Related
Hi,
I have moto g 2014 dual sim. today I tried to reflash the os but got "Failed to validate system image" upon reboot. So I unlocked the bootloader and again reflashed the os but got bootloop.. Please tell me how to boot my moto G 2014?
Read the instructions and flash it correctly with the correct firmware. Also post your question in the correct section.
If you have winrar or 7zip you can extract the firmware and take the "boot.img" file and flash it separate from the other firmware and it should work. That's how I do mine.
Sent from my Moto G using XDA Premium 4 mobile app
Sorry for posting in different section, but I need help
eksasol said:
Read the instructions and flash it correctly with the correct firmware. Also post your question in the correct section.
Click to expand...
Click to collapse
Let me tell you the series of events that led me to have bricked Moto G 2014:
1. I had X1068 Moto G 2-14
2. Wanted to reflash firmware and followed the steps provided in 4.2 section here http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
3. I got "Failed to Validate System Image" when I tried to reboot.
4. I was advised to unlock bootloader and reflash firmware. I did the same but got bootloop when I tried to reboot.
5. Now when I power on the phone, bootloader unlocked warning message comes and the screen blinks with the same message..
Please help Bro..
Who ever told you to unlock bootloader to flash firmware is giving bad advice. It is not required to unlock the bootloader to flash the factory firmware.
Make sure you're using the driver from here: http://www.mymotocast.com/download/MDM?platform=windows
(If you have other Android ADB drivers installed, uninstall them first, before installing this one.)
Make sure you are using mfastboot.exe, not the regular fastboot.exe.
Make sure your downloaded firmware is not corrupt and you got the correct version of the firmware for your device, there are different ones.
Download the firmware from here: http://sbf.droid-developers.org/phone.php?device=36
I believe your file is "Blur_Version.21.11.14.titan_retaildsds.retaildsdsall.en.03", but check on it.
After you reflash, make sure you boot into recovery mode and do a factory wipe.
The firmware for this phone is split into 3 files, so make sure you flash all three of them.
Issue Resolved
DillonFixDroids said:
If you have winrar or 7zip you can extract the firmware and take the "boot.img" file and flash it separate from the other firmware and it should work. That's how I do mine.
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bro.. It was my mistake not to flash all files in the firmware folder.. apart from three system files (0,1,2), we also need to flash fourth system file (3) in the firmware folder... Thanks again bro...
MotoG 2nd Gen
Folks, I got a MotoG 2nd Gen (XT1068) I'm trying to root it but not successful. The main reason for rooting is that I want to record all my calls. Any solution?
Thanks,
Raj.
4dglobal said:
Folks, I got a MotoG 2nd Gen (XT1068) I'm trying to root it but not successful. The main reason for rooting is that I want to record all my calls. Any solution?
Thanks,
Raj.
Click to expand...
Click to collapse
Please be more presice, have you unlocked bootloader, before trying to flash the recovery?
Greetings from Venezuela. Just recently, I bought a new Moto G since my old S3 got severly damaged which made it unrepairable. I loved the reviews about de Moto G, but sadly since I got it I've had no luck with it.
While being connected to a WiFi connection, just looking around the celphone's settings, the phone required a system update straight off the bat. I had noticed before the update that the phone was instantly rebooting once the inactivity timer went off locking itself. Obviously after some time I did notice it by locking the phone manually (pressing the power button). I'm not that geeky or experienced in the Android field, but by doing some research on the web I've read some stuff that makes me not lose all hope on the phone, making me want to fix it.
I've tried factory resets, recoverys and nothing has worked. It has made me really frustrated not being able to fix the issue. All I've really done refering to flashing is unlocking bootloader, but still without flashing anything yet to make sure what I'm doing is the right thing to do.
Specs
Android version: 5.0.2
Baseband version: MSM8626BP_1032.3112.97.00R
RETUSA_AWS_CUST
Kernel version: 3.4.42-gf18cb80
System version: 22.46.12.titan_retuaws.retuaws.en.US retus
Need help with this, and I'll be eternally grateful with anyone that can help me.
P.S: new to the forums. In any case that I'm missing something, let me know.
joserodriguezv said:
Greetings from Venezuela. Just recently, I bought a new Moto G since my old S3 got severly damaged which made it unrepairable. I loved the reviews about de Moto G, but sadly since I got it I've had no luck with it.
While being connected to a WiFi connection, just looking around the celphone's settings, the phone required a system update straight off the bat. I had noticed before the update that the phone was instantly rebooting once the inactivity timer went off locking itself. Obviously after some time I did notice it by locking the phone manually (pressing the power button). I'm not that geeky or experienced in the Android field, but by doing some research on the web I've read some stuff that makes me not lose all hope on the phone, making me want to fix it.
I've tried factory resets, recoverys and nothing has worked. It has made me really frustrated not being able to fix the issue. All I've really done refering to flashing is unlocking bootloader, but still without flashing anything yet to make sure what I'm doing is the right thing to do.
Specs
Android version: 5.0.2
Baseband version: MSM8626BP_1032.3112.97.00R
RETUSA_AWS_CUST
Kernel version: 3.4.42-gf18cb80
System version: 22.46.12.titan_retuaws.retuaws.en.US retus
Need help with this, and I'll be eternally grateful with anyone that can help me.
P.S: new to the forums. In any case that I'm missing something, let me know.
Click to expand...
Click to collapse
SEE POST#3 USA AWS CARRIERS for latest update - READ INSTRUCTIONS
reefuge said:
SEE POST#3 USA AWS CARRIERS for latest update - READ INSTRUCTIONS
Click to expand...
Click to collapse
I followed the inscrutions, successfully flashing stock rom. But the bug is still there since the phone keeps rebooting once the screen is locked. Still need to know if there's any fix. Thanks for the help!
A New Problem
I recently got an ~138mb OTA update, tried to install it, after downloading it, but it failed at default recovery installer, rebooting with an error message saying "Update installation unsuccessful". Hence, I tried it with a custom recovery TWRP installed in my mobile, with TWRP manager app for android (with my phone rooted obviously) So after downloading update, on giving install, it goes to TWRP recovery main menu, from there I dont know how to install the downloaded update, or where it is available to browse to... Being unsure, I rebooted it to normal boot up, but no matter what I do now, the phone after turning on in the home screen, automatically powers down(switching off) to TWRP recovery main menu, I am stuck here please help me, someone.
I dont wanna lose all my data!! Give me a suitable solution
Goutham_SRIRAM said:
I recently got an ~138mb OTA update, tried to install it, after downloading it, but it failed at default recovery installer, rebooting with an error message saying "Update installation unsuccessful". Hence, I tried it with a custom recovery TWRP installed in my mobile, with TWRP manager app for android (with my phone rooted obviously) So after downloading update, on giving install, it goes to TWRP recovery main menu, from there I dont know how to install the downloaded update, or where it is available to browse to... Being unsure, I rebooted it to normal boot up, but no matter what I do now, the phone after turning on in the home screen, automatically powers down(switching off) to TWRP recovery main menu, I am stuck here please help me, someone.
I dont wanna lose all my data!! Give me a suitable solution
Click to expand...
Click to collapse
ota can only be installed to non rooted stock roms with stock recovery
tbh you need to minimum factory reset
but I believe you will need to install stock rom from scratch
---------- Post added at 06:54 PM ---------- Previous post was at 06:52 PM ----------
joserodriguezv said:
I followed the inscrutions, successfully flashing stock rom. But the bug is still there since the phone keeps rebooting once the screen is locked. Still need to know if there's any fix. Thanks for the help!
Click to expand...
Click to collapse
Never had or seen this all I can suggest is a factory reset twice and a few reboots to see if settles down
Guys i need help! I have the european Dual Sim Moto 2nd gen, locked bootloader and i tried to install Android Marshmallow via the indian zip (soak test) that i found in XDA. After installing the update via internal storage, it got stuck in optimizing 157 apps/158, it bootlooped and now it stucked it 1/1 optmizing ... What can i do???
Please, anything.
Hi, I tried searching for this here (I remember reading something about the bootloop problem) but can't seem to find the thread, so any help will be greatly appreciated.
I have successfully rooted my Z3c using this guide all the way to the very end, however I noticed that the wifi wasn't working. I figured it was simply because I hadn't flashed the 23.1.A.0.690 firmware yet, but once I did, my phone is stuck in a bootloop; the sony logo appears and the phone resets over and over. I'm still able to go into fastboot but my question is, how can I put a stop to the boot loop? should I flash the newest FW (D5803_23.1.A.1.28_Customized_US.ftf), go back to the one the phone was shipped with (D5803_23.1.A.0.726_Customized_US.ftf), or reflash the root exploit one (D5803_23.0.1.A.5.77_US.ftf)>
UPDATE: I flashed D5803_23.0.1.A.5.77_US.ftf and the phone booted up without a hitch and kept rooted.
cowboyv said:
Hi, I tried searching for this here (I remember reading something about the bootloop problem) but can't seem to find the thread, so any help will be greatly appreciated.
I have successfully rooted my Z3c using this guide all the way to the very end, however I noticed that the wifi wasn't working. I figured it was simply because I hadn't flashed the 23.1.A.0.690 firmware yet, but once I did, my phone is stuck in a bootloop; the sony logo appears and the phone resets over and over. I'm still able to go into fastboot but my question is, how can I put a stop to the boot loop? should I flash the newest FW (D5803_23.1.A.1.28_Customized_US.ftf), go back to the one the phone was shipped with (D5803_23.1.A.0.726_Customized_US.ftf), or reflash the root exploit one (D5803_23.0.1.A.5.77_US.ftf)>
UPDATE: I flashed D5803_23.0.1.A.5.77_US.ftf and the phone booted up without a hitch and kept rooted.
Click to expand...
Click to collapse
Bootloops on Android devices can be caused by multiple factors. I suggest Flashing the .93 Kitkat firmware from there Root and if I am not mistaken there are flashable ( .zip) Pre-Rooted Roms which are Lollipop found in the Android Development Section of this Area.
Just make sure to flash the FW corresponding to your Model Number either D5803/833
If you prefer the harder way you can always use Flashtool to flash the Stock 4.4 FTF it came with and upgrade from there.
Revontheus said:
Bootloops on Android devices can be caused by multiple factors. I suggest Flashing the .93 Kitkat firmware from there Root and if I am not mistaken there are flashable ( .zip) Pre-Rooted Roms which are Lollipop found in the Android Development Section of this Area.
Just make sure to flash the FW corresponding to your Model Number either D5803/833
If you prefer the harder way you can always use Flashtool to flash the Stock 4.4 FTF it came with and upgrade from there.
Click to expand...
Click to collapse
Yeah, what I did was reflash the .77 FW without wiping system, and then, from there I flashed this 5.02 image, however now I am encountering a different problem: a persisting notification stating that I need to update google play services, even when I'm using the 7.5.73 version for 036. Has any one else encountered this problem? Is there a solution to this?
cowboyv said:
Yeah, what I did was reflash the .77 FW without wiping system, and then, from there I flashed this 5.02 image, however now I am encountering a different problem: a persisting notification stating that I need to update google play services, even when I'm using the 7.5.73 version for 036. Has any one else encountered this problem? Is there a solution to this?
Click to expand...
Click to collapse
You can always download GAPPS manually, and flash it via Recovery if you think the Google Play Services that comes with your FW is bugged
Hi,
First post on here. I have bought the SM-N9200 in China after my Z3 screen broke for the second time. I live here (china) at the moment but did not realise that you would be unable to install google play services and therefore google play on the phone. I have a fair few apps purchased on GP and would like them on my phone.
I have read that I would need to have root access prior to being able to install GP but I am running into problems. I have never rooted before even though I was aware of the process etc but have so far been unsuccessful using kingoroot and I cannot seem to find a root method for the Chinese n9200. I saw today that the spaceX kernel supports N9200 so I thought that I would flash twrp with odin and then consider flashing spaceX. However when I try and flash TWRP it fails and the phone displays a message in Chinese that I cannot read as my Chinese is not that great still.
I am not in a hurry to install a custom rom at the moment and mainly just want to be able to get my apps. Can anyone suggest a method? is it possible to install HK Rom onto Chinese n9200 for example?
Many thanks
DarthJ said:
Hi,
First post on here. I have bought the SM-N9200 in China after my Z3 screen broke for the second time. I live here (china) at the moment but did not realise that you would be unable to install google play services and therefore google play on the phone. I have a fair few apps purchased on GP and would like them on my phone.
I have read that I would need to have root access prior to being able to install GP but I am running into problems. I have never rooted before even though I was aware of the process etc but have so far been unsuccessful using kingoroot and I cannot seem to find a root method for the Chinese n9200. I saw today that the spaceX kernel supports N9200 so I thought that I would flash twrp with odin and then consider flashing spaceX. However when I try and flash TWRP it fails and the phone displays a message in Chinese that I cannot read as my Chinese is not that great still.
I am not in a hurry to install a custom rom at the moment and mainly just want to be able to get my apps. Can anyone suggest a method? is it possible to install HK Rom onto Chinese n9200 for example?
Many thanks
Click to expand...
Click to collapse
To flash in Odin you need to enable OEM unlock in Developer Settings.
I tried installing Chinese on HK and it failed (Cache.img)
OEM unlock and USB debugging are on. Odin was run as Admin.
If you try flashing the wrong TWRP (i.e not for your phone) will it fail or will it still flash. I was trying to TWRP for the DUOS version which i am assuming is my phone as DUOS is the dual sim variant?
I will get a chinese friend to tell me what the message is and take a photo of what happens.
Essentially i boot into DL mode and then attempt to flash when the bar fills up the odin still says recovery but the screen on the phone gives me warning (triangle with exclamation) and some information including a the web address for samsung.com/cn
I can help with that Chinese message. There are some problems for you to use GP in China. First, you can use Odin to install HK (TGY) Rom( remember to backup before u do so). After you install HK Rom, you need to connect to a VPN and then go to Google settings.
Hope these info would help you.
Possible solution found in another thread. it seems that the bootloader is locked on some devices and therefore you cannot flash anything.
http://forum.xda-developers.com/not...ote-5-root-t3214234/post63073600#post63073600
One question. What would be the difference between the HK and Chinese versions of N9200 other than some restrictions. Is it safe to use guides like the one linked for a chinese version?
cxhugh said:
I can help with that Chinese message. There are some problems for you to use GP in China. First, you can use Odin to install HK (TGY) Rom( remember to backup before u do so). After you install HK Rom, you need to connect to a VPN and then go to Google settings.
Hope these info would help you.
Click to expand...
Click to collapse
So i can simply flash stock HK rom onto my N9200? sorry for my ignorance, i am very new to this. what is TGY?
DarthJ said:
So i can simply flash stock HK rom onto my N9200? sorry for my ignorance, i am very new to this. what is TGY?
Click to expand...
Click to collapse
TGY is the name for HK ROM. You can find it on samsung-updates. Both Mainland and HK variant share the same specs, which is N9200.
SUCCESS!
So after much stress I have a rooted, TWRP'd, Romd N9200 Chinese version. I say stressed as I had some problems when i flashed TWRP in that it would not let me boot back into the stock rom. this leads me to one unanswered question. When flashing TWRP with ODIN is it a requirement to flash a new rom?? I say this as I had the following problem. When I first flashed twrp the phone booted into stock so I rebooted into recovery only to find stock recovery and no twrp. I checked that the KNOX counter had been tripped (it had) but I was confused. I read on twrp website that on some devices if you let phone reboot into stock after twrp flash rom it overwrites custom recovery. I eventually flashed twrp and quickly pressed key combination for recovery and I had twrp but then I could not boot into stock rom (bootloop).
After spending the afternoon in a state of panic I reflashed the stock rom from Sammobile and was back in business. crisis over and a bit of confidence gained.
I am now using SpaceX kernel following this thread:
http://forum.xda-developers.com/note5/development/kernel-spacex-pure-edition-stock-t3236317
so far no problems so thanks to @Manh_IT
Here is my step by step if anyone finds themselves in same position:
1) unlock OEM and USB Debugging and backup everything using SmartSwitch (this replaced Kies I believe)
2)download CROM apk from Samsung appstore to unlock bootloader
3)Download SpaceX, SuperSU.apk, Gapps and twrp and place all except twrp onto phone memory
4)Flash TWRP with ODIN and reboot into recovery using method described above if need be.
5)factory reset in twrp
6)flash SpaceX and Gapps
7)reboot system and install SuperSU
I hope this helps someone.:good:
Anyone rooted in n9200 with latest OKA firmware?
actually you don't need to root your device...
just make sure OEM unlocked and find a HK version stock ROM and install it with Odin
vhxlyt said:
actually you don't need to root your device...
just make sure OEM unlocked and find a HK version stock ROM and install it with Odin
Click to expand...
Click to collapse
Can i ask sir how do you do that? Thanks
rcsiccion said:
Can i ask sir how do you do that? Thanks
Click to expand...
Click to collapse
well if you use N9200(CN)...you can follow the steps to get gapps
Once you use Crom.apk, you lose your warranty , so DON'T use CROM to unlock the phone
Make sure OEM unlocked
Reset to factory in case of some issues
Turn off the phone
Take the sim out of the phone
Get into download mode
Plug to PC and use ODIN to flash the HK stock ROM.
gapps will be install , no root, and you wont lose you warranty , but the battery saving is not as good as CN version.
I have gapps on my note 5 n9200
DarthJ said:
SUCCESS!
So after much stress I have a rooted, TWRP'd, Romd N9200 Chinese version. I say stressed as I had some problems when i flashed TWRP in that it would not let me boot back into the stock rom. this leads me to one unanswered question. When flashing TWRP with ODIN is it a requirement to flash a new rom?? I say this as I had the following problem. When I first flashed twrp the phone booted into stock so I rebooted into recovery only to find stock recovery and no twrp. I checked that the KNOX counter had been tripped (it had) but I was confused. I read on twrp website that on some devices if you let phone reboot into stock after twrp flash rom it overwrites custom recovery. I eventually flashed twrp and quickly pressed key combination for recovery and I had twrp but then I could not boot into stock rom (bootloop).
After spending the afternoon in a state of panic I reflashed the stock rom from Sammobile and was back in business. crisis over and a bit of confidence gained.
I am now using SpaceX kernel following this thread:
http://forum.xda-developers.com/note5/development/kernel-spacex-pure-edition-stock-t3236317
so far no problems so thanks to @Manh_IT
Here is my step by step if anyone finds themselves in same position:
1) unlock OEM and USB Debugging and backup everything using SmartSwitch (this replaced Kies I believe)
2)download CROM apk from Samsung appstore to unlock bootloader
3)Download SpaceX, SuperSU.apk, Gapps and twrp and place all except twrp onto phone memory
4)Flash TWRP with ODIN and reboot into recovery using method described above if need be.
5)factory reset in twrp
6)flash SpaceX and Gapps
7)reboot system and install SuperSU
I hope this helps someone.:good:
Click to expand...
Click to collapse
Hi great to heard that you have managed to resolved this issue. I have the same problem ( I bought my Note 5 in Beijing recently), so please can you explain what I need to do? I can do point 1 & 2 but stuck on point 3 and the rest. Where do I get all these files from?
Many thanks
Peace All...
I am currently on Minotauras ROM (MM) and would like to update my Note 5 920G to the latest Nougat firmware---so I can download a Nougat custom ROM (i know one is not dependent on the other, but I was always taught that if the base changes, its best to update the firmware to avoid any potential problems). However, I'm unclear as to what steps should be taken to update the firmware--I'm relatively new to SamSung devices. I know Odin is the update utility, but unclear whether I should first flash a "stock" Marshmallow Recovery and stock ROM--then take OTA...or can I just flash the Nougat firmware and then flash TWRP? What happens to my data & apps? Will all settings be erased?
Please advise.....
ZEDEK said:
Peace All...
I am currently on Minotauras ROM (MM) and would like to update my Note 5 920G to the latest Nougat firmware---so I can download a Nougat custom ROM (i know one is not dependent on the other, but I was always taught that if the base changes, its best to update the firmware to avoid any potential problems). However, I'm unclear as to what steps should be taken to update the firmware--I'm relatively new to SamSung devices. I know Odin is the update utility, but unclear whether I should first flash a "stock" Marshmallow Recovery and stock ROM--then take OTA...or can I just flash the Nougat firmware and then flash TWRP? What happens to my data & apps? Will all settings be erased?
Please advise.....
Click to expand...
Click to collapse
1)You are on stock Marshmallow 6.0.1 right as i guess so? Then you have MM bootloader(But if you are on 5.0.1 lollipop bootloader then you need atleast upgrade you bootloader to 6.0.1, you can find MM bootloaders at Samsung galaxy note 5 android development thread anywhere mostly at Dr.ketan Rom N8 S8+ port/You can also find Nougat bootloaders there only)
2)Don't worry then if you want to upgrade to any custom nougat rom then you can simply download prefer one and install through TWRP as you installed Minotorus Rom(Assuming You are on Marshmallow Bootloader and Oem unlocking/Usb debugging options are enabled from Developers option)
3)Or if you want to update your stock firmware to official Nougat for updated model and bootloader after that want to try Custom nougat rom, then you can download official Stock 7.0 firmware for your device N920G and specific country if available from websites like sammobile.com or samsungupdates.com etc (I am unknown about your country afaik samsung released 7.0 for N920G for some specific countries atm, like for asian countries not for latin american countries)
4)Further Odin flashing guides you can find also here within forum only, if you have any query related to odin flashing you can ask me i will provide you Odin flashing guide also(Kindly don't forget to enable Oem unlocking and Usb debugging option from developers option before flashing anything using Odin or you may brick your device)
5)You can also flash official stock 6.0.1 and update through OTA to 7.0 but above mentioned method is easy to directly update to nougat(Only if official Stock 7.0 nougat firmware available for your device model no and country)
6)While updating to stock firmware using odin, all your user data stored on internal storage will be lost(If you directly flash custom nougat rom on minotorus rom then user data stored on internal storage will be there) so i will suggest you take backup of your current data
Peace!!
First off--THANK YOU DroidHackeR for your response. I was out of town so I coulnt respond sooner. But Yes...I'm on MM 6.01 and I would prefer to upgrade to the offical 7.0 firmware. My model number is 920G, which I think is an International model.I am in the Unite States and using Tmobile's bands. I looked on sammobile and saw that they did have the official firmware (but for Bangladesh, India--I didnt see anything that said International...and thats where I kinda got stuck, cause I dont know if that firmware would be compatible). With that being said--I guess my best option would be to flash an official stock 6.01 firmware and then take the update? I have OEM unlocking and USB debugging enabled.
Could you please walk me through flashing via Odin? Like where would I find the stock 6.01 firmware? Sammobile as well? I know I will loose my data..I've backed up most of my files.
Thank you again for help!
ZEDEK said:
Peace!!
First off--THANK YOU DroidHackeR for your response. I was out of town so I coulnt respond sooner. But Yes...I'm on MM 6.01 and I would prefer to upgrade to the offical 7.0 firmware. My model number is 920G, which I think is an International model.I am in the Unite States and using Tmobile's bands. I looked on sammobile and saw that they did have the official firmware (but for Bangladesh, India--I didnt see anything that said International...and thats where I kinda got stuck, cause I dont know if that firmware would be compatible). With that being said--I guess my best option would be to flash an official stock 6.01 firmware and then take the update? I have OEM unlocking and USB debugging enabled.
Could you please walk me through flashing via Odin? Like where would I find the stock 6.01 firmware? Sammobile as well? I know I will loose my data..I've backed up most of my files.
Thank you again for help!
Click to expand...
Click to collapse
Well you can always flash the MM firmware in odin then take the OTA but ive always just flashed the new firmware via odin just because it easy.
And flashing firmware via odin will not wipe your device unless you change your CSC.ive used odin literally 100s of time across numerous devices over the years and it never has wiped my device...common misconception for some reason.
But of course first you need to find the correct firmware for your device on sammobile.
Then once downloaded un zip it and load the tar in the AP slot in odin.
Occasionally a factory reset is needed for the device to boot and that will wipe your storage.
There are tons of tutorials on how to use odin...hit that search button, use Google or even hit you tube for videos (which are useful if your a total n00b since you can see how it runs so no surprises).
If you do it once after that it will seem so easy.
Sent from my S8 plus, Note 7, S7 Edge or S6
force70 said:
Well you can always flash the MM firmware in odin then take the OTA but ive always just uflashed the new firmware via odin just because it easy.
And flashing firmware via odin will not wipe your device unless you change your CSC.ive used odin literally 100s of time across numerous devices over the years and it never has wiped my device...common misconception for some reason.
But of course first you need to find the correct firmware for your device on sammobile.
Then once downloaded un zip it and load the tar in the AP slot in odin.
Occasionally a factory reset is needed for the device to boot and that will wipe your storage.
There are tons of tutorials on how to use odin...hit that search button, use Google or even hit you tube for videos (which are useful if your a total n00b since you can see how it runs so no surprises).
If you do it once after that it will seem so easy.
Sent from my S8 plus, Note 7, S7 Edge or S6
Click to expand...
Click to collapse
Hi,
Thanks for your inputs. I tried same steps for my N9208 dual SIM with stock 6.0.1 firmware from sammobile.
After Odin flash, boots to stock recovery and throws dm-verify check failed error.
Please share your suggestions.
TheRealFighter said:
Hi,
Thanks for your inputs. I tried same steps for my N9208 dual SIM with stock 6.0.1 firmware from sammobile.
After Odin flash, boots to stock recovery and throws dm-verify check failed error.
Please share your suggestions.
Click to expand...
Click to collapse
I would suggest that next time you use the search function to try and help your self first as learning is key here.
That said i did a quick search for you which led to many results but this is an excellent read.
https://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306/page2
force70 said:
I would suggest that next time you use the search function to try and help your self first as learning is key here.
That said i did a quick search for you which led to many results but this is an excellent read.
https://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306/page2
Click to expand...
Click to collapse
I did read that thread. Too many answers and not much clarity.
Hence asked you.
Anyway thanks.
TheRealFighter said:
I did read that thread. Too many answers and not much clarity.
Hence asked you.
Anyway thanks.
Click to expand...
Click to collapse
That was only one of numerous results which resulted from a quick search though i posted that because i am familiar with it.
Sent from my S8 plus, Note 7, S7 Edge or S6
*Need a working 6.01 Firmware for 920G International*
force70 said:
Well you can always flash the MM firmware in odin then take the OTA but ive always just flashed the new firmware via odin just because it easy.
And flashing firmware via odin will not wipe your device unless you change your CSC.ive used odin literally 100s of time across numerous devices over the years and it never has wiped my device...common misconception for some reason.
But of course first you need to find the correct firmware for your device on sammobile.
Then once downloaded un zip it and load the tar in the AP slot in odin.
Occasionally a factory reset is needed for the device to boot and that will wipe your storage.
There are tons of tutorials on how to use odin...hit that search button, use Google or even hit you tube for videos (which are useful if your a total n00b since you can see how it runs so no surprises).
If you do it once after that it will seem so easy.
Sent from my S8 plus, Note 7, S7 Edge or S6
Click to expand...
Click to collapse
Peace...
Well.. I searched YouTube video tutorials, GooGle searched and went to SamFirmware and downloaded a 6.01 stock firmware. However, the file I downloaded was for Bangladesh (I have a 920G model) and it failed when trying to flash it via Odin. So I downloaded another 6.01 firmware--this time for Brazil (as all tutorials have stated that as long as the model number is the same its ok to flash). At first the green loading bar was working and it got all the way through to radio image and then it failed---but now my system has been wiped and now my phone is bricked. Do you or any other member know of a 920G 6.01 firmware that is compatible for the USA? It appears the radios are not compatible causing it to FAIL in flashing it in Odin.
Any assistance would be greatly appreciated.
ZEDEK said:
Peace...
Well.. I searched YouTube video tutorials, GooGle searched and went to SamFirmware and downloaded a 6.01 stock firmware. However, the file I downloaded was for Bangladesh (I have a 920G model) and it failed when trying to flash it via Odin. So I downloaded another 6.01 firmware--this time for Brazil (as all tutorials have stated that as long as the model number is the same its ok to flash). At first the green loading bar was working and it got all the way through to radio image and then it failed---but now my system has been wiped and now my phone is bricked. Do you or any other member know of a 920G 6.01 firmware that is compatible for the USA? It appears the radios are not compatible causing it to FAIL in flashing it in Odin.
Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
1)Did you try to put 4files firmware that comes with BL,AP,Modem,CL separately?
2)As You can get into download mode successfully kindly install samsung smartswitch on your phone>connect your device to pc while in download mode>open smartswitch>select emergency software recovery so that it will recognise your device as well as actual latest firmware for your device to be installed
3)If smartswitch doesn't help anymore, try with full firmware(4 files firmwate of any of Latin American countries as you stated for USA, may be the country's that lies near to you by region) but this time you need to uninstall smartswitch or Samsung kies in case installed as it could possibly mess up with Odin flashing
AssassinCreed said:
1)Did you try to put 4files firmware that comes with BL,AP,Modem,CL separately?
2)As You can get into download mode successfully kindly install samsung smartswitch on your phone>connect your device to pc while in download mode>open smartswitch>select emergency software recovery so that it will recognise your device as well as actual latest firmware for your device to be installed
3)If smartswitch doesn't help anymore, try with full firmware(4 files firmwate of any of Latin American countries as you stated for USA, may be the country's that lies near to you by region) but this time you need to uninstall smartswitch or Samsung kies in case installed as it could possibly mess up with Odin flashing
Click to expand...
Click to collapse
Peace AssassinsCreed...
Thank you for ur response. This is my first SamSung phone---I came from HTC and was familiar with their process of rooting and updating (which was a pain)--but I'm totally unfamiliar with Odin.
When you say put the files in separately---i'm not sure what you mean, cause when I extract the Update zip, I only get a a tar file---should I unzip in a folder?
Thanks again!!!
Use flash fire
Hello everyone, here is the latest G900AUCS4DQD1 full Odin update. With this, you may update from ANY version you currently have such as 4.4.4, 5.0, 5.1.1, or 6.0.1. Simply flash all 4 files after you extract using Odin and you will be on the latest and newest update. This WILL wipe your phone so make sure you backup your phone.
G900AUCS4DQD1 (6.0.1) - https://www.androidfilehost.com/?fid=529152257862725335
If for any reason you wish to downgrade, you can safely flash any of the following full Odin firmware's without any issue. Phone will hang after flashing on startup at AT&T logo. Simply boot into recovery and perform factory wipe/reset and it will boot up fine after that. After wiping data/resetting phone, it will look like it got stuck again on AT&T logo but give it a few minutes and it will eventually pass this time.
G900AUCS4DQC1 (6.0.1) - https://www.androidfilehost.com/?fid=745425885120723808
G900AUCS4DPH4 (6.0.1) - https://www.androidfilehost.com/?fid=312968873555011029
G900AUCS4CPA6 (5.1.1) - https://www.androidfilehost.com/?fid=24723757092307204
G900AUCU4COI5 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970945
G900AUCU4BOF3 (5.0) - https://www.androidfilehost.com/?fid=529152257862696776
Thank you again for the files, appreciated!
So, what am I doing incorrectly?
Used S5 900A on OI5
Downloaded the full Odin QC1 file.
flashed with Odin 3.11
No error messages, flashed all 4 files.
Got immediately dumped to recovery after an error screen saying the phone couldn't access knox.
Reboot, and the phone shows stuck on 5.1.1, with a baseband of QC1. It appears to be still the 5.1.1 software/ui.
tried a factory reset from recovery, no joy.
Currently downloading QD1 Odin file, I will report back.
edit: after a second full flash of all 4 files, it worked. wierd. Now running QC1. will updated to QD1 via odin shortly.
disregard this post in it's entirety. :silly:
and the QD1 Odin package flashed perfectly first time!
awesome work. thanks.
I just downloaded the 2.1Gb QD1 file, and the CRC check on the AP tar file says failed. Should I go ahead and flash my phone, is there any risk?
Downloaded the QD1 update without problems...now I wonder, how necessary is it ? since the phone is working fine.
blackhatchl said:
Downloaded the QD1 update without problems...now I wonder, how necessary is it ? since the phone is working fine.
Click to expand...
Click to collapse
That's funny, I've been thinking the same thing. I will admit battery life is really good as well, but I'm thinking the new battery and the factory data reset played a role as well. Haha...
Chuckles5150 said:
That's funny, I've been thinking the same thing. I will admit battery life is really good as well, but I'm thinking the new battery and the factory data reset played a role as well. Haha...
Click to expand...
Click to collapse
Installed flawlessly, I guess it's all about security that can't be seen nor noticed.
Many thanks to sharing.
Worked great! Dug the old s5 out of the bin, put this on, worked like a charm, thanks!
Trying to download but getting "failed network error" for every mirror link.
Edit: Nevermind. Found the thread that allowed me to root it from OF3 which I didn't know was possible. Went that route instead.
Can I use this file and method to update from my Galaxy S5 G900A running 4.4.2? My device in not rooted and the bootloader is locked. It is in it's original factory state.
No more update?
QE1 ?
It seems that Samsung will not be providing any further updates, so my question is, will AT&T release Noughat for Samsung Galaxy 5 G900A or is that pipe dream at this point? I didn't want to create a new thread for just this question.
Does this Update maintain root?
Thank you very much for this. After trying to root my device and failing, I couldn't get it back to normal. Hours of trying later and nothing worked, not even custom ROMs. I gave up and decided to go nuclear but still couldn't get it to work. Finally I found this, and it worked. Saved my bacon.
Guys,
I was on Android 4.4.2 which was the way the phone came. I jumped from 4.4.2 straight to this update, and installed it via Odin. No issues with the update, everything works fine.
However, There is a lot of free space on the ROM "missing", and I don't know where it is and how I can release it.
The phone is a 16gB model. What is available is 11.4 gB (the remaining probably being the firmware and OS), but of that 11.4gB, I only have about 7.5 gB to use. What gives? Is it because Odin made some kind of backup on the ROM itself? I really really would appreciate some information on this.
Thanks,
Mir
Oldies Gratitude...
Hi, I just thought you might like to know that thanks to your post and clear instructions (i.e. not assuming the reader has an encyclopedic knowledge of the S5...) I have been able to update my AT&T S5, here in the UK from Android 5 to marshmallow with everything going very smoothly. The reason I thought to write this little note is because I was born in 1947, which makes me 70 years old, and when I was growing up, the idea of a mobile phone was science fiction, so if I can do it...!
So Thank you again for sharing your expertise....
Plz upload new link with mediafire or any other, this link giving error and give message error binary md5...
waiting....
Regard
Ashiq Noor.
Dear File is corrupt when extract through winrar or 7zip give error The file is corrupt. plz provide another link.