[Q] stuck in boot loop - One (M7) Q&A, Help & Troubleshooting

General Details:
HTC One M7 Verizon, rooted, S-Off, TWRP 2.8.6.0
I had been running stock rom but rooted and got S-Off. Recently updated to TWRP 2.8.6.0. Still worked at this point.
Downloaded Android Revolution HD 91.1 and attempted install. Everything said it was successful, rebooted into a boot loop.
When it starts it vibrates (one short buzz) , then comes up to the initial HTC logo with the text at the bottom about it being a dev build, 31 seconds later, screen goes black, 4 seconds later this process starts over. I am able to use volume down + power buttons to get to the bootloader, then go into fastboot mode, load twrp recovery, etc.
Here's what I've tried so far:
Variations on wiping partitions, dalvik cache, everything, formating everything, etc.
Tried reinstalling the AR HD 91.1 zip, installed AR HD 84.0, installed AR HD 6.1 Google Edition, Installed Stock ROM from AR.
All to no avail. I'm downloading and installing android sdk now. Starting to think the issue is a firmware difference between what's on the phone and what ROM needs.
Here's what bootloader shows me:
*** UNLOCKED ***
M7_WLV PVT SHIP S-OFF RH
CID-VZW__001
HBOOT-1.57.0000
RADIO-1.13.41.0421
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Apr 22 2014, 18:03:29.22981
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
CHECK SMARTSD
IMAGE CRC
SHOW BARCODE
fastboot getvar all returns:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.13.41.0421
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXX
(bootloader) imei: 000000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4242mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
google search has been little help.
So...any thoughts?

Try reverting to an older version of TWRP. I had the same thing happen this morning and I just reverted now everything works fine.

muguly said:
Try reverting to an older version of TWRP. I had the same thing happen this morning and I just reverted now everything works fine.
Click to expand...
Click to collapse
Which version did you revert to? So far I've tried 2.7.1.1 and 2.7.0.1 to no avail.

archanoid said:
Which version did you revert to? So far I've tried 2.7.1.1 and 2.7.0.1 to no avail.
Click to expand...
Click to collapse
2.7.1.2

muguly said:
2.7.1.2
Click to expand...
Click to collapse
I installed 2.7.1.2 via fastboot flash recovery
then I tried re-installing the ARHD 91.1 ROM (which it said it did successfully) but the same problem continues.

archanoid said:
I installed 2.7.1.2 via fastboot flash recovery
then I tried re-installing the ARHD 91.1 ROM (which it said it did successfully) but the same problem continues.
Click to expand...
Click to collapse
Does ARHD supports the Verizon variant? And is your phone running the latest firmware?

alray said:
Does ARHD supports the Verizon variant? And is your phone running the latest firmware?
Click to expand...
Click to collapse
It's a specific ROM for the verizon variant so I'd say yes to the first question.
Now, I'm not 100% sure on this but I wasn't sure how to check the firmware version. I searched (googled) for how to tell and found a line saying the "version-main" line from a "fastboot getvar all" tells you the firmware version. When I issue a "fastboot getvar all" the version-main line is blank. Might that indicate I have no firmware on my phone?

archanoid said:
It's a specific ROM for the verizon variant so I'd say yes to the first question.
Now, I'm not 100% sure on this but I wasn't sure how to check the firmware version. I searched (googled) for how to tell and found a line saying the "version-main" line from a "fastboot getvar all" tells you the firmware version. When I issue a "fastboot getvar all" the version-main line is blank. Might that indicate I have no firmware on my phone?
Click to expand...
Click to collapse
version-main is sometime blank because of twrp, that doesn't mean you don't have a firmware.

alray said:
version-main is sometime blank because of twrp, that doesn't mean you don't have a firmware.
Click to expand...
Click to collapse
Okay so I just read a bunch about flashing firmwares. So I changed my CID to 11111111 and grabbed a custom 7.19.401.22 firmware from another thread here on xda, ran a fastboot oem rebootRUU (got the black screen with silver htc logo) then tried the fastboot flash zip firmware.zip and it gives me this every time:
FAILED (remote: 41 model id check fail)
Any pointers on figuring out what firmware I should be running for my phone?

archanoid said:
It's a specific ROM for the verizon variant so I'd say yes to the first question.
Click to expand...
Click to collapse
Can you give a link, not saying youre wrong, but I can't find this information, just to be sure. I thought ARHD was for M7_UL and M7_U only...
archanoid said:
Okay so I just read a bunch about flashing firmwares. So I changed my CID to 11111111 and grabbed a custom 7.19.401.22 firmware from another thread here on xda, ran a fastboot oem rebootRUU (got the black screen with silver htc logo) then tried the fastboot flash zip firmware.zip and it gives me this every time:
FAILED (remote: 41 model id check fail)
Click to expand...
Click to collapse
7.19.401.22 is WWE version for PN0712000 MID
Any pointers on figuring out what firmware I should be running for my phone?
Click to expand...
Click to collapse
If a specific firmware is required, it should be mentioned in the rom thread. My guess is that if your phone is Verizon and the rom is for Verizon then update to the latest verizon firmware. Meanwhile you could try to wipe everything from twrp + formate data. Reboot the recovery and push the rom to your phone and try to flash it again. Also worth trying another rom.

alray said:
Can you give a link, not saying youre wrong, but I can't find this information, just to be sure. I thought ARHD was for M7_UL and M7_U only...
Click to expand...
Click to collapse
I got it from here: http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
I thought I saw something that said it would work on verizon phone but I could be wrong about that. May have to pick a different ROM.
alray said:
...then update to the latest verizon firmware
Click to expand...
Click to collapse
I'm trying to do that now but having a hell of a time figuring out what firmware that is and where to get it.
(Thanks again for your help, btw)

archanoid said:
I got it from here: http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
I thought I saw something that said it would work on verizon phone but I could be wrong about that. May have to pick a different ROM.
I'm trying to do that now but having a hell of a time figuring out what firmware that is and where to get it.
(Thanks again for your help, btw)
Click to expand...
Click to collapse
You should try flashing a verizon rom from the verizon section

alray said:
You should try flashing a verizon rom from the verizon section
Click to expand...
Click to collapse
I just downloaded NuSenSeveN and am going to try it and see if it works. I'll let you know.

Lo and Behold!
Installing NuSenSeveN ROM worked. Guess ARHD doesn't like VZW phones. Sorry to have wasted anyone's time.

archanoid said:
Installing NuSenSeveN ROM worked. Guess ARHD doesn't like VZW phones. Sorry to have wasted anyone's time.
Click to expand...
Click to collapse
learning is not wasted time

True. Plus hopefully if anyone else makes the same mistake as me they'll find this thread and save themselves a lot of time/heartache figuring out what's up.
Thanks again for all help. This place is great.

Related

HELP Soft Bricked HTC One M7 (Sprint) S-ON, No OS, RUU Not Running

So I got my HTC one and rooted it immediately and Installed Cyanogenmod 11. I love Cyanogenmod but my SMS and MMS messages were all screwed up. I booted back up from my backup and noticed that It was running Android 4.3, 4.4 is available so I tried to install the update, It failed so I realized this must be because I was rooted so I went about going back to stock HTC Sense. I relocked the bootloader and ran RUU but the program crashed. After that I was only able to get to the fastboot page, recovery would crash. I ran a few different verisons of RUU but each one failed (error 155 being most prevalent). I unlocked my bootloader again and cyanogenmod started to boot up but never got through. I wipe data and cache. CM still won't boot. I reflashed the CWM recovery and tried to load the back up that I had. I get multiple errors about not being able to mount /system, /cache everything. I installed TWRP and tried to do sideload, not working. I have a USB OTG cable and I tried to load files that way, no good. I don't have S-Off and I can't boot into a rom so I can't get S-Off. I've exhausted google, not sure what to do now. Here is a breakdown.
*** Tampered ***
*** Unlocked ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-1.00.20.1108
OpenDSP-v32.120.274.0909
OS-3.05.651.6
eMMC-boot 2048MB
Jan 3 2014,13:35:00.0
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4082mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I've tried flashing a different firmware but I get the error
C:\Users\Administrator\Downloads\fastboot>fastboot flash zip firmware.zip
sending 'zip' (20935 KB)...
OKAY [ 2.090s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 2.340s
I've tried to run my exact version of RUU, found here.
http://forum.xda-developers.com/show....php?t=2576995
The Ruu window won't even open, I've run as administrator, in all sorts of compatibility modes. I've run it on my windows 8 pc, windows 7 pc and from mini-windowsXP. None of them could start.
Like I've said I've exhausted my resources. I appreciate any and all of the help I can get. Thank you!
-Brycery91
Brycery91 said:
The Ruu window won't even open, I've run as administrator, in all sorts of compatibility modes. I've run it on my windows 8 pc, windows 7 pc and from mini-windowsXP. None of them could start.
Like I've said I've exhausted my resources. I appreciate any and all of the help I can get. Thank you!
-Brycery91
Click to expand...
Click to collapse
Did you check the MD5 on the download?
Did you disable all security ( anti virus etc) on your PC.
Use Windows 7.
Did you relock your bootloader.
Sent from my HTC One using XDA Premium 4 mobile app
bored_stupid said:
Did you check the MD5 on the download?
Did you disable all security ( anti virus etc) on your PC.
Use Windows 7.
Did you relock your bootloader.
Click to expand...
Click to collapse
I Will check MD5 when I get back from work. I have all security disabled, not even firewall is enabled, I've used windows seven and I have relocked my boot loader. I was able to find an alternative version of The RUU I needed on the same thread I downloaded from. Here is the working link to the thread/download http://forum.xda-developers.com/showthread.php?t=2576995.
Brycery91 said:
I Will check MD5 when I get back from work. I have all security disabled, not even firewall is enabled, I've used windows seven and I have relocked my boot loader. I was able to find an alternative version of The RUU I needed on the same thread I downloaded from. Here is the working link to the thread/download http://forum.xda-developers.com/showthread.php?t=2576995.
Click to expand...
Click to collapse
That is official RUU, your BEST hope! http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe
Lock your bootloader, put the phone in bootloader mode where it says FASTBOOT USB on your phone screen and run the RUU package. IF It is NOT working, please post back with screenshot of the error!
SaHiLzZ said:
That is official RUU, your BEST hope! http://dl3.htc.com/application/RUU_..._NV_SPCS_4.38_003_release_348053_signed_2.exe
Lock your bootloader, put the phone in bootloader mode where it says FASTBOOT USB on your phone screen and run the RUU package. IF It is NOT working, please post back with screenshot of the error!
Click to expand...
Click to collapse
Ok i'm not sure if this is the same RUU from the thread I linked, but on the page 5, "Ph33zy" linked a working exe. I ran that and it went through! What a relief! My phone is running again! Thanks everyone for your help! I worked on this for hours and I feel so embarrassed cause I feel like a noob!
Glad your up and running again.
Sent from my HTC One using XDA Premium 4 mobile app
I was in the same place... searching around whole world, coming back hopeless.. then sent it back to HTC... they used like 1 sec to restore it...
Brycery91 said:
Ok i'm not sure if this is the same RUU from the thread I linked, but on the page 5, "Ph33zy" linked a working exe. I ran that and it went through! What a relief! My phone is running again! Thanks everyone for your help! I worked on this for hours and I feel so embarrassed cause I feel like a noob!
Click to expand...
Click to collapse
That's great. Thanks for posting back!
Glad it worked out! You might want to remove the serial number and meid from your original post though.
hi the same thing is going on
but my gets stuck on the htc logo and doesnt send the info. can help please
dd323 said:
but my gets stuck on the htc logo and doesnt send the info. can help please
Click to expand...
Click to collapse
Mine would do the same thing eventually I would get an error on the PC. When I finally found a RUU that matched my exact system "version-main: 3.05.651.6" It ran very smoothly. Make sure the RUU you have on matches your version number that is shown when you boot to bootloader.
dd323 said:
but my gets stuck on the htc logo and doesnt send the info. can help please
Click to expand...
Click to collapse
Mine would do the same thing eventually I would get an error on the PC. When I finally found a RUU that matched my exact system "version-main: 3.05.651.6" It ran very smoothly. Make sure the RUU you have on matches your version number that is shown when you boot to bootloader.
Brycery91 said:
Mine would do the same thing eventually I would get an error on the PC. When I finally found a RUU that matched my exact system "version-main: 3.05.651.6" It ran very smoothly. Make sure the RUU you have on matches your version number that is shown when you boot to bootloader.
Click to expand...
Click to collapse
my phone doesnt even show no numbers . my phone has no os
dd323 said:
my phone doesnt even show no numbers . my phone has no os
Click to expand...
Click to collapse
How did you get it to have no OS? If the phone is off and you first hold down the volume down button then the power button (keep them pressed till the screen lights up). Make sure that you've also had it charged.
HELP
Brycery91 said:
I Will check MD5 when I get back from work. I have all security disabled, not even firewall is enabled, I've used windows seven and I have relocked my boot loader. I was able to find an alternative version of The RUU I needed on the same thread I downloaded from. Here is the working link to the thread/download http://forum.xda-developers.com/showthread.php?t=2576995.
Click to expand...
Click to collapse
This one is not working with mine Sprint HTC ONE my HBOOT is 1.57.0000 can you plz help with this my one in S-ON ...
i need help, :/ i've the same problem
*** TEMPERED ***
*** UNLOCKED***
M7_WLS PVT SHIP S-ON RH
WBOOT-1.44.0000
RADIO-100.20.0626
OpenDsP-v31.120.274.0617
eMMC-boot
Jul 5 2013,17:19;22:-1
i try update TWRP but i cant. i have TWRP v2.6.3.0
when i try install a ROM, i get an error :/ or for example i installed TN_Sense6, when i configure my language, my HTC restarts it, again and again to beginning :c
Help help help soft brick no os no baseband
I have a sprint htc one M7 I just got my replacement phone today and i rooted it and got every thing restored on it then there was a problem with the speakers on the phone it would play music but only on the right side .....(i forgot to mention i installed renovate rom after i rooted it) so i figured if i installed another kernal it would fix it so i installed kangaroo kernal for SPRINT HTC ONE android version 4.4.2 which was the right kernal for my phone ..so i thought... so when i installed it ..it took a while for it to turn on and i knew something was wrong when it turned on the home screen wouldn't load and it was showing i had no service when i was in a area i clearly new i had service in so i tried to run a RUU and i keep getting a USB error when it tries to send the ruu . I know the cable works and when i ran fastboot getvar all there is no baseband and no os .........HELP SUPER URGENT URGENT MY parents are going to kill me cause i just got my replacment.... my hboot is 1.57 PLEASE HELP QUICK.:crying::crying::crying::crying::crying::crying:
soft bricked
I wanted to unroot my htc one m7, I tried to s-off,but on a wrong move,I wiped my phone.
now I have just bootloader and TWRP.
I tried flashing ROMs using OTG but gave me errors and didnt flash.
I dont know what should I do.
please help me.
I`m still S-ON
my getvar all:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000 INFOversion-baseband: 4T.29.3218.08
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.09.401.5 INFOversion-misc: PVT SHIP S-ON INFOserialno: HT485W9**
INFOimei: 354***
INFOmeid: 00000000000000 INFOproduct: m7ul
INFOplatform: HBOOT-8064 INFOmodelid: PN0710000
INFOcidnum: HTC_J15
INFObattery-status: good
INFObattery-voltage: 3832mV INFOpartition-layout: Generic INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader:dirty-6d8a0b9b
INFOhbootpreupdate: 11 INFOgencheckpt: 0
all: Done!
mojtabaghanidel said:
I wanted to unroot my htc one m7, I tried to s-off,but on a wrong move,I wiped my phone.
now I have just bootloader and TWRP.
I tried flashing ROMs using OTG but gave me errors and didnt flash.
I dont know what should I do.
please help me.
I`m still S-ON
my getvar all:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000 INFOversion-baseband: 4T.29.3218.08
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.09.401.5 INFOversion-misc: PVT SHIP S-ON INFOserialno: HT485W9**
INFOimei: 354***
INFOmeid: 00000000000000 INFOproduct: m7ul
INFOplatform: HBOOT-8064 INFOmodelid: PN0710000
INFOcidnum: HTC_J15
INFObattery-status: good
INFObattery-voltage: 3832mV INFOpartition-layout: Generic INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader:dirty-6d8a0b9b
INFOhbootpreupdate: 11 INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
what rom version have you tried to flash? What twrp version are you using? Do you want to restore your stock rom or you want to install a custom one?
reply
alray said:
what rom version have you tried to flash? What twrp version are you using? Do you want to restore your stock rom or you want to install a custom one?
Click to expand...
Click to collapse
I have flashed TWRP 2.8.1.0 (latest version)
I am S-ON
I tried to unroot my phone and firewater told me that my kernel contains anti-firewater files.
so i decieded to flash ARHD, while flashing, I wiped my phone and after that I couldnt flash any ROMs. ( ARHD and a ROM that HTC has sent for me)
I want to flash HTC sense rom and return to stock.
thanks

Bad flash, now I can't call/SMS. Need to back to stock.

Hey there, I flashed a ROM and apparently it messed up my M7 Sprint I can't call or receive SMS, also I can't install apps even from OTG cable, I think this ROM is broken. Not sure if this is a hardware or software issue, I hope it's the latter. I can use the camera, WI-FI and play media files.
I have HBOOT 1.44 and my bootloader says TAMPERED and UNLOCKED.
How can I get back to stock from this stage? I'm super noob every bit of help will be appreciated
Dani84 said:
Hey there, I flashed a ROM and apparently it messed up my M7 Sprint I can't call or receive SMS, also I can't install apps even from OTG cable, I think this ROM is broken. Not sure if this is a hardware or software issue, I hope it's the latter. I can use the camera, WI-FI and play media files.
I have HBOOT 1.44 and my bootloader says TAMPERED and UNLOCKED.
How can I get back to stock from this stage? I'm super noob every bit of help will be appreciated
Click to expand...
Click to collapse
Ok so sounds like your having a rough time. I will try my best for you .
First of all some more information please. Boot you phone into the bootloader and connect fastbootusb. Then in your Fastboot command line type.
Code:
fastboot getvar all
And post the output here. Please edit out your serial no. And imei no.
what Rom did you flash and which recovery are you using? Did you clean flash i.e perform a full wipe before flashing, or Dirty flash i.e flash the Rom without wiping anything?
If the phones booting it can't of done anything to serious so let's hope this is an easy fix
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
uhm nothing, seems adb/fastboot is not working.
Im using Ubuntu 14.04... 64 bit.
p.s. in Windows 8.1 i connected it through this (Nocturnal ADB tool):
http://forum.xda-developers.com/showthread.php?t=2646453
I open the CMD and type adb devices and there it is HT35xxxxxxx. But when I type fastboot getvar all, it says waiting for device and is stuck there for 5+ minutes and nothing.
Dani84 said:
uhm nothing, seems adb/fastboot is not working.
Im using Ubuntu 14.04... 64 bit.
p.s. in Windows 8.1 i connected it through this (Nocturnal ADB tool):
http://forum.xda-developers.com/showthread.php?t=2646453
I open the CMD and type adb devices and there it is HT35xxxxxxx. But when I type fastboot getvar all, it says waiting for device and is stuck there for 5+ minutes and nothing.
Click to expand...
Click to collapse
Ah hA a Linux user nice to use Fastboot in linux all command must start sudo. So
sudo fastboot devices
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
Ah hA a Linux user nice to use Fastboot in linux all command must start sudo. So
sudo fastboot devices
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
Oh true!!! :victory:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3xxxxxx
(bootloader) imei: 35xxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.042s
Dani84 said:
Oh true!!! :victory:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3xxxxxx
(bootloader) imei: 35xxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Value too large for defined data type))
finished. total time: 5.042s
Click to expand...
Click to collapse
Your phone does not appear to be a Sprint m7. As they have product I'd m7wls
Yours has m7_ul so it is international version. If you flashed a Sprint Rom that would certainly explain your problem. Luckily your s-on so shouldn't have done to much damage.
What Rom did you flash and which recovery are you using?
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
my recovery is TWRP 2.7.1.1
and the ROM is LiquidSmooth but it is horrible LOL and I can't flash new ROMs apparently.
how do I know if my ONE is sprint or at&t? I always assumed it was sprint as Im from Spain.
Dani84 said:
my recovery is TWRP 2.7.1.1
and the ROM is LiquidSmooth but it is horrible LOL and I can't flash new ROMs apparently.
how do I know if my ONE is sprint or at&t? I always assumed it was sprint as Im from Spain.
Click to expand...
Click to collapse
your phone is not Sprint or AT&T
you have
product: m7_ul <- this is a GSM with LTE
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP304 <- this says it's from Vodafone
So your looking for a RUU with VODAP in the CID ... all I see are some OTA files seems theirs no RUU
Dani84 said:
my recovery is TWRP 2.7.1.1
and the ROM is LiquidSmooth but it is horrible LOL and I can't flash new ROMs apparently.
how do I know if my ONE is sprint or at&t? I always assumed it was sprint as Im from Spain.
Click to expand...
Click to collapse
Your firmware also appears to be very old there is a reset zip i think will do the trick.
http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
This reset zip should return you to stock so you take ota updates, then you can update to official kitkat Rom and firmware.
Reroot the phone and install a international based Rom. Stay away from TWRP 2.7.1.1 though you'll notice in your getvar version main is blank. That's caused by TWRP 2.7.1.1. Stick with TWRP 2.6.3.3 to avoid this happening again.
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
Your firmware also appears to be very old there is a reset zip i think will do the trick.
Link to follow
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
k thanks so what to do? what link?
Dani84 said:
k thanks so what to do? what link?
Click to expand...
Click to collapse
See my edited post above
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
See my edited post above
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
downloading time = 2hours LOL, no problem I have time.
so I can flash that even when bootloader says TAMPERED and UNLOCKED? i want to be sure im not bricking my phone haha.
Dani84 said:
downloading time = 2hours LOL, no problem I have time.
so I can flash that even when bootloader says TAMPERED and UNLOCKED? i want to be sure im not bricking my phone haha.
Click to expand...
Click to collapse
Yes just flashes like a normal Rom from TWRP recovery, it will replace your custom recovery with stock and your Rom.
I think your firmware is probably still older than this reset.zip though. I'm not sure if that will cause a problem.
So you could also download this OTA extract the firmware from it and flash it manually to bring your firmware in line with the reset.zip
http://www.htc1guru.com/dld/ota_m7_..._p_release_325133_signedlqk8p6c09r7kmir2-zip/
That will require relocking the bootloader though but you can always unlock again after.
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Dani84 said:
downloading time = 2hours LOL, no problem I have time.
so I can flash that even when bootloader says TAMPERED and UNLOCKED? i want to be sure im not bricking my phone haha.
Click to expand...
Click to collapse
yeah the Guru_Reset requires unlocked bootloader and TWRP 2.6.3.3 custom recovery.
To take the over the air updates it's Important that you choose to install
stock recovery and say no to root in the guru reset Aroma installer.
Good luck !!
Thanks guys, both of you have been very kind and helpful I will try this and tell you tomorrow (its night in Spain).
@clsA do you know about the firmware will he need to update it to match the reset or will it still update ok as is ?
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Danny201281 said:
@clsA do you know about the firmware will he need to update it to match the reset or will it still update ok as is ?
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
Click to expand...
Click to collapse
The firmware may indeed need updated but I'm not positive
Dani84 said:
Thanks guys, both of you have been very kind and helpful I will try this and tell you tomorrow (its night in Spain).
Click to expand...
Click to collapse
clsA said:
The firmware may indeed need updated but I'm not positive
Click to expand...
Click to collapse
Probably best to do it then in that case, better safe than sorry thanks.
Ok so hopefully this will tell you everything you need.
Download the ota file as well. Then open it on your pc and extract the firmware.zip from it and place it in your Fastboot folder. Then follow this small guide I put together.
Ok so the plan is to upgrade your software to complete Stock 2.24.161.1, Rom, recovery and firmware will all be on the same os version and unmolested stock condition. After which you will be able to update you phone with official ota updates.
Prepare the files, your pc and phone for the procedure. Rename the 2.24.161.1.zip to firmware.zip and place it in your Fastboot folder on your pc. Connect your phone to mass storage with usb and copy the reset.zip to your internal storage/sdcard.
Ok let's get started. Reboot your phone into recovery. And flash the reset.zip just like installing a custom Rom. Select install and choose the reset.zip. Once it's done your Rom, recovery and radio will be back to stock. (if you choose to install the radio, it's optional at this stage as it will be done with the firmware anyway.
Now we need to upgrade the firmware since the OTA update will expect to find version 2.24.161.1 but your firmware is older than that so the OTA may fail to install.
Reboot the phone to the bootloader and Connect fastbootusb. Now open your Fastboot command line and type
Code:
fastboot erase cache
Code:
fastboot oem lock
Code:
fastboot reboot-bootloader
Code:
fastboot oem rebootRUU
<--- case sensitive.
The phone will reboot to a black screen with a Silver HTC LOGO. This is RUU mode. Now we're going to flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash will be short. It's just a preupdate preparing the hboot for the new firmware. So we need to do the same command again.
Code:
fastboot flash zip firmware.zip
The second flash will take a little longer and this time it will flash the full firmware. The progress bar on the phone screen will not reach 100% this is normal as long as the command window has completed its output the flash is done.
Code:
fastboot reboot-bootloader
You should now see your new firmware version 2.24.161.1 in the bootloader. And that's it
Reboot the phone and complete the Rom setup. You should start getting notifications for OTA updates almost immediately. If not just go to settings>about and check for updates to force it. Take all the OTA's up to the latest and you're done
Completely stock software. If you decide to reroot make a nandroid of the Stock Rom before you root it. And copy it to your pc. This way you can return to stock easily for future OTA updates
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk
It worked!!!!!!
Now im running my stock HTC One again. Such a lame Vodafone ROM with tons of bloatware but at least the phone is alive and Im happy with that.
tbh Im now scared of flashing a new ROM, i would like the android revolution or one of those flashy roms but I think im gonna wait some days before making a decission lol. Thanks everyone
Dani84 said:
It worked!!!!!!
Now im running my stock HTC One again. Such a lame Vodafone ROM with tons of bloatware but at least the phone is alive and Im happy with that.
tbh Im now scared of flashing a new ROM, i would like the android revolution or one of those flashy roms but I think im gonna wait some days before making a decission lol. Thanks everyone
Click to expand...
Click to collapse
Well done m8, glad you got it sorted. You shouldn't be scared of flashing a new Rom though. The only thing that went wrong last time was you flashed a Rom for a different version of the M7.
As long as you stick with m7_ul roms you'll be fine but it's understandable you would want to take some time to process what happened. It's never fun thinking you bricked an expensive device such as the HTC one.
If you ever decide you want to try a Rom feel free to pm me for some guidance. For now relax and enjoy your working phone :highfive:
---------- Post added at 05:22 PM ---------- Previous post was at 05:01 PM ----------
@Dani84 Hi m8 just seen your PM. Yeah ARHD is a good place to start, it's quite close to stock but with xposed support and sense 6 toolbox.
Very smooth reliable Rom with no major bugs that I know of. I've been using ARHD since version 43 and I just love it. Version 80.0 is on the Horizon (Android 4.4.3).
I think I warned you already about twrp but just incase make sure to flash twrp 2.6.3.3 to preserve your os information.
Download the Rom and drop it on your sd card. Reboot to recovery and flash the Rom from the install menu in twrp. Make sure to do a full data wipe in the aroma installer as your changing from stock to custom Rom.
Sent from my HTC One M7 ARHD 71.1 (Minus Purple tint) using TapaTalk

[Q] Unable to go STOCK or flash other ROMs, adb shows device as offline

Hello xda members.
I'm having some trouble with my device, I did search around this past week but still didnt success in fixing it, hope someone can point me in the right direction.
So I was S-ON with 4.3 - 4.4 on ViperOne for a long time, most of the things worked fine but my 3G was a bit slow/disconnected from time to time.
I though giving a shot to a Lollipop version Sky Dragon. I downloaded and installed Sky Dragon and used it fine for some months, but then when I wanted to use Android Studio for a project my device was not recognized. I manually run adb devices and it would not show my device (debuggin on), tried some search on google but without success.
I though moving back to ViperOne / ARHD (I really missed SENSE) would solve my problem, so downloaded the rom and tried to install but it would always stuck in "formatting partition" process.
I manually put my device in fastboot and run getvar all which resulted in BLANK version-main, very strange.
I did some search but had only few similar cases, I tried to go to STOCK by re-lockocking bootloader, flashing stock firmware but the RUU.exe would always stop at 5% and show "fastboot_htc.exe has stopped working", again did some research but could not find a solution.
When I try to flash custom firmware through fastboot flash zip I will always get "(bootloader) Read zipped android_info fail FAILED (remote: 99 unknown fail)".
I then found a tool to write a version-main into the emmc and after flashing it in TWRP I got a 1.00.000.0 version-main. Tried all of above again with the same results. My device will be recognised as "offline" in adb devices.
Luckily I have some backups (viperone 4.3 and skydragon) that work fine except that I cant update and cant connect via adb.
I have outputted my getvar all, let me know if you need further info for my case.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.0
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxx
(bootloader) imei: xxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3976mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
What can you suggest me?
Thanks a lot guys, and sorry for the long story!
mindxpert said:
Hello xda members.
I'm having some trouble with my device, I did search around this past week but still didnt success in fixing it, hope someone can point me in the right direction.
So I was S-ON with 4.3 - 4.4 on ViperOne for a long time, most of the things worked fine but my 3G was a bit slow/disconnected from time to time.
I though giving a shot to a Lollipop version Sky Dragon. I downloaded and installed Sky Dragon and used it fine for some months, but then when I wanted to use Android Studio for a project my device was not recognized. I manually run adb devices and it would not show my device (debuggin on), tried some search on google but without success.
Click to expand...
Click to collapse
Update your driver to latest HTC drivers
Update you android SDK to latest version
I though moving back to ViperOne / ARHD (I really missed SENSE) would solve my problem, so downloaded the rom and tried to install but it would always stuck in "formatting partition" process.
Click to expand...
Click to collapse
What recovery version is installed on the phone?
I manually put my device in fastboot and run getvar all which resulted in BLANK version-main, very strange.
Click to expand...
Click to collapse
Not really, its a normal issue everyone get when using some twrp versions.
I did some search but had only few similar cases, I tried to go to STOCK by re-lockocking bootloader, flashing stock firmware but the RUU.exe would always stop at 5% and show "fastboot_htc.exe has stopped working", again did some research but could not find a solution.
Click to expand...
Click to collapse
Make sure to uninstall HTC Sync from your computer. Keep the drivers installed but uninstall HTC Sync. You are not giving any info about what ruu you are trying to flash but afaik, there is none you can use for this phone with s-on.
When I try to flash custom firmware through fastboot flash zip I will always get "(bootloader) Read zipped android_info fail FAILED (remote: 99 unknown fail)".
Click to expand...
Click to collapse
You can not flash custom firmware when S-ON...
I then found a tool to write a version-main into the emmc and after flashing it in TWRP I got a 1.00.000.0 version-main. Tried all of above again with the same results. My device will be recognised as "offline" in adb devices.
Click to expand...
Click to collapse
Having the version-main blank is not an issue preventing your phone to work properly, its only an aesthetic issue. The version-main can be restored by flashed the stock firmware back.
alray said:
Update your driver to latest HTC drivers
Update you android SDK to latest version
Click to expand...
Click to collapse
Already have the latest SDK version.
alray said:
What recovery version is installed on the phone?
Click to expand...
Click to collapse
I'm using TWRP 2.8.5.0
alray said:
Make sure to uninstall HTC Sync from your computer. Keep the drivers installed but uninstall HTC Sync. You are not giving any info about what ruu you are trying to flash but afaik, there is none you can use for this phone with s-on.
Click to expand...
Click to collapse
I found from my CID that this might be compatible RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
alray said:
You can not flash custom firmware when S-ON...
Click to expand...
Click to collapse
So should I go S-OFF before? I'm not sure if I can downgrade and S-OFF in the current condition.
alray said:
Having the version-main blank is not an issue preventing your phone to work properly, its only an aesthetic issue. The version-main can be restored by flashed the stock firmware back.
Click to expand...
Click to collapse
Thank you for the clarification
mindxpert said:
Already have the latest SDK version.
Click to expand...
Click to collapse
And latest HTC drivers? Your phone should be visible from "my computer" when booted in twrp 2.8.5.0 cause twrp now have mtp support.
Code:
I found from my CID that this might be compatible RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
Not with s-on. 4.19.631.9 is a downgrade, you need s-off to downgrade.
So should I go S-OFF before? I'm not sure if I can downgrade and S-OFF in the current condition.
Click to expand...
Click to collapse
You can go s-off using sunshine s-off but it cost 25$ or you can flash other roms by fixing your adb issues.
alray said:
And latest HTC drivers? Your phone should be visible from "my computer" when booted in twrp 2.8.5.0 cause twrp now have mtp support.
Click to expand...
Click to collapse
Yes my device is visible when in recovery.
alray said:
I found from my CID that this might be compatible RUU_M7_UL_K44_SENSE55_MR_Rogers_WWE_4.19.631.9_Radio_4A.23.3263.28_10.38r.1157.04L_release_351317_signed_2.exe
Not with s-on. 4.19.631.9 is a downgrade, you need s-off to downgrade.
You can go s-off using sunshine s-off but it cost 25$ or you can flash other roms by fixing your adb issues.
Click to expand...
Click to collapse
I used sunshine to s-off my device. Currently downloading files from your signature post which had a case with my CID and MID to return stock then update firmware/rom,
Thanks, will report back tomorrow.

[Q] M7 softbrick (or not?) - help needed!

Hi guys!
I've been trying to get my dear One M7 alive now for 4-5 evenings. Really thought it was bricked for good, but finally made some progress. Here's what happened:
S-OFF, rooted since always but on stock/OTA from HTC. Been updating through OTAs just flashing back stock recovery before update and then switching back. I've been using CWM. I was already on the Lollipop 5.0.2 with Sense 6.0 (sofware revision 7.19.401.2) but received another minor OTA couple of weeks ago. Didn't make note of the new revision, nor the reason for the update but just followed my usual steps. Everything seemed to go as usual, but once booting back up after the update the phone got stock on the boot animation (the htc one w/beats audio just after the sound).
Immediately tried a restore from a backup I have, but continued in the same situation. Tried several/different wipes (even the data partition in the end), but no luck. Tried the best I could to search for info, but all I could find was what I'd already done. Tried to download some RUU's but the files seems corrupted and I cannot get it working. I tried to switch to TWRP, taking a new backup (of my restored, but still not working CWM-backup). Same situation. Then I tried to flash a Cyanogenmod version, and was close to giving up when it didn't work as well. Luckily I tried a couple of times more (perhaps after throwing the phone in the wall a few times) and just out of nowhere it suddenly booted and seems to be working normally. Full of hope I tried a restore again, but back to boot animation. Tried to download a clean stock install file I found on XDA with the same version as mine, but just get stuck again. Once I restore the Cyanogenmod backup, it boots perfectly.
Perhaps I am missing something obvious, but I've been doing these things for many years know (starting with the Desire @ nikez), and this just seems odd. I could seriously need some help to get it back working again as I like the stock Sense 6.0 with Lollipop.
For info some details (btw; I verified it against the data I noted just after my original Lollipop OTA early this year, and it is still identical, so i don't see any vitals have changed):
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: **removed**
(bootloader) imei: **removed**
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4081mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks in advance for any good advice!!
tormagj said:
I was already on the Lollipop 5.0.2 with Sense 6.0 (sofware revision 7.19.401.2) but received another minor OTA couple of weeks ago. Didn't make note of the new revision
Click to expand...
Click to collapse
Its 7.19.401.22
nor the reason for the update
Click to expand...
Click to collapse
bug fixes
but just followed my usual steps.
Click to expand...
Click to collapse
Won't work for this ota, you must be 100% stock.
Thanks in advance for any good advice!![
Click to expand...
Click to collapse
flash the 7.19.401.22 ruu, it will update and fix your phone.
http://forum.xda-developers.com/showpost.php?p=59436794&postcount=2
alray said:
Its 7.19.401.22
flash the 7.19.401.22 ruu, it will update and fix your phone.
http://forum.xda-developers.com/showpost.php?p=59436794&postcount=2
Click to expand...
Click to collapse
Thanks alot alray, I'll test it and report back if I manage to fix my beloved phone. I guess I didn't see that "second generation" in post two
unbricked htc one m7
tormagj said:
Hi guys!
I've been trying to get my dear One M7 alive now for 4-5 evenings. Really thought it was bricked for good, but finally made some progress. Here's what happened:
S-OFF, rooted since always but on stock/OTA from HTC. Been updating through OTAs just flashing back stock recovery before update and then switching back. I've been using CWM. I was already on the Lollipop 5.0.2 with Sense 6.0 (sofware revision 7.19.401.2) but received another minor OTA couple of weeks ago. Didn't make note of the new revision, nor the reason for the update but just followed my usual steps. Everything seemed to go as usual, but once booting back up after the update the phone got stock on the boot animation (the htc one w/beats audio just after the sound).
Immediately tried a restore from a backup I have, but continued in the same situation. Tried several/different wipes (even the data partition in the end), but no luck. Tried the best I could to search for info, but all I could find was what I'd already done. Tried to download some RUU's but the files seems corrupted and I cannot get it working. I tried to switch to TWRP, taking a new backup (of my restored, but still not working CWM-backup). Same situation. Then I tried to flash a Cyanogenmod version, and was close to giving up when it didn't work as well. Luckily I tried a couple of times more (perhaps after throwing the phone in the wall a few times) and just out of nowhere it suddenly booted and seems to be working normally. Full of hope I tried a restore again, but back to boot animation. Tried to download a clean stock install file I found on XDA with the same version as mine, but just get stuck again. Once I restore the Cyanogenmod backup, it boots perfectly.
Perhaps I am missing something obvious, but I've been doing these things for many years know (starting with the Desire @ nikez), and this just seems odd. I could seriously need some help to get it back working again as I like the stock Sense 6.0 with Lollipop.
For info some details (btw; I verified it against the data I noted just after my original Lollipop OTA early this year, and it is still identical, so i don't see any vitals have changed):
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: **removed**
(bootloader) imei: **removed**
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4081mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
**************************************************************************************************
hello sir,
I have htc one m7 sprint manufactured in new zealand.The problem started when I by mistake deleted all the partitions like delvin cache,system,internal
storage,etc in the factory reset option of the bootloader.My phone has unlocked bootloader and latest twrp installed before the problem occurred and android
version 4.2 installed which i think has been deleted as it says when rebooting from the bootloader and it rebooted normally just stucks at hTC logo.
I have installed fastboot,adb(not working properly) by sdk tools on windows 7 32 bit pc and also htc sync manager and latest java.
I request you to reply me as soon as possible as i have just lost my all the patience doing all the methods suggested on the like fastboot,etc and
typing the commands.You are my last hope,please help me.
Htc one bootloader details are:
*** TAMPERED ***
*** UNLOCKED ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-1.00.20.0315
OpenDSP-v26.120.274.020
eMMC-boot
May 8 2013,16:30:08:1
I have only basic knowledge of android tools and computer.
Thanks a lot for your time and i am waiting for your reply.
Click to expand...
Click to collapse
tormagj said:
Thanks alot alray, I'll test it and report back if I manage to fix my beloved phone. I guess I didn't see that "second generation" in post two
Click to expand...
Click to collapse
@alray - that freaking worked like a charm! Thanks a lot, a donation is on it's way, really thought my beloved phone was gone.
Installed the RUU version 7.19.401.22 as indicated, and that did the trick. I got an error message about HBOOT while flashing it, tried it twice since I saw it mentioned in several threads but the message continued. However, the phone booted normally afterwards so I couldn't care less right now
Code:
FAIL90 hboot pre-update! please flush image again immediately
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
For "hboot-preupdate" response, restart the same procedure for device XXXX.
Also tried desperately to restore the data partition from my cwm backup, but then the phone wouldn't boot again. Last resort now will be to manually restore some of the apps through Titanium from my cwm - but what the heck, lost data is better than lost phone.
Although a minor update, seems like HTC did some serious changes since a lot of the normal stuff doesn't work. Any idea of what??
Anyways, thanks again - really appreciated!
rakeshrinawa said:
hello sir,
I have htc one m7 sprint manufactured in new zealand.The problem started when I by mistake deleted all the partitions like delvin cache,system,internal
storage,etc in the factory reset option of the bootloader.My phone has unlocked bootloader and latest twrp installed before the problem occurred and android
version 4.2 installed which i think has been deleted as it says when rebooting from the bootloader and it rebooted normally just stucks at hTC logo.
I have installed fastboot,adb(not working properly) by sdk tools on windows 7 32 bit pc and also htc sync manager and latest java.
I request you to reply me as soon as possible as i have just lost my all the patience doing all the methods suggested on the like fastboot,etc and
typing the commands.You are my last hope,please help me.
Htc one bootloader details are:
*** TAMPERED ***
*** UNLOCKED ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-1.00.20.0315
OpenDSP-v26.120.274.020
eMMC-boot
May 8 2013,16:30:08:1
I have only basic knowledge of android tools and computer.
Thanks a lot for your time and i am waiting for your reply.
Click to expand...
Click to collapse
Hi @rakeshrinawa,
I should probably leave it to the pro's to help you out, but I would suggest the following (sure somebody will correct me if I'm on thin ice here):
- Boot into fastboot, open a command prompt and write "fastboot getvar all". Then you'll see the same variables that I posted above, amongst other the version of your software, your CID and some other information that might be useful for the guys helping.
- Look at the selection posted by @alray here http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 (either first or second post).
- You need to find the RUU that fits your phone (correct CID and version), and keep in mind the note in the top:
When you update you must go one step at a time. For example if you are on 6.xx.xxx.xx then you can flash 7.xx.xxx.xx . But if you are on 5.xx.xxx.xx then you cannot flash the 7.xx.xxx.xx you must first flash a 6..xx.xxx.xx.
Click to expand...
Click to collapse
- The trick is to find the right file, but I'm not the right guy to tell you which one. Once you have it, just follow the "How to flash" instructions step by step and hopefully you'll have an almost new phone again just like I had.
- I see your S-ON, so take note of the instructions saying you need to relock the bootloader (item 4 in How to flash). Or perhaps you could just as well S-OFF it ​
I am sure it's possible to solve your issue, keep on trying! Good luck!
rakeshrinawa said:
hello sir,
I have htc one m7 sprint manufactured in new zealand.The problem started when I by mistake deleted all the partitions like delvin cache,system,internal
storage,etc in the factory reset option of the bootloader.My phone has unlocked bootloader and latest twrp installed before the problem occurred and android
version 4.2 installed which i think has been deleted as it says when rebooting from the bootloader and it rebooted normally just stucks at hTC logo.
I have installed fastboot,adb(not working properly) by sdk tools on windows 7 32 bit pc and also htc sync manager and latest java.
I request you to reply me as soon as possible as i have just lost my all the patience doing all the methods suggested on the like fastboot,etc and
typing the commands.You are my last hope,please help me.
Htc one bootloader details are:
*** TAMPERED ***
*** UNLOCKED ***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-1.00.20.0315
OpenDSP-v26.120.274.020
eMMC-boot
May 8 2013,16:30:08:1
I have only basic knowledge of android tools and computer.
Thanks a lot for your time and i am waiting for your reply.
Click to expand...
Click to collapse
Relock your bootloader
Code:
fastboot oem lock
and flash the old sprint ruu:
Code:
fastboot oem rebootRUU
fastboot flash zip ruu_m7_wls_jb_50_sprint_1.29.651.10.zip
fastboot flash zip ruu_m7_wls_jb_50_sprint_1.29.651.10.zip
fastboot reboot
Then you should update your phone to latest version before unlocking the bootloader, flashing a custom recovery/rom (if you are planning to)
thanks for your reply dear
@alray
Actually this is the only info my bootloader is showing as I have formatted data in the factory reset option.The model no of the phone is PN072(SPRINT) and before this problem,ANdroid 4.2 was installed and now i have installed TWRP 2.6.3.0 and again formatted data and now adb sideload is not working,kindly suggest me the correct softwares which can make my htc one m7 work and do my normal things and can u send me step by step list of softwares to be installed like twrp and adb on my pc as i have 32bit windows 7 on my pc.
Thanks a lot for your reply dear friend and you guys are just amazingly helpful.Keep it on.
---------- Post added at 02:20 AM ---------- Previous post was at 02:07 AM ----------
[/COLOR @alray
I think i have the wrong version of twrp on my phone so adb sideload is not working and i just download your files and simply flash them and will they make my phone work even when i have performed format data and by factory reset in the bootloader?
rakeshrinawa said:
@alray
Actually this is the only info my bootloader is showing as I have formatted data in the factory reset option.The model no of the phone is PN072(SPRINT) and before this problem,ANdroid 4.2 was installed and now i have installed TWRP 2.6.3.0 and again formatted data and now adb sideload is not working,kindly suggest me the correct softwares which can make my htc one m7 work and do my normal things and can u send me step by step list of softwares to be installed like twrp and adb on my pc as i have 32bit windows 7 on my pc.
Thanks a lot for your reply dear friend and you guys are just amazingly helpful.Keep it on.
Click to expand...
Click to collapse
Step you need to do posted above
RUU also posted above
you'll also need adb / fastboot either by downloading the android sdk (SDK Tools only) or minimal adb and fastboot
Save the ruu in the same folder you have installed minimal adb and fastboot or if installed the android sdk, make sure the ruu is in \Android SDK Tools\platform-tools.
Start a command prompt: Start menu --> program --> minimal adb and fastboot --> minimal adb and fastboot.exe or if using the sdk, go to \Android SDK Tools\platform-tools hold shift and right click in the folder and select "start a cmd prompt here".
Reboot your phone in bootloader / fastboot usb mode (make sure "fastboot usb" is shown in red)
then type:
Code:
fastboot oem lock
fastboot reboot-bootloader
This will relock your bootloader, required to flash the ruu
Code:
fastboot oem rebootRUU
once rebooted in ruu mode (black screnn with silver htc logo):
Code:
fastboot flash zip ruu_m7_wls_jb_50_sprint_1.29.651.10.zip
First flash will report "flush image again immediately, so do the same command again:
Code:
fastboot flash zip ruu_m7_wls_jb_50_sprint_1.29.651.10.zip
Wait for the ruu to flash then when you see sucessful message:
Code:
fastboot reboot
HI
@alray
I have HTC ONE M7 sprint variant with model no.PN072 which supports both gsm and cdma and I Was not able to use wcdma or 3g mode when using Android version 4.2.
So keeping all these things,and spending 10 hours in downloaading your files,will they work on my htc and won't create future problems like in google updates etc?
---------- Post added at 05:53 AM ---------- Previous post was at 05:14 AM ----------
[/COLOR @alray
I am sorry to say that before I read your reply,I was actually following instructions from
http://forum.xda-developers.com/showthread.php?t=2503646
and so I have flashed the firmware 5.03.651.3 s-on which is of 39886 bytes and now my new details of bootloader are:
***TAMPERED***
***RELOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-1.01.20.0515
OpenDSP-v26.120.274.0202
OS-5.03.651.3
eMMC-boot 2048MB
May 15 2014,16:31:22.1
and my fastboot getvar all details are:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 1.01.20.0515
version-cpld: None
version-microp: None
version-main: 5.03.651.3
version-misc: PVT SHIP S-ON
serialno: ***REMOVED***
imei: ***REMOVED***
meid: ***REMOVED***
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4262mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-1f512bb6
hbootpreupdate: 11
gencheckpt: 0
AND when I downloaded the odex file mentioned by him in the 8c step,I got the error of
remote 12:signature verify failed
and tried then,but got the same error again.
My bootloader is still relocked.
now tell me what should I do?
Hope you bear my stubbornness and Reply.....
Thanks
rakeshrinawa said:
@alray
I have HTC ONE M7 sprint variant with model no.PN072 which supports both gsm and cdma and I Was not able to use wcdma or 3g mode when using Android version 4.2.
So keeping all these things,and spending 10 hours in downloaading your files,will they work on my htc and won't create future problems like in google updates etc?
---------- Post added at 05:53 AM ---------- Previous post was at 05:14 AM ----------
[/COLOR @alray
I am sorry to say that before I read your reply,I was actually following instructions from
http://forum.xda-developers.com/showthread.php?t=2503646
and so I have flashed the firmware 5.03.651.3 s-on which is of 39886 bytes and now my new details of bootloader are:
***TAMPERED***
***RELOCKED***
M7_WLS PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-1.01.20.0515
OpenDSP-v26.120.274.0202
OS-5.03.651.3
eMMC-boot 2048MB
May 15 2014,16:31:22.1
and my fastboot getvar all details are:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 1.01.20.0515
version-cpld: None
version-microp: None
version-main: 5.03.651.3
version-misc: PVT SHIP S-ON
serialno: ***REMOVED***
imei: ***REMOVED***
meid: ***REMOVED***
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4262mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-1f512bb6
hbootpreupdate: 11
gencheckpt: 0
AND when I downloaded the odex file mentioned by him in the 8c step,I got the error of
remote 12:signature verify failed
and tried then,but got the same error again.
My bootloader is still relocked.
now tell me what should I do?
Hope you bear my stubbornness and Reply.....
Thanks
Click to expand...
Click to collapse
flash the 5.03.651.3 ruu posted in that thread.
hi
alray said:
flash the 5.03.651.3 ruu posted in that thread.
Click to expand...
Click to collapse
I flashed it with fastboot and it says signature verify failed,tried again and got the same message.
What should I do now,Please help me,I am totally exhausted.
rakeshrinawa said:
I flashed it with fastboot and it says signature verify failed,tried again and got the same message.
Click to expand...
Click to collapse
Its says signature verify fail because you are trying to flash a rom (stock odexed) using fastboot, you must flash this rom using a custom recovery which will require to unlock the bootloader again so the simplest is to keep your bootloader relocked and flash the RUU
hello
alray said:
Its says signature verify fail because you are trying to flash a rom (stock odexed) using fastboot, you must flash this rom using a custom recovery which will require to unlock the bootloader again so the simplest is to keep your bootloader relocked and flash the RUU
Click to expand...
Click to collapse
****
ok then can you send me the link of ruu file i have to flash as adb is not working in my phone and I can unlock my bootloader if you have a solution after that.
waiting for your reply.
rakeshrinawa said:
****
ok then can you send me the link of ruu file i have to flash
Click to expand...
Click to collapse
lol I think we have some communication issues here :laugh:. The RUU is in the same thread you linked me at post #10. All sprint RUU are listed at the beginning of that thread (in the first few lines of the OP), you need the 5.03.651.3 RUU, download it and lauch it (double click, its an .exe file). Make sure your phone is in bootloader when you launch the ruu.

Screen not responding to touch in TWRP

was trying to root my one for the first time. I followed someone's tutorial online, and everything was perfect at first, until I got into using TWRP for recovery. I used version 2.5. After I got into it, the touch screen is not working. I stuck in the lock screen now, not able to unlock, not able to restart, not even able to power off. After some digging, I found out that probably I should have used the version 2.6 instead in the first place. Now my question is, do I need to wait until the power drains out before I could do anything else, or if there is anything I could do to restart the phone and do this recovery process again with TWRP v2.6? Thanks.
Click to expand...
Click to collapse
have exactly the same problem.
But I can't hard reset the HTC ONE via volume down + power button...
Can't access the phone via USB attached cable and the common tools... :///
Do I have to wait till the battery is empty or is there a further solution?
vin4ester15 said:
have exactly the same problem.
But I can't hard reset the HTC ONE via volume down + power button...
Can't access the phone via USB attached cable and the common tools... :///
Do I have to wait till the battery is empty or is there a further solution?
Click to expand...
Click to collapse
Try the reset with device under a bright light.
What device do you have and what twrp did you flash.
mb_guy said:
Try the reset with device under a bright light.
What device do you have and what twrp did you flash.
Click to expand...
Click to collapse
Looks like its 2.5.0.0 from the picture
mb_guy said:
Try the reset with device under a bright light.
What device do you have and what twrp did you flash.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=rRkAHw_GmIs&list=FLp-bV1_Di0EtsQXswt1FQuQ&index=2
vin4ester15 said:
https://www.youtube.com/watch?v=rRkAHw_GmIs&list=FLp-bV1_Di0EtsQXswt1FQuQ&index=2
Click to expand...
Click to collapse
? what does that tell me about your actual device, carrier, model etc.
mb_guy said:
? what does that tell me about your actual device, carrier, model etc.
Click to expand...
Click to collapse
look 2:05 https://www.youtube.com/watch?v=6fjBcnEJYbI
Ohhh, i reboot it with brith light. But now how to install a normal TWRP? Phone is unlocked. S-off
vin4ester15 said:
Ohhh, i reboot it with brith light. But now how to install a normal TWRP? Phone is unlocked. S-off
Click to expand...
Click to collapse
Why not giving us your phone info here instead of playing this "look at this youtube video" game? If you want help, please answer the questions asked above, better to post a complete "fastboot getvar all" output (excluding your IMEI/MEID/Serialno) so we know everything about your phone an can help you better.
If you have a sprint HTC one, then flash a sprint twrp recovery. You can find the file on the twrp website.
fastboot flash recovery name_of_file.img
fastboot erase cache
fastboot reboot-bootloader
vin4ester15 said:
Ohhh, i reboot it with brith light. But now how to install a normal TWRP? Phone is unlocked. S-off
Click to expand...
Click to collapse
Sorry, but I'm going to let @alray help with this one. Looks like you have 5.05.651.2 rom installed. Is this a sprint device or some other m7_wls device? I have no experience with these, and see many posts with folks flashing wrong recovery or rom and bricking devices.
mb_guy said:
Sorry, but I'm going to let @alray help with this one. Looks like you have 5.05.651.2 rom installed. Is this a sprint device or some other m7_wls device? I have no experience with these, and see many posts with folks flashing wrong recovery or rom and bricking devices.
Click to expand...
Click to collapse
What of them I can install? http://www.htc.com/us/support/rom-downloads.html#unlocked
My phone is unlocked, i can use Any SIM card
vin4ester15 said:
What of them I can install? http://www.htc.com/us/support/rom-downloads.html#unlocked
My phone is unlocked, i can use Any SIM card
Click to expand...
Click to collapse
I don't think you can install any ruu, yet. I also noticed from your video that your device is s-off (security off) no problem, but also supercid (11111111), this is a problem. I don't think a ruu will flash until the cid is reverted to what ever it was initially from the installed ruu carrier. Sprint cid is SPCS_001 for example. I think you will have to rewrite this from adb, but getting out of my knowledge zone here, sorry.
mb_guy said:
I don't think you can install any ruu, yet. I also noticed from your video that your device is s-off (security off) no problem, but also supercid (11111111), this is a problem. I don't think a ruu will flash until the cid is reverted to what ever it was initially from the installed ruu carrier. Sprint cid is SPCS_001 for example. I think you will have to rewrite this from adb, but getting out of my knowledge zone here, sorry.
Click to expand...
Click to collapse
You can flash a RUU with supercid, no problem. But since his phone is a sprint variant, having supercid is somewhat useless since he can only flash RUU for sprint (SPCS_001). Having supercid on a sprint M7 won't hurt but its pretty useless imo... (unlike having supercid on a M7_U/M7_UL which will allow you to flash any RUU you want)
alray said:
You can flash a RUU with supercid, no problem. But since his phone is a sprint variant, having supercid is somewhat useless since he can only flash RUU for sprint (SPCS_001). Having supercid on a sprint M7 won't hurt but its pretty useless imo... (unlike having supercid on a M7_U/M7_UL which will allow you to flash any RUU you want)
Click to expand...
Click to collapse
ohh, i'm a really noob, i install this RUU_M7_WL_JB43_SENSE50_SPCS_MR_Sprint_WWE_3.05.651.6_Radio_1.00.20.1108_NV_SPCS_4.38_003_release_348053_signed_2 Now, i don't have GSM\3g and sim is lock :crying: how to fix?
vin4ester15 said:
ohh, i'm a really noob, i install this RUU_M7_WL_JB43_SENSE50_SPCS_MR_Sprint_WWE_3.05.651.6_Radio_1.00.20.1108_NV_SPCS_4.38_003_release_348053_signed_2 Now, i don't have GSM\3g and sim is lock :crying: how to fix?
Click to expand...
Click to collapse
Sprint M7 is a CDMA phone and will only work on the Sprint network (it can connect to other gsm networks for roaming but you won't get full connectivity), its not the result of the RUU. And btw a RUU can't sim lock a phone, its not possible. The ruu doesn't write anything to the partition where the sim lock info are stored.
can't help any further if you don't post the output of "fastboot getvar all" like asked previously. I don't have time right now to watch some youtube video to figure out what device you have etc.
alray said:
Sprint M7 is a CDMA phone and will only work on the Sprint network (it can connect to other gsm networks for roaming but you won't get full connectivity), its not the result of the RUU. And btw a RUU can't sim lock a phone, its not possible. The ruu doesn't write anything to the partition where the sim lock info are stored.
can't help any further if you don't post the output of "fastboot getvar all" like asked previously. I don't have time right now to watch some youtube video to figure out what device you have etc.
Click to expand...
Click to collapse
C:\Users\Vitalie01\Desktop\OneDrivers_Fastboot\OneDrivers_Fastboot\Fastboot>fast
boot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.16.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA36BS907523
(bootloader) imei: 355859056246580
(bootloader) meid: 99000146869492
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3976mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Before that, it worked. The phone was like out of the store without being tied to an operator. Due to the fact that I could not be updated to Android 5.0, I downloaded the firmware from the official site and set it. With the new firmware the connection was lost. Now I can not use 3G. From the beginning, radio was 1.00 and android 4.4.2. The other parameters are listed in the video at minute 2:05
I tried to install a new version via exe files and zip through. Even I tried to put ViperOne, but once it is installed, an error, TWRP and firmware is deleted. I again through fastboot TWRP load and backup. Otherwise, when you turn on it immediately goes into fastboot, and so on. Something is missing this phone for the proper installation of new versions of android.

Categories

Resources