Database Develop

SimLock Solution For All 4.3 users

Hello to you all
I would like to show all of you 4.3 users the solution "elvisypi" gave me in my private mail and finally i succeed to unlock my device.
So all of us know that sprint or google changed the way HtcOMADM works and we can't use the original system for unlocking our device.
So here is the solution that "elvisypi" gave me :
1. Download the "Stock with goodies 4.3 ROM". Don't flash it wet. (link : http://www.mediafire.com/?9y21d2wlszh6d6c )
2, With an archive viewer like winzip open the ROM.zip and go to /system/app
3. replace 2 apps which I have attached: HtcOMADM_SettingsPlugin_SPCS.apk and HtcOMADM_SPCS.apk. Just drag and drop and replace.
4. Finally flash the ROM.
5. Install the HTCOneSIMUnlockHelper and follow the onscreen instructions.
This system works 100% and this way you can be on 4.3 rom and still have an unlock GSM sprint device.
again , many thanks to "elvisypi" for his great support

sim unlock
Hope it does
downloading....

Would this work with other ROMs like insercoin?

phatmanxxl said:
Would this work with other ROMs like insercoin?
Click to expand...
Click to collapse
You must use a stock rom for this to work

Hey, are you using this with Tmobile or another service?

syedinsane said:
Hey, are you using this with Tmobile or another service?
Click to expand...
Click to collapse
I'm not using t-mobile , I'm not from the US but it should work with any GSM sim after the unlock is done

james341 said:
I'm not using t-mobile , I'm not from the US but it should work with any GSM sim after the unlock is done
Click to expand...
Click to collapse
I've followed your directions, using the ROM you provided (only difference being flashing the root-fix) and I get vDM errors every time I boot and the app says it's unlocked but my Tmobile SIM gets no signal. Is there any other way i can check if my phone's unlocked?

syedinsane said:
I've followed your directions, using the ROM you provided (only difference being flashing the root-fix) and I get vDM errors every time I boot and the app says it's unlocked but my Tmobile SIM gets no signal. Is there any other way i can check if my phone's unlocked?
Click to expand...
Click to collapse
Did you changed the phone in settings to GSM/UMTS?

james341 said:
Did you changed the phone in settings to GSM/UMTS?
Click to expand...
Click to collapse
Yes I have, it says preparing SIM card but I never get any bars. I read in another thread that I need to be on an older radio in order for Tmobile to work. And for that I'll need s-off which I can't. Sigh.

syedinsane said:
Yes I have, it says preparing SIM card but I never get any bars. I read in another thread that I need to be on an older radio in order for Tmobile to work. And for that I'll need s-off which I can't. Sigh.
Click to expand...
Click to collapse
Flash the release radio and let us know, I'm interested in using an At&t card for when I need a good data connection.

[/COLOR]Delete
Sent from my HTCONE using XDA Premium 4 mobile app[/QUOTE]
Sent from my HTCONE using XDA Premium 4 mobile app

It didnt work for me?
I did exactly what you said an When the phone starts up it says unfortunately ui has stop working an it keeps popping up an i cant do anything with my phone

Thank you for this already pressed the Thank you button also
i was getting annoyed that i couldnt find the files before i found this thread

HTC ONE
I did everthing s-off....flashed to the old radio baseband....tried everything still havent got any signal....who know what a problem?
The only thing is that I've flashed my sprint htc one to the Straight talk. Could it cause a problem?

I am also trying to unlock for T-Mobile. Running into the same issues as others. I was reading a thread where someone was apparently using it on T-Mobile, and PMed them on how exactly they did it but never got a response.
Would love to hear if anyone has it working on T-Mobile

This works. :victory:
Only need to extract, modify and zip again.
Flash with TWRP.
And everything is working normally, no need to reinstall or root, or whatever.
The only problem is that every time I turn on the phone, I get the error message VDM, but it disappears instantly, without stopping or forcing any application.
I live outside the U.S., and continues to operate all perfect with SIMUnlockerHelper. :fingers-crossed:
My device: Sprint Htc one = Unlockboot, TWRP, SIMUnlocker Helper, Root, and the rom on the top of the post. (benny's 4.3 LOL)

it actually works, but if you're using a sense rom I think you only need to download the apps in the op and replacing in system/app
I did this with insertcoin 6.0-4, the unlock helper app didn't recognize the rom, but with the terminal emulator method it worked just fine, tried with a sim and all fine ... then put again the original apks and you don't have to deal with any error popups

Interesting. I was under the impression that our version of this device did not support domestic (only international) GSM bands, hardware wise.
Is this version of sim unlocking different than what you would get if you asked Sprint? (they do allow you to unlock it if you meet certain criteria, like good account standing)

cbburtraw said:
Interesting. I was under the impression that our version of this device did not support domestic (only international) GSM bands, hardware wise.
Is this version of sim unlocking different than what you would get if you asked Sprint? (they do allow you to unlock it if you meet certain criteria, like good account standing)
Click to expand...
Click to collapse
it supports the bands, but all the radios except the original one block domestic gsm carriers. if you still unlock and use that radio, it'll work.

Not working
I tried everything mentioned above, ( Unlock bootloader, S-OFF, Root) also changed the 2 apps in the system for the 4.3 ROM Stock rooted deodexed and then used the SIM unlock helper.
Then Got the same result : No GSM signal, and the SPRINT logo still on the top when I make a call, the same answer comes: " Error number 16 script 3."
I'm using Straight Talk Sim by ATT.

Domestic Unlock of 4.3 & 4.4.1 (NAE) galaxy s4

Okay, I just got through doing this myself and it seemed that nowhere was this all said at once, or at all. So I thought I'd whip up a quick tutorial concerning how to Domestic Unlock the Samsung Galaxy S4 on any of the newer bootloaders/firmwares/modems. (Knox-enabled)
I did this on both a 4.4.1 galaxy and a 4.3 galaxy- one one NAE and one on MK2
First, for anything to work your modem must be an older one, like version MDL. Download the file SPH-L720_MDC_Modem.exe which is a one-click
Odin .exe that will flash ONLY your modem to MDL.
Steps- put into download mode by taking the battery out and putting it back in. Hold the volume down button, the home buttone and then press the power button. When it vibrates, let go. Press volume up.
Run the SPH-L720_MDC_Modem.exe odin one-click installer.
Connect the usb to computer from phone
when com[24] or whatever shows up, press start.
Now, for the domestic lock to work you first need to do the international unlock @ http://forum.xda-developers.com/showthread.php?t=2415587
It's real easy and explained well at the link above, but I'll run through it quickly anyways.
Download the s4unlocker installer from the post linked above.
Put your phone into diag mode by dialing ##3424#. Press Qualcom button and select the bottom selection.
connect (if it wasn't already) usb from phone to PC
You already installed the proper samsung drivers, right? If not, you'd better do that now.
Okay, now run the s4unlocker and press the scan and unlock button, then wait for the phone to reboot.
Now for the Domestic Unlock part.
Follow the directions at http://forum.xda-developers.com/showthread.php?t=2530610
I'll run through it real quick, too because there were a few things I wanted to mention.
dial *#0011# (or #*0011#, I can't remember)
when it comes up "No service", press the menu key on the bottom left of your phone. This brings up a menu (wow!), on which you should press "back"
Now press the menu key again and in the menu select "key input" A box will open up asking for you to type in something- enter a "1" and then press the enter key BEFORE hitting the OK button. Mine would not work unless I did this.
Now wait, sometimes it takes a good couple of seconds to give you the menu. Follow the rest of the directions from the above link, setting all the settings to what is stated. EXCEPT where he says to set all the preferences to WCDMA ALL, GSM ALL and LTE ALL. When I selected one, however, an asterisk appeared after my selection leading me to believe that you can only select one of these and so I set mine to GSM ALL and left the others alone. This worked for me, so I thought I'd mention it.
Now that you've manually rebooted after following the directions, you still have to edit your build prop to allow you to edit the apn settings. To edit your build.prop you must be rooted so root with CF auto-root http://autoroot.chainfire.eu/ download the proper one for the galaxy s4.
It's just an odin flash, so enter download mode
load up odin 3.x
hit the pda button and select the cf auto root tar
hit start.
After rooting I found that one time I had to do some of the service mode settings again and one time I did not, so I mention it here even though I think I had to because of some other error I had made at the time.
Go to play store and download build.prop editor and APN settings Shortcut
Load the build.prop editor and add these two lines to the end of the file
ril.sales_code=LOL
ro.csc.sales_code=LOL
Now reboot manually
add the apn settings widgit to the main screen and open it
click on menu and add an apn
Enter the apn settings for your carrier here. They're all different,(the carriers) but you can find them(the apn settings) easily with google, since they (carriers) all post their apn settings on their webpages.
Don't forget to save the apn settings.
Now select it.
Now reboot, since it couldn't hurt, right?
If you've done everything right you should now have an domestic and international unlocked Sprint galaxy s4. Enjoy.
I suppose you could now reflash the new modem back onto the phone, but I don't have firsthand knowledge whether this works or not- I've only read that others have said that it works. Remember, ONLY FLASH THE MODEM, the rest isn't necessary and will probably knox you all up
All I did was list these things- credit goes to all those who were linked in the above post. Thanks for all you do.

On stock 4.3 and higher you can go into settings and change your APN, so there's no reason to root and mess around with build.prop editor.

Every time i try this i cant get my wifi back up when i flash back to the nae modem. If i could get pass that then I'll definetly be do that.

can the modem be downgraded
mine came with mk2

leoiden said:
can the modem be downgraded
mine came with mk2
Click to expand...
Click to collapse
Yes, did like that on my L720 4.4.2 after unlocked with T-mobile i flashed 4.4.2 samsung s4 T-mobile odexed rom now the phone work like t-mobile s4 and full 4g signal, except the LTE data.

leoiden said:
can the modem be downgraded
mine came with mk2
Click to expand...
Click to collapse
tomy1986.nt said:
Yes, did like that on my L720 4.4.2 after unlocked with T-mobile i flashed 4.4.2 samsung s4 T-mobile odexed rom now the phone work like t-mobile s4 and full 4g signal, except the LTE data.
Click to expand...
Click to collapse
I have read that the modem itself cannot be downgraded. You can run older android versions and such on the newer modems, but the modem itself cannot be rolled back. I believe it has been like that since MJA.

You can downgrade modem, but can not downgrade bootloader (aboot)
Sent from my Phone using Tapatalk

I completed both the international & domestic unlock. I believe I was successful in each. I have a T-Mo sim card inserted but am not getting a mobile data connection. I do have 2 bars of service though. So I have gotten past the red X on the bars.
I am on 4.4.2 with the MDC modem. I did not do the build.prop stuff, instead opted to just access the APN's from the default menu.
A few things in my menu were different than the OP (probably because of 4.4) such as:
I dont have any roaming menu options
I dont have WCDMA.. just CDMA and LTE/CDMA. I currently have it set to LTE/CDMA
In my APN edit info there was not a place to put in MMS protocol: WAP 2.0
Also under About Device "my phone number" is wrong.
Am I missing something to get this t-mo working?

goblue30093 said:
I completed both the international & domestic unlock. I believe I was successful in each. I have a T-Mo sim card inserted but am not getting a mobile data connection. I do have 2 bars of service though. So I have gotten past the red X on the bars.
I am on 4.4.2 with the MDC modem. I did not do the build.prop stuff, instead opted to just access the APN's from the default menu.
A few things in my menu were different than the OP (probably because of 4.4) such as:
I dont have any roaming menu options
I dont have WCDMA.. just CDMA and LTE/CDMA. I currently have it set to LTE/CDMA
In my APN edit info there was not a place to put in MMS protocol: WAP 2.0
Also under About Device "my phone number" is wrong.
Am I missing something to get this t-mo working?
Click to expand...
Click to collapse
You didn't unlock it. If you were on NAE modem while unlocking then you failed miserably because you're not able to get into the most important part of the unlock...The service menu. If you did indeed downgrade the modem then you're going to need to follow the domestic unlock guide again. If it's showing CDMA/LTE you didn't do it right. It should show WCDMA only and WCDMA only isn't an option you can just select. It gets put there by the service menu.
Sent from my SPH-L720 using xda app-developers app

ecs87 said:
You didn't unlock it. If you were on NAE modem while unlocking then you failed miserably because you're not able to get into the most important part of the unlock...The service menu. If you did indeed downgrade the modem then you're going to need to follow the domestic unlock guide again. If it's showing CDMA/LTE you didn't do it right. It should show WCDMA only and WCDMA only isn't an option you can just select. It gets put there by the service menu.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I said I wasn't on NAE, I am on MDC. I did get into the service menu. I did everything in the process without issues. My service menu did NOT have a WCDMA only option. It had LTE/WCDMA and that's what i chose. I just went to the t-mobile store and they verified my APN settings were correct. I am unsure of what to do at this point other than just start all over and do it again.
Anyone else?

goblue30093 said:
I said I wasn't on NAE, I am on MDC. I did get into the service menu. I did everything in the process without issues. My service menu did NOT have a WCDMA only option. It had LTE/WCDMA and that's what i chose. I just went to the t-mobile store and they verified my APN settings were correct. I am unsure of what to do at this point other than just start all over and do it again.
Anyone else?
Click to expand...
Click to collapse
I apologize. Long work day. Follow the guide. When it comes to where it says select LTE, GSM, and WCDMA all, ONLY select WCDMA all. At no point should you see your Sprint phone number in about phone. Also you should see IMEISV in about phone as well if you've successfully unlocked it. It'll help if you posted the steps you've gone through. Otherwise were just shooting in the dark.
Sent from my SPH-L720 using xda app-developers app

tmobile rom
jaywaka2713 said:
I have read that the modem itself cannot be downgraded. You can run older android versions and such on the newer modems, but the modem itself cannot be rolled back. I believe it has been like that since MJA.
Click to expand...
Click to collapse
hi can you tell me where I can download 4.4.2 samsung s4 T-mobile odexed rom for l720. thanks.

ecs87 said:
I apologize. Long work day. Follow the guide. When it comes to where it says select LTE, GSM, and WCDMA all, ONLY select WCDMA all. At no point should you see your Sprint phone number in about phone. Also you should see IMEISV in about phone as well if you've successfully unlocked it. It'll help if you posted the steps you've gone through. Otherwise were just shooting in the dark.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Imeisv visible, definitely unlocked as i can make calls texts and use edge data on redpocket mobile (att mvno)
But in phone number I still see my sprint number and I can't get hspa (picking the wcdma all gives me red x no bars, picking gsm all gives me full bars and edge data)

ecs87 said:
I apologize. Long work day. Follow the guide. When it comes to where it says select LTE, GSM, and WCDMA all, ONLY select WCDMA all. At no point should you see your Sprint phone number in about phone. Also you should see IMEISV in about phone as well if you've successfully unlocked it. It'll help if you posted the steps you've gone through. Otherwise were just shooting in the dark.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
From the S5 thread and now here we meet again in a revisit in time. Since I know you own and understand the L720 more than I do, could you please explain to me if this will work on a 4.4.2 NAE rom? I picked up an L720 (bad esn) for $100 and its in pretty great shape. Now I'm looking to unlock it but my experience with Samsung devices are very mild. It came on CM10.2 (4.3.1) and ive slowly caught up with things. So i understand that sadly there is no such thing as downgrading from KK to JB, I was trying to get it stock on JB with no cigar. Elsewhere I found out that you must flash something identical or above. So im planning on flashing an NAE 4.4.2 stock rom (custom recovery flashable) I found in order to attempt to unlock it cause I can't seem to find a 4.4.1 as mentioned in the OP. I flashed the MDC modem and it stuck, so with little knowledge I am assuming that it will stick once I flash this new rom? Correct me if I am going down the wrong path...
EDIT: Great nobody ever mentioned anywhere that the software used on the international unlock is for 64bit only...

Crossvxm said:
From the S5 thread and now here we meet again in a revisit in time. Since I know you own and understand the L720 more than I do, could you please explain to me if this will work on a 4.4.2 NAE rom? I picked up an L720 (bad esn) for $100 and its in pretty great shape. Now I'm looking to unlock it but my experience with Samsung devices are very mild. It came on CM10.2 (4.3.1) and ive slowly caught up with things. So i understand that sadly there is no such thing as downgrading from KK to JB, I was trying to get it stock on JB with no cigar. Elsewhere I found out that you must flash something identical or above. So im planning on flashing an NAE 4.4.2 stock rom (custom recovery flashable) I found in order to attempt to unlock it cause I can't seem to find a 4.4.1 as mentioned in the OP. I flashed the MDC modem and it stuck, so with little knowledge I am assuming that it will stick once I flash this new rom? Correct me if I am going down the wrong path...
EDIT: Great nobody ever mentioned anywhere that the software used on the international unlock is for 64bit only...
Click to expand...
Click to collapse
The software works on 32 bit too. Actually you can even perform the international unlock WITHOUT the tool if you know how to use QPST or DFS. Anyway...
Flash full NAE. Flash MDC modem. International unlock. Domestic unlock. Win.
Sent from my SPH-L720 using XDA Free mobile app

ecs87 said:
The software works on 32 bit too. Actually you can even perform the international unlock WITHOUT the tool if you know how to use QPST or DFS. Anyway...
Flash full NAE. Flash MDC modem. International unlock. Domestic unlock. Win.
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
Must be an issue with my PC, nothing new...
And I know a thing or two about QPST. I still have it on my computer from a few days ago from when I was fixing a horribly corrupted IMEI on a G2 a friend of mine bought. I'm assuming I have to use a NAE stock tar with ODIN, because I tried a ROM of it and it lags and stays on black screens for seconds and WiFi doesn't work im sure because of the fact that the modem is older than the rom. Let's see if that works cause ive been trying to flash back to any stock ROM since I got this thing yesterday.

(Almost there...)
NEVER MIND. Got the international part working perfectly by using the Windows Vista partition on my PC. Now reading on, OP mentions that next the domestic unlock must be done, a link is provided there to another thread with domestic unlock instructions. Heres the question. The OP in the other thread mentions to hop onto 4.3 via odin. How can I get to 4.3 to domestic unlock if Odin doesnt let you downgrade?

Crossvxm said:
(Almost there...)
NEVER MIND. Got the international part working perfectly by using the Windows Vista partition on my PC. Now reading on, OP mentions that next the domestic unlock must be done, a link is provided there to another thread with domestic unlock instructions. Heres the question. The OP in the other thread mentions to hop onto 4.3 via odin. How can I get to 4.3 to domestic unlock if Odin doesnt let you downgrade?
Click to expand...
Click to collapse
Read the specifics. You cannot downgrade boot loaders but you CAN downgrade modems.
Unlock just requires MDC or MDL modem.

daniel4653 said:
Read the specifics. You cannot downgrade boot loaders but you CAN downgrade modems.
Unlock just requires MDC or MDL modem.
Click to expand...
Click to collapse
Yeah I remember that part but from what I was understanding, that's for the international. Domestic requires messing with some files and done. I already got the international part by tossing CM10.2 along with the MDC modem because stock Touch wiz would cause lag and reboots and non working wifi I'm assuming because of the mismatched combo. I DO know that obviously we need a TW rom in order to unlock domestic.
EDIT: I finally got the hint and got it to work. But I only get Edge instead of 3G. Does anyone know where I may be able to find that T-Mobile rom made for us? When I Google it I end up on the T-Mobile side.

Crossvxm said:
(Almost there...)
NEVER MIND. Got the international part working perfectly by using the Windows Vista partition on my PC. Now reading on, OP mentions that next the domestic unlock must be done, a link is provided there to another thread with domestic unlock instructions. Heres the question. The OP in the other thread mentions to hop onto 4.3 via odin. How can I get to 4.3 to domestic unlock if Odin doesnt let you downgrade?
Click to expand...
Click to collapse
I downgraded from latest bootloader on 4.4.2 or was it 4.4.4? Down to 4.3 which is the absolute best ROM version for service mode menu. It got me into service mode menu on first try by selecting menu back and input of 1. What I did was first install cf autoroot to root then cwm and used cwm to flash the 4.3 stock deodexed, I only used Odin for flashing modem. Odin gave me an error when flashing modem and phone got stuck in kies mode but i got it to get unstuck by just flashing cf auto root again to make the kies mode error thingy think odin flash has went well. Turns out MDC modem flashed despite odin error.
Anyways. While on 4.3 and MDC modem I noticed no WiFi but I had sound. I followed the international and domestic unlock instructions and WiFi was still broke when I got back to 4.4.2 but I had unlock and sim card working and got bars. I am on aosp 4.4.4 now and the nae modem I finally flashed works well with this ROM but soon I gotta go to touchwhiz 4.4.4. If I go to 4.4.4 touch whiz WiFi and all else will work fine just as they do on slim aosp . 4.4.2 touchwhiz is still not giving me wifi on NAE modem. Update NAE 4.4.2 stock deodexed rooted rom i got from xda android thread did the trick and all works well now. All is perfectly working after i flashed it in cwm.
For aosp lovers. aosp requires additional things to do so aosp dialer can make and receive calls fine. I can call but there are issues until I follow another guide on xda that resolves those issues on aosp ROMs using sprint s4.
http://forum.xda-developers.com/showthread.php?t=2539794
If you see system slow, no wifi, no audio and lockscreen being nearly impossible to unlock, its due to you being on a higher ROM than the modem was meant for.

[Q] Rooting N900A to Lollipop while using T-mobile.

Ugh, I am having so many issues with this at the moment. One of those things being that I am using T-mobile as my carrier. I'm stuck on 4.4 at the moment, and need to update it. But, will that relock the phone? How do I re-unlock it if that happens? I've already read that I can't flash the phone to T-mobile ROM, but are there any custom ROMs that you would recommend [I do actually use the S-pen, not sure if any have been updated to where that can still be used.] Lastly, is there any way to get mobile hotspot and tethering to work now that I am using tmobile?

Spikemare said:
Ugh, I am having so many issues with this at the moment. One of those things being that I am using T-mobile as my carrier. I'm stuck on 4.4 at the moment, and need to update it. But, will that relock the phone? How do I re-unlock it if that happens? I've already read that I can't flash the phone to T-mobile ROM, but are there any custom ROMs that you would recommend [I do actually use the S-pen, not sure if any have been updated to where that can still be used.] Lastly, is there any way to get mobile hotspot and tethering to work now that I am using tmobile?
Click to expand...
Click to collapse
I never tried this Rom.
T-Mobile Alliance Lollipop Rom on ATT Note 3
http://forum.xda-developers.com/note-3-att/general/t-mobile-alliance-rom-att-note-3-t3065127 I don't think you would have to worry about any of this as you are using T-Mobile " After the phone came up, I went to settings..general..applications...running .... and found every Tmobile app and cleared cache and disabled them. The real important one here is the Visual Voicemail. Otherwise it will keep on trying to contact Tmobile and then you will get text messages saying there is an error. Thanks @sapps
Wifi Calling is throwing a sim card error (as you would expect). Only problem is it is shown in status bar and lockscreen. I'm sure there is a way to hide it or disable it. I just haven't had a chance to figure it out."

Rooted i747 said:
I never tried this Rom.
T-Mobile Alliance Lollipop Rom on ATT Note 3
http://forum.xda-developers.com/note-3-att/general/t-mobile-alliance-rom-att-note-3-t3065127 I don't think you would have to worry about any of this as you are using T-Mobile " After the phone came up, I went to settings..general..applications...running .... and found every Tmobile app and cleared cache and disabled them. The real important one here is the Visual Voicemail. Otherwise it will keep on trying to contact Tmobile and then you will get text messages saying there is an error. Thanks @sapps
Wifi Calling is throwing a sim card error (as you would expect). Only problem is it is shown in status bar and lockscreen. I'm sure there is a way to hide it or disable it. I just haven't had a chance to figure it out."
Click to expand...
Click to collapse
But it's the N900A, so it's the AT&T version. Won't that brick the phone if I put the tmobile ROM on it? That's what I've read in other threads on here anyway. [Honestly I shouldn't write when I'm tired, or I would have explained this better.]. Basically, I bought an unlocked AT&T phone. A Note 3 to be exact. It's stuck on 4.4 but can upgrade to lolipop. Nothing I try will let me upgrade the normal way. I'm not sure how to upgrade it without relocking the SIM card somehow. Or is the simcard already semi-locked and that's why it's giving me the error? I also can't even find a AT&T specific rooting guide for this phone. I saw every other carrier except AT&T, does that even make a difference? And are there any ROMs that can return S-pen programs after I install them, or should I just stop at rooting if I want that? If so, I just really want to upgrade to lollipop and root the phone. I would like my mobile hotspot and wifi calling to work, but I suppose I can make do with hangouts.

Spikemare said:
But it's the N900A, so it's the AT&T version. Won't that brick the phone if I put the tmobile ROM on it? That's what I've read in other threads on here anyway. [Honestly I shouldn't write when I'm tired, or I would have explained this better.]. Basically, I bought an unlocked AT&T phone. A Note 3 to be exact. It's stuck on 4.4 but can upgrade to lolipop. Nothing I try will let me upgrade the normal way. I'm not sure how to upgrade it without relocking the SIM card somehow. Or is the simcard already semi-locked and that's why it's giving me the error? I also can't even find a AT&T specific rooting guide for this phone. I saw every other carrier except AT&T, does that even make a difference? And are there any ROMs that can return S-pen programs after I install them, or should I just stop at rooting if I want that? If so, I just really want to upgrade to lollipop and root the phone. I would like my mobile hotspot and wifi calling to work, but I suppose I can make do with hangouts.
Click to expand...
Click to collapse
It won't brick you phone. It's a T-Mobile Rom that's been ported for AT&T Note 3. After you flash the Rom, you have to Odin the N900A_OC1_ALL_Other_Stock_Partitions.tar.md5 using Odin's PDA slot. As far as rooting what you have now, just use Towel root https://towelroot.com/ (install on phone like any other app) and click "make it rain". Install Supersu, busybox and Safestrap. OR use Kingo Root http://www.kingoapp.com/ (Kingo Root will install supersu for you). The reason it won't upgrade to Lollipop is you have a T-Mobile sim card in it. It needs a AT&T sim card (I have AT&T and can't upgrade mine unless the sim card is in the phone). If you just want a rooted Lollipop Rom, but it's AT&T http://forum.xda-developers.com/showpost.php?p=59666958&postcount=2 You know since you're on T-Mobile you have to go into settings>more networks>mobile networks>access point names and change it to T-Mobile's APN. I would just root it and put the T-Mobile Alliance Lollipop Rom on ATT Note 3 on it. I gave it a try yesterday and it does have T-Mobile apps on it, just not for me. Just remember to change the APN to T-Mobile's ( just write down the one you using now).

Samsung Galaxy S6 (SM-G920T1)

I got my phone at Rent-A-Center, and got T-Mobile service on it. The phone worked fine for a while, until all of sudden I got a message:
Security Error
The phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. Please note that repair/return for this issue may have additional cost.
Click to expand...
Click to collapse
So, I followed some instructions online, hooked my phone to the computer, and upgraded the firmware through Kies, which gave it a metroPCS ROM. I had been suspecting that someone flashed the phone before I got it from Rent-A-Center, but this really sealed it. So, I called T-Mobile, and T-Mobile tried to tell me that the phone was now locked to metroPCS and I had to call them. metroPCS said that they would not help. So, I had to do some work on it myself. I tried to find a T-Mobile compatible ROM, and before I did that I wiped the phone completely. Nothing will flash to it now, and it's in a bootloop. None of the flashes succeeded except that I was able to get a custom recovery on it. I can access TWRP and Download mode, but I can't successfully flash anything. Can I get some help?
Edit: I meant to append "Boot Looping" to the end of the title when I finished the posts body. I apologize.
Edit 2: I was finally able to get it out of the boot-loop by flashing a new bootloader, and flashing the stock ROM. However, it's back on metroPCS and still has that same message. How do I fix this?

IO.0 said:
I got my phone at Rent-A-Center, and got T-Mobile service on it. The phone worked fine for a while, until all of sudden I got a message:
So, I followed some instructions online, hooked my phone to the computer, and upgraded the firmware through Kies, which gave it a metroPCS ROM. I had been suspecting that someone flashed the phone before I got it from Rent-A-Center, but this really sealed it. So, I called T-Mobile, and T-Mobile tried to tell me that the phone was now locked to metroPCS and I had to call them. metroPCS said that they would not help. So, I had to do some work on it myself. I tried to find a T-Mobile compatible ROM, and before I did that I wiped the phone completely. Nothing will flash to it now, and it's in a bootloop. None of the flashes succeeded except that I was able to get a custom recovery on it. I can access TWRP and Download mode, but I can't successfully flash anything. Can I get some help?
Edit: I meant to append "Boot Looping" to the end of the title when I finished the posts body. I apologize.
Edit 2: I was finally able to get it out of the boot-loop by flashing a new bootloader, and flashing the stock ROM. However, it's back on metroPCS and still has that same message. How do I fix this?
Click to expand...
Click to collapse
Download Samsung Kies and try to do a firmware install by providing your model and serial number.

IO.0 said:
I got my phone at Rent-A-Center, and got T-Mobile service on it. The phone worked fine for a while, until all of sudden I got a message:
So, I followed some instructions online, hooked my phone to the computer, and upgraded the firmware through Kies, which gave it a metroPCS ROM. I had been suspecting that someone flashed the phone before I got it from Rent-A-Center, but this really sealed it. So, I called T-Mobile, and T-Mobile tried to tell me that the phone was now locked to metroPCS and I had to call them. metroPCS said that they would not help. So, I had to do some work on it myself. I tried to find a T-Mobile compatible ROM, and before I did that I wiped the phone completely. Nothing will flash to it now, and it's in a bootloop. None of the flashes succeeded except that I was able to get a custom recovery on it. I can access TWRP and Download mode, but I can't successfully flash anything. Can I get some help?
Edit: I meant to append "Boot Looping" to the end of the title when I finished the posts body. I apologize.
Edit 2: I was finally able to get it out of the boot-loop by flashing a new bootloader, and flashing the stock ROM. However, it's back on metroPCS and still has that same message. How do I fix this?
Click to expand...
Click to collapse
Flash it with the latest Metro PCS firmware, then you will have to get a unlock code from unlock base or your preferred unlocking company. After that it will work on T-Mobile and every other GSM carrier BUT you must keep the metro PCS bootloader and modem. I use a 920T with 920T1 bootloader and modem on the att network. I am running the tmobile twisted six rom + kernel with great success.

Quickvic30 said:
Flash it with the latest Metro PCS firmware, then you will have to get a unlock code from unlock base or your preferred unlocking company. After that it will work on T-Mobile and every other GSM carrier BUT you must keep the metro PCS bootloader and modem. I use a 920T with 920T1 bootloader and modem on the att network. I am running the tmobile twisted six rom + kernel with great success.
Click to expand...
Click to collapse
Flashing always fails for me.

Gthomas1216 said:
Flashing always fails for me.
Click to expand...
Click to collapse
Well metro uses that unlock app also now so I'm not sure that method even works anymore these days. Also you have to make sure the bootloader number is the same or above the metro firmware your trying to flash. Bootloader number is the fifth from the last number.

Quickvic30 said:
Well metro uses that unlock app also now so I'm not sure that method even works anymore these days. Also you have to make sure the bootloader number is the same or above the metro firmware your trying to flash. Bootloader number is the fifth from the last number.
Click to expand...
Click to collapse
I downloaded one from a tutorial and it failed on Odin then I downloaded 2 more metropcs firmwares from sammobile and they failed. I'll try to do what you said, find one similar to my bootloader.
---------- Post added at 09:24 AM ---------- Previous post was at 09:22 AM ----------
Quickvic30 said:
Well metro uses that unlock app also now so I'm not sure that method even works anymore these days. Also you have to make sure the bootloader number is the same or above the metro firmware your trying to flash. Bootloader number is the fifth from the last number.
Click to expand...
Click to collapse
This method seemed to have took place in 2015 and I even saw posts of it working in late 2016. Do you by any chance know when metropcs started using an device unlock app?

Gthomas1216 said:
I downloaded one from a tutorial and it failed on Odin then I downloaded 2 more metropcs firmwares from sammobile and they failed. I'll try to do what you said, find one similar to my bootloader.
---------- Post added at 09:24 AM ---------- Previous post was at 09:22 AM ----------
This method seemed to have took place in 2015 and I even saw posts of it working in late 2016. Do you by any chance know when metropcs started using an device unlock app?
Click to expand...
Click to collapse
Pretty sure they started using it when marshmallow was released.

LOST IMEI - Please Help

I did something really stupid and ended up with a bad flash on my NOTE 9 - the result is that I no onger have an IMEI number on my phone - no data at all - no mobile data.
I know what my IMEI Number is from my GOOGLE account - but I don't know how I can fix my phone to get the IMEI number back into the phone.
Any suggestions are grealy appreciated.
I did a google search which had a few suggested ways using the dialer - but when I attempt to do that, nothing happens - I don't get any result from the dialer codes online.
Your help is greatly appreciated

Find the latest software for your phone and install it with Odin. Or emergency software recovery with Smart Switch.

Geekser said:
I did something really stupid and ended up with a bad flash on my NOTE 9 - the result is that I no onger have an IMEI number on my phone - no data at all - no mobile data.
I know what my IMEI Number is from my GOOGLE account - but I don't know how I can fix my phone to get the IMEI number back into the phone.
Any suggestions are grealy appreciated.
I did a google search which had a few suggested ways using the dialer - but when I attempt to do that, nothing happens - I don't get any result from the dialer codes online.
Your help is greatly appreciated
Click to expand...
Click to collapse
For the benefit of others (to hopefully not make a similar misstep) what did you do to create this issue? Flash a ROM from another region, carrier, etc.? I understand if you prefer not to share... thanks for the consideration.

d.cortez said:
For the benefit of others (to hopefully not make a similar misstep) what did you do to create this issue? Flash a ROM from another region, carrier, etc.? I understand if you prefer not to share... thanks for the consideration.
Click to expand...
Click to collapse
There was a rom in the Custom Roms section that looked like it was meant for our phones - I think it was the WETA ROM - I didn't read the oP very carefully - totally my fault - it was not intended for the N960F - (but that was not really that clear when I first read the OP - or at least I lverlooked it. i will be much more careful next time. - it damn near bricked my phone.
I tried flashing full firmware in ODIN to fix it -no good - the flashes failed. - I tried restoring Nandroids - they restored fine but IMEI was still missing.
The fix I found eventually was to flash the DEV BASE Firmware that was recently added to the Roms section - flashing that fixed my issues and I am now back and working properly. I tried more fixes than I can count - and all of them failed - I was close to thinking I might have to buy a new phone. Dr Ketan suggested I flash the Dev Base sortware and he was absolultely correct. It worked.

michelino159 said:
Find the latest software for your phone and install it with Odin. Or emergency software recovery with Smart Switch.
Click to expand...
Click to collapse
Neither Option worked for me - ODIN Flashes got stuck halfway thru the flash - and Smart Switch just didn't work

Geekser said:
There was a rom in the Custom Roms section that looked like it was meant for our phones - I think it was the WETA ROM - I didn't read the oP very carefully - totally my fault - it was not intended for the N960F - (but that was not really that clear when I first read the OP - or at least I lverlooked it. i will be much more careful next time. - it damn near bricked my phone.
I tried flashing full firmware in ODIN to fix it -no good - the flashes failed. - I tried restoring Nandroids - they restored fine but IMEI was still missing.
The fix I found eventually was to flash the DEV BASE Firmware that was recently added to the Roms section - flashing that fixed my issues and I am now back and working properly. I tried more fixes than I can count - and all of them failed - I was close to thinking I might have to buy a new phone. Dr Ketan suggested I flash the Dev Base sortware and he was absolultely correct. It worked.
Click to expand...
Click to collapse
Glad to know you're good to go... i just received my Dual Sim Note 9 today and got it setup to work with ATT using an ATT CSC and used it for 20 minutes. Popped my T-Mobile SIM in the phone and blam! got an invalid SIM card message followed by a SIM network PIN blocked. Enter SIM network PUK message. Got PUK unlock codes from ATT and T-Mobile and they did not work. off to do more research....

d.cortez said:
Glad to know you're good to go... i just received my Dual Sim Note 9 today and got it setup to work with ATT using an ATT CSC and used it for 20 minutes. Popped my T-Mobile SIM in the phone and blam! got an invalid SIM card message followed by a SIM network PIN blocked. Enter SIM network PUK message. Got PUK unlock codes from ATT and T-Mobile and they did not work. off to do more research....
Click to expand...
Click to collapse
Is that an international varient? Would love to hear if you get ATT CSC working. I am on ATT too in the US but right now using BTU CSC -

Geekser said:
Is that an international varient? Would love to hear if you get ATT CSC working. I am on ATT too in the US but right now using BTU CSC -
Click to expand...
Click to collapse
I was able to get around the PUK code through a master reset. Go figure.
There's a thread in the forums that talks about copying your carrier's CSC to your phone and then making the necessary changes to four files in the /efs/imei folder. It's not hard, but you got to be very careful. Instructions are in the thread mentioned above. I have LTE/HD Voice access during phone calls, but I have not been able to get Wi-Fi calling to work because the IMS service FC's when launching.
I suspect it may have something to do with using a dual-sim phone. I have both my AT&T and T-Mobile SIM in the phone, and I'm loving using one phone for business and personal calls. I also have Google Voice and I can use that for Wifi calling if necessary. As a final note, to get access to AT&T enhanced services on a non AT&T phone, you have to use an IMEI number from an AT&T phone that supports its enhanced services. In my case I've been using the IMEI number from my three-year-old Samsung S6 active. I called support told rep that I was using my S6 active while waiting on a new phone and they associated the IMEI number with my cell number.

d.cortez said:
I was able to get around the PUK code through a master reset. Go figure.
There's a thread in the forums that talks about copying your carrier's CSC to your phone and then making the necessary changes to four files in the /efs/imei folder. It's not hard, but you got to be very careful. Instructions are in the thread mentioned above. I have LTE/HD Voice access during phone calls, but I have not been able to get Wi-Fi calling to work because the IMS service FC's when launching.
I suspect it may have something to do with using a dual-sim phone. I have both my AT&T and T-Mobile SIM in the phone, and I'm loving using one phone for business and personal calls. I also have Google Voice and I can use that for Wifi calling if necessary. As a final note, to get access to AT&T enhanced services on a non AT&T phone, you have to use an IMEI number from an AT&T phone that supports its enhanced services. In my case I've been using the IMEI number from my three-year-old Samsung S6 active. I called support told rep that I was using my S6 active while waiting on a new phone and they associated the IMEI number with my cell number.
Click to expand...
Click to collapse
I have an IMEI number from a Note 9 that was an aTT Phone - I had purchased the snapdragon varient at Best buy and then returned it when I got the N960F . I copied the IMEI number before I turned it in - I suppose I could use that. Can you offer a link to the thread you are referring to?
thanks for the tip my friend.

Geekser said:
There was a rom in the Custom Roms section that looked like it was meant for our phones - I think it was the WETA ROM - I didn't read the oP very carefully - totally my fault - it was not intended for the N960F - (but that was not really that clear when I first read the OP - or at least I lverlooked it. i will be much more careful next time. - it damn near bricked my phone.
I tried flashing full firmware in ODIN to fix it -no good - the flashes failed. - I tried restoring Nandroids - they restored fine but IMEI was still missing.
The fix I found eventually was to flash the DEV BASE Firmware that was recently added to the Roms section - flashing that fixed my issues and I am now back and working properly. I tried more fixes than I can count - and all of them failed - I was close to thinking I might have to buy a new phone. Dr Ketan suggested I flash the Dev Base sortware and he was absolultely correct. It worked.
Click to expand...
Click to collapse
Could you please provide a link to this dev base firmware? Did you need to have twrp and root before installing the dev base?

brusyev2 said:
Could you please provide a link to this dev base firmware? Did you need to have twrp and root before installing the dev base?
Click to expand...
Click to collapse
dev base is Alexander rom in the development section.

brusyev2 said:
Could you please provide a link to this dev base firmware? Did you need to have twrp and root before installing the dev base?
Click to expand...
Click to collapse
If I am not mistaken, it was something like this https://forum.xda-developers.com/galaxy-note-9/development/test-s2arh6-devbase-v5-9-encryption-t3847061
you do need to have TWRP installed in order to flash
hope that helps

still need help
brusyev2 said:
Could you please provide a link to this dev base firmware? Did you need to have twrp and root before installing the dev base?
Click to expand...
Click to collapse
Do you still need help here is the link to the firmware that I used to flash stock ROM make sure you read what and how it is to be done the first time i flashed it i got stuck in bootloop and then i read it again and got it right now my phone works and is fine hope you have your phone working https://forum.xda-developers.com/galaxy-note-9/how-to/u1-note-9-official-firmware-guide-to-t3927478