[SOLVED][Q] Hard Bricked Xperia Z? - Xperia Z Q&A, Help & Troubleshooting

Did I just HARD BRICKED my phone?
I decided to flash Hordor kernel (http://forum.xda-developers.com/xperia-z/orig-development/kernel-hodorkernel-t2865648) to get kexec-hardboot patch to test lollipop on my Xperia Z. I saved a TWRP backup of this before I flashed kernel (hardor zip that's 18mb). When I flashed the kernel from TWRP and reboot, screen goes black and no more Sony logo, no LED, but the power button does vibrate the phone. Holding Vol UP and Power doesn't do anything.
Prior to flashing, I was on Xperia C6602 KitKat with eXistenZ Rom 3.5.0 (based on 10.5.A.0.283) Locked Bootloader. Used TWRP 2.7.0.1 (not 100% sure with that number, I remember 2.7)
When I hold down power button, it vibrates, then 2 seconds later vibrates again like I was trying to turn on the phone.
I need help... And I can't test on flashtool because I'm not near a computer.

You flashed a custom kernel on a locked bootloader device. You can't do that. Use Flashtool to flash the kernel from a stock FTF and that should fix it.
Edit: Here's a kernel only FTF you can try flashing - https://www.androidfilehost.com/?fid=95832962473396241
If that doesn't work, you might have to flash a full FTF.

kingvortex said:
You flashed a custom kernel on a locked bootloader device. You can't do that. Use Flashtool to flash the kernel from a stock FTF and that should fix it.
Edit: Here's a kernel only FTF you can try flashing - https://www.androidfilehost.com/?fid=95832962473396241
If that doesn't work, you might have to flash a full FTF.
Click to expand...
Click to collapse
Alright, that kernel only ftf solved part of my problem. Now instead of a flashing red dot and phone vibrating loop, I'm stuck in flashmode (but fixable when I flash ftf)
Huge thanks for clarifying my issue. I'll post back when I hit into something or completely solve my problem.

Happy to help.

kingvortex said:
Happy to help.
Click to expand...
Click to collapse
Question, I had a few pretty important things on my Internal Storage that I don't want to lose. Is there a way to save them? Still downloading ftf (http://forum.xda-developers.com/xperia-z/general/stock-rom-xperia-z-c6602-10-5-1-0-283-t2876962) at the moment.

kentexcitebot said:
Hey question, I had a few pretty important things on my Internal Storage that I don't want to lose. Is there a way to save them? Still downloading ftf (http://forum.xda-developers.com/xperia-z/general/stock-rom-xperia-z-c6602-10-5-1-0-283-t2876962) at the moment.
Click to expand...
Click to collapse
When flashing, make sure that nothing is checked in the wipe section. That should ensure that your data is safe.

kingvortex said:
When flashing, make sure that nothing is checked in the wipe section. That should ensure that your data is safe.
Click to expand...
Click to collapse
Dang, very fast response.
:good::good::good:
Thanks!

You're welcome.
It's always good to make sure you have backups of important stuff on your phone, especially if you're going to flash things to it. Just some advice.

THREAD SOLVED!
Thanks for getting me out of this hot mess @kingvortex !
:good::good::good::good::good::good:

Glad you got it sorted.

Related

[Q] Xperia Z1 is recognized as "togari", Z Ultra

As the title suggests, I rooted my phone, unlocked BL and was about to flash CM for Honami, which is Z1, but the flashing of the ROM was stopped because it recognizes my device, a Z1, as a "togari", a Z Ultra. I find this quite odd as I have practically no idea why it does that.
I also tried flashing "togari" CM ROM, but that also fails.
Any fixes for this?
Sari95 said:
As the title suggests, I rooted my phone, unlocked BL and was about to flash CM for Honami, which is Z1, but the flashing of the ROM was stopped because it recognizes my device, a Z1, as a "togari", a Z Ultra. I find this quite odd as I have practically no idea why it does that.
I also tried flashing "togari" CM ROM, but that also fails.
Any fixes for this?
Click to expand...
Click to collapse
if you are sure that you have an z1... then just remove the device check in the updater script (within the zip...) it is in the beginning... cant really remember how it looks but ... search google perhaps.. then it will flash weird enough ... my s also identifies as an sl... but that is from the build prop
HellRoot said:
if you are sure that you have an z1... then just remove the device check in the updater script (within the zip...) it is in the beginning... cant really remember how it looks but ... search google perhaps.. then it will flash weird enough ... my s also identifies as an sl... but that is from the build prop
Click to expand...
Click to collapse
Haha, yes. I google for it and tried to simply delete the device check in update-script, but it didn't work for me. I believe the issue is in my recovery, which is not a 4.4 kitkat recovery. The CWM-recovery I have at the moment is 6.0.3.6 and I believe that is the reason for my issues. I have had no luck trying to find a 4.4 kitkat recovery... any tips here?
Sari95 said:
Haha, yes. I google for it and tried to simply delete the device check in update-script, but it didn't work for me. I believe the issue is in my recovery, which is not a 4.4 kitkat recovery. The CWM-recovery I have at the moment is 6.0.3.6 and I believe that is the reason for my issues. I have had no luck trying to find a 4.4 kitkat recovery... any tips here?
Click to expand...
Click to collapse
well..i have never had problems with it being the recovery... what error does it make now?
HellRoot said:
well..i have never had problems with it being the recovery... what error does it make now?
Click to expand...
Click to collapse
I tried this recovery too, without any luck: http://forum.xda-developers.com/showthread.php?p=49966299
To begin with I got Status 7 error, which is now gone.. I found a tutorial to flash SlimRom for Z1, which is android 4.4.2: http://www.ibtimes.co.uk/android-4-4-2-kitkat-sony-xperia-z1-available-via-slimkat-rom-1432702
However, I was only able to make emergency calls, no cellular at all. I flashed CM through the same method and everything I tried worked, except cellular. Thus, I had to wipe it and install stock Sony firmware.
After that I tried flashing CM the "normal" way through recovery and everything installed as usual, but when I push reboot to reboot the system, the phone simply shuts off. Even if I press the powerbutton to turn it on, it only vibrates and nothing else happens. Again, I flashed stock firmware to be able to use the phone again...
I am very confused about this, because it does not give any errors. It simply does not work :l
[/COLOR]
Sari95 said:
I tried this recovery too, without any luck: http://forum.xda-developers.com/showthread.php?p=49966299
To begin with I got Status 7 error, which is now gone.. I found a tutorial to flash SlimRom for Z1, which is android 4.4.2: http://www.ibtimes.co.uk/android-4-4-2-kitkat-sony-xperia-z1-available-via-slimkat-rom-1432702
However, I was only able to make emergency calls, no cellular at all. I flashed CM through the same method and everything I tried worked, except cellular. Thus, I had to wipe it and install stock Sony firmware.
After that I tried flashing CM the "normal" way through recovery and everything installed as usual, but when I push reboot to reboot the system, the phone simply shuts off. Even if I press the powerbutton to turn it on, it only vibrates and nothing else happens. Again, I flashed stock firmware to be able to use the phone again...
I am very confused about this, because it does not give any errors. It simply does not work :l
Click to expand...
Click to collapse
just copied from the CM11 dev fora...
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
HellRoot said:
[/COLOR]
just copied from the CM11 dev fora...
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
Click to expand...
Click to collapse
Hmm... seems reasonable. Could you give me the link to the fora, so I can try this method out too ?
Sari95 said:
Hmm... seems reasonable. Could you give me the link to the fora, so I can try this method out too ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2540650
there it is.... hope you figure it out.
Sari95 said:
As the title suggests, I rooted my phone, unlocked BL and was about to flash CM for Honami, which is Z1, but the flashing of the ROM was stopped because it recognizes my device, a Z1, as a "togari", a Z Ultra. I find this quite odd as I have practically no idea why it does that.
I also tried flashing "togari" CM ROM, but that also fails.
Any fixes for this?
Click to expand...
Click to collapse
I had this problem when I try to flash with LB.
HellRoot said:
http://forum.xda-developers.com/showthread.php?t=2540650
there it is.... hope you figure it out.
Click to expand...
Click to collapse
Thank you I kind of figured it out... but I am not sure why/ how xD I wiped everything, flashed stock firmware "a.136", rooted, installed recovery and flashed CM. After that, it worked as it is supposed to, so problem solved
Thanks for your help
Sari95 said:
Thank you I kind of figured it out... but I am not sure why/ how xD I wiped everything, flashed stock firmware "a.136", rooted, installed recovery and flashed CM. After that, it worked as it is supposed to, so problem solved
Thanks for your help
Click to expand...
Click to collapse
good to hear hope you enjoy the CM.... if you want then please tell me how it is running.. performance, battery, camera etc
have a good day

Xperia Z1 Bricked

Hi guys I seriously need help. I bricked my Z1 c6903. I accidentally deleted the OS by wiping dalvik, system, etc,. Im sorry if this was already posted somewhere here. Im new to this. If someone would kindly help me or give me help in unbricking my device Id really appreciate it.
PS, Z1 was given to me already rooted. It has TWRP recovery, and I know that Im really stupid for tinkering with the advanced option. Im new to using custom recovery, rooting, etc.
jryandl said:
Hi guys I seriously need help. I bricked my Z1 c6903. I accidentally deleted the OS by wiping dalvik, system, etc,. Im sorry if this was already posted somewhere here. Im new to this. If someone would kindly help me or give me help in unbricking my device Id really appreciate it.
PS, Z1 was given to me already rooted. It has TWRP recovery, and I know that Im really stupid for tinkering with the advanced option. Im new to using custom recovery, rooting, etc.
Click to expand...
Click to collapse
If you still have recovery , boot into recovery, mount usb and copy ROM from your PC.
Flash ROM and restart...
If you don't have recovery, use flashtool to flash ftf. (534) root it and then upgrade to 761 (latest firmware)
BTW, your device isn't bricked, there's missing system, that's all...
And yeah...that wasn't stupid at all...this things happens and, if you ask me- TWRP team should change that wipe options...
It's not well made...
First option should be only cache wipe and advanced should have format data and system option...
Sent from my D6503 using Tapatalk
funky0308 said:
If you still have recovery , boot into recovery, mount usb and copy ROM from your PC.
Flash ROM and restart...
If you don't have recovery, use flashtool to flash ftf. (534) root it and then upgrade to 761 (latest firmware)
BTW, your device isn't bricked, there's missing system, that's all...
And yeah...that wasn't stupid at all...this things happens and, if you ask me- TWRP team should change that wipe options...
It's not well made...
First option should be only cache wipe and advanced should have format data and system option...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
First of all, thanks for taking the time to reply.
I tried booting to recovery but it wont. Its stuck in the sony logo. I guess ill go with option 2(flashing ftf)
is it ok if I flash the ftf then NOT root it?
I found a guide how to flash an ftf file in this link: http://forum.xda-developers.com/showthread.php?t=2428319
is this guide applicable for the z1 too?
Thank you
jryandl said:
First of all, thanks for taking the time to reply.
I tried booting to recovery but it wont. Its stuck in the sony logo. I guess ill go with option 2(flashing ftf)
is it ok if I flash the ftf then NOT root it?
I found a guide how to flash an ftf file in this link: http://forum.xda-developers.com/showthread.php?t=2428319
is this guide applicable for the z1 too?
Thank you
Click to expand...
Click to collapse
You are welcome mate
Yeap...
One thing is very important - use latest flashtool..and everything will be OK.
You'll be surprised how easy that is...
Flash firmware 534 (JB)
Turn device off, open flashtool and prepare 534 firmware, start flashing and connect device (holding vol down) connect device when flashtool ask for it, don't do that right away...
root it with binary method (just Google" binary root method xda") first link is what you need.
Install NUT recovery.
Restart to recovery, flash NUT 757, TURN DEVICE OFF!!!
And flash stripped ftf (that's kernel)
It's very important to turn device off, don't restart. (to flash stripped ftf)
I always practice to hit flashtool "start" button and wait for flashtool to ask for device, that's is the best way to be 100% sure your device won't leave flashmod
Sent from my D6503 using Tapatalk
funky0308 said:
You are welcome mate
Yeap...
One thing is very important - use latest flashtool..and everything will be OK.
You'll be surprised how easy that is...
Flash firmware 534 (JB)
Turn device off, open flashtool and prepare 534 firmware, start flashing and connect device (holding vol down) connect device when flashtool ask for it, don't do that right away...
root it with binary method (just Google" binary root method xda") first link is what you need.
Install NUT recovery.
Restart to recovery, flash NUT 757, TURN DEVICE OFF!!!
And flash stripped ftf (that's kernel)
It's very important to turn device off, don't restart. (to flash stripped ftf)
I always practice to hit flashtool "start" button and wait for flashtool to ask for device, that's is the best way to be 100% sure your device won't leave flashmod
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
well the firmware that ill be using is 257 because its branded on a carrier here on my country(PH).
do I really need to root after flashing? I was hoping that root isnt required.
is it ok if I just flash the 257 and update it via OTA/pc companion?
thank you
jryandl said:
well the firmware that ill be using is 257 because its branded on a carrier here on my country(PH).
do I really need to root after flashing? I was hoping that root isnt required.
is it ok if I just flash the 257 and update it via OTA/pc companion?
thank you
Click to expand...
Click to collapse
If you don't want to root device...just pick firmware you wanna use and flash using flashtool...
Sent from my D6503 using Tapatalk
funky0308 said:
If you don't want to root device...just pick firmware you wanna use and flash using flashtool...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
cool. thanks mate
so its ok to install the firmware then just update it to Kitkat using OTA/pc companion?
also, is it ok to flash the firmware without rooting it?
thank you for the help. I really appreciate it!
jryandl said:
cool. thanks mate
so its ok to install the firmware then just update it to Kitkat using OTA/pc companion?
also, is it ok to flash the firmware without rooting it?
thank you for the help. I really appreciate it!
Click to expand...
Click to collapse
Well yeah...I just said that..
If you don't want to root then don't root it, just flash firmware.
I would flash latest firmware but if you are sure you'll get 757 or 761 OTA update then you can flash older firmware...
Sent from my D6503 using Tapatalk
funky0308 said:
Well yeah...I just said that..
If you don't want to root then don't root it, just flash firmware.
I would flash latest firmware but if you are sure you'll get 757 or 761 OTA update then you can flash older firmware...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
lol. just making sure.
thank you so much! ill do that now.
funky0308 said:
Well yeah...I just said that..
If you don't want to root then don't root it, just flash firmware.
I would flash latest firmware but if you are sure you'll get 757 or 761 OTA update then you can flash older firmware...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
come to think of it. it sounds easy. just download the ftf then flash using flashtool.
btw. will it cause any problems if the phone has a custom recovery(twrp)?
thank you
If you do not want root just use pccompanion and choose repair my phone when the options comes up.
1 step fix!
gregbradley said:
If you do not want root just use pccompanion and choose repair my phone when the options comes up.
1 step fix!
Click to expand...
Click to collapse
Thanks for the reply
can pc companion read the phone even though the OS has been erased?
jryandl said:
come to think of it. it sounds easy. just download the ftf then flash using flashtool.
btw. will it cause any problems if the phone has a custom recovery(twrp)?
thank you
Click to expand...
Click to collapse
Man, I asked you do you still have recovery and you said no?!?
Use recovery to flash stock based ROMs like NUT or iHackers, flashtool or pc companion to flash stock unrooted firmware.
It won'tbe a problem if you have twrp (recovery), it'll wipe everything...
We are talking for a two hours and you are asking same question over and over again...
I wanna help but come on....
Sent from my D6503 using Tapatalk
It doesn't have to
Turn the phone off, do not attach it to the PC
Run pccompanion, choose software update
When prompted choose the blue option to repair the phone, go through the instructions and attach phone in flashmode when prompted
funky0308 said:
Man, I asked you do you still have recovery and you said no?!?
Use recovery to flash stock based ROMs like NUT or iHackers, flashtool or pc companion to flash stock unrooted firmware.
It won'tbe a problem if you have twrp (recovery), it'll wipe everything...
We are talking for a two hours and you are asking same question over and over again...
I wanna help but come on....
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
sorry. i told ya i was new to this so even the concepts im still kinda learning. anyway thanks.
what I meant there was the phone has/had a recovery before it got bricked. after it got bricked i couldnt boot into twrp...sooo... yeah im not sure if the phone still has recovery.
jryandl said:
sorry. i told ya i was new to this so even the concepts im still kinda learning. anyway thanks.
what I meant there was the phone has/had a recovery before it got bricked. after it got bricked i couldnt boot into twrp...sooo... yeah im not sure if the phone still has recovery.
Click to expand...
Click to collapse
Yeah ...Ok
Just did what Greg said, it's easier...
Sent from my D6503 using Tapatalk
gregbradley said:
It doesn't have to
Turn the phone off, do not attach it to the PC
Run pccompanion, choose software update
When prompted choose the blue option to repair the phone, go through the instructions and attach phone in flashmode when prompted
Click to expand...
Click to collapse
wow thats an easier method.lol will try that also before trying flashtool. thank you
thank you guys its fixed and alive now!

[Q] HELP!!! Bootloop

This is my first time using XDA. I can't post this in development threads, so I'm putting it here.
I am rooted, bootloaded locked, and have been using Existenz. When I updated to Existenz 4.0, (cleared cache and dalvic cache) I got a bootloop. It says SONY then that fades away. If I charge it, the bottom light glows red. If I connect to computer in flashmode (volume down) the bottom glows green. I have TWRP and CWM but don't know how to boot into them, as the thing my xperia sp normally does (bottom cycles through three colors, during which you hit a button to boot into recovery) isn't happening. I need urgent help. Thanks in advance
Kuvster2014 said:
This is my first time using XDA. I can't post this in development threads, so I'm putting it here.
I am rooted, bootloaded locked, and have been using Existenz. When I updated to Existenz 4.0, (cleared cache and dalvic cache) I got a bootloop. It says SONY then that fades away. If I charge it, the bottom light glows red. If I connect to computer in flashmode (volume down) the bottom glows green. I have TWRP and CWM but don't know how to boot into them, as the thing my xperia sp normally does (bottom cycles through three colors, during which you hit a button to boot into recovery) isn't happening. I need urgent help. Thanks in advance
Click to expand...
Click to collapse
try flashing another recovery from flashtool... and flash the whole v4.0.0 existenz ROM... not the OTA
try it brother.. all the best!!! :good:
Thanks, but..
adil786ali63 said:
try flashing another recovery from flashtool... and flash the whole v4.0.0 existenz ROM... not the OTA
try it brother.. all the best!!! :good:
Click to expand...
Click to collapse
Thanks, but what would I flash from flashtool (could you link me to a file??). I really have no idea how to get into a recovery. I can't even charge the phone without the bottom glowing green for a bit, then it getting stuck back into the bootloop.
Kuvster2014 said:
Thanks, but what would I flash from flashtool (could you link me to a file??). I really have no idea how to get into a recovery. I can't even charge the phone without the bottom glowing green for a bit, then it getting stuck back into the bootloop.
Click to expand...
Click to collapse
try this kernel recovery i have attached... its doomkernel with advanced recovery
follow these steps :
open flashtool
connect your device in fastboot mode (volume up while connecting through usb)
it will show that your device is connected in fastboot mode
click the flash button
select fastboot
than click on flash kernel to flash
specify the path for the file
click ok and your recovery will be installed..
(extract the file first)
all the best bro..!!! :good:
Do not flash this kernel if you are bootloader locked as you said you were.
Just download a full 205 FTF and start from scratch with towelroot and recovery from dev section. Then reflash existenz.
Thanks
Oblox said:
Do not flash this kernel if you are bootloader locked as you said you were.
Just download a full 205 FTF and start from scratch with towelroot and recovery from dev section. Then reflash existenz.
Click to expand...
Click to collapse
Thanks, do I flash the .205 ftf through flashtool? Do I clear data or cache or dalvic or what? Sorry but I need the specifics . I also thought towelroot only worked for kitkat, are you sure it works for xperia sp .205?
Yes flash through flashtool, just make sure the TA partition isnt selected and then flash using default settings.
Yes towelroot works, ive used it loads of times myself.

[Help] Infinite CM11 launching

Hi guys!
I've wanted to install CM11 on my Xperia SP. I unlocked bootloader, flashed kernel and installed a zip from sd, but when I'm rebooting there's only CM logo. I was patient, but it didn't turned on after 7 hours. I made full wipe and format before installing. Could you help me?
Same problem here. I also unlocked the bootloader, did the wipe & format, then installed the zip. (I didn't flash a kernel.) If I remember correctly, there were some error messages during the wipe & format stage. I'll look it up when I'm home, haven't got the phone with me right now.
Come on guys, I know some of you can help me
pparker884 said:
Come on guys, I know some of you can help me
Click to expand...
Click to collapse
Well if you are coming from stock directly, I would advise you to flash the kernel first and then flash the rom from the recovery.
Its about some mounts and partitions.
sarkar1990 said:
Well if you are coming from stock directly, I would advise you to flash the kernel first and then flash the rom from the recovery.
Its about some mounts and partitions.
Click to expand...
Click to collapse
I tried, didn't work ;/
pparker884 said:
I tried, didn't work ;/
Click to expand...
Click to collapse
Did you try flashing the stock .207 ftf over Flashtool?
Marionette said:
Did you try flashing the stock .207 ftf over Flashtool?
Click to expand...
Click to collapse
Flashmode turns off after some time so I can't.
pparker884 said:
Flashmode turns off after some time so I can't.
Click to expand...
Click to collapse
It turns off for me too,but It flashes the file.
OPEN Flashtool
Make sure that you have drivers installed.
Select the thunder icon.
Select Flashmode.
Select your firmware.
Wait for Flashtool to notify you that you must connect your device.
HOLD DOWN the Vol DOWN button and connect the phone(DONT RELEASE THE VOL DOWN BUTTON UNTIL FLASHTOOL STARTS FLASHING/DETECTS YOUR DEVICE AND READS ITS INFO)
You have a but more complex Soft brick,so try my method.
Sent from my Xperia SP using XDA Premium 4 mobile app
Marionette said:
It turns off for me too,but It flashes the file.
OPEN Flashtool
Make sure that you have drivers installed.
Select the thunder icon.
Select Flashmode.
Select your firmware.
Wait for Flashtool to notify you that you must connect your device.
HOLD DOWN the Vol DOWN button and connect the phone(DONT RELEASE THE VOL DOWN BUTTON UNTIL FLASHTOOL STARTS FLASHING/DETECTS YOUR DEVICE AND READS ITS INFO)
You have a but more complex Soft brick,so try my method.
Click to expand...
Click to collapse
Thanks Marionette! Phone works on stock .205
sarkar1990 said:
Well if you are coming from stock directly, I would advise you to flash the kernel first and then flash the rom from the recovery.
Its about some mounts and partitions.
Click to expand...
Click to collapse
YES! Thank you! Flashing a kernel first (I used WilliamsKernel) solved this for me.

Solved - Please Close Thread

*SOLVED
super0dd said:
Yes, it was a stupid mistake.
Locked bootloader. Couple of minutes ago, I just flashed in the XZDualRecovery and then flashed the kernel of TrinityVengeanceRaptorX™ HD 1.3 . After that, I made a serious mistake: I FORGOT TO FLASH THE ROM AND PRESSED "Reboot System".
So now, when I press the power button, my Z1 merely vibrates for once, sometimes with the red light blinking for a while. Yeah, it bricked. Not even show the bootlogo.
Before I flash that kernel, I had backed up my whole system, every partition, so is it possible that I could re-flash the recovery and then restore everything?
Or I have to use a ftf to wipe out everything entirely?
Click to expand...
Click to collapse
It's not a hardbrick
Just flash stock kernel via flashtool (fastboot) then xz recovery and restore your backup
Last time i flashed mtk cwm as kernel on my z1:fingers-crossed:
Red-code said:
It's not a hardbrick
Click to expand...
Click to collapse
yeah, i just figured out how to flash a stock kernel from stock ftf using flashtool.
super0dd said:
yeah, i just figured out how to flash a stock kernel from stock ftf using flashtool.
Click to expand...
Click to collapse
extract ftf as zip then flash the kernel file in fastboot

Categories

Resources