You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!
Installing is usual - MAKE A BACKUP OF YOUR OLD ROM, Wipe, Install the new zip. GApps are included Out-of-the-Box.
After installing:
1. Tell if it boots
If it doesn't: say what SKU is your phone (for example mine is XT1441)
2. Tell us what works and what doesn't
3. If at least calling works and Wi-Fi works, you can try using it as a daily driver. Tell us how battery goes.
Do all that in the "Reviews" tab on the top of this thread.
I'm going to try it out, too. And I'm going to tell you what happened.
Download the ROM through the "Downloads" tab.
==================================================
UPDATE: Base Android changed to Marshmallow by requests from this thread and for better compatibility.
XDA:DevDB Information
MIUI9, ROM for the Moto G 2015
Contributors
nicolasmart, jhenrique09, CyanogenMod (formely Lineage)
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-10-26
Last Updated 2017-10-29
Reserved
Changelog:
2017.10.29 - Test4 (Lollipop):
* Reverted base to Lollipop. Looks like even Mi 4 isn't compatible with our device. I'm going to upgrade back to Marshmallow or Nougat when official MIUI 9 comes out.
* We have some progress - the kernel now works and the phone starts booting. It hangs on the boot animation. Please send logcats. I will look through mine, too.
2017.10.28 - Test3 (Marshmallow):
* Switched base to Marshmallow
* Also not booting because of the wrong architecture.
2017.10.26 - Test2 (Lollipop):
* Flashing but not booting
2017.10.26 - Test1 (Lollipop):
* Initial Release
* Not flashing
Does Gapps are included or have to download seperately and if seperately then which one?
Apurba99 said:
Does Gapps are included or have to download seperately and if seperately then which one?
Click to expand...
Click to collapse
GApps are included out of the box, so don't worry about that. Again, don't plan to use this as a daily driver. Just test it and tell if it works.
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone ?
Apurba99 said:
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone
Click to expand...
Click to collapse
Don't worry! It won't hard brick it. You will just need to reflash your ROM with something stable, like Lineage OS, for example.
Ok then, I'll flash it ASAP
It will be nice if there is marshmallow or Nougat.
Flashing it ASAP :good:
mg_jishad said:
It will be nice if there is marshmallow or Nougat.
Click to expand...
Click to collapse
I'm sorry. In MIUI it doesn't matter that much what Android version are you running. And I don't think Lollipop is obsolete. I just chose it because Redmi 2 runs our chipset and it's the easiest device to port from.
UPDATE: Zip File doesn't flash. Will fix ASAP.
Flashed but Stuck on boot logo .. Waited for around 10mins.
nicolasmart said:
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!:
Click to expand...
Click to collapse
Flashed but dont pass on boot logo
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Great
rahul9999 said:
Great
Click to expand...
Click to collapse
Can you try it out, please? My phone is currently not with me.
nicolasmart said:
Can you try it out, please? My phone is currently not with me.
Click to expand...
Click to collapse
I would like to be test this but as i don't want to switch any ROM for sometime.. will let you know if possible for me to test
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Where is the download tab?
Hunimix said:
Where is the download tab?
Click to expand...
Click to collapse
Use this link: #Download tab
...or just look at the top of this thread.
nicolasmart said:
Use this link: #Download tab
...or just look at the top of this thread.
Click to expand...
Click to collapse
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Hunimix said:
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Click to expand...
Click to collapse
Hmmm... interesting... I should put the downloads tab link in the first post then.
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
We build this ROM using Mokee android source and tomato aka YU Yureka's source.
We are not the developer of this ROM. We just build this ROM with few bug fixes.
This ROM does not have gapps (Google Play Strore & other google goodies). But you can download & install it from http://wiki.cyanogenmod.org/w/Google_Apps
Note: After install do not uncheck chinese keyboard & please install gapps which contains google keyboard & then update google keyboard using PlayStore.
Otherwise you will get GoogleKeyboard FC error
Prerequists: YU should be on stock rom.
Use the recovery.img linked here. Otherwise chances of installation error due to device name missmatch.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
ROM Download:
MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB
OLD:
ROM: MK44.4-tomato-201503040513-UNOFFICIAL.zip - 231.67 MB Bugs like FC on Display&Lights
Philz Recovery: philz_recovery.img - 8.54 MB
Recovery: recovery.img - 8.20 MB
gapps: gapps-kk-20140606-signed.zip
Installation:
First flash above recovery image file (CWM recovery). Do use this reovery image file or you'll get error.
Code:
sudo fastboot -i 0x1ebf flash recovery recovery.img
Now boot to this CWM recovery.
FactoryReset/ Clear Data. Clear Cache.
Install MK44.4-tomato-201503XXXXXX-UNOFFICIAL.zip (ROM file) from sdcard.
Reboot system & enjoy Mokee ROM.
If needed download & flash gapps also.
Tested following all are working...
WiFi, voice, Camera, Notification LED, SIM Setting from dialer.
BUG:
Settings->DisplayLights gives FC. Solved
XDA:DevDB Information
Mokee ROM for Yureka, ROM for the YU Yureka
Contributors
dumtara, sooorajjj
Source Code: https://github.com/YU-YUREKA/local_manifests/tree/kk_mkt
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: Mokee
Version Information
Status: Beta
Created 2015-03-04
Last Updated 2015-03-12
Reserved
Review:
PRRash said:
Cant get the back key to work both with onscreen and hardware. However long press to kill app works fine. Anyone else with this ?? i did a clean install.
Edit: Also the default google keyboard does not work on start. I'm on latest pa gapps, never had this issue before.
Edit2: This is weird, i reinstalled the rom and this time i did not select onscreen keys and did not select the default input. The back key works and a default keyboard(some chinese name in "Language & input" setting) comes up. If i keep this keyboard as default, everything works fine, but the moment i change the default to google keyboard, my back key stops working & keyboard does not come up.
Edit3: I read your previous post, updating the google keyboard does the trick. Rom is smooth and fast. Thank you man @dumtara
Click to expand...
Click to collapse
SWAP3093 said:
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0
Click to expand...
Click to collapse
SumiT1995 said:
raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Click to expand...
Click to collapse
yes, same here...
Click to expand...
Click to collapse
suhas.holla said:
Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA
Click to expand...
Click to collapse
aniketh12 said:
.....
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable
Click to expand...
Click to collapse
SumiT1995 said:
flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...
Click to expand...
Click to collapse
link added now.
This is a test RC build. You may get some FC issue.
Please report ERROR here , we will try to fix it.
Nice work mate
Trying your CM rom.
Will try mokee next.
Dev @dumtara man you are a blaze. CM,Carbon with updated versions n now mokee.
Take your time breathe some fresh air dev
RajGopi said:
Trying your CM rom.
Take your time breathe some fresh air dev
Click to expand...
Click to collapse
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:
dumtara said:
Badly needed this..... thanks for suggestion
Few days leave now..... Happy Holi. :highfive:
Click to expand...
Click to collapse
Happy holi to YU too dev.
-Good News -
Display & Lights FC issue has been solved now.
Updated ROM will be uploaded soon. :victory:
-edit=
Link added MK44.4-tomato-201503052344-UNOFFICIAL.zip - 231.67 MB
Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??
pkprasanna said:
Also list what features MoKee open source have in OP.
I googled but i am confused does it support themes like miui or not ??
Click to expand...
Click to collapse
Check the screenshots
Awesome .. One of my favourite ROM. Its the most stable ROM that i have found.
Thanks for bringing this to YUREKA
Hey Dumatra,
Kudos for all the development you are doing for Yureka.
But one request. Can u please stop adding assert statement in the updater script. or atleast add another check along with Yureka and Tomato.
whenever i wanna flash your kernel or any rom i need to be on stock rom, which is not the case.
And i know its very simple to edit the updater script and remove the assert statement. But i dont have a laptop right now and no PC other than the office one. So i cant edit the updater file when i want. Its causing a small prob.
But i do understand the risk of some noobs flashing wrong file on wrong device. But just think abt what you can do, to address this. Another check with tomato or AO5510 along with Yureka would be fine. or if you are ok, you can remove the whole assert statement and mention clearly in your thread as "this is only for yureka and not for coolpad or any clones"
and thanks for so many roms. till date i have found you CM11 to be very fluid smooth and stable
^^^^
Use the recovery provided by me.
There are CWM and Phil recovery provided. Use any one of them. And you won't face this issue.
flashed the rom,, really nice and smooth, did not find any bugs.... thnx for this nice rom dev...
Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks
raman_ said:
Nice Rom its smooth and fast but its not having keyboard and only hardware home key is working. Please provide the patch or update.
Thanks
Click to expand...
Click to collapse
you might have choosen the google keyboard and disabled the other keyboard.
flash latest gapps (link at OP) and update google keyboard from playstore.
keyboard & all 3 hardware key will work then.
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium
raman_ said:
Does anyone facing media scanning issue? Downloaded images dont automatically refreshes in gallery.....
Sent from my AO5510 using xda premium
Click to expand...
Click to collapse
yes, same here...
Good News...TWRP works
I Have TWRP recovery in my Yureka....this ROM can also flashed via TWRP recovery also...didn't faced any issue at all...I am on TWRP 2.8.5.0
The rom is done 80%, it boots, but I need someone to test it with his phone too to be 100% that everything is working.
EMUI VERSION
ABANDONED PROJECT
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES OF THE ROM
-New boot UI(but I don't know if this will be in final version)
-Bloatware removed
-Proffesional camera app; light painting and that stuff added
-Google Now Launcher(because emui=ugly) and kernel adiutor added(but NO ROOT, because I know about the Snapchat problem) TIP: TO MAKE SNAPCHAT WORKING INSTALL SNAPCHAT, LOG IN, THEN REBOOT AND INSTALL ROOT
-Advanced Reboot
What is not working:
-Wifi(sees all networks but when I try to connect it fails and says: The connection to"network" has expired. The connection has failed.
-I have a problem with Huawei Swype Keyboard. At first boot when I try to type something the keyboard doesn't show. After skipping everything in first boot of the os you need to go to -Settings-Advanced Settings-Language and tiping methods-There you press on Default Keyboard, then select Google Keyboard or how it's named, I forgot.
-Bluetooth- same problem as wifi; maybe even worse, whe you press on Activate bluetooth, after 10 seconds it goes off again.
I have not tested everything because at the same time I am working and on The CyanogenMod 12.1 EmuiMix. This is the Modded Emui EmuiMix.
I do not not when I will release the CyanogenMod EmuiMix, I'm kinda mad that I need to fix the Wifi and Bluetooth, and on CM I need to fix A LOT
DOWNLOAD:
Here is the link: https://drive.google.com/open?id=0B-...3dUeHNjYVNxWUU . If it doesn't work, tell me.
INSTRUNCTIONS - READ VERY CAREFULLY!
1.Download zip from the link
2.Hold power+vol up+ vol down to get into TWRP
3.Click on "Wipe" and slide to wipe the system ---------Normal wipe doesn't wipe all data(music,photos...) just some cache what is part of the system
4.Click on install and choose the zip
5.(alert)--DO NOT INSTALL GAPPS AFTER INSTALLATION OF ROM!!! , JUST INSTALL IT AFTER FIRST BOOT SETUP, OTHERWISE THE ROM WILL BREAK!
6.Reboot your phone- ALERT- First boot might take a while, somewhere between 10-15 minutes, just wait, do not panic.
7.Set up your phone how you can; how I said in the problems of this rom is that the keyboard isn't showing= you cannot connect to wifi(but wifi doesn't even work), cannot connect with Google(but if wifi doesn't work I don't know if you can connect with mobile data; so just skip it)
8. After setup, go to -Settings -Advanced Settings -Language and tiping methods -There you press on Default Keyboard, then select Google Keyboard or how it's named, I forgot.
9.(optional). After setup, now you can install Gapps. Go to http://opengapps.org/ , and be sure to download ARM64-6.0- AND CHOOSE Micro, Mini or Full, just these three will work. But installing this package erases old gapps, including google keyboard. Be sure to have in your phone a keyboard .apk because you will have no keyboard.
Again, do not blame me for bricking your phone, losing data, etc SO PLEASE READ THE INSTRUCTIONS CAREFULLY!
If you can help me with fixing the remaining bugs, I would appreciate that A LOT.
I will let a screenshot of the ROM, too.
If you have any questions, please reply to this thread.
Code:
Changelog:
28.03.2017:
-Initial Build
P.S. - I used Omnirom 5.1 files for installing in TWRP, because stock HW roms are made in UPDATE.APP format, maybe I will do a custom one at a time
So don't panic if it says in TWRP "OMNI" and "Enjoy Omnirom!" because it is not Omnirom.
XDA:DevDB Information
[ROM] [UNOFFICIAL] EmuiMix for Kirin Huawei ALE-L21, ROM for the Huawei P8lite/P8 Lite
Contributors
hi6120sft ale-l21
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod 12.1 and EMUI
Version Information
Status: Abandoned
Beta Release Date: 2017-03-30
Created 2017-03-26
Last Updated 2017-03-30
Be careful, placeholder threads aren't accepted on development
Edit: But still, sound pretty interesting
Based on CyanogenMod 12.1? Or emui? Confused lol.. any bit of information on what you're working on? ?
D1stRU3T0R said:
CM12. 1? EMUIMIX? Something is wrong, at least develop on LineAgeOS 14.1, or vase rom with some improvements... Better ideea would be to only help others, like haky and XePealato to build, they have the 2 main roms
Click to expand...
Click to collapse
Yes, I like the name EMUIMIX for this rom.
Best wishes to you in this
Zizo17 said:
Best wishes to you in this
Click to expand...
Click to collapse
Thx, that means a lot
Good luck! But I've got a small question. Wouldn't it be better to all developers work together? Like we have like 4+ different roms so IMHO it would be better together right? It would make the progress faster... But I'm not a programmer or a professional so pls don't hate me. I'm just curious.
PS: I don't want rushed things etc and I respect you guys (doing stuff for our device)
Thanks
filiplongac said:
Good luck! But I've got a small question. Wouldn't it be better to all developers work together? Like we have like 4+ different roms so IMHO it would be better together right? It would make the progress faster... But I'm not a programmer or a professional so pls don't hate me. I'm just curious.
PS: I don't want rushed things etc and I respect you guys (doing stuff for our device)
Thanks
Click to expand...
Click to collapse
That ACTUALLY would be better, but not all developers want to make a team
These Kirin devices are a headache, not like the snapdragon phones when you can make a stable custom rom in a day.
NEWS:
News: I have found out and a old project of mine based on Emui, what I am going to post it too here
So there will be 2 versions of EmuiMix:
1. Modded Emui(Today I need to make some pathces, less bugs, maybe even release today a beta if I finish my work)
2.CyanogenMod 12.1 (Android 5.1.1, with many bugs; needs a lot of time to fix)
hi6120sft ale-l21 said:
News: I have found out and a old project of mine based on Emui, what I am going to post it too here
So there will be 2 versions of EmuiMix:
1. Modded Emui(Today I need to make some pathces, less bugs, maybe even release today a beta if I finish my work)
2.CyanogenMod 12.1 (Android 5.1.1, with many bugs; needs a lot of time to fix)
Click to expand...
Click to collapse
Why don't you use LineageOs 14.1 repo by XePeleato or AOSP by Haky 89 and help them with fixing bugs?
xdk78 said:
Why don't you use LineageOs 14.1 repo by XePeleato or AOSP by Haky 89 and help them with fixing bugs?
Click to expand...
Click to collapse
Because they're hard. Maybe in the future. I'm just a starter developer
hi6120sft ale-l21 said:
Thx, that means a lot
Click to expand...
Click to collapse
Hats off for your kindness relpy ?
Thread lacks a valid download link. Please PM me with the link, when there is a valid download available and I will reopen the thread. Until then this is a placeholder.
Should you wish, you may post an early Alpha version for the members to test and give feedback.
Thread reopened.
Here is the screenshot:
So simply said, it's a deodexed stock EMUI like one of the Sokobban's ROM or what is the main difference?
Nice work and Good luck m8 !
filiplongac said:
So simply said, it's a deodexed stock EMUI like one of the Sokobban's ROM or what is the main difference?
Nice work and Good luck m8 !
Click to expand...
Click to collapse
Yes, I modded stock Emui.
hi6120sft ale-l21 said:
Yes, I modded stock Emui.
Click to expand...
Click to collapse
And what build was used in this ROM? Or it doesn't matter? Because I think some newer builds have new improvements etc...
filiplongac said:
And what build was used in this ROM? Or it doesn't matter? Because I think some newer builds have new improvements etc...
Click to expand...
Click to collapse
What "build" are you talking about?
If you are talking about what emui, I am using stock EMUI 4.0
.4.1 was also a option for me, but 4.1 doesn't work on all carriers.
hi6120sft ale-l21 said:
Yes, I modded stock Emui.
Click to expand...
Click to collapse
hi6120sft ale-l21 said:
What "build" are you talking about?
If you are talking about what emui, I am using stock EMUI 4.0
.4.1 was also a option for me, but 4.1 doesn't work on all carriers.
Click to expand...
Click to collapse
I meant f.e. B589 etc. Or there isn't any?
filiplongac said:
I meant f.e. B589 etc. Or there isn't any?
Click to expand...
Click to collapse
Ah, I forgot, I got what you try to say. I will tell you tomorrow what build is.
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
I have found out how to make this ROM boot, use @Android-Andi's kernel, https://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/kernel-anykernel-t3484739
Known issues:
1.) Some lag
2.) SystemUI crashes after clearing all running apps on recent app switcher
3.) Camera app don't show
4.) Some things are missing from settings / sounds
5.) Some sounds are missing
secretwolf98 said:
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
Click to expand...
Click to collapse
Tested on p3110. After the samsung logo it shows only a black screen and then reboots back to recovery.
secretwolf98 said:
This ROM is currently in BETA Testing...
Downloads:
8-18-2017: https://www.androidfilehost.com/?fid=673368273298979626
8-18-2017: First BETA Release
Click to expand...
Click to collapse
Here the same, is booting after Samsung logo in Recovery, installed with P5110.
As soon as I get back from holidays I can finally try the new 7.1.2 (I do not have wi-fi coverage). One question: Which Gapss is recommended?
ginore said:
As soon as I get back from holidays I can finally try the new 7.1.2 (I do not have wi-fi coverage). One question: Which Gapss is recommended?
Click to expand...
Click to collapse
7.1
john99ap said:
Tested on p3110. After the samsung logo it shows only a black screen and then reboots back to recovery.
Click to expand...
Click to collapse
Does anyone know how to fix this issue?
jori55 said:
Here the same, is booting after Samsung logo in Recovery, installed with P5110.
Click to expand...
Click to collapse
Does anyone know how to fix this issue?
secretwolf98 said:
Does anyone know how to fix this issue?
Click to expand...
Click to collapse
No
john99ap said:
No
Click to expand...
Click to collapse
I will try to look into this. I hope a next build will be out today or so.
john99ap said:
No
Click to expand...
Click to collapse
Kernel got corrupted. I will have this problem resolved soon!
I understand...
Porting ROMs is hell!
secretwolf98 said:
Kernel got corrupted. I will have this problem resolved soon!
Click to expand...
Click to collapse
testet with Anykernel and it seems to be all right on my p5110.
jori55 said:
testet with Anykernel and it seems to be all right on my p5110.
Click to expand...
Click to collapse
Did it go into the system?
Before we'll see bricked devices here, and also i am sure again there's a rom used as base people don't have the permissions for (yes, also for official roms you need to ask for permissions)
https://www.androidfilehost.com/?fid=961840155545572626 & https://www.androidfilehost.com/?fid=817550096634769278,
please someone fix the RIL on espresso3g - i won't do it.
And while on it:
https://www.androidfilehost.com/?fid=817550096634790962
https://www.androidfilehost.com/?fid=673368273298976929
There have been reasons not releasing any other roms yet, but people can't be patient...
i'd like to have ril fixed first, but be happy with a buggy RIL versions.
First boot takes a while, wait some minutes before you start Gapps Setupwizard, else it might crash.
And please DON'T report any bugs - i am not interested on it.
And before i foget:
Take some of your money now and make a small donation to a charity of your choice!
Edit:
No, I don't allow to use any of my work or official ROMs I maintain (official Slim, Omni, CM, Lineage and Unlegacy Android) to use as base for a port!
Every use for romporting will be reported to the moderators immediately!
Reuploading also isn't allowed and will cause legal consequences!
A shame that those trolls have been that rude to you, that you closed down the LineageOS thread @Android-Andi. I'm sorry for what they did, cause you definitely didn't deserve to be treated in such a manor. On the contrary you deserve to be carried on our hands by the whole community. Thanks again for everything you did to hold our Tab2 alive.
Thanks for sharing! Will stay on LineageOS 13 for the time being though.
Sent from my HTC U11 using XDA Labs
secretwolf98 said:
Did it go into the system?
Click to expand...
Click to collapse
Yes, see screenshot.
Installed your build, installed gapps, installed AnyKernel-2017-07-09-22-11-espresso.zip, then reboot.
jori55 said:
Yes, see screenshot.
Installed your build, installed gapps, installed AnyKernel-2017-07-09-22-11-espresso.zip, then reboot.
Click to expand...
Click to collapse
Will it work for GT-P3113, the kernel? I saw that kernel on XDA for 5xx, but I don't know if other tab 2 models are supported.
Sorry new to making ROMs for Tab 2, I make ROMs for tab 4.
Android-Andi said:
Before we'll see bricked devices here, and also i am sure again there's a rom used as base people don't have the permissions for (yes, also for official roms you need to ask for permissions)
https://www.androidfilehost.com/?fid=961840155545572626 & https://www.androidfilehost.com/?fid=817550096634769278,
please someone fix the RIL on espresso3g - i won't do it.
And while on it:
https://www.androidfilehost.com/?fid=817550096634790962
https://www.androidfilehost.com/?fid=673368273298976929
There have been reasons not releasing any other roms yet, but people can't be patient...
i'd like to have ril fixed first, but be happy with a buggy RIL versions.
First boot takes a while, wait some minutes before you start Gapps Setupwizard, else it might crash.
And please DON'T report any bugs - i am not interested on it.
And before i foget:
Take some of your money now and make a small donation to a charity of your choice!
Edit:
No, I don't allow to use any of my work or official ROMs I maintain (official Slim, Omni, CM, Lineage and Unlegacy Android) to use as base for a port!
Every use for romporting will be reported to the moderators immediately!
Reuploading also isn't allowed and will cause legal consequences!
Click to expand...
Click to collapse
This ROM in my post is compiled from https://wiki.lineageos.org/devices/espressowifi/build, and LineageOS 14.1 sources on GitHub.
secretwolf98 said:
This ROM in my post is compiled from https://wiki.lineageos.org/devices/espressowifi/build, and LineageOS 14.1 sources on GitHub.
Click to expand...
Click to collapse
Ok, sry have seen my "porting friend" posting here and thought it's a port too because nothing's mentioned in OP.
I'll PM you next days or you can contact me on Hangouts (I am sure you'll find out how to find me)
Android-Andi said:
Ok, sry have seen my "porting friend" posting here and thought it's a port too because nothing's mentioned in OP.
I'll PM you next days or you can contact me on Hangouts (I am sure you'll find out how to find me)
Click to expand...
Click to collapse
That's alight.
Abandoned
LINEAGEOS 14.1
Intro:
There doesn't appear to be any active Lineage OS version for the Galaxy A500FU so I decided to try and build it myself using sources from @DeadSquirrel01. I successfully created the build and now it's up to you lot to report the bugs and for me to find them! Do not expect me to add any new features other than are already available on official Lineage 14.1 devices. Any new updates will likely only bring bug and security fixes.
Installation Instructions:
1) I recommend using TWRP recovery to install LineageOS
2) Make a nandroid backup in case you decide you prefer whatever you were on before
3) Wipe the system, data, cache and dalvik-cache
4) Flash the Lineage zip
5) Flash the GApps zip (Do this right after flashing the Lineage zip)
Downloads:
1) Open Gapps zip (Download the variant of your choice)
2) TWRP
3) Lineage OS
Credits:
Sources:
XDA:DevDB Information
Lineage OS 14.1 for A500FU/A5ULTEXX, ROM for the Samsung Galaxy A Series
Contributors
JW19
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Lineage OS 14.1
Version Information
Status: No Longer Updated
Current Beta Version: 0.1
Beta Release Date: 2018-08-20
Created 2018-08-20
Last Updated 2018-09-05
Lineage OS Downloads
Version 3.2 - 30/08/2018
Changes:
Overclocked CPU to 1.4GHz (Untested)
Version 3.1 - 30/08/2018
Changes:
Overclocked CPU to 1.3GHz (No obvious stability issues)
Version 2 - 25/08/2018
Changes:
NFC and android beam are now enabled and fixed.
Version 1 - 20/08/2018
Changes:
Initial build.
I'm testing it right now. How does it compare to DeadSquirrel's ROM in terms of bugs ?
xneexus said:
I'm testing it right now. How does it compare to DeadSquirrel's ROM in terms of bugs ?
Click to expand...
Click to collapse
I've been running it for the last 4 days.
In theory it should have the same bugs that were on DeadSquirrel's ROM as I haven't (yet) modified his source files.
These would include the torch slowness to turn on.
On the first day of using it, the touch screen would occasionally become unresponsive until i locked the phone then turned the screen on again. I haven't faced this issue since.
My build has the latest security patches and a few new features which you can read about from here:
Lineage Changelog
And every changelog since then...
As said in the post, I'd say this release is quite stable and suitable as a daily driver. I haven't faced any crashes whatsoever.
how about on echo during making a standard phone call where the reception got echo voice of their own while caller got no problem like that? i heard its because of kernel. its right sir?
im using previous build lineage 14.1 (a500F)
wiera89 said:
how about on echo during making a standard phone call where the reception got echo voice of their own while caller got no problem like that? i heard its because of kernel. its right sir?
im using previous build lineage 14.1 (a500F)
Click to expand...
Click to collapse
Went ahead and tested this.
No issue found such as the one you described.
I made and received calls from my a500fu running this build, and I also used a different phone to call and receive calls from my phone. Call audio was fine on both ends and no echo.
JW19 said:
Went ahead and tested this.
No issue found such as the one you described.
I made and received calls from my a500fu running this build, and I also used a different phone to call and receive calls from my phone. Call audio was fine on both ends and no echo.
Click to expand...
Click to collapse
thanks for that info, i will try this rom.. yahoooo!!!!!
later will get you know how its works.. thanks mike
Will there be a build for A500F?
slukk1 said:
Will there be a build for A500F?
Click to expand...
Click to collapse
You can try and see how well this ROM runs on your a500f, no harm in that.
I think most if not all the sources are for a5 in general so this will boot on all a5 variants and may be quite stable.
Great work! @DeadSquirrel01 has also begun working on an Oreo version for this device. Maybe you could also look into that? It's not in a very stable state yet, tough, so it might require quite some work.
krmax44 said:
Great work! @DeadSquirrel01 has also begun working on an Oreo version for this device. Maybe you could also look into that? It's not in a very stable state yet, tough, so it might require quite some work.
Click to expand...
Click to collapse
Thanks krmax44
If this is what you are referring to:
https://github.com/DeadSquirrel01/lineage-15_a5_releases
Then I'm sorry to say but @DeadSquirrel01 has stopped developing it and the final release is from february. The reason for this can be found in the commits.
I will release a 15.1 lineage os for this device eventually, however currently I'm trying to sort through some build errors for it.
JW19 said:
You can try and see how well this ROM runs on your a500f, no harm in that.
I think most if not all the sources are for a5 in general so this will boot on all a5 variants and may be quite stable.
Click to expand...
Click to collapse
And will both SIM work? F and FU differ only in the number of SIM cards, and I care about the work of both SIM. Sorry for the bad English.
Supports Substratum?
slukk1 said:
And will both SIM work? F and FU differ only in the number of SIM cards, and I care about the work of both SIM. Sorry for the bad English.
Click to expand...
Click to collapse
I don't have an a500f so I have no way of testing if both sims work.
On deadsquirrel's rom he made a flashable zip which claims to fix ril issues for dual sim variants.
Flash my rom and if sim card is not detected then do complete wipe, flash my lineage zip again, then flash this:
https://forum.xda-developers.com/attachment.php?attachmentid=4248130&d=1503320229
And then flash the open gapps zip.
Mixterix Se7en said:
Supports Substratum?
Click to expand...
Click to collapse
I haven't used substratum before so I don't know if all themes are compatible, but on my attempt at using a theme there were errors thrown.
this rom support for =>>>>samsung galaxy a5 (2015) model ( sm-a500h) ???????????????????????????
anisbd said:
this rom support for =>>>>samsung galaxy a5 (2015) model ( sm-a500h) ???????????????????????????
Click to expand...
Click to collapse
Flash it and find out.
JW19 said:
Flash it and find out.
Click to expand...
Click to collapse
i am flash 14.0 for sm-a5000 model rom flash complete but sim card not work....................... sm-a500h not lte supported......
JW19 said:
Lineage OS Downloads
Version 2 - 25/08/2018
Changes:
NFC and android beam are now enabled and fixed.
Version 1 - 20/08/2018
Changes:
Initial build.
Click to expand...
Click to collapse
trying your 2nd update and i got error 7 during flashing my A500FU.. but flashing back too Lineage-14.1-20170906 got no problem.. any suggestion to fix this ?
anyway, ill try flash first update tomorrow
thnks for your hardwork mate..
---------- Post added at 04:38 PM ---------- Previous post was at 04:35 PM ----------
slukk1 said:
And will both SIM work? F and FU differ only in the number of SIM cards, and I care about the work of both SIM. Sorry for the bad English.
Click to expand...
Click to collapse
i got this file "A500F-RIL-fix" somewhere from this forum and its help, you can try search similar file like mine but for dual sim card.. not sure work on you or not..
wiera89 said:
trying your 2nd update and i got error 7 during flashing my A500FU.. but flashing back too Lineage-14.1-20170906 got no problem.. any suggestion to fix this ?
anyway, ill try flash first update tomorrow
thnks for your hardwork mate..
---------- Post added at 04:38 PM ---------- Previous post was at 04:35 PM ----------
i got this file "A500F-RIL-fix" somewhere from this forum and its help, you can try search similar file like mine but for dual sim card.. not sure work on you or not..
Click to expand...
Click to collapse
That's strange mate, I've successfully flashed it on my device.
Make sure you use the twrp I linked to in OP.
Also as the version you are using is from deadsquirrel and quite a while ago, maybe a full wipe and then install will help.
Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.