Everybody works now no need for this thread
T705 Download: See main thread (Official build there)
T800 Download: See main thread (Official build there)
T805 Download: See main thread (Official build there)
Reserved
I unfortunately can not boot the rom on the T800. Gets stuck in a boot loop.
Zadeis said:
I unfortunately can not boot the rom on the T800. Gets stuck in a boot loop.
Click to expand...
Click to collapse
ok cool ill try a build with the cm kernel instead of my own thanks for reporting that.
deadman96385 said:
ok cool ill try a build with the cm kernel instead of my own thanks for reporting that.
Click to expand...
Click to collapse
Be aware that the CM lollipop roms have been having problems with having lag on certain tablets with me being a part of that group.
t705 also having boot loop. stucked on samsung logo
Thanks for the attempt.
Zadeis said:
Be aware that the CM lollipop roms have been having problems with having lag on certain tablets with me being a part of that group.
Click to expand...
Click to collapse
New build is uploaded
lexjay said:
t705 also having boot loop. stucked on samsung logo
Click to expand...
Click to collapse
I will take a look thanks
lexjay said:
t705 also having boot loop. stucked on samsung logo
Click to expand...
Click to collapse
T705 stuck at Samsung Galaxy Tab S logo here too.
Wouldn't call it a boot loop though. It gets there and stays there.
Boot failure.
Running latest TWRP and dirty flashed from CM11.
CZ Eddie said:
T705 stuck at Samsung Galaxy Tab S logo here too.
Wouldn't call it a boot loop though. It gets there and stays there.
Boot failure.
Running latest TWRP and dirty flashed from CM11.
Click to expand...
Click to collapse
Yeah that would be a better description of what it is doing. The latest build continues the same thing on the T800.
No go
Wiped and flashed clean. Stuck at at Tab S screen
I'll try one more time with chagallwifi
I tried T800 yesterday and no boot.
maxal said:
I tried T800 yesterday and no boot.
Click to expand...
Click to collapse
Yep i know working with the guy who got slimlp working on t800 there will be another test build later today (its building now) i will update op with the direct link once it finshes
deadman96385 said:
If someone wants to continue trying to get these working they can i do not have the time to try and blind build these its just to much work without a device in front of me.
Click to expand...
Click to collapse
I appreciate you trying.
I've never built a ROM before but have been wanting to learn for awhile now.
Do the links in your OP contain everything necessary to dev for a T705?
CZ Eddie said:
I appreciate you trying.
I've never built a ROM before but have been wanting to learn for awhile now.
Do the links in your OP contain everything necessary to dev for a T705?
Click to expand...
Click to collapse
Yes you have the device tree, you have my kernel which supports t705 and you have vendor files in the dependencies of the device tree
New T800 build in the op
Last build works on chagallwifi
View attachment 3367915
deadman96385 said:
Currently T705 is the only device that does not boot, if someone with the device would like to try the liquified device tree is there i think its because i generated a bad defconfig but i can not find a working defconfig so i do not have much choice.
Kernel Source: https://github.com/LiquidSmooth-Devices/android_kernel_samsung_klimtwifi
T705 Device Tree: https://github.com/LiquidSmooth-Devices/android_device_samsung_klimtlte
T705 Download: Does not work
T800 Download: See main thread (Official build there)
T805 Download: See main thread (Official build there)
Click to expand...
Click to collapse
My newest build for the t705 BlissPop is working, deadmann you can contact me if you would
hiowa93 said:
My newest build for the t705 BlissPop is working, deadmann you can contact me if you would
Click to expand...
Click to collapse
Is link in OP if so I will download now and try it out
Sent from my Xperia Z1 using Tapatalk
danny19901 said:
Is link in OP if so I will download now and try it out
Sent from my Xperia Z1 using Tapatalk
Click to expand...
Click to collapse
Link is not in the OP it is in my thread Here or on my Download page Here
Related
Just a litle addition for CAF roms
Credits:
@makers_mark for his awesome tool
codeaurora for their logo
VectorMagic for vectorizing CAF logo
To install:
Code:
fastboot flash LOGO caf.logo.bin
https://yadi.sk/d/ubwDDptwjBzXA
Flashable zip by @katinatez
https://www.androidfilehost.com/?fid=24052804347824546
Does this helps with WiFi calling?
http://review.cyanogenmod.org/#/c/108311/
http://review.cyanogenmod.org/#/c/108326/
gugas123 said:
Does this helps with WiFi calling?
http://review.cyanogenmod.org/#/c/108311/
http://review.cyanogenmod.org/#/c/108326/
Click to expand...
Click to collapse
I can make logo with "WiFi Calling" text, if it will be helpfull
CraZY_BoY^ said:
I can make logo with "WiFi Calling" text, if it will be helpfull
Click to expand...
Click to collapse
Awesome!
Is this lollipop compatible? I was looking for a new bootlogo, and noticed that some threads say if it's flashed on lollipop it'll brick, so wanted to be sure.
Also, I think what he meant by wifi calling text was something like this.
http://forum.xda-developers.com/oneplus-one/themes-apps/stock-stock-logo-bin-images-t2965717
kdb424 said:
Is this lollipop compatible? I was looking for a new bootlogo, and noticed that some threads say if it's flashed on lollipop it'll brick, so wanted to be sure.
Also, I think what he meant by wifi calling text was something like this.
http://forum.xda-developers.com/oneplus-one/themes-apps/stock-stock-logo-bin-images-t2965717
Click to expand...
Click to collapse
No, it works. Tested on 5.1
---
It was a joke
Nice looking, I like it!! Running my own caf build. Think I will install it.
what about 5.1.1 cm12.1
Bradl79 said:
what about 5.1.1 cm12.1
Click to expand...
Click to collapse
Yes
@CraZY_BoY^
Does this work on CM13 ?
laura almeida said:
@CraZY_BoY^
Does this work on CM13 ?
Click to expand...
Click to collapse
Why not, it's just a logo
CraZY_BoY^ said:
Just a litle addition for CAF roms
Credits:
@makers_mark for his awesome tool
codeaurora for their logo
VectorMagic for vectorizing CAF logo
To install:
Code:
fastboot flash LOGO caf.logo.bin
https://yadi.sk/d/ubwDDptwjBzXA
Flashable zip by @katinatez
https://www.androidfilehost.com/?fid=24052804347824546
Click to expand...
Click to collapse
Hey this is really awesome ! Can you make one more please :fingers-crossed:
If you've ever used 4.4.4 XNPH44S you'd recall the old cyanogen boot animation, the thing is that guys have ported the bootanimation but the logo is different on roms > 5.xx thus the transition from logo to bootanim looks odd, so can you please make one logo with old xnph44s starting screen (image). it'll be a great help, and if not, can you tell me the location from where I can extract the logo, I have a zip of 4.4.4 .
Aakashxcvi said:
Hey this is really awesome ! Can you make one more please :fingers-crossed:
If you've ever used 4.4.4 XNPH44S you'd recall the old cyanogen boot animation, the thing is that guys have ported the bootanimation but the logo is different on roms > 5.xx thus the transition from logo to bootanim looks odd, so can you please make one logo with old xnph44s starting screen (image). it'll be a great help, and if not, can you tell me the location from where I can extract the logo, I have a zip of 4.4.4 .
Click to expand...
Click to collapse
If u know a little how to use photosop, it will be easy
Find a firmware update zip from 4.4 with old logo, unpack it, edit image, repack, thats all
TWRP 3.0.2-0 is out now for all currently supported devices.
What’s new in 3.0.2-0:
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
Add Greek translation to some builds.
TWRP 3.0.2.0 for sprout4 (Tested on Karbonn Sparkle V)
Download link: https://drive.google.com/file/d/0By0nqyW_a9Bsbm1lWGwzcHk0Tk0/view?usp=sharing
Mirror link: https://mega.nz/#!BZVz0RRA!zL96iTDs1mrNAx5epoi9xNt1HIOU2b1PbVRHKPsQpn8
hello, will this work with sprout 8 too?
johngare said:
hello, will this work with sprout 8 too?
Click to expand...
Click to collapse
I tested on only on sprout4 (Karbonn Sparkle V). If they work on same kernel, it should boot up, otherwise it won't.
Marius (TMT) said:
I tested on only on sprout4 (Karbonn Sparkle V). If they work on same kernel, it should boot up, otherwise it won't.
Click to expand...
Click to collapse
I am looking for a tester for my builds of the recovery (TWRP says they need a new maintainer for sprout). Anyone on board?
MSF Jarvis said:
I am looking for a tester for my builds of the recovery (TWRP says they need a new maintainer for sprout). Anyone on board?
Click to expand...
Click to collapse
Count me in.
KcLKcL said:
Count me in.
Click to expand...
Click to collapse
Counted. Stay tuned.
Thanks for update. Working great on my canvas A1.
rajputmiles said:
Thanks for update. Working great on my canvas A1.
Click to expand...
Click to collapse
KcLKcL said:
Count me in.
Click to expand...
Click to collapse
Here is the source-built TWRP 3.0.2-0 recovery for sprout(4|8) devices. Test everything out and then we can make it official.
Cheers,
Jarvis
MSF Jarvis said:
Here is the source-built TWRP 3.0.2-0 recovery for sprout(4|8) devices. Test everything out and then we can make it official.
Cheers,
Jarvis
Click to expand...
Click to collapse
Downloading... Will report tomorrow.
Edit: sorry didn't know you have to submit reports today.
rajputmiles said:
Downloading... Will report tomorrow.
Click to expand...
Click to collapse
TOMORROW!! Oh, Come on, I've got to submit the device tree to @Dees_Troy tonight to get it official.
MSF Jarvis said:
TOMORROW!! Oh, Come on, I've got to submit the device tree to @Dees_Troy tonight to get it official.
Click to expand...
Click to collapse
Okay report within 3 hours
rajputmiles said:
Okay 3 hours.
Click to expand...
Click to collapse
It's just a recovery! Make a backup, restore it, Flash a ROM and then say it works. Actually, if it boots up, I can assume it will work completely. At least help me with that. It's for YOUR benefit. I don't even have the device!
MSF Jarvis said:
It's just a recovery! Make a backup, restore it, Flash a ROM and then say it works. Actually, if it boots up, I can assume it will work completely. At least help me with that. It's for YOUR benefit. I don't even have the device!
Click to expand...
Click to collapse
Okay first of all thanks for your work for this device tree. It's just I was busy in something. And I know what it is to test a recovery.
Report :
Recovery img doesn't get boot up(tried via fastboot & flashify too). I tried rebooting to recovery like 3 times & Black screen comes for like 2 seconds and then it automatic reboots the system -->> starts the rom.
MSF Jarvis said:
Here is the source-built TWRP 3.0.2-0 recovery for sprout(4|8) devices. Test everything out and then we can make it official.
Cheers,
Jarvis
Click to expand...
Click to collapse
Unfortunately , I am sorry to tell source-built twrp 3.0.2-0 did not boot up.... (flased via fastboot...but it won't get into recovery.....just reboots system...). I am back on my ported twrp 3.0.2-0.
rajputmiles said:
Okay first of all thanks for your work for this device tree. It's just I was busy in something. And I know what it is to test a recovery.
Report :
Recovery img doesn't get boot up(tried via fastboot & flashify too). I tried rebooting to recovery like 3 times & Black screen comes for like 2 seconds and then it automatic reboots the system -->> starts the rom.
Click to expand...
Click to collapse
Marius (TMT) said:
Unfortunately , I am sorry to tell source-built twrp 3.0.2-0 did not boot up.... (flased via fastboot...but it won't get into recovery.....just reboots system...). I am back on my ported twrp 3.0.2-0.
Click to expand...
Click to collapse
So apparently @varun.chitre15's ThunderZap kernel doesn't like being used for TWRP. I'll try with AOSP source.
---------- Post added at 11:16 PM ---------- Previous post was at 10:35 PM ----------
rajputmiles said:
Okay first of all thanks for your work for this device tree. It's just I was busy in something. And I know what it is to test a recovery.
Report :
Recovery img doesn't get boot up(tried via fastboot & flashify too). I tried rebooting to recovery like 3 times & Black screen comes for like 2 seconds and then it automatic reboots the system -->> starts the rom.
Click to expand...
Click to collapse
Marius (TMT) said:
Unfortunately , I am sorry to tell source-built twrp 3.0.2-0 did not boot up.... (flased via fastboot...but it won't get into recovery.....just reboots system...). I am back on my ported twrp 3.0.2-0.
Click to expand...
Click to collapse
Another test build.
:fingers-crossed:
MSF Jarvis said:
So apparently @varun.chitre15's ThunderZap kernel doesn't like being used for TWRP. I'll try with AOSP source.
---------- Post added at 11:16 PM ---------- Previous post was at 10:35 PM ----------
Another test build.
:fingers-crossed:
Click to expand...
Click to collapse
Still no luck. Same problem. Not booting up.
rajputmiles said:
Still no luck. Same problem. Not booting up.
Click to expand...
Click to collapse
****in' final test build. If this doesn't boot, I'll go off TWRP compiling for two weeks
MSF Jarvis said:
****in' final test build. If this doesn't boot, I'll go off TWRP compiling for two weeks
Click to expand...
Click to collapse
Nope. It does not seems to boot up. Only black screen, then it reboots in android os.
MSF Jarvis said:
****in' final test build. If this doesn't boot, I'll go off TWRP compiling for two weeks
Click to expand...
Click to collapse
Still same. Recovery not booting up.
Black screen for 2 second-->> reboots into rom.
One more thing what is meant by "ThunderZap kernel doesn't like being used for TWRP". Cause cyanogen mod kernel is coming with cm snapshot release 1.
rajputmiles said:
Still same. Recovery not booting up.
Black screen for 2 second-->> reboots into rom.
One more thing what is meant by "ThunderZap kernel doesn't like being used for TWRP". Cause cyanogen mod kernel is coming with cm snapshot release 1.
Click to expand...
Click to collapse
Recovery is just a ramdisk put together with a kernel zImage. I used TZ5.2 zImage first time.
Your recovery boots, right? I'll try with your zImage, though would you mind telling me which zImage are you using ?
Now This TWRP is OFFICIAL download here.
http://forum.xda-developers.com/hot-2/orig-development/official-twrp-infinix-hot-2-t3394980
@Nonta72 try this out and see if this helps.
Please use
Code:
[URL][/URL]
for the link, the link is untouchable in every devices.
RendyAK said:
Please use for the link, the link is untouchable in every devices.
Click to expand...
Click to collapse
Ahh, he's not on XDA Labs I think, it auto adds the URL tags now
Sent from my Pixel V1 using XDA Labs
touchable links added.
Recovery doesn't boot. Send phone to infinite loop of boot logo only.
AonSyed said:
Recovery doesn't boot. Send phone to infinite loop of boot logo only.
Click to expand...
Click to collapse
ohhh, will work on new build.
HostZero said:
ohhh, will work on new build.
Click to expand...
Click to collapse
Check the one being built by MSF-Jarvis in the HOT 2 Original Android Development. That one also doesn't boot yet.
i am going to download omni-5.1 repo and then you will have fine boot.
HostZero said:
i am going to download omni-5.1 repo and then you will have fine boot.
Click to expand...
Click to collapse
Add
Code:
--reference=path/to/any/older/synced/sources
when doing repo init to greatly reduce download size
Sent from my Pixel V1 using XDA Labs
Here by new build 3.0.2-1 is out, try that out!
based on omni-5.1 sources
merged with cm-12.1 "nonta branch"
HostZero said:
Here by new build 3.0.2-1 is out, try that out!
based on omni-5.1 sources
merged with cm-12.1 "nonta branch"
Click to expand...
Click to collapse
New build is working
@MikeChannon kindly move it to original dev section
AonSyed said:
...
@MikeChannon kindly move it to original dev section
Click to expand...
Click to collapse
That's a decision for the Forum Moderators for this forum. You need to ask one of them. They are:
vanessaem
snickler
Perseus
jackeagle
OfficerJimLahey
Heisenberg
Droidriven
Mike
MikeChannon said:
Mike
Click to expand...
Click to collapse
HostZero said:
Here by new build 3.0.2-1 is out, try that out!
based on omni-5.1 sources
merged with cm-12.1 "nonta branch"
Click to expand...
Click to collapse
Wow!
The legend commented on your post @HostZero !
This is awesome!
Well done by the way. I hope you can make a CM13 for us soon. And maybe you should compile Omni before that. It's my favorite.
I made the sources but my laptop is TOO SLOW for compiling haahhh
PS: Do push changes to your tree, I will update mine accordingly.
Nonta72 said:
Wow!
The legend commented on your post @HostZero !
This is awesome!
Well done by the way. I hope you can make a CM13 for us soon. And maybe you should compile Omni before that. It's my favorite.
I made the sources but my laptop is TOO SLOW for compiling haahhh
PS: Do push changes to your tree, I will update mine accordingly.
Click to expand...
Click to collapse
Agreed
Well done!
Whooo, Its working! OMG. Thank you Legend Mike. Where as I am even working on TWRP (Hennessey) actually I had received reply from bigbiff but. He has compiled it using omni 6.0 sources I have requested for rebuild once he rebuilds with 5.1 sources, I will take over Hennessey and make Infinix TWRP OFFICIAL
CM13 is Impossible for me, mostly UNOFFICIAL/OFFICIAL would be take overed by MSF Jarvis. Where as we also require 3.10.x kernel sources to compile CM13.
New FINAL-STABLE build OUT!
3.0.2-2
HostZero said:
CM13 is Impossible for me, mostly UNOFFICIAL/OFFICIAL would be take overed by MSF Jarvis. Where as we also require 3.10.x kernel sources to compile CM13.
Click to expand...
Click to collapse
Excuse me ...
Can't we just use one of the prebuilt kernel binaries from either 5.1 or 6.0 ?
Or CM13 forcibly requires kernel sources ?
Nonta72 said:
Excuse me ...
Can't we just use one of the prebuilt kernel binaries from either 5.1 or 6.0 ?
Or CM13 forcibly requires kernel sources ?
Click to expand...
Click to collapse
Redmi note 3 (hennessy) developer of cyanogenmod 12.1
I have contacted him for cm-13.0, he has replied my that "I have compiled TWRP but it didn't boot because
1. it lacks the kernel source
2. I can use prebuilt-kernel as i did for cm-12.1 but i need 3.10.x."
and i didn't even compile ROM for any device, because i always failed when i do i will also do for infinix too.
finally cm-13.0 requires kernel source. it thinks compile kernel using cm patches will lead to boot rom instead of using pre-built.
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
I have found out how to make this ROM boot, use @Android-Andi's kernel, https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/kernel-anykernel-t3484739
Known issues:
1.) Some lag
2.) SystemUI crashes after clearing all running apps on recent app switcher
3.) Camera app don't show
4.) Some things are missing from settings / sounds
5.) Some sounds are missing
secretwolf98 said:
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
Click to expand...
Click to collapse
Tested on p3110. After the samsung logo it shows only a black screen and then reboots back to recovery.
secretwolf98 said:
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
Click to expand...
Click to collapse
Here the same, is booting after Samsung logo in Recovery, installed with P5110.
As soon as I get back from holidays I can finally try the new 7.1.2 (I do not have wi-fi coverage). One question: Which Gapss is recommended?
ginore said:
As soon as I get back from holidays I can finally try the new 7.1.2 (I do not have wi-fi coverage). One question: Which Gapss is recommended?
Click to expand...
Click to collapse
7.1
john99ap said:
Tested on p3110. After the samsung logo it shows only a black screen and then reboots back to recovery.
Click to expand...
Click to collapse
Does anyone know how to fix this issue?
jori55 said:
Here the same, is booting after Samsung logo in Recovery, installed with P5110.
Click to expand...
Click to collapse
Does anyone know how to fix this issue?
secretwolf98 said:
Does anyone know how to fix this issue?
Click to expand...
Click to collapse
No
john99ap said:
No
Click to expand...
Click to collapse
I will try to look into this. I hope a next build will be out today or so.
john99ap said:
No
Click to expand...
Click to collapse
Kernel got corrupted. I will have this problem resolved soon!
I understand...
Porting ROMs is hell!
secretwolf98 said:
Kernel got corrupted. I will have this problem resolved soon!
Click to expand...
Click to collapse
testet with Anykernel and it seems to be all right on my p5110.
jori55 said:
testet with Anykernel and it seems to be all right on my p5110.
Click to expand...
Click to collapse
Did it go into the system?
Before we'll see bricked devices here, and also i am sure again there's a rom used as base people don't have the permissions for (yes, also for official roms you need to ask for permissions)
https://www.androidfilehost.com/?fid=961840155545572626 & https://www.androidfilehost.com/?fid=817550096634769278,
please someone fix the RIL on espresso3g - i won't do it.
And while on it:
https://www.androidfilehost.com/?fid=817550096634790962
https://www.androidfilehost.com/?fid=673368273298976929
There have been reasons not releasing any other roms yet, but people can't be patient...
i'd like to have ril fixed first, but be happy with a buggy RIL versions.
First boot takes a while, wait some minutes before you start Gapps Setupwizard, else it might crash.
And please DON'T report any bugs - i am not interested on it.
And before i foget:
Take some of your money now and make a small donation to a charity of your choice!
Edit:
No, I don't allow to use any of my work or official ROMs I maintain (official Slim, Omni, CM, Lineage and Unlegacy Android) to use as base for a port!
Every use for romporting will be reported to the moderators immediately!
Reuploading also isn't allowed and will cause legal consequences!
A shame that those trolls have been that rude to you, that you closed down the LineageOS thread @Android-Andi. I'm sorry for what they did, cause you definitely didn't deserve to be treated in such a manor. On the contrary you deserve to be carried on our hands by the whole community. Thanks again for everything you did to hold our Tab2 alive.
Thanks for sharing! Will stay on LineageOS 13 for the time being though.
Sent from my HTC U11 using XDA Labs
secretwolf98 said:
Did it go into the system?
Click to expand...
Click to collapse
Yes, see screenshot.
Installed your build, installed gapps, installed AnyKernel-2017-07-09-22-11-espresso.zip, then reboot.
jori55 said:
Yes, see screenshot.
Installed your build, installed gapps, installed AnyKernel-2017-07-09-22-11-espresso.zip, then reboot.
Click to expand...
Click to collapse
Will it work for GT-P3113, the kernel? I saw that kernel on XDA for 5xx, but I don't know if other tab 2 models are supported.
Sorry new to making ROMs for Tab 2, I make ROMs for tab 4.
Android-Andi said:
Before we'll see bricked devices here, and also i am sure again there's a rom used as base people don't have the permissions for (yes, also for official roms you need to ask for permissions)
https://www.androidfilehost.com/?fid=961840155545572626 & https://www.androidfilehost.com/?fid=817550096634769278,
please someone fix the RIL on espresso3g - i won't do it.
And while on it:
https://www.androidfilehost.com/?fid=817550096634790962
https://www.androidfilehost.com/?fid=673368273298976929
There have been reasons not releasing any other roms yet, but people can't be patient...
i'd like to have ril fixed first, but be happy with a buggy RIL versions.
First boot takes a while, wait some minutes before you start Gapps Setupwizard, else it might crash.
And please DON'T report any bugs - i am not interested on it.
And before i foget:
Take some of your money now and make a small donation to a charity of your choice!
Edit:
No, I don't allow to use any of my work or official ROMs I maintain (official Slim, Omni, CM, Lineage and Unlegacy Android) to use as base for a port!
Every use for romporting will be reported to the moderators immediately!
Reuploading also isn't allowed and will cause legal consequences!
Click to expand...
Click to collapse
This ROM in my post is compiled from https://wiki.lineageos.org/devices/espressowifi/build, and LineageOS 14.1 sources on GitHub.
secretwolf98 said:
This ROM in my post is compiled from https://wiki.lineageos.org/devices/espressowifi/build, and LineageOS 14.1 sources on GitHub.
Click to expand...
Click to collapse
Ok, sry have seen my "porting friend" posting here and thought it's a port too because nothing's mentioned in OP.
I'll PM you next days or you can contact me on Hangouts (I am sure you'll find out how to find me)
Android-Andi said:
Ok, sry have seen my "porting friend" posting here and thought it's a port too because nothing's mentioned in OP.
I'll PM you next days or you can contact me on Hangouts (I am sure you'll find out how to find me)
Click to expand...
Click to collapse
That's alight.
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!
Installing is usual - MAKE A BACKUP OF YOUR OLD ROM, Wipe, Install the new zip. GApps are included Out-of-the-Box.
After installing:
1. Tell if it boots
If it doesn't: say what SKU is your phone (for example mine is XT1441)
2. Tell us what works and what doesn't
3. If at least calling works and Wi-Fi works, you can try using it as a daily driver. Tell us how battery goes.
Do all that in the "Reviews" tab on the top of this thread.
I'm going to try it out, too. And I'm going to tell you what happened.
Download the ROM through the "Downloads" tab.
==================================================
UPDATE: Base Android changed to Marshmallow by requests from this thread and for better compatibility.
XDA:DevDB Information
MIUI9, ROM for the Moto G 2015
Contributors
nicolasmart, jhenrique09, CyanogenMod (formely Lineage)
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-10-26
Last Updated 2017-10-29
Reserved
Changelog:
2017.10.29 - Test4 (Lollipop):
* Reverted base to Lollipop. Looks like even Mi 4 isn't compatible with our device. I'm going to upgrade back to Marshmallow or Nougat when official MIUI 9 comes out.
* We have some progress - the kernel now works and the phone starts booting. It hangs on the boot animation. Please send logcats. I will look through mine, too.
2017.10.28 - Test3 (Marshmallow):
* Switched base to Marshmallow
* Also not booting because of the wrong architecture.
2017.10.26 - Test2 (Lollipop):
* Flashing but not booting
2017.10.26 - Test1 (Lollipop):
* Initial Release
* Not flashing
Does Gapps are included or have to download seperately and if seperately then which one?
Apurba99 said:
Does Gapps are included or have to download seperately and if seperately then which one?
Click to expand...
Click to collapse
GApps are included out of the box, so don't worry about that. Again, don't plan to use this as a daily driver. Just test it and tell if it works.
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone ?
Apurba99 said:
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone
Click to expand...
Click to collapse
Don't worry! It won't hard brick it. You will just need to reflash your ROM with something stable, like Lineage OS, for example.
Ok then, I'll flash it ASAP
It will be nice if there is marshmallow or Nougat.
Flashing it ASAP :good:
mg_jishad said:
It will be nice if there is marshmallow or Nougat.
Click to expand...
Click to collapse
I'm sorry. In MIUI it doesn't matter that much what Android version are you running. And I don't think Lollipop is obsolete. I just chose it because Redmi 2 runs our chipset and it's the easiest device to port from.
UPDATE: Zip File doesn't flash. Will fix ASAP.
Flashed but Stuck on boot logo .. Waited for around 10mins.
nicolasmart said:
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!:
Click to expand...
Click to collapse
Flashed but dont pass on boot logo
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Great
rahul9999 said:
Great
Click to expand...
Click to collapse
Can you try it out, please? My phone is currently not with me.
nicolasmart said:
Can you try it out, please? My phone is currently not with me.
Click to expand...
Click to collapse
I would like to be test this but as i don't want to switch any ROM for sometime.. will let you know if possible for me to test
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Where is the download tab?
Hunimix said:
Where is the download tab?
Click to expand...
Click to collapse
Use this link: #Download tab
...or just look at the top of this thread.
nicolasmart said:
Use this link: #Download tab
...or just look at the top of this thread.
Click to expand...
Click to collapse
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Hunimix said:
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Click to expand...
Click to collapse
Hmmm... interesting... I should put the downloads tab link in the first post then.