Database Develop

[Q] Soft or Hard? Bricked HTC One

Okay - Don't want to say NOOB mistake but, failure to follow direction - YES. In any case I NEED HELP!!! Like everyone else, sold my phone and attempted to put it back to stock.
Changes made - Changed to Google Edition from AT&T.
- Rooted Phone - S-OFF - Changed CID to GOOGL001 - flashed GE RUU.zip -- Enough said
Changes made to go back to stock
- Changed CID back to CWS__001 -- Turned S-On ** First mistake -- Locked bootloader -- attempted to flash ATTRUU
- Went to flash cyanogenmod just to have a rom and accidentally FORMATTED in TWRP -- 2nd mistake
I have also tried every RUU that might have an inkling of success but all i get is the 12 signature verify fail
I have tried everything twice. But with out S-OFF i think i'm dead in the water.
I tried - flashing hboot1.44 (modifing android-info) and get error
c:\androidsdk\sdk\platform-tools>fastboot flash zip hboot144.zip
target reported max download size of 1526722560 bytes
sending 'zip' (508 KB)...
OKAY [ 0.230s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.279s
** I have tried RUU.exe's but nothing will go because of the CID/HBOOT mismatch
Here is what I have
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.06.1700.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35GW903487
(bootloader) imei: 354439055133427
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 6.940s
** If i could just flash an hboot - I could get an RUU working but again I need S-OFF.
- Also when I try to flash cyanogenmod from recovery, it says Unable to mount system, data, can't mount **** and I assume because recovery reformatted them and the correct file systems are not in place.
FML!!! PLEASE HELP

Read Vomers great post, and follow the instructions very carefully
http://forum.xda-developers.com/showthread.php?t=2365506&page=4

Also remove your imei number from your post
Sent from my HTC One using xda app-developers app

[Q] Can't find the right ruu for me

I can't find the proper ruu for my device. I listed all my info below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.666.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4262mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT

SGodoy said:
I can't find the proper ruu for my device. I listed all my info below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.666.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVE THIS
(bootloader) imei: REMOVE THIS
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4262mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Click to expand...
Click to collapse
First: Remove IMEI and SN numbers from your previous post, confidential #
There is no RUU available for .666 sw (if I remember .666 is from bell mobility?)
There is no guru reset for .666 sw
but there is a Nandroid backup avaible for .666 on htc1guru.com here: http://www.htc1guru.com/downloads/stock-nandroid-downloads/

Okay so i downloaded M7 TWRP Nandroid Backup CID BM 001 3.23.666.1, went to fastboot and typed "fastboot flash recovery TWRP.img". Nothing happened so i changed it too "fastboot flash recovery TWRP.zip". I got this.....
C:\Fastboot>fastboot flash recovery twrp.zip
sending 'recovery' (1054139 KB)...
OKAY [ 48.591s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 176.495s

What is your goal?

SaHiLzZ said:
What is your goal?
Click to expand...
Click to collapse
To return it back to stock. Right now it's in boot loop state i cant get into recovery or my actual phone.

Unlock bootloader and try again

SaHiLzZ said:
Unlock bootloader and try again
Click to expand...
Click to collapse
Now i got this
C:\Fastboot>fastboot flash recovery twrp.zip
sending 'recovery' (1054139 KB)...
OKAY [ 48.785s]
writing 'recovery'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 48.807s

Active cmdline overflow?

I've had a look around and read other topics on this, but none have seemed to help me. I was in the middle of returning my HTC One back to stock, all was good until I did an OTA update. Now I keep getting "active cmdline overflow! (1090 bytes)"
I can't get back into RUU by "fastboot oem rebootRUU"
I can't access Recovery.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
Any help will be appreciated

Flickayy said:
I've had a look around and read other topics on this, but none have seemed to help me. I was in the middle of returning my HTC One back to stock, all was good until I did an OTA update. Now I keep getting "active cmdline overflow! (1090 bytes)"
I can't get back into RUU by "fastboot oem rebootRUU"
I can't access Recovery.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
Any help will be appreciated
Click to expand...
Click to collapse
Remove your serial number and your IMEI number from your original post like it did in the quote above, its dangerous to post it.
then see here for your problem and a fix http://forum.xda-developers.com/showthread.php?t=2739126
copy and paste the dd commands to be safe, if you make a mistake with the command or code then its bye bye phone.

ah thanks for that.
I've tried to flash a new recovery, but I still can't boot into it.

Flickayy said:
ah thanks for that.
I've tried to flash a new recovery, but I still can't boot into it.
Click to expand...
Click to collapse
you HAVE TO flash that modified recovery in the thread I linked, its the only one that will work.

Sorry if I didn't make it clear, but that was the recovery I flashed. Yet it still reboots to the bootloader instead.

Flickayy said:
Sorry if I didn't make it clear, but that was the recovery I flashed. Yet it still reboots to the bootloader instead.
Click to expand...
Click to collapse
Oh sorry, my bad, reading through the thread, its states you need to downgrade your HBOOT, but ill just double check that, you are s-off so shouldn't be a problem.

it's proving tricky.
I've downloaded the hboot, when I get an error.. FAILED <remote: not allowed>

yup, seems the problem is with HBOOT 1.55 and upwards, a lot of people on there are just downgrading there HBOOT to 1.44 then the recovery works, however, if you decided to do this you need to be aware that windows 8 upwards will no longer detect your phone, you must use windows 7 or Ubuntu.

I'm using Window 7 Professional 64-bit.
Can you point me in the right direction on how to correctly downgrade? I tried to dowgrade to 1.44 and got this.
C:\Users\Ricky\Downloads>fastboot flash zip h144.zip
target reported max download size of 1514139648 bytes
sending 'zip' (501 KB)...
OKAY [ 0.246s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 0.656s

Flickayy said:
I'm using Window 7 Professional 64-bit.
Can you point me in the right direction on how to correctly downgrade? I tried to dowgrade to 1.44 and got this.
C:\Users\Ricky\Downloads>fastboot flash zip h144.zip
target reported max download size of 1514139648 bytes
sending 'zip' (501 KB)...
OKAY [ 0.246s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 0.656s
Click to expand...
Click to collapse
send me a link to the hboot you downloaded please

I managed to get this one to work http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
it's booted, waiting for it to go past the logo now, thank you for the help!

Flickayy said:
I managed to get this one to work http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
it's booted, waiting for it to go past the logo now, thank you for the help!
Click to expand...
Click to collapse
excellent, glad it worked, you have to be very careful with HBOOTs, the wrong one will lead to an instant brick, you don't want to be seeing any error's :crying:

Sorry for the slightly necro post.
I'm running into the same problem again, after updating via OTA.
My HBOOT got set to 1.57 and every time I try to flash the zip I get an error.
C:\Users\Ricky\Downloads>fast
< waiting for device >
target reported max download
sending 'zip' (501 KB)...
OKAY [ 0.251s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.295s
here is my getvar
C:\Users\Ricky\Downloads>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3703mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.163s
thanks!

Flickayy said:
Sorry for the slightly necro post.
I'm running into the same problem again, after updating via OTA.
My HBOOT got set to 1.57 and every time I try to flash the zip I get an error.
C:\Users\Ricky\Downloads>fast
< waiting for device >
target reported max download
sending 'zip' (501 KB)...
OKAY [ 0.251s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 0.295s
here is my getvar
C:\Users\Ricky\Downloads>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3703mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.163s
thanks!
Click to expand...
Click to collapse
what file are you trying to flash and using which command?

filesize looks like the fw_hboot_zip
did you fastboot oem rebootRUU first?

HTC one brick

So I have an HTC One s-off rooted with cm11.Two days ago it suddenly turned off.Now I can't:
-reboot,it just shows the logo thn turns of
-go to recovery.When I press recovery in bootloader,it just reboots to the bootloader
-cannot flash recovery via fastboot
sending 'recovery' (4336 KB)... OKAY [ 0.391s]
writing 'recovery'... FAILED (remote: image update error)
finished. total time: 1.281s
Please help!

Trinity99 said:
So I have an HTC One s-off rooted with cm11.Two days ago it suddenly turned off.Now I can't:
-reboot,it just shows the logo thn turns of
-go to recovery.When I press recovery in bootloader,it just reboots to the bootloader
-cannot flash recovery via fastboot
sending 'recovery' (4336 KB)... OKAY [ 0.391s]
writing 'recovery'... FAILED (remote: image update error)
finished. total time: 1.281s
Please help!
Click to expand...
Click to collapse
Try to flash a RUU for your original OS version. This should return you back to stock rom and firmware.

majmoz said:
Try to flash a RUU for your original OS version. This should return you back to stock rom and firmware.
Click to expand...
Click to collapse
How can I decide witch RUU is suitable for my phone?

Trinity99 said:
How can I decide witch RUU is suitable for my phone?
Click to expand...
Click to collapse
post your fastboot getvar all without imei and serial number

Seanie280672 said:
post your fastboot getvar all without imei and serial number
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4309mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
here it is , thanks for the help.

Trinity99 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4309mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
here it is , thanks for the help.
Click to expand...
Click to collapse
You should be able to use this RUU: ruu_m7_ul_k44_sense55_mr_htc_europe_4-19-401-9_r_radio_4a-23-3263-28_10-38r-1157-04l_release_353069_signed_2-1-exe
There is all so an OTA update you can get if it doesn't automatically down load.

Thanks I try it

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\username\Data>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
(bootloader) SD: write failed in CMD25.
OKAY [ 1.073s]
finished. total time: 1.075s
This is the error I get when trying to get in RUU mode

Any ideas?

Trinity99 said:
Any ideas?
Click to expand...
Click to collapse
just run the exe file in windows with your phone in fastboot USB mode, let the RUU do the rest.

Seanie280672 said:
just run the exe file in windows with your phone in fastboot USB mode, let the RUU do the rest.
Click to expand...
Click to collapse
When the installer restarts the phone and "waiting for bootloader" appears the phone doesent boots.Manual boot does nonthing cause the program cannot see the device

Trinity99 said:
When the installer restarts the phone and "waiting for bootloader" appears the phone doesent boots.Manual boot does nonthing cause the program cannot see the device
Click to expand...
Click to collapse
check the drivers in device manager, does it say MyHTC ? even whilst in the bootloader.

Seanie280672 said:
check the drivers in device manager, does it say MyHTC ? even whilst in the bootloader.
Click to expand...
Click to collapse
Yes

[Q] How to unroot S-ON with CM10

I have an M7 which currently has cm10 installed and unlocked using HTC Dev. I can't S-OFF becuase the HBOOT is 1.61 (I've tried all methods apart from sunshine but they've failed)
The phone is currently locked to o2 uk, and i got an unlock code but aparrently these only work if the phone is stock.
I currently have cm10 installed, and i need to install a stock rom and relock.
I've tried flashing a RUU but no luck.
Currently have TWRP RECOVERY.
any help greatly appreciated!

charmander21 said:
I have an M7 which currently has cm10 installed and unlocked using HTC Dev. I can't S-OFF becuase the HBOOT is 1.61 (I've tried all methods apart from sunshine but they've failed)
The phone is currently locked to o2 uk, and i got an unlock code but aparrently these only work if the phone is stock.
I currently have cm10 installed, and i need to install a stock rom and relock.
I've tried flashing a RUU but no luck.
Currently have TWRP RECOVERY.
any help greatly appreciated!
Click to expand...
Click to collapse
O2 UK RUU is the 2nd one down in the list, instructions on how to flash it are a bit further up http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
By the way, HBOOT 1.61 (which is the Lollipop HBOOT) Sunshine is the only way to s-off this HBOOT, dont waste your time trying other methods, they will fail, and Sunshine also requires a stock rooted rom, so after flashing the rom linked above, just flash a custom recovery, root it by flashing SuperSU 2.46.zip and then download and run sunshine.......and the alternative, live with s-on.

Thanks, I tried this method but flashing the rom failed. THe process went on for several minutes then ended in this:
sending 'zip'... (368766 KB) OKAY
sending time = 15.457 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
Execution time is 421(s)
Now i can only boot into bootloader and not android.

after a couple of reboots i'm back into android. Thanks.

charmander21 said:
after a couple of reboots i'm back into android. Thanks.
Click to expand...
Click to collapse
theres 2 reasons why you got those error's
1. either you are s-on and didnt relock your bootloader first
or
2. you didnt use the recommended HTC_fastboot.exe from the instructions, the normal fastboot wont work, you need to use HTC's
just to be sure, could you post your fastboot getvar all without imei and serial number please.

I did make sure to follow the instructions, i've double checked them and I did follow allt he steps including using htc's fast boot. Here are the results from getvar all
c:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.206.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3839mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4deaef41
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.168s
Note i am currently on insertcoin, not the o2 RUU.

charmander21 said:
I did make sure to follow the instructions, i've double checked them and I did follow allt he steps including using htc's fast boot. Here are the results from getvar all
c:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.206.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3839mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4deaef41
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.168s
Note i am currently on insertcoin, not the o2 RUU.
Click to expand...
Click to collapse
doesnt matter which rom your already on, it doesnt change the firmware, and you are already on the latest firmware 7.18.206.2, that RUU.zip should work fine, maybe there is a problem with the RUU.
there is a stock nandroid here: https://www.androidfilehost.com/?fid=95916177934549269 which you can restore through twrp recovery if you want to get back to full stock.