Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.
Related
Official Thread will be soon up! Head over there guys.
This thread is dead!
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @forkbomb444. crDroid is available thanks to him. I'm using his devices, kernel, proprietary vendor and many other repos to build
All the source code for crDroid is available in the Github
repo. And if you would like to contribute feel free to pull a request.
Kernel features beyond CyanogenMod ones (Work in Progress) [Future Release]
• Boeffla Charging Control
• Boeffla Sound.
All this can be initiated through some script knowledge.
INSTALLATION METHOD
First time installing crDroid to your I9300, or coming from another ROM:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
-Note: Flash ROM and GApps together or else you'll have a hard time.
- Flash SuperSU (not mandatory. We have
CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
Download Link:
https://www.androidfilehost.com/?fid=24415232478677728
GApps: opengapps.org
Full support
https://plus.google.com/communities...4243234a-de8a-4262-bd30-68582ebeb472?hl=pt_br
Don't expect any support if you
- are not running stock crDroid-kernel
- have installed any mods such Xposed!
- have modified system files
Special thanks:
- Google
- CyanogenMod
- @forkbomb444
- @temasek
- @Darkened_Sky
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Source: http://www.github.com/cyanogenmod
https://github.com/crdroidandroid
Reserved 1 (Screenshots)
Someone please share some screenshots!
FAQ
Do read this before asking questions!
1. Q: How do I get root?
A: Enable it in developer options.
2. Q: But can I use SuperSU instead of the built-in SU?
A: Sure. Make sure that the built-in SU is disabled in developer settings. Afterwards flash SuperSU. By default after a clean flash built-in SU is disabled, so you can also directly flash SuperSU after a clean flash
3. Q: Which gapps do I need?
A: This ROM is based on CM13/Android 6.0x/Marshmallow. Therefore choose your gapps accordingly. If you want to use the recommended opengapps, choose the ARM 6.0 version. I highly suggest to use either the pico or the nano package. All other gapps can later still be installed via playstore!
4. Q: Help! I have a problem/issue/bootloop/....?
A: Please follow these steps:
1. Make sure that the problem is not already mentioned in either this thread or in the CM13 thread.
2. Make sure that you can reproduce the problem on your device with absolutely no additional modification and after a clean flash. This includes being on stock kernel, no xposed, no SuperSU, no theme!
3. Try to replicate the problem on official CM13. If it appears there, please ask there.
4. If your problem couldn't be solved with above steps, post here, with an exact description of how to reproduce and if possible with logs.
5. Q: Is xposed working?
A: Yes but make sure to use the latest and the correct version for Marshmallow. Inform yourself in the xposed thread. Everything is clearly explained there which version you need. The version that works for you on official CM13 will also work here.
6. Q: Can I use custom kernels?
A: Yes. Users which use SuperSU frequently report problems with bootloops after flashing a custom kernel. Therefore I'd suggest to use built-in SU.
7. Q: I have added files to my system, but after each ROM update they disappear?
A: Yes during a flash the /system partition is wiped.
yess i'v ben waiting for this rom to get MM
ayoubadri said:
yess i'v ben waiting for this rom to get MM
Click to expand...
Click to collapse
What you waiting for? Give it a try
nice new rom for s3 thinks Dev
spide3 said:
nice new rom for s3 thinks Dev
Click to expand...
Click to collapse
Download and Flash! Enjoy
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
sunny1234590 said:
P.S: I am not the developer of this ROM! I have just created this thread. Though I can do a bit of coding. So, for all bootloops or random reboots I need proper information
Click to expand...
Click to collapse
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
jujuna said:
ROM is awesome, but i havenot mobile data... cellular radio working, i have reception but i havenot mobile data. APN is right. GT-I9300
Click to expand...
Click to collapse
No bug on my device. Using stock kernel?
Are you maintaining this ROM now?
sameer23 said:
Are you maintaining this ROM now?
Click to expand...
Click to collapse
I have opened this thread on the behalf of the original developer but yes, I'll keep it updated with new builds. So, kind of Yes!
sunny1234590 said:
No bug on my device. Using stock kernel?
Click to expand...
Click to collapse
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
jujuna said:
my kernel is 3.0.101-CM-gbe3d845 [email protected] #1 << is it a stock?
Click to expand...
Click to collapse
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
sunny1234590 said:
Yes, it is stock. Try a clean flash and report back!
Do you face this issue on official CM13 also?
Click to expand...
Click to collapse
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
jujuna said:
yes, on Official CM13 i had this proble. only AICP marshmallow rom i havenot this problem. crDroid, bliss, an etc i have this problem. my installation was clean 100%.
Click to expand...
Click to collapse
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
sunny1234590 said:
I see! Can you tell me which baseband version you have?
And it's strange considering the fact that AICP is also based on Official CM13 just like crDroid!
Click to expand...
Click to collapse
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
jujuna said:
i know, its weird for me too.. my baseband version is I9300XXEMG4 and IP 192.168.0.100 fe80::237:6dff:fef2:c4a0
Click to expand...
Click to collapse
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Hi guys,
I can't give root permission to apps.
I've enabled Developer Options, and enabled Root Access to Apps, but when I try to run an app that needs root, it doesn't ask permissions.
Could you give me a hint?
Thanks
sunny1234590 said:
That's a slightly older baseband version if I am correct. Just try to flash the latest baseband and see if it makes some difference though I doubt.
Since, I can't reproduce this error so, it's not a bug for me at least. Someone else must confirm about the mobile data thing.
Click to expand...
Click to collapse
i flashed but no result
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!
Installing is usual - MAKE A BACKUP OF YOUR OLD ROM, Wipe, Install the new zip. GApps are included Out-of-the-Box.
After installing:
1. Tell if it boots
If it doesn't: say what SKU is your phone (for example mine is XT1441)
2. Tell us what works and what doesn't
3. If at least calling works and Wi-Fi works, you can try using it as a daily driver. Tell us how battery goes.
Do all that in the "Reviews" tab on the top of this thread.
I'm going to try it out, too. And I'm going to tell you what happened.
Download the ROM through the "Downloads" tab.
==================================================
UPDATE: Base Android changed to Marshmallow by requests from this thread and for better compatibility.
XDA:DevDB Information
MIUI9, ROM for the Moto G 2015
Contributors
nicolasmart, jhenrique09, CyanogenMod (formely Lineage)
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-10-26
Last Updated 2017-10-29
Reserved
Changelog:
2017.10.29 - Test4 (Lollipop):
* Reverted base to Lollipop. Looks like even Mi 4 isn't compatible with our device. I'm going to upgrade back to Marshmallow or Nougat when official MIUI 9 comes out.
* We have some progress - the kernel now works and the phone starts booting. It hangs on the boot animation. Please send logcats. I will look through mine, too.
2017.10.28 - Test3 (Marshmallow):
* Switched base to Marshmallow
* Also not booting because of the wrong architecture.
2017.10.26 - Test2 (Lollipop):
* Flashing but not booting
2017.10.26 - Test1 (Lollipop):
* Initial Release
* Not flashing
Does Gapps are included or have to download seperately and if seperately then which one?
Apurba99 said:
Does Gapps are included or have to download seperately and if seperately then which one?
Click to expand...
Click to collapse
GApps are included out of the box, so don't worry about that. Again, don't plan to use this as a daily driver. Just test it and tell if it works.
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone ?
Apurba99 said:
If there is some problem ,then its wouldn't hard brick my device, right?I have only one phone
Click to expand...
Click to collapse
Don't worry! It won't hard brick it. You will just need to reflash your ROM with something stable, like Lineage OS, for example.
Ok then, I'll flash it ASAP
It will be nice if there is marshmallow or Nougat.
Flashing it ASAP :good:
mg_jishad said:
It will be nice if there is marshmallow or Nougat.
Click to expand...
Click to collapse
I'm sorry. In MIUI it doesn't matter that much what Android version are you running. And I don't think Lollipop is obsolete. I just chose it because Redmi 2 runs our chipset and it's the easiest device to port from.
UPDATE: Zip File doesn't flash. Will fix ASAP.
Flashed but Stuck on boot logo .. Waited for around 10mins.
nicolasmart said:
You want MIUI 9? There are still no fancy threads for MIUI 9 on osprey. I tried to port it. Now people should test it!:
Click to expand...
Click to collapse
Flashed but dont pass on boot logo
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Great
rahul9999 said:
Great
Click to expand...
Click to collapse
Can you try it out, please? My phone is currently not with me.
nicolasmart said:
Can you try it out, please? My phone is currently not with me.
Click to expand...
Click to collapse
I would like to be test this but as i don't want to switch any ROM for sometime.. will let you know if possible for me to test
nicolasmart said:
Project Updated!
Using Marshmallow port from Redmi 3S. Edited kernel. Try it out and see if it boots. There must be quite some bugs. But I want to see if it boots.
Go ahead and try it out if you have already downloaded another stable ROM like Lineage to flash after you try this one.
Click to expand...
Click to collapse
Where is the download tab?
Hunimix said:
Where is the download tab?
Click to expand...
Click to collapse
Use this link: #Download tab
...or just look at the top of this thread.
nicolasmart said:
Use this link: #Download tab
...or just look at the top of this thread.
Click to expand...
Click to collapse
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Hunimix said:
I do not appear in the top, so my question, I'm already downloading from the #download tab, ty
Click to expand...
Click to collapse
Hmmm... interesting... I should put the downloads tab link in the first post then.
Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!
DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?
Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device
What about jio volte is it working on it and if yes then how because in minbe it is working
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried
Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte
If you try arm64aonly it will stuck at mi logo.
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
can any1 confirm if volte works or not plz ?
xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix
Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!
Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.
Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/device_oneplus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/device_oneplus_sdm845-common
3. kernel: https://github.com/0ctobot/neutrino_kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/vendor_oneplus_sdm845-common
ROM sources on github: https://github.com/Colt-Enigma
Download here: https://androidfilehost.com/?fid=1899786940962581536
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.
Thanks for building this, am currently using it on op5t and it's super fine with great battery life
Let's see how it will perform in our op6
Do you will support your 10 Roms?
Sh0X31 said:
Do you will support for your 10 Roms?
Click to expand...
Click to collapse
Sure, it's not a problem to make a new build occasionally.
quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Really great dev, thanks for your hard work... Because of You, OP6 thread is RICH NOW...
No need to flash the oos zip at the start inorder to boot?
showstopper1 said:
No need to flash the oos zip at the start inorder to boot?
Click to expand...
Click to collapse
You need it for EVERY ROM OUT THERE BRO... flash oos twice... Then flash the rom
quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Dude this rom slays. Running great on fajita. Thanks man.
What the heck makes high brightness mode keep turning back on after I shut it off?
is this rom using may security?
cmart4 said:
is this rom using may security?
Click to expand...
Click to collapse
yup
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
sky104hk said:
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
Click to expand...
Click to collapse
It's Kernel Issue as it's already noticed in other rom as well..
..
ColtOS-Enigma 4.1: https://androidfilehost.com/?fid=1395089523397965580
You need to also flash this zip after flashing the rom in order to fix the messed up settings menu: https://androidfilehost.com/?fid=1395089523397965583 (thanks to Rakesh Batra from telegram).
CYB3R0ID694 said:
It's Kernel Issue as it's already noticed in other rom as well..
Click to expand...
Click to collapse
so any other custom kernel can try? pretty love smurf kernel but not quite compatible...
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
pmbonea said:
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
Click to expand...
Click to collapse
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Thanks a lot!:good:
quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Can you also merge the Finger Print patches for us 6T Users?
Mannan Qamar said:
Can you also merge the Finger Print patches for us 6T Users?
Click to expand...
Click to collapse
uh, i wouldnt know how to do that
A2017X_O_B04_SL!M8
Just for fun....no more no less...
For our dedicated stock users
For those who weren't able to install or obtain the A2017G-O-B04 OTA update, I made a SL!M8 rom (not an AROMA because atm I don't have much time ) that can boot on a working stock Oreo rom.
This version is tested on stock B02 as on my SL!M7 (based on B03). So there should be no problem at all
I hope you'll ENJOY !
Modifications :
* full system r/w
* removed some unwanted apps and the ability to remove more when booted into the rom with a root explorer
* safetynet pass cts will pass when flashing magisk 19.3
* youtube vanced
* adaway 4.2.6
* full working Dolby Atmos
* wifi working...and ofc all the rest
* fastboot working
*.....
Installation : NOTE : for those having trouble installing, flash the twrp 3.2.10 with the universal bootstack (don't forget the modem)
1. unlocked, twrp3218 (non-treble) installed (or compatible one for oreo...)
1.a boot into twrp, format data/factory reset, reboot twrp, wipe system
2. flash A2017GV1.3.0B04_BootStack ( flash your modem type again as this has the latest G-version one )
3. flash A2017X_O_B04_SL!M8
4. flash Magisk 19.3
5. wipe dalvik/cache and boot
6. setup phone
7. you should now have a fully working SL!M8 :cyclops:
Contributors :
@raystef66
Credits :
@totmakina :highfive:
@asderdd
ROM OS Version : OREO 8.0.0
Source : ZTE stock-rom A2017V1.3.0B04
Kernel : ZTE stock
Security Patch : 2019-04-01
Version Information :
Status : Stable
Created : 2019-07-10
Uploaded : 2019-07-10
NEW A2017G-O-B04-MODEM
Good rom for those of us who like stock! I will add Xposed.
I love the stock. I'll test how the battery goes since I put it in a new one a little while ago
Thanks Rays!
totmakina said:
Good rom for those of us who like stock! I will add Xposed.
I love the stock. I'll test how the battery goes since I put it in a new one a little while ago
Thanks Rays!
Click to expand...
Click to collapse
I'm currently running the chinese B23 with TWRP, is it possible to flash this over? Or should I flash other rom first?
Also, a bit offtopic suggestion: You should update your camera2api enabler ZIP, because it somehow changes the build name to A2017GV1.3.0B02 on other roms (this happened to me on european B03 and chinese B23 and should also happen on this new B04)
joaocandeias said:
I'm currently running the chinese B23 with TWRP, is it possible to flash this over? Or should I flash other rom first?
Also, a bit offtopic suggestion: You should update your camera2api enabler ZIP, because it somehow changes the build name to A2017GV1.3.0B02 on other roms (this happened to me on european B03 and chinese B23 and should also happen on this new B04)
Click to expand...
Click to collapse
You can try since it is a stock Oreo rom. So follow instructions furtheron.
Ah yes, you're referring to this one : https://androidfilehost.com/?fid=11410932744536993784
Yeah, it's all in the build.prop...i'll make another one if you want
Thanks so much @raystef66 ! A lot of us have been waiting for this! Hopefully I have better luck flashing this, as B03 Sl!m was giving me encryption issues upon rebooting after flashing.
raystef66 said:
You can try since it is a stock Oreo rom. So follow instructions furtheron.
Ah yes, you're referring to this one : https://androidfilehost.com/?fid=11410932744536993784
Yeah, it's all in the build.prop...i'll make another one if you want
Click to expand...
Click to collapse
Yes, that's the one. I can live with it as long it doesn't affect the ROM usage (I don't think it does though) but it's up to you.
About the new SL!M8, I'll see if I can flash it tomorrow and give feedback
Thanks for your awesome work.
Q: i installed b03 and cant find double tap to wake anymore. Is the Feature gone since Oreo? I wonder if the bugs im having will be gone with this update (gboard constantly crashes when opening settings so i cant change/add languages, SMS bug / can send but not receive, Turn off screen is not installed even tho i choose it in aroma Installer)
Hi, raystef66. Thank you so much for your contribution! I stayed on "ancient" slim B10 (Nougat) until now for Daydream support. Now I upgraded and it works fantastic.
joaocandeias said:
Yes, that's the one. I can live with it as long it doesn't affect the ROM usage (I don't think it does though) but it's up to you.
About the new SL!M8, I'll see if I can flash it tomorrow and give feedback
Thanks for your awesome work.
Click to expand...
Click to collapse
Updating the HDR+ zip again - had to check it over - should work
Here you go : A2017G-V1.30B04_HDR+
boxemall said:
Q: i installed b03 and cant find double tap to wake anymore. Is the Feature gone since Oreo? I wonder if the bugs im having will be gone with this update (gboard constantly crashes when opening settings so i cant change/add languages, SMS bug / can send but not receive, Turn off screen is not installed even tho i choose it in aroma Installer)
Click to expand...
Click to collapse
DT2W is working fine. Up to you to test out the other things.
romitkin said:
Hi, raystef66. Thank you so much for your contribution! I stayed on "ancient" slim B10 (Nougat) until now for Daydream support. Now I upgraded and it works fantastic.
Click to expand...
Click to collapse
Good for you :good:
Nice News in the Morning
Thx for your Efforts Ray. I'm actually on your
B03 Sl!m7. can i download only the b04 sl!m package and flash it over in twrp, or is it better to follow your steps from the beginning ?
Greets from Berlin :good:
Tunox said:
Nice News in the Morning
Thx for your Efforts Ray. I'm actually on your
B03 Sl!m7. can i download only the b04 sl!m package and flash it over in twrp, or is it better to follow your steps from the beginning ?
Greets from Berlin :good:
Click to expand...
Click to collapse
You can flash it when on SLIM7 - I tested it myself.
So backup your stuff, factory reset, reboot twrp, wipe system, flash B04 bootstack, SL!M8 and magisk19.3
You can try a dirty flash but that's up to you to test. I always prefer clean
a2017u
Hello and Ty @raystef66 for this great work.
i have the A2017U version . which modem should i use?
ty
David
le011 said:
Hello and Ty @raystef66 for this great work.
i have the A2017U version . which modem should i use?
ty
David
Click to expand...
Click to collapse
You're welcome.
You can use this one : https://androidfilehost.com/?fid=1395089523397887283
raystef66 said:
You're welcome.
You can use this one : https://androidfilehost.com/?fid=1395089523397887283
Click to expand...
Click to collapse
Ty.....
great day....
raystef66 said:
You can flash it when on SLIM7 - I tested it myself.
So backup your stuff, factory reset, reboot twrp, wipe system, flash B04 bootstack, SL!M8 and magisk19.3
You can try a dirty flash but that's up to you to test. I always prefer clean
Click to expand...
Click to collapse
I also prefer a Clean flash, so i wait until i'm home after Work and then i let the magic begin.
if any other try the diety flash over his b03 slim7 then please let me/us know, if it's work.
Unjustified Dev said:
I built my own kernel from source to remove zte selinux changes that block magisk. I don't think locking the bootloader is necessary. If someone is already on a stock or stock-like Oreo build, without a vendor partition, they only have to flash system and boot.img. This can be done from fastboot.
Click to expand...
Click to collapse
@raystef66
Thanks for your work! Is the Kernel made by U-Dev included in this ROM and if not @Unjustified Dev could you please show us where to get it and thanks a lot
I had a complete crash on b03 this morning. Phone shut down out of nowhere and wouldn't boot anymore. I then saw this as an opportunity to test b04. So far most bugs (Gboard crashing, sms bug) are gone. I just can't find the D2W setting. Where is it?
Regards
boxemall said:
I had a complete crash on b03 this morning. Phone shut down out of nowhere and wouldn't boot anymore. I then saw this as an opportunity to test b04. So far most bugs (Gboard crashing, sms bug) are gone. I just can't find the D2W setting. Where is it?
Regards
Click to expand...
Click to collapse
Go to settings->featured->gesture&motion, under gesture.
silvbm said:
Go to settings->featured->gesture&motion, under gesture.
Click to expand...
Click to collapse
Ty!
that was it. I really didn't think of this. :good:
on a side note: i use HELIX Engine. [https://play.google.com/store/apps/details?id=com.teamhelix.helixengine]
it used to work fine on 7.1.1.
Now i'm getting this (see 1st attachment),
and i still get this shown every time i reboot. can i get rid of it somehow? it's annoying as it can't be sped up and feels way longer than 5 seconds... (see 2nd attachment)
regards