 ROM 4.4.4 (Wireless not working) but now am trying to install an OTA software update. (Currently on 3.30.654.2) From what I understand I need to install the stock HTC Recovery, however My CID is SPCS_004 and I can not find a recovery for that. Also, what is the process that I should follow when flashing stock recovery, Do I flash recovery and then install the OTA? Will I need to lock my bootloader? I am so turned around in this process that I don't really know what Direction to go in, any help is greatly appreciated.
tl;dr: I need a stock recovery for HTC One m8 Harman Kardon (CID SPCS_004) and can't find it anywhere.
I have finally figured it out!
For others having this issue that may stumble upon similar issues. I focused on returning my phone to stock.
Flash stock HTC Sense 6 4.4.4
Flashed stock recovery 4.16.401.10
I then locked my bootloader
Ran RUU 4.20.654.10
HTC then accepted and Ran the OTA
I am now on Sense 6 running 5.0.1 with stock recovery and a locked bootloader.
I will be making a back up (saving it to my google drive to avoid this issue in the future) and flashing GPE.
This can be closed if need be.
edCactus said:
I have finally figured it out!
For others having this issue that may stumble upon similar issues. I focused on returning my phone to stock.
Flash stock HTC Sense 6 4.4.4
Flashed stock recovery 4.16.401.10
I then locked my bootloader
Ran RUU 4.20.654.10
HTC then accepted and Ran the OTA
I am now on Sense 6 running 5.0.1 with stock recovery and a locked bootloader.
I will be making a back up (saving it to my google drive to avoid this issue in the future) and flashing GPE.
This can be closed if need be.
Click to expand...
Click to collapse
=====================================================================================================
Can you please send me the steps and links to download the firmware and rom
Shariff1980 said:
=====================================================================================================
Can you please send me the steps and links to download the firmware and rom
Click to expand...
Click to collapse
Did you ever get a reply?? I'm stuck in this exact situation.
Anyone know where I can find a stock Lollipop Sense ruu that I can flash to restore an M7 back to stock?
Previously I have been using a euro JB based ruu from htc1guru, but it's a pain starting out on Jellybean, and upgrading from there but that website only goes up to a Kitkat radio for a euro base ruu, and even then I ran into issue flashing kitkat ruu.
I am super CID and s-off of course. I always flash 1.44 hboot prior to doing the above.
I need the zip by the way, not an exe as I am running linux on my laptop.
Thanks.
maritimesbob said:
Anyone know where I can find a stock Lollipop Sense ruu that I can flash to restore an M7 back to stock?
Previously I have been using a euro JB based ruu from htc1guru, but it's a pain starting out on Jellybean, and upgrading from there but that website only goes up to a Kitkat radio for a euro base ruu, and even then I ran into issue flashing kitkat ruu.
I am super CID and s-off of course. I always flash 1.44 hboot prior to doing the above.
I need the zip by the way, not an exe as I am running linux on my laptop.
Thanks.
Click to expand...
Click to collapse
HI bob, look at the sticky threads in the general section. Don't forget that you need at least hboot 1.57 and a 6.xx.xxx.x firmware (version-main) to flash a Lollipop RUU.