Hi, I tried searching for this here (I remember reading something about the bootloop problem) but can't seem to find the thread, so any help will be greatly appreciated.
I have successfully rooted my Z3c using this guide all the way to the very end, however I noticed that the wifi wasn't working. I figured it was simply because I hadn't flashed the 23.1.A.0.690 firmware yet, but once I did, my phone is stuck in a bootloop; the sony logo appears and the phone resets over and over. I'm still able to go into fastboot but my question is, how can I put a stop to the boot loop? should I flash the newest FW (D5803_23.1.A.1.28_Customized_US.ftf), go back to the one the phone was shipped with (D5803_23.1.A.0.726_Customized_US.ftf), or reflash the root exploit one (D5803_23.0.1.A.5.77_US.ftf)>
UPDATE: I flashed D5803_23.0.1.A.5.77_US.ftf and the phone booted up without a hitch and kept rooted.
cowboyv said:
Hi, I tried searching for this here (I remember reading something about the bootloop problem) but can't seem to find the thread, so any help will be greatly appreciated.
I have successfully rooted my Z3c using this guide all the way to the very end, however I noticed that the wifi wasn't working. I figured it was simply because I hadn't flashed the 23.1.A.0.690 firmware yet, but once I did, my phone is stuck in a bootloop; the sony logo appears and the phone resets over and over. I'm still able to go into fastboot but my question is, how can I put a stop to the boot loop? should I flash the newest FW (D5803_23.1.A.1.28_Customized_US.ftf), go back to the one the phone was shipped with (D5803_23.1.A.0.726_Customized_US.ftf), or reflash the root exploit one (D5803_23.0.1.A.5.77_US.ftf)>
UPDATE: I flashed D5803_23.0.1.A.5.77_US.ftf and the phone booted up without a hitch and kept rooted.
Click to expand...
Click to collapse
Bootloops on Android devices can be caused by multiple factors. I suggest Flashing the .93 Kitkat firmware from there Root and if I am not mistaken there are flashable ( .zip) Pre-Rooted Roms which are Lollipop found in the Android Development Section of this Area.
Just make sure to flash the FW corresponding to your Model Number either D5803/833
If you prefer the harder way you can always use Flashtool to flash the Stock 4.4 FTF it came with and upgrade from there.
Revontheus said:
Bootloops on Android devices can be caused by multiple factors. I suggest Flashing the .93 Kitkat firmware from there Root and if I am not mistaken there are flashable ( .zip) Pre-Rooted Roms which are Lollipop found in the Android Development Section of this Area.
Just make sure to flash the FW corresponding to your Model Number either D5803/833
If you prefer the harder way you can always use Flashtool to flash the Stock 4.4 FTF it came with and upgrade from there.
Click to expand...
Click to collapse
Yeah, what I did was reflash the .77 FW without wiping system, and then, from there I flashed this 5.02 image, however now I am encountering a different problem: a persisting notification stating that I need to update google play services, even when I'm using the 7.5.73 version for 036. Has any one else encountered this problem? Is there a solution to this?
cowboyv said:
Yeah, what I did was reflash the .77 FW without wiping system, and then, from there I flashed this 5.02 image, however now I am encountering a different problem: a persisting notification stating that I need to update google play services, even when I'm using the 7.5.73 version for 036. Has any one else encountered this problem? Is there a solution to this?
Click to expand...
Click to collapse
You can always download GAPPS manually, and flash it via Recovery if you think the Google Play Services that comes with your FW is bugged
Related
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
JellyFox said:
Hi everyone
I recently updated to B609 and (as expected) my phone was un-rooted.
I decided it would be better for me to just install a ROM instead of waiting for a new way to ROOT every time a new OTA comes out. (I have seen some very interesting ones that include Xposed)
This would be the first time i install a ROM on one of my phones but i do know how to use custom recovery's and i will always keep a copy of a backup close so i can flash back when something goes wrong.
A problem i have with starting all of this: I can't seem to find a way to unlock the Bootloader on my phone.
I have looked online but i always get links for older versions/other phones/German stuff.
Second problem: The recovery. As far as i understand, there is no working TWRP for EMUI3.0. BUT there should be a working CMW recovery. Should i go fot CMW?
Third problem: Which ROM? There are 3 that grabbed my attention. Se7en-Rom (But it seems like it hasn't been updated in a while), My-RoM (which seems the most interesting for me at the moment) and Miui (which i just found out about). Which should i go with or should i use another one? I can already say that i want my phone Rooted and Xposed is something i would love to have back (since i used to have it on my previous phone).
Any advice and help would be appreciated
Click to expand...
Click to collapse
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
arthios said:
I have a P7-L10 with B609. I was able to successfully root it with RootGenius. When you root it, the bootloader is unlocked at the same time. As far as I can tell, the root is 100%. As for CWM, you can get it from here:
http://forum.xda-developers.com/ascend-p7/development/mods-tweaks-kernels-recoverys-emui-2-3-t2966670
TWRP doesn't work with B609/emui3.0.
My L10 has faulty flash memory and won't accept a custom recovery, so I can't test CWM or any custom ROMs. Perhaps others can advise. Good luck!
Click to expand...
Click to collapse
RootGenius was the first thing i tried. It went up to 66% then i got an error but that was a fully Chinese version.
I just tried it again with the one i found by using Google and it goes up to 72%, then tells me that the root has failed.
Which version did you use?
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
ibeqa said:
This is what I used and it worked fine (root genius): http://forum.xda-developers.com/showthread.php?t=2789337
As for bootloader, as far as I know from, starting with firmware 133 (Emui 2.3) all devices have unlocked bootloader
CWM is the only custom recovery for the moment;
Did not try any custom ROM (I'm happy with stock ROM for the moment).
Cheers
Click to expand...
Click to collapse
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
JellyFox said:
That's the first one i tried out. The first few times it ended in an Error. I tried it again today and when my phone reboots during the process, RootGenius loses contact with my phone.
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
arthios said:
Hmmm, strange problem. Assuming you have the latest version of HiSuite installed and your drivers are current, all I can suggest is trying again with RootGenius (I used version 1.8.7) with your firewall and antivirus disabled or perhaps trying with Vroot. If you do decide to try Vroot it probably won't work unless you disable your firewall and antivirus.
Click to expand...
Click to collapse
I disabled my firewall and antivirus and gave RootGenius another try. Normally it goes up to 71% and gives me the error. Now it went to 71%, rebooted and then it gave me the error. The weird part is that right before i get the error, it says the installation is complete.
Moved on to Vroot (which is called Iroot now apparently) . It took a while longer but it wasn't able to do it either.
JellyFox said:
And there is a bootloader-ish thing, but the only options i have is reboot, factory reset and cache wipe.
Click to expand...
Click to collapse
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Z!L0G80 said:
update to b615 and flash or just flash this >> http://forum.xda-developers.com/ascend-p7/development/b615-unlocked-boot-img-t3050926 and use rootgenius remove inmutable etc...
btw there is twrp for emui 3 which mostly work fine http://forum.xda-developers.com/showpost.php?p=59340975&postcount=208
Click to expand...
Click to collapse
I still didn't get the OTA for B615 yet but thank you for the recovery.
ibeqa said:
Get in bootloader mode, if your bootloader is unlocked, it will be written and highlighted with red color. I will point out again, starting with firmware B133 (Emui 2.3) all bootloaders for L10 version (I don't know for Chinese versions) are unlocked
Cheers.
Click to expand...
Click to collapse
You were right! (not that i every doubted you). I found the problem i had: For some reason, i couldn't boot in bootloader trough my phone BUT i was able to do it with 'adb reboot bootloader'. After making some idiotic mistakes and having to re-flash the stock ROM, I finally was able to install My-RoM v3.3, its rooted, i have Xposed so i am happy
So thank everyone for the help!
I rooted my device following the instructions here:
http://forum.xda-developers.com/tab-s2/general/guide-root-tab-s2-t3205019
Then I started installing my root apps, one of them being CF.lumen, but the app kept asking to install Chainfire3d. So I did and the device fell into bootloop on the very first day: I didn't even get to use it for heaven's sake.
My Device: T710, Lollipop 5.1.1, 8.0 Inch
Location: US
Cellular ROMS that I tried: T710XXU1BOH7_T710XAR1BOH7_XAR & T710XXU1BOH6_T710XAR1BOH6_XAR
I cleared the cash and factory reset the device hoping it would help, but it didn't. I tried to flash few ROMS including the Cellular South ROMS from here to no avail:
http://www.sammobile.com/firmwares/database/SM-T710/
I can still root and and flash TWRP but I don't seem to be able to flash ROM and get out of this ditch. Please help if you have any idea what should I do.
dioib said:
I rooted my device following the instructions here:
http://forum.xda-developers.com/tab-s2/general/guide-root-tab-s2-t3205019
Then I started installing my root apps, one of them being CF.lumen, but the app kept asking to install Chainfire3d. So I did and the device fell into bootloop on the very first day: I didn't even get to use it for heaven's sake.
My Device: T710, Lollipop 5.1.1, 8.0 Inch
Location: US
Cellular ROMS that I tried: T710XXU1BOH7_T710XAR1BOH7_XAR & T710XXU1BOH6_T710XAR1BOH6_XAR
I cleared the cash and factory reset the device hoping it would help, but it didn't. I tried to flash few ROMS including the Cellular South ROMS from here to no avail:
http://www.sammobile.com/firmwares/database/SM-T710/
I can still root and and flash TWRP but I don't seem to be able to flash ROM and get out of this ditch. Please help if you have any idea what should I do.
Click to expand...
Click to collapse
Have you tried flashing stock firmware with odin?
android4life92 said:
Have you tried flashing stock firmware with odin?
Click to expand...
Click to collapse
I didn't know my stock version so that is why I was trying different versions. But just few minutes ago I found it, it was T710XXU2BOJ1_T710XAR2BOJ1_XAR by Cellular South (for US, got it from sammobile). Thanks to @ashyx for mentioning "Cellular South" in response to a similar problem someone else had on this board.
hi
all, i have nexus 6 device with 6.0 MRA58R and open bootloader and it was update by the device from google,still before that i try to do root and didn't succeedwith 5.1, so i go back to 5.1 and it was update as i said but the device is stuck by the start or just by regular use...something is wrong and i don't know what, there is also sound when it stuck like A screech sound and it stuck
what to do next?
thanks
If your bootloader is unlocked, as mentioned in your other thread, download a stock image from Google and flash its components (except userdata.img) using ADB. As a result of your tinkering, something got messed up on the device, and flashing the stock image should resolve that.
tried these ...didn't help,it stuckes even after good flash with adb cause with OTA it stucks at the middle
You flashed MMB29Q from the shamu section of the page here? That is the absolute latest factory image available. There should be NO OTA update available.
first of all i tried to download the OTA cause i was with root and did unroot and i want to saw thet it get's the OTA's correct ,then i installed the version as you write, but still when i start the wifi or in regular use the device can be stuck and restart.
any idea to solve it? even in safe mode it stucks
No, not really. Like you mention in your other thread, it appears to be a hardware problem.
For the record, downloading the OTA updates is a waste of time when the latest factory image is available. When you get your replacement device, assuming it's not already on 6.0.1, install the image from the link I gave you, as it already includes in the image all the updates Google has released for Android 6.0.1.
Hi.
I'm just wondering if anybody can help me please?
I have a UK Huawei P9 EVA-L09 with Marshmallow currently on it (B166) build I think. It is unlocked and has TWRP 3.0.2.0 Recovery installed on it.
I would like to upgrade to Nougat 7.0 and EMUI 5.0, but most of my attempts have failed and I have had to use the rollback method to get back to Marshmallow.
I have tried to do it by flashing an Update.zip and subsequent EU_Apps package.zip through TWRP to no avail.
I have also tried the 'Dload' folder method, also to no avail. The closest I've gotten is to build no B378, but it shows up as NRD90M Test-Keys on the Build No in the phone settings instead and all apps such as camera, NFC, Bluetooth are missing / not working etc. Trying to then flash the EU_Apps package through 'Dload' method doesn't alleviate the problem of missing apps.
Does anybody have any tips for what I could try to get it onto a working Nougat build with apps please?
Also, if anybody has any links to any relevant firmware etc, then that would be very helpful too.
I'm pulling my hair our trying to get this to work. Surely it's can't be that hard can it??
Many thanks, Bill.
Is your phone branded? For a particular UK network I mean? And if so are you flashing ROMs for that network?
I don't know if that's the problem but I was on Vodafone UK B137 (which is Marshmallow) and flashed the 2 update zips for a Vodafone Nougat ROM thru TWRP and it was successful. I then flashed an updated zip using the "dload method" and that was successful too.
When you say you flashed the zips in TWRP "to no avail", what exactly was the end result?
Also might help if you give the full version of your starting ROM, and what zips you were trying to flash, ie full names and sources.
I'm kinda new to this device forum but seems like people get varying results with different flashing methods, for no particular reason either!
Peace.
chris5s said:
Is your phone branded? For a particular UK network I mean? And if so are you flashing ROMs for that network?
I don't know if that's the problem but I was on Vodafone UK B137 (which is Marshmallow) and flashed the 2 update zips for a Vodafone Nougat ROM thru TWRP and it was successful. I then flashed an updated zip using the "dload method" and that was successful too.
When you say you flashed the zips in TWRP "to no avail", what exactly was the end result?
Also might help if you give the full version of your starting ROM, and what zips you were trying to flash, ie full names and sources.
I'm kinda new to this device forum but seems like people get varying results with different flashing methods, for no particular reason either!
Peace.
Click to expand...
Click to collapse
Hi. Thanks for your reply.
When I tried to flash .Zips through TWRP it kept coming up with errors and didn't flash them (something about being umnable to mount /System).
I was on EE UK, but found a method yesterday for debranding my phone and setting it to C432. I also managed to successfully flash C432B182 firmware on it.
I have since attempted to flash Nougat B360 using the 'Dload' method and now my phone keeps asking me to enter my password to decrypt storage. Multiple attempts to reset my phone and wipe cache partitian don't seem to be working. Do you have any idea how I can get around this?
It's so hard and it's so annoying how other people seem to be getting it right and mine is proving to be a swine. Makes me want to get rid of it to be honest and get something easier.
Thanks again, Bill.
I'm concerned that this may be bricked right now. No amount of using eRecovery to reset the phone will stop it from going onto the dreaded 'enter password to decrypt storage' screen! I will see if I can re flash it using Fastboot, but I'm a bit concerned right now...
I have an O2 Branded one. I'm too chicken to mess with it in case I brick it!
Just waiting for the official UK O2 OTA update to arrive &
tmohammad said:
I have an O2 Branded one. I'm too chicken to mess with it in case I brick it!
Just waiting for the official UK O2 OTA update to arrive &
Click to expand...
Click to collapse
Probably advisable unless you absolutely know what you're doing and don't mind taking the risk. I'm a bit annoyed with Huawei and my carrier, they are always so slow with providing updates and Hmui 5.0 is only what Hmui 4.0 should have been in the first place. I'm done with these manufacturer's stupid over bloated overlays and will be going to an official Google phone in future!
If you can get it into fastboot mode, flash TWRP, then you should be able to progress from there, hopefully by at least formatting data to get rid of the encryption! Sounds like.a royal pita tho to be honest.
When I flashed to Nougat from MM using TWRP I got a bunch of error messages too, but it (eventually) booted up ok....
chris5s said:
If you can get it into fastboot mode, flash TWRP, then you should be able to progress from there, hopefully by at least formatting data to get rid of the encryption! Sounds like.a royal pita tho to be honest.
When I flashed to Nougat from MM using TWRP I got a bunch of error messages too, but it (eventually) booted up ok....
Click to expand...
Click to collapse
Hi again all.
Success! I finally managed to crack it.
I downloaded MM Firmware version C432B136 and used Huawei Extractor to extract the Boot.img, Recovery.img and System.img files and was able to boot into Fastboot mode fortunately. I used a Command Prompt to unlock the Bootloader again and flashed each .img file in line.
The phone booted up into the B136 firmware and I was then able to update OTA to B166, but not B182 strangely. So I downloaded a B182 version firmware and placed it in the 'dload' folder of the phone's S.D Card, before forcibly flashing it by holding volume up, volume down and the power button on boot up.
I subsequently used the below link, which showed me how to use Huawei Updater and HiSuite to update to B361 firmware.
https://forum.xda-developers.com/showpost.php?p=70594380&postcount=2
Once on Nougat B361 firmware, my phone's update setting prompted me to update to the latest B378 firmware OTA.
Finally, to achieve Root status I followed the below guide and am now running root with SuperUser and BusyBox installed. I'm happy to report that both Nougat 7.0 and HMUI 5.0 are running smoothly on my phone and all features are working (i.e. Bluetooth, Camera and NFC) and performance and battery life are all noticeably better than ever.
https://forum.xda-developers.com/showpost.php?p=70927601&postcount=456
Be aware that my phone is EVA-L09, so I followed all guides and downloaded all firmware that related to my specific phone model.
Phew! Thanks for all of your help and good luck to those who are attempting to get this working.
Bill.
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
AbhiM7 said:
Hi guys, I have a OP3 which is running on 3.1.2 Marshmallow.
I always get a notification for system update to 4.5.1. I've tried downloading and installing the update but after the first boot my OP crashes/gets bricked. There is only a Linux penguin logo that appears no matter what button you press.
From there I always have to follow the mega unbrick guide and get my phone back to working with stock recovery and 3.1.2.
I've tried side loading the downloaded file as well.
Then I've tried installing .zip file of 5.0.1 via TWRP, still no luck. it still bricks my phone.
Am comfortable rooting my phone, my bootloader is unlocked. I don't care too much about keeping root after updating my phone to the latest version, I would be grateful to anyone who can point me towards the proper full ROM files of 5.0.1 along with any firmware files that may be required.
And the exact process of when to flash the firmware and with/without which version of TWRP. I am ready to completely wipe and clear data.
in simple words I just want to update from 3.1.2 to 5.0.1. The simple downloading and updateing from the OTA update doesn't work.
Click to expand...
Click to collapse
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
hellcat50 said:
Try this: https://downloads.oneplus.com/oneplus-3/oneplus_3_oxygenos_5.0.1/
Click to expand...
Click to collapse
Hi, I've already downloaded this very stable file and tried flashing using TWRP
AbhiM7 said:
Hi, I've already downloaded this very stable file and tried flashing using TWRP
Click to expand...
Click to collapse
I read something about wrong batteries causing this problem. Do you use the original battery?
hellcat50 said:
I read something about wrong batteries causing this problem. Do you use the original battery?
Click to expand...
Click to collapse
I though of running a diagnosis check by dialing *#808# and looked up Charger option, it shows the battery as "itech_3000mah"
is that original?
I had given the phone to repair for water damage to a professional service chain (Not OnePlus, some company here called Yaantra). I've heard from talking to an official repair person of OnePlus that fake batteries are not possible for OnePlus.
The battery works absolutely alright, charges up nicely and I get decent SOT. Can't complain at all.