Related
will the existing nexus one kernels/roms work with the att nexus one or is the difference in radio band a show stopper? Just ordered the att nexus one, and currently have a rooted Droid - not sure i could go back to an unrooted & unmod'ed phone
I'm assuming that by ATT you mean unlocked. Regardless, the Nexus One does not have the necessary hardware to use AT&T's 3G. Aside from this, they are compatible. It is the same phone.
No he means the verison thats comming out to be compatible with AT&T's 3G network
It doesn't seem as though Google released a different set of kernel sources for the AT&T Nexus One, so I would assume that all current ROMs are compatible with the new hardware revision.
I just ordered one, by the way.
will the existing nexus one kernals
Click to expand...
Click to collapse
In for one I want to flash the HTC Desire firmware on there ASAP so I have full Exchange support!
kozm0naut said:
I'm assuming that by ATT you mean unlocked. Regardless, the Nexus One does not have the necessary hardware to use AT&T's 3G. Aside from this, they are compatible. It is the same phone.
Click to expand...
Click to collapse
I mean the unlocked AT&T 3G compatible Nexus One that was released today and should be on my doorstep via FedEx tomorrow.
coolbho3000 said:
..(spelin' corexion)
Click to expand...
Click to collapse
sorry... KERNEL ....
my powers been out for 5 days with no end in sight, baby awake all night every night since... no internet except from my rooted droid and my tethered tilt...
... hmm "To prevent spam to the forums, new users must wait five minutes between posts. All new user accounts will be verified by moderators before this restriction is removed." .. I joined in 2008 - how long is the verification process?
I freaking love popcorn.
Has anyone tried the latest cyanogen or baked goods on their ATT N1? I get mine tomorrow and want to make sure it is safe.
wumpscut223 said:
Has anyone tried the latest cyanogen or baked goods on their ATT N1? I get mine tomorrow and want to make sure it is safe.
Click to expand...
Click to collapse
Backup your phone, and flash 5.0.4.1. If it works, great! If not? Restore your backup.
Only one way to find out! I get my ATT n1 tomorrow as well. It's going to make my current n1 sad.
kozm0naut said:
I'm assuming that by ATT you mean unlocked. Regardless, the Nexus One does not have the necessary hardware to use AT&T's 3G. Aside from this, they are compatible. It is the same phone.
Click to expand...
Click to collapse
Yes, it does now. It's a different model.
So the question remains - are the roms/procedures the same?
i got my att n1 today and the first thing i did was flashed cm 5.0.5 test 2 on it and all i can say its behaving just like the t-mobile one.
im loving the ability to use rogers 3g network since i hate using wifi.
Hi,
I have just updated my Nexus One to Stock FRF91 in the last few days & I keep dropping signal on call. Has anybody else experienced these problems.
I bought my Nexus one when it was first released from Google's webstore.
I have checked the radio version on my phone & it is a U version. I heard that there is two versions of radio i.e. H & U & I was wondering what version was for the UK.
I would appreciate some help.
I am on O2 UK.
Thanks
JAW$
I still do not know how to get FastBoot_SU working on my XT907 so these things are just experimental.
Verizon XT907 Razr M US with US T-Mobile using NON-HLOS.bin from AUSSIE ICS
I know Edge and Voice is working with my Sim.
No idea how to get FastBoot_SU working so i did this a bit different.
You will need:
VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml (http://forum.xda-developers.com/showthread.php?t=2017200)
RSDLite6.1.4_FLASH
MotorolaDeviceManager_2.3.4 DRIVERS
NON-HLOS.bin from AUSSIE Razr M it is 102.400KB compared to the US 49.xxxKB (http://dl.dropbox.com/u/8648738/NON-HLOS.bin)
WinRar or any Zip Program
1. Navigate inside VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml using winrar or winzip and find the original NON-HLOS.Bin over write this with the Aussie Radio 100kb one. Make sure its packed normal again.
2. Use RSDLite, make sure Phone is in Debug mode, flash the new VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml with the modified Radio.
3. Let the update do its thing, once done insert SIM and enjoy GSM reception.
4. Find a way to gain root access ahhahahaha bc this should wiped ur root access.
There is a way to use FastBoot_SU somehow but it does not work me ...
This is the same modification done to ICS to get it to work with US carriers, except you are on JB or in this case i used JB to flash the entire device.
Some one feel free to clean up these steps or improve this for easy use of tutorial ? You are welcome to edit LOL
followed the steps. but it seems the radio is problematic, because att signal is vey vey weak. I couldnot place call.the same micro sim had 4 bar at my hd2 win phone.
any fix?
Sent from my XT907 using Tapatalk 2
Just tried flashing following your instructions and got stuck.
RSD Lite v5.6 Multi-Flash reports:
Failed flashing process. 16/19 flash "cdrom" -> Phone returned FAIL.; phone connected
Please help!!! Phone now stuck in Fastboot Flash Mode...
Thank you
I did not use 5.6
Also make sure ur battery is above 50% I did have issues flashing when my phone was at about 30-40 ish %
It will show up as low battery.
Get the Stock Verizon JB reflash it with 6.X and up.
Then use a clean version of JB with a modded PJcon Aussie Radio.
And reflash it from there.
To get out of there just Reboot by holding all buttons Power and Volume until reboot.
Thank you!
It only works with version 6 and above.
All is good now.
BTW I just traveled through the documented refarmed areas in Chicago and Cleveland and still no 3g.
yeah same here.
We still figuring out how to get 3G or 4G
Just to add some "fuel to the fire"...a year or so ago I got bored with my Defy and got an Atrix 4G online from the US (I live in Australia). It was AT&T branded and locked so had to purchase an unlock code. When I got it going on Telstra, the reception was just never that good. People always complained they couldn't hear me and I had similar experiences with hearing them. I even gave it to my bro on the other side of the country and he had the same issues.
I suppose what I'm putting forward is that even if it is 2100mhz band or 850mhz band which the Aussie radio does (I don't know what AT&T/T-Mobile run on), it's possibly more than that? I recall reading a VERY interesting article about how much work carriers do to get phones to work on their selected band - no disrespect to any Devs intended, this is just my thoughts as this may be a ghost we're chasing?
Or is the Electrify M XT905 going to work any better?
Works perfectly fine in Germany though Germany uses Stock Rom for XT907
I am getting Super strong signal everywhere better than my iPhone 4, I am using Aussie radio.
I even get better signal than the AT&T users. So it maybe the area, AT&T been getting worse bc they share some towers with T-mobile now.
By that the same tower rent space T-mobile is allowed to put up their Antenna gear, which sometimes decreases signal strength of AT&T.
Which happened alot in my area, alot of AT&T users loosing more signal... and running a modded phone is probably isn't helping the matter.
But T-Mobile seems to have few more frequencies after the refarm ? Maybe that's why ?
The XT907 Definitively is able to get H+ on GSM with Stock Rom in Europe.
H+ we managed to get it to 2.xMB but her normal area we only get 1.5-1.9MB ish
She also picks up E and 3G here and there.
This is on O2 Germany (DE) in Munich Testing to Frankfurt.
Using Stock Verizon Firmware un-modified stock radio.
I will test Aussie Radio next week in Germany see what happens.
But right now She is enjoying H+ with GSM on a XT907.
Hi guys,
I've read the threads in Q/A and this one about different sim cards in RAZR M, and I must say I'm pretty sad because it doesn't work.
I like this phone very much. It's the best phone I've ever seen. But I won't buy it because I don't have money to pay for expensive plans to Verizon (nor I will be in the US for 2 years which is the minimum contract time), and it doesn't work on T mobile which I would like to use. I guess I will have to stay on my Defy and wait for some new unlocked version of Motorola (never gonna happen imo).
Or should I buy it and try this method so I can use it partially with T mobile? Please advise.
Sent from my MB525 using xda app-developers app
I am using it with this method with T-Mobile.
Though when i am in Germany I have to take the mod out to get onto 3G in Germany.
With US-T-mobile we only managed to get Edge Connectivity so far.
I like it because i dont use much data and edge is enough for geting GPS to work smooth and surfing is slooow.
Else all is well =)
Thanks for the info~~~!!
It'd be really cool if the dropbox link worked. Unless im doing something wrong. Unless i can pull it out of another stock/rom file
Great info. Is the dropbox link down for good? I cant seem to find any mirrors :-/
This method has been made obsolete by the discovery of a much simpler procedure that edits a single bit in the radio NVM that enables full service on US carriers.
I wrote up the updated method in the Q&A section.
http://forum.xda-developers.com/showthread.php?t=2166542
Can someone please reupload AUSSIE RADIO as Radiocomm method is not working for me!
Proda said:
Hi guys,
I've read the threads in Q/A and this one about different sim cards in RAZR M, and I must say I'm pretty sad because it doesn't work.
I like this phone very much. It's the best phone I've ever seen. But I won't buy it because I don't have money to pay for expensive plans to Verizon (nor I will be in the US for 2 years which is the minimum contract time), and it doesn't work on T mobile which I would like to use. I guess I will have to stay on my Defy and wait for some new unlocked version of Motorola (never gonna happen imo).
Or should I buy it and try this method so I can use it partially with T mobile? Please advise.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
May I suggest buying the RAZR i
Germanese said:
I still do not know how to get FastBoot_SU working on my XT907 so these things are just experimental.
Verizon XT907 Razr M US with US T-Mobile using NON-HLOS.bin from AUSSIE ICS
I know Edge and Voice is working with my Sim.
No idea how to get FastBoot_SU working so i did this a bit different.
You will need:
VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml (http://forum.xda-developers.com/showthread.php?t=2017200)
RSDLite6.1.4_FLASH
MotorolaDeviceManager_2.3.4 DRIVERS
NON-HLOS.bin from AUSSIE Razr M it is 102.400KB compared to the US 49.xxxKB (http://dl.dropbox.com/u/8648738/NON-HLOS.bin)
WinRar or any Zip Program
1. Navigate inside VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml using winrar or winzip and find the original NON-HLOS.Bin over write this with the Aussie Radio 100kb one. Make sure its packed normal again.
2. Use RSDLite, make sure Phone is in Debug mode, flash the new VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml with the modified Radio.
3. Let the update do its thing, once done insert SIM and enjoy GSM reception.
4. Find a way to gain root access ahhahahaha bc this should wiped ur root access.
There is a way to use FastBoot_SU somehow but it does not work me ...
This is the same modification done to ICS to get it to work with US carriers, except you are on JB or in this case i used JB to flash the entire device.
Some one feel free to clean up these steps or improve this for easy use of tutorial ? You are welcome to edit LOL
Click to expand...
Click to collapse
is there a way to flash it in a RAZR-M with JB 4.1.2 ?
toroloco73 said:
is there a way to flash it in a RAZR-M with JB 4.1.2 ?
Click to expand...
Click to collapse
Yes it is.
Though I am not sure if it is possible on the 98.18.78.
Earlier ones will work.
Germanese said:
Yes it is.
Though I am not sure if it is possible on the 98.18.78.
Earlier ones will work.
Click to expand...
Click to collapse
now i'm on xt907_stock_deodex_98.16.3
i can't find NON-HLOS.bin from AUSSIE Razr M file
Hello everyone
I recently bought an HTC One (Carrier: Orange CH) in Switzerland which, technically, is capable of using LTE.
Even before my number was activated (took them like 2 weeks) I flashed the custom ROM Android Revolution HD 10.1 (kernel seems to be 3.4.10-gd6f147e), choosing the International version during the Aroma Installer process.
So, here's the problem: I'm unable to connect to LTE in any way. I tried dialing *#*#4636#*#* and selecting "LTE only"-mode (which left me without signal), rebooting of course, flashing a different kernel (reflashing Android Rev later) and contacting customer service, which - as expected - brought forward no results other than "try waiting a few days".
My question: Is it possible that a custom ROM/kernel can either a) modify the radio or b) discard certain frequencies on software basis (since the US have different frequencies for LTE this seemed quite likely to me, however, I have no problems with HSPA+ and UMTS).
Sent from my HTC One using xda app-developers app
Surreptor said:
Hello everyone
I recently bought an HTC One (Carrier: Orange CH) in Switzerland which, technically, is capable of using LTE.
Even before my number was activated (took them like 2 weeks) I flashed the custom ROM Android Revolution HD 10.1 (kernel seems to be 3.4.10-gd6f147e), choosing the International version during the Aroma Installer process.
So, here's the problem: I'm unable to connect to LTE in any way. I tried dialing *#*#4636#*#* and selecting "LTE only"-mode (which left me without signal), rebooting of course, flashing a different kernel (reflashing Android Rev later) and contacting customer service, which - as expected - brought forward no results other than "try waiting a few days".
My question: Is it possible that a custom ROM/kernel can either a) modify the radio or b) discard certain frequencies on software basis (since the US have different frequencies for LTE this seemed quite likely to me, however, I have no problems with HSPA+ and UMTS).
Unfortunately my
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
AFAIK the ROMs currently do not flash new radios. You might find better and more help on the ARHD forums though I searched on Google http://en.wikipedia.org/wiki/List_of_LTE_networks but I couldn't find Orange Switzerland.
However, in Malaysia, many have been complaining of not being able to receive LTE and the solution was to ask the telco for a new Simcard since only the newer sims supported LTE. Might wanna try that
Hey thanks for your reply!
I'm kinda relieved that it probably wasn't my fault. If nobody tells me otherwise (can't hurt to hear a few more opinions though) I'll ask Orange to test my SIM on another device. It *should* work since I bought it together with my phone, but there were some issues with activation and other stuff, so maybe it's their fault after all.
Greetings to Malaysia and a sunny weekend!
[Surreptor]
Sent from my HTC One using xda app-developers app
I just flashed this build to my N6 a couple a days ago and right off I noticed that while in my house I wasn't getting a good lte signal anymore. Now before I updated to this build I had good lte in my house almost full bars even in my basement I had at least 2 or 3 bars. Well needless to say I wasn't happy with that so I flashed back to what I was running before which was MRA58N and sometimes R . Well when I flashed back to these builds I noticed again that something wasn't right my signal seemed to have been broke! So I started flashing just radios to see if that would help but to no avail.. I even called T-Mobile and they said nothing was going on in my area and I should have good signal ,but in that same sentence he brought up the cellspot tower that they want everyone in low signal areas to use. Well to make a long story short I live in the city and before I flashed this latest T-Mobile build I had great service even in my house. The messed up thing is I can't fix my N6 now know matter what build I use my signal is no good in my house anymore. It's almost like they have put a patch of some sort to my phone and it modded my phone to not had goog lte service behind walls. My phone now jumps from 3g to h to the ! Mark even when it's in some spot! My battery sucks now because of the constant change. I'm getting a new n6 Monday and I hope it doesn't have this X build on it because I'm going to not flash and see if my signal stays the way it used to which was a good signal. If it has good signal I'm (and this is just my opinion) think there /T-Mobile is just trying to push this cellspot tower on as many as they can and help it along is turning down Rf in our phones so they don't work well indoors.. Just my opinion!
I want the MRA58X radio to see if I have the same problem. I have the MRA58M with the 27R radio and it runs good. I wanna see if the 30R radio gives me more band 12 because I live in a band 12 area but it switches back to band 4 with the quickness. Anybody have the 30R radio in zip forms? It'll be greatly appreciated.
scoonie said:
I want the MRA58X radio to see if I have the same problem. I have the MRA58M with the 27R radio and it runs good. I wanna see if the 30R radio gives me more band 12 because I live in a band 12 area but it switches back to band 4 with the quickness. Anybody have the 30R radio in zip forms? It'll be greatly appreciated.
Click to expand...
Click to collapse
Oh the MRA58X does have band 12. Im not flashing this X build when my new N 6 gets here! I'll stay far away from it! I'll stick with Google's official builds! MRA58N worked great for me on T-Mobile and WiFi calling and I had band 12 as well. When I flashed this X build everything went haywire... IMO!
Im on MRA58X just wanted to know why all these different numbers ? And why is the x bad?
samomamo said:
Im on MRA58X just wanted to know why all these different numbers ? And why is the x bad?
Click to expand...
Click to collapse
MRA58X screwed up my data/ signal it was jumping all over the place for me. It would literally go from band 12 to 2 then 4 the radio never had a chance to settle and was causing major battery drain. The messed up thing is for some reason I couldn't even revert back to other builds cause the radio stayed messed up no matter what build I was on or rom.. I truly think MRA58X messed my n6 up and T-Mobile thinks it may have as well that's why there sending me a new n6 by Monday..?
Oh I forgot this radio jumping all over the place happens anywhere I go even when Im not even moving..?
Flashing different radios don't help either... I'm truly think this build/X does something weird with the way the phone tracks signals and for me its a major problem
beachbum40 said:
MRA58X screwed up my data/ signal it was jumping all over the place for me. It would literally go from band 12 to 2 then 4 the radio never had a chance to settle and was causing mager battery drain. The messed up thing is for some reason I couldn't even revert back to other builds cause the radio stayed messed up no matter what build I was on or rom.. I truly think MRA58X messed my n6 up and T-Mobile thinks it may have as well that's why there sending me a new n6 by Monday..?
Click to expand...
Click to collapse
Interesting, i have moto x pure , nexus 5x amd yesterday got the nexus 6 from the Amazon deal, so before using the nexuses i was with the moto x and had no problems with it watching youtube videos or anything. Then 3 days ago i got the nexus 5x and put my tmobile sim in it and started using that and was noticing that the videos were stopping like i was feeling something is not right , then yesterday got the Nexus 6 and put the sim in this now im having the same issues i was on lollipop and was not offering me the marshmallow update, so i unlocked the bootloader and when the phone started it gave the 6.0 update . so now im on the MRA58X. And im thinking maybe the marshmallow has to do something with that? Because the moto x is on lolipop and its a beast. Sorry for the long write.
you guys do realize that you can use any nexus 6 radio on any version of android? well you can. if this radio is giving you issues, you are more than welcome to try any other radio that you like, until you find the one that works best for you. im on tmobile, am using the 27R radio, wifi calling works fine, and so does everything else.
simms22 said:
you guys do realize that you can use any nexus 6 radio on any version of android? well you can. if this radio is giving you issues, you are more than welcome to try any other radio that you like, until you find the one that works best for you. im on tmobile, am using the 27R radio, wifi calling works fine, and so does everything else.
Click to expand...
Click to collapse
I know but im thinking maybe its the T-Mobile giving problems with the signal not the phone itself? Or maybe the marshmallow is handling the radio differently then the lolipop?
samomamo said:
I know but im thinking maybe its the T-Mobile giving problems with the signal not the phone itself? Or maybe the marshmallow is handling the radio differently then the lolipop?
Click to expand...
Click to collapse
im using marshmallow on tmobile, in nyc, and no problems here. try a different radio, or a few, if the problems still persist then its probably a local tmobile issue. as i said before, im using the 27R radio.
simms22 said:
im using marshmallow on tmobile, in nyc, and no problems here. try a different radio, or a few, if the problems still persist then its probably a local tmobile issue. as i said before, im using the 27R radio.
Click to expand...
Click to collapse
I've tried every radio out there. Before MRA58X this would solve the problem but since I flashed the X build it seems every radio now that I try has same issue. It's like the new X build did some kind of software change and now I'm stuck with every single radio I use jumping all over the place. Before X I didn't have this issue..
I did call T-Mobile and they said there is no problems with the network in my area. They are sending me a new phone and I'm not flashing X period..?
beachbum40 said:
I've tried every radio out there. Before MRA58X this would solve the problem but since I flashed the X build it seems every radio now that I try has same issue. It's like the new X build did some kind of software change and now I'm stuck with every single radio I use jumping all over the place. Before X I didn't have this issue..
Click to expand...
Click to collapse
well, it could be not the radio thats the issue as well. tmo delayed marshmallows release because they found a bug, then waited for a rom update. the rom update might be the issue. no, im not on that last tmo build, but all the builds work on tmo, and all of tmos features too. maybe you should try a different marshmallow build?
simms22 said:
well, it could be not the radio thats the issue as well. tmo delayed marshmallows release because they found a bug, then waited for a rom update. the rom update might be the issue. no, im not on that last tmo build, but all the builds work on tmo, and all of tmos features too. maybe you should try a different marshmallow build?
Click to expand...
Click to collapse
I did go back to NRA58K then N then even R. But after I flashed the X build it screwed up something where now even on those older builds its screwed up my data. before I flash X I was using MRA58k N and r with no issues. But since I flashed X now on any build its screwed up . Hope that makes sense..?
I'd put up a logcat but I run purely stock anymore because of PAY which I have to have?when I get my new n6 I'm not going to flash MRA58X and I'll see how things work. If all is well then it was the X build or maybe just something in my phone broke. I guess I'll find out Monday..
I've been on stock x for about 4 days. I'm seeing none of these issues and I still have great battery life. Phone has been perfect. I took the ota though. I did not flash x
Sent from my Nexus 6 using XDA Free mobile app
I am having the exact same issue on my Nexus 6 after taking the MRA58X update. My phone never used to associate with anything besides LTE or HSPA. After updating my phone would switch between all different network modes, even those that I have never seen in my area before the update. The problem is especially bad when roaming around, but having the phone stationary can also exhibit this behavior. The sequence of events is similar to the following: LTE, HSPA, GPRS, EDGE, UMTS (3G), GPRS, EDGE, LTE for a couple seconds, GPRS, HSPA, GPRS... The network is so unstable on the 2G based networks which made using the Internet very difficult. Reverting the radio to the previous version does not fix the issue as reported by a previous user, and it seems like that the update has made some changes in a way to at affects how the radio associates with neighboring towers permanently. I would advise against taking this update if you are using T-Mobile and your device is out of warranty, as T-Mobile will most likely not cover the "damage" even though it may be OTA related. It does however seem that using the *#*#4636#*#* code and forcing the phone into LTE mode makes the mad network switching go away, although now the phone can't grab onto HSPA in LTE coverage holes and call issues in non VoLTE areas. My standby battery life also seems to be significantly reduced by all of this network searching in the background.
You have been warned...
I took the X Ota and the phone is working flawless for me. Sorry you guys are having issues
Sent from my Nexus 6 using Tapatalk
Clean flash back to lollipop and see if that changes anything.
If it doesn't, it isn't the phone/rom.
BTW I recently got the X update and so far so good but to be fair I'm on wifi alot.
(but LTE does work as before)
...and it there are indeed weird tower issues, a rep won't tell you specifics.
I'm on MRA58N with TMO in the Metro Chicago area, WiFi calling, VoLTE, and HD calling all work fine, but it seems as though my N6 is just stuck on band 4. I've never ever seen this device surf on band 12 (and I run the LTE Discovery app).