[Q] Droid 4 on the brink. I think - Motorola Droid 4

@ sd_shadow My droid 4 is stuck with the android lying there. I'm able to access recovery mode and thats it. I did a wipe and factory reset and i think i may have wiped the OS im not sure. My PC doesnt recognize my phone.. Is there a solution for this. Thanks in advance!

ThaHawk said:
@ sd_shadow My droid 4 is stuck with the android lying there. I'm able to access recovery mode and thats it. I did a wipe and factory reset and i think i may have wiped the OS im not sure. My PC doesnt recognize my phone.. Is there a solution for this. Thanks in advance!
Click to expand...
Click to collapse
It's @sd_shadow no spaces.
Try
Force power off (hold power button 10 - 15 secs)
Connect to wall charger, does it show charging screen?
Sent from my XT907 using Tapatalk

Theres no charging screen, just boot logo and the dead android

ThaHawk said:
Theres no charging screen, just boot logo and the dead android
Click to expand...
Click to collapse
Power off, Hold volume down, power on
Does it boot into AP Fastboot? If so post what is on screen.
Sent from my XT907 using Tapatalk

sd_shadow said:
Power off, Hold volume down, power on
Does it boot into AP Fastboot? If so post what is on screen.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Yes I can get it to AP Fastboot

ThaHawk said:
Yes I can get it to AP Fastboot
Click to expand...
Click to collapse
I stand corrected! I was able to last night, now its just stuck on the boot logo

sd_shadow said:
Power off, Hold volume down, power on
Does it boot into AP Fastboot? If so post what is on screen.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
AP Fastboot FlashMode (s)
0A.77
eWC Info: Size 16G
To return to normal mode - First press power key to power down
Device is LOCKED Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable

ThaHawk said:
AP Fastboot FlashMode (s)
0A.77
eWC Info: Size 16G
To return to normal mode - First press power key to power down
Device is LOCKED Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Click to expand...
Click to collapse
Battery is low, you need a fastboot cable
Motorola Fastboot/Factory Programming Cables Links
So you can flash with RSD Lite
Droid 4: Flashing XML/Firmware with RSD Lite (Je…: http://youtu.be/CM3XjZT80m0
Sent from my XT907 using Tapatalk
---------- Post added at 11:03 AM ---------- Previous post was at 10:56 AM ----------
Another thing to try
Booting from AP fastboot to charging mode
If the Device will only boot to AP Fastboot and it says Battery Low
Connect the phone/Device ato a Wall Charger (not PC)
-In AP Fastboot Mode hold Volume down& power buttons at the same time for +10 seconds
- When screen goes black...release power button
-Then IMMEDIATELY press and hold Vol - and Vol+ to boot to Boot Menu.
- In Boot Menu scroll down with volume down to BP Tools, press volume up to select
- Device should boot to Charging Mode with battery icon
- Once battery is charged, try flashing in AP Fastboot again
This will only work if battery charging Firmware is still preset and not corrupted
If Motorola Device will not boot to Charging Mode, a Fastboot cable will be needed.
http://goo.gl/QllP1j
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my XT907 using Tapatalk

Once again thank you! I just found an old battery that's charged The phone is now in AP fastboot mode and plugged to my PC.
But it isn't showing up

ThaHawk said:
Once again thank you! I just found an old battery that's charged The phone is now in AP fastboot mode and plugged to my PC.
But it isn't showing up
Click to expand...
Click to collapse
Installed official Motorola drivers?
Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT907 using Tapatalk

sd_shadow said:
Installed official Motorola drivers?
Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Yes I just reinstalled the driver to make sure and the phone still isnt showing.
I already have RSD Lite on my PC
And Motorola device manager

When you connect to PC
AP Fastboot should change from
Connect USB
Data Cable
to
Transfer Mode:
USB Connected
this will happen even if drivers are not correct, if not
likely, USB Cable or phones USB port is bad.

sd_shadow said:
When you connect to PC
AP Fastboot should change from
Connect USB
Data Cable
to
Transfer Mode:
USB Connected
this will happen even if drivers are not correct, if not
likely, USB Cable or phones USB port is bad.
Click to expand...
Click to collapse
It does change to Transfer Mode USB Connected!
I have a shady USB port I have to hold the cable the whole time.
I have 3 failed attempts using [stock-2015-04-06--18-56-19 9.8.2O-72_VZW-18-8]

ThaHawk said:
I have a shady USB port I have to hold the cable the whole time.]
Click to expand...
Click to collapse
Do not, EVER, flash vital stuff with a bad USB port or fidgety cable. You're just asking for trouble.
Bug a friend for 20 minutes on their computer, or use one at work, something.

Septfox said:
Do not, EVER, flash vital stuff with a bad USB port or fidgety cable. You're just asking for trouble.
Bug a friend for 20 minutes on their computer, or use one at work, something.
Click to expand...
Click to collapse
So is the device trash now?

ThaHawk said:
So is the device trash now?
Click to expand...
Click to collapse
I keep getting a failed message at the start. Do i have the correct firmware?
VRZ_XT894_9.8.2O-72_VZW-18-8_1FF.xml\cdma_maserati_9.8.2O-72_VZW-18-8_1ff.xml

ThaHawk said:
I keep getting a failed message at the start. Do i have the correct firmware?
VRZ_XT894_9.8.2O-72_VZW-18-8_1FF.xml\cdma_maserati_9.8.2O-72_VZW-18-8_1ff.xml
Click to expand...
Click to collapse
The bad port is on the phone, yes?
You cannot hold cable during Flashing, is way to sensitive for that.
If you have to use tape or a rubber band, to hold it in correct place.
Even with a good port touching the phone or cable can cause Flashing to fail.
Sent from my XT907 using Tapatalk

sd_shadow said:
The bad port is on the phone, yes?
You cannot hold cable during Flashing, is way to sensitive for that.
If you have to use tape or a rubber band, to hold it in correct place.
Even with a good port touching the phone or cable can cause Flashing to fail.
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Yes the bad port is on the phone.
I have it setup where its stable and RSD Lite sees the phone
The process just keeps failing at the start

ThaHawk said:
Yes the bad port is on the phone.
I have it setup where its stable and RSD Lite sees the phone
The process just keeps failing at the start
Click to expand...
Click to collapse
Several other options, Moto fastboot, Droid 4 utility, house of moto, RSD flasher.... But you may have corrupted the bootloader.
[SCRIPT] DROID 4 Utility XT894 Jellybean -- Windows + Mac + Linux (All In One!)
and [Video]How-To Flash Droid 4 Jellybean Firmware with Droid 4 Utility
Links to others in the index
[INDEX] Development Motorola Droid 4
Edit : others in Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my XT907 using Tapatalk

ThaHawk said:
Yes the bad port is on the phone.
Click to expand...
Click to collapse
Ah, I thought you were talking about the computer end. My mistake.
What's the failure message? Anything specific, or just "flash failed"? Have you tried a different cable?

Related

AP FastBoot Flash mode (s) (Flash Failure

Hi ,
The other day I decided to fxz'ed my phone back to stock. Somewhere during the flash i seemed to have gotten a flash failure, but my phone rebooted and seemed to be fine, stock. I thought nothing of it.
I was out and about today without my car charger and my phone died. When I got home I plugged my phone into my wall charger and instead of the normal battery on my screen the phone booted to this :
AP Fastboot Flash Mode (S) (Flash Failure)
0A.61
Battery Low
Cannot Program
Connect USB
Data Cable
I cant seem to get to any other mode.
Im hoping i didnt brick my phone. Any Help Would be greatly appreciated .
Do this and will reflash the system http://rootzwiki.com/index.php?/top...nd-43V3R-Root-For-The-Bionic-V2.1#entry127684
Sent from my DROID BIONIC using xda premium
Power the phone off. The try to boot into the bootloader (press and hold Vol up / vol Down, then press and hold power until it comes on).
Select Normal boot - if it boots normally this may be something that you have to live with. Every time you turn the phone off and power it back on, you'll need to do this. If you remember to do it then you can bypass directly to the bootloader menu and select boot normally, and not have to see that stupid flash failure message.
My phone does this too. So does cellzealot's. We both tried to do different things in testing and both ended up with the same symptom.
I tried to FXZ back to pure stock to see if I could do it. I was already on 5.7.893, so that in effect may have b0rked the flash, and it sounds like you might have done the same thing.
Try reflashing using a desktop and the back usb ports
Sent from my DROID BIONIC using XDA App
Solution Ever Found?
I have this very same problem. Was a solution ever found? Thanks.
Have also been running into the problem, but I've jerryrigged it to be able to charge the battery. Now I'm at the point where I can't find any method to fix my soft bricked bionic (ran into the problem rolling back to 5.5.893 from 5.7.893). Now I'm stuck on the AP Fastboot menu and can't get past loading the system.img whether that using the RSD Lite methor or the moto-fastboot method. One-click methods haven't worked either and I keep trying anything I can. Please help, I'm desperate right meow.
Is your battery charged? Are you trying to get on .902?
Go to link below. There find the fX files and download the one that will do a full phone format including webtop and bootloader. (Its marked complete)Then make sure all drivers are installed in windows and use RSD lite to flash. It will take over half an hour to flash. Had same problem and it fixed it. The key is the file you use to flash the phone. Needs to be the full file. Rom/Webtop/Bootloader
Here is the link. And be sure you download the complete one and not minimal. Do not uncompress the archive either. Use rsd lite and the file in its entirety. Let rsd do any uncompressing needed
http://briefmobile.com/droid-bionic-receives-fastboot-recovery-files
Sent from my DROID BIONIC using Tapatalk
dragon droid said:
Go to link below. There find the fX files and download the one that will do a full phone format including webtop and bootloader. (Its marked complete)Then make sure all drivers are installed in windows and use RSD lite to flash. It will take over half an hour to flash. Had same problem and it fixed it. The key is the file you use to flash the phone. Needs to be the full file. Rom/Webtop/Bootloader
Here is the link. And be sure you download the complete one and not minimal. Do not uncompress the archive either. Use rsd lite and the file in its entirety. Let rsd do any uncompressing needed
http://briefmobile.com/droid-bionic-receives-fastboot-recovery-files
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Pretty sure you don't have to go through all of this...
But whatever works, I guess.
Those are old files. You don't want to use those files anymore and depending on the current state of your phone they won't work anyway.
You need to use RSD Lite 5.5 and the new full .902 XML.zip and it will restore your phone.
The latest driver version is also now 5.5 but the 5.4 drivers should work fine for Bionic.
All of the old tools and methods are no longer current and using the new file either complete with RSD Lite or flashing specific partition images with fastboot, if you know what needs to be fixed, is the way to restore your phone.
All of these methods will require a sufficiently charged battery to succeed or a factory flash cable that bypasses the battery altogether, as well as a PC with at least 4gb of RAM in order to manage the large image files. The time is dependent on you PC specs.
I have the same problem too
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
delisawzrv said:
I have the same problem too
Click to expand...
Click to collapse
Re-read CellZealot's post. If you have any trouble using rsdlite or obtaining the files, hit me up and I will be happy to help.
If your battery is low or dead then you have several options, two of them "free" and several requiring a purchase.
First, find someone with a Bionic that will let you charge your battery in their phone.
Second, cut a charger cable or USB cable and hot wire the stripped ends to the battery terminals in the phone to charge it enough to recover the phone. This is dangerous and not recommended but it will work and can be managed on your own if you have a spare cable.
Third, buy an spare battery which will likely come with enough charge to get through a flash cycle.
Fourth, buy an external battery charger and use it to charge your battery completely and then restore your phone.
Fifth, buy a Motorola Factory flash cable or make one yourself if your are skilled with a micro soldering iron and motivated. This type of cable has a different pin out and has the +5v on pin 1 which bypasses the battery and powers the device directly even without a battery inserted at all.
This is a permanent solution and such a cable can be used to restore any Motorola device and many others that are configured in the same way.
There is only one place to get one publicly, and I should disclose that I am directly involved with that place. We sell these cables and had them produced for us to our specification just for this purpose.
http://shop.teamblackhat.info
I know this post is old, but I've recently rebuilt a Droid. Turns out they CAN charge.
Pull the battery, and hold down one of the keys while replacing battery and connecting to power.
The droid will show the power off charging battery icon then and it charges fine.
Check Youtube, there are several videos.
Imagine the thousands of Droid owners who unnecessarily purchased charging cords, ex
Please my Motorola Droid is stuck on the logo eye and when I try to flash it with the stock ROM, it says "failed" with the tool
Please I need help
DakidMelo said:
Please my Motorola Droid is stuck on the logo eye and when I try to flash it with the stock ROM, it says "failed" with the tool
Please I need help
Click to expand...
Click to collapse
Which tool?
Sent from my perry_f using XDA Labs

Droid 4 Utility Gingerbread Only

Gingerbread only. If you are on ICS this will not work. Don't try! Get the ICS only tool here: http://forum.xda-developers.com/showthread.php?t=1779810
This is based on the original Droid 4 Utility with edits. Contains the complete GB fastboot files to restore your phone, root, unroot, install voodoo rootkeeper, safestrap of BG, etc. Extract after downloading and doubleclick the script to run.
Download here: Droid4 GB Only.zip - 1.19 GB
MD5 checksum posted at the hosting site.
If you have trouble connecting be sure usb debugging is on and you have the latest moto drivers installed. Moto drivers here: https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/78460/p/30,6720,8302
For menu 1 or 2 your phone must be in fastboot mode first. Enter this by using the tool option or manually by powering off, then hold both volume buttons and pressing power for a few seconds, release the power button and select "ap fastboot".
And of course be sure you have a good usb cable and a full battery if restoring your GB system.
Use at your own risk.
My phone seems to have no Android OS. It also has a dead battery. Plugging in the charger only shows the Motorola Dual Core screen. It won't turn on when connected to the pc. I can still boot to the Boot Mode Selection Menu. I also have a factory cable coming in a couple of days. Will I be able to use this utility using this cable? I can still go into Fastboot connected to the computer with the cable?
badboi_zero said:
My phone seems to have no Android OS. It also has a dead battery. Plugging in the charger only shows the Motorola Dual Core screen. It won't turn on when connected to the pc. I can still boot to the Boot Mode Selection Menu. I also have a factory cable coming in a couple of days. Will I be able to use this utility using this cable? I can still go into Fastboot connected to the computer with the cable?
Click to expand...
Click to collapse
Yes, you can use this utility to reflash .219 to your phone through fastboot. Did the same thing to mine awhile ago and actually used it to reflash stock so I could upgrade to the .217 leak
Sent from my DROID4 using xda app-developers app
I'm having troubles rooting my .219 D4.
I installed the drivers, and according to the Moto device manager, I am up to date. USB Debugging is checked on.
When I try to root it using this tool (menu 3) and the phone is plugged in with charge only mode (using a stock Moto cable), this is what the command prompt spits out. It isn't instant, it's usually done over the course of 2 minutes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doesn't actually reboot on its own, and after rebooting manually, there is no SU app in my drawer.
I then tried to use menu 3 while in AP Fastboot mode, by using power and both volume buttons to get into the fastboot menu. I plug in my phone to the computer, and run the script and I get this:
It just hangs there for over 5 minutes and the phone doesn't do anything.
Here is the setup for my latter attempt:
Please help me figure this out. Could the drivers be corrupt? I've uninstalled and re installed the device manager from moto a couple of times. Could my anti-virus be blocking something? I think that the issue stems from a problem in the interface between the device and the computer.
Thanks in advance for any help
Hmm..it looks like the tool is possibly seeing more than one ADB server running. I'd the phone and let it up come up normal. Open up a task manager and go to the process tab. Are you seeing more than one ADB.exe process running? For some reason the tool thinks you have more than one device attached and as a result, isn't sure where to send the exploit.
This doesn't explain the troubles with Fastboot however.
When I plug in my phone and open up the tool, one adb.exe shows up in my task manager. Once I run the root script, I see a second one open. I tried killing it, and it will just open up again. How do I fix this?
If this is on the computer side, why wouldn't it explain the Fastboot problem?
SOLVED: Well, the problem wasn't really solved, but I transferred all the necessary tools to a different PC and rooted the device. So it was an issue with the original computer. MY theory is that it was an issue with the ADB interface from the Moto drivers. I'm purely spitballing on that though.
Thanks for the help anyways, guys. Time to have some modding fun!
Is there a mirror? I can't seem to download this...
Thanks for the utility!
I had some complications with the OTA update and realized that a fastboot back to stock was the only remedy. I couldn't find a linux solution (am I missing something?) so I modified the script to use moto-fastboot32. Worked great, thanks again!
Can some provide a mirror for this link? This isn't downloading...
can anyone throw up a mirror of this or a torrent? my download keeps timing out after an hour....
svrnmnd said:
can anyone throw up a mirror of this or a torrent? my download keeps timing out after an hour....
Click to expand...
Click to collapse
Just another request for a new mirror for this file. I would really like to unroot so I can update to ICS.
I don't think you have to unroot to update... If you've made a lot of changes to your system file, you'll probably have to undo them or fastboot back to stock (this includes installing safe strap)
Sent from my Galaxy Nexus using xda app-developers app
Try the ICS tool, it now has fastboot for ICS.

[Q] Xperia Z cannot get in FLASH MODE

I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
I think you have to press the volume down button and then plug it in.
hope i helped.
Mufrad said:
I think you have to press the volume down button and then plug it in.
hope i helped.
Click to expand...
Click to collapse
Same, I try Press Volume Up or Volume Down, also same, nothing happen.:crying:
keroro84 said:
Same, I try Press Volume Up or Volume Down, also same, nothing happen.:crying:
Click to expand...
Click to collapse
I only get an unknown USB device and i don't seem to have any correct driver.
unable to access flashmode
nurps said:
I only get an unknown USB device and i don't seem to have any correct driver.
Click to expand...
Click to collapse
i can confirm that, got the same issue - i installed at least cwm for cm10.1, want to go back to stock rom - need another kernel - only can be installed by fastboot but i can not access the mode - volume up or down while plugging in usb cable doesn't work, no driver change
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
same here, trying to to update using Sony PC Companion and was told in the instructions, under step 5, to press and hold volume don key on the phone while plugging the USB cable into your phone, tried several times, even restarted phone, not happening.. HELP!1111111111
- Make sure the phone has charge.
- Remove SD card from phone.
- Make sure the correct divers are installed:
http://forum.xda-developers.com/showthread.php?t=2153261
Scroll down to: [ before we begin unlocking bootloader ]
Here 3 packages are given for fastboot drivers:
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
- Try another PC \ USB port \ USB calbe?
- Switch the phone OFF , hold the volume UP button while you plug-in the USB. (DO NOT PRESS POWER!) Blue led?
- Switch the phone OFF , hold the volume DOWN button while you plug-in the USB. (DO NOT PRESS POWER!) Green led?
Does any of these options work?
Kind regards, Stefan.
No change for me, works fine on another PC. But i want to be able to update that phone in my own home.
Thaevil0ne said:
- Make sure the phone has charge.
- Remove SD card from phone.
- Make sure the correct divers are installed:
http://forum.xda-developers.com/showthread.php?t=2153261
Scroll down to: [ before we begin unlocking bootloader ]
Here 3 packages are given for fastboot drivers:
download the fastboot package with usb drivers (alternate drivers if the ones in package dont work OR this)
- Try another PC \ USB port \ USB calbe?
- Switch the phone OFF , hold the volume UP button while you plug-in the USB. (DO NOT PRESS POWER!) Blue led?
- Switch the phone OFF , hold the volume DOWN button while you plug-in the USB. (DO NOT PRESS POWER!) Green led?
Does any of these options work?
Kind regards, Stefan.
Click to expand...
Click to collapse
hi, no one of both options works, also tried hard power off (3 x vibrations and then plugin while holding down/up)
anybody, i have sam problem too...Cant see that flashboot drivers are installed in flastoll?
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
anybody? i have same problem too...
Sauriann said:
anybody, i have sam problem too...Cant see that flashboot drivers are installed in flastoll?
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
anybody? i have same problem too...
Click to expand...
Click to collapse
Keep trying, not a lot else you can do.
Sent from my C6603 using xda premium
XperienceD said:
Keep trying, not a lot else you can do.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I got the same issue, cant get to fastboot mode, This issue maybe related to the registry, but i dont know how to deal with it.
Sent from my Nexus 4 using xda app-developers app
chungjimmybb said:
This issue maybe related to the registry, but i dont know how to deal with it.
Click to expand...
Click to collapse
Not sure why, it's usually more to do with user error, so simply retrace your steps and start over.
I tried via Sony PC Companion 2.1 and I get this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use these rom on Xperia Z:
Sauriann said:
I tried via Sony PC Companion 2.1 and I get this message:
Click to expand...
Click to collapse
So use the flashtool then, and read the stickys too.
I tried flashtool at least 20 times. Simply can not start the installation system (vol. down button + USB cable at the same time does not work!). SO, I can not put phone in flashmode enymore. Flashtool see phone in this mode for a few seconds and then stuck. On the phone i have green led for a sec, then nothing...
So any method that requires phone in flashmode is unusable.
Before this i use it (flashtool) several time normaly.
Sauriann said:
So any method that requires phone in flashmode is unusable.
Click to expand...
Click to collapse
Then you need to clean your computer of all things Sony, remove drivers etc and start over. http://developer.sonymobile.com/services/flash-tool/
XperienceD said:
Not sure why, it's usually more to do with user error, so simply retrace your steps and start over.
Click to expand...
Click to collapse
i got the same issue too and just tried in friend's computer with no luck. i am sure to stick with the flashtool guide step by step, but can't do fastboot mode yet.
Ok this (http://developer.sonymobile.com/services/flash-tool/) work, and this "flashtool" is Emma fom Sony Mobile.
Tnx for help.
keroro84 said:
I try to update my Xperia Z but while need press volume up button and plug in cable, nothing happen~~~
Click to expand...
Click to collapse
Wat kind of version do you use? The regular one or beta one?
Sent from my C6603 using xda app-developers app

Bricked, no solutions so far

I have a Verizon LG G2 VS980. The phone was rooted and running stock firmware.
I hit the "Update software" by mistake on a business trip and when the screen went black, I powered off the device in hopes of preventing the update (which I see now was a HUGE mistake.) Now, the phone only boots into fastboot mode. When I try to hold the vol + and power, it takes me straight into fastboot as well as the vol - and power.
I have tried to do the factory reset by holding vol - and power and then pressing it again when the LG splash screen shows. When I select to hard reset the phone, it goes into fastboot mode.
Now, when I plug the device into the computer, the computer will not recognize it. I am using the manufacturer's data cable, I have tried multiple USB ports, I have uninstalled and reinstalled the drivers countless times. Neither fastboot or ADB in command prompt recognize the device. However, the device does show that there is an android device plugged into the computer.
I have spent hours looking through every thread that addresses issues similar to this but I have not found a solution yet. What can I do from here?
First of all this belongs in Q&A not development.
Are you doing the hard key combo correctly? Power the phone down, when when it reboots is vibrates. When it vibrates you hold power and volume down. At the splash screen, you release it then hold them again.
Did you try this thread?
http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my Vs980 running Vanir 4.4.3
Yes, I have tried that method.
Chris.Thompson said:
Yes, I have tried that method.
Click to expand...
Click to collapse
When you held power up and volume on reboot, did you have it connected to the PC to see if you had download mode?
Sent from my Vs980 running Vanir 4.4.3
-check your device manager and see if your computer recognizes it.
-Try another computer.
-Another USB cable
Your computer should recognize it since you had it recognize it before.
Yes, I have tried multiple usb cables and have tried to get into download mode both plugged into the pc and unplugged.
Am I correct in assuming that step one needs to be to find out how to get the computer to recognize the device?
Chris.Thompson said:
Am I correct in assuming that step one needs to be to find out how to get the computer to recognize the device?
Click to expand...
Click to collapse
I wish I could help you out more, but you are definitely correct, computer has to recognize device...
Sent from my VS980 4G using XDA Premium 4 mobile app

completly dead moto g 4g 2nd gen, think i flashed something bad

I downloaded factory images and flashed the radio, modem, logo, everything. When i did fastboot reboot, the phone went black. Now it wont boot any mode and when connected to PC, Windows reports a malfunctioning USB device
hamzahrmalik said:
I downloaded factory images and flashed the radio, modem, logo, everything. When i did fastboot reboot, the phone went black. Now it wont boot any mode and when connected to PC, Windows reports a malfunctioning USB device
Click to expand...
Click to collapse
Connect to pc, press and hold power button until hear sound from pc device disconnected and connected. If is in device manager qusb bulk you are bricked phone. Try hard reset: press and hold the Power Button for a full 120 seconds while connected to a charger
steva-81 said:
Connect to pc, press and hold power button until hear sound from pc device disconnected and connected. If is in device manager qusb bulk you are bricked phone. Try hard reset: press and hold the Power Button for a full 120 seconds while connected to a charger
Click to expand...
Click to collapse
I found a guide saying if I can get t to be qusb bulk then I can fix it using some software. I'll try the hard reset thanks
Edit
here's the link to the guide
https://r.tapatalk.com/shareLink?ur...share_tid=2833798&share_fid=3793&share_type=t
[HOW TO] Unbrick hard bricked Moto G (for Android 4.4.4 (5.x now available))
Sent from my A0001 using Tapatalk
hamzahrmalik said:
I found a guide saying if I can get t to be qusb bulk then I can fix it using some software. I'll try the hard reset thanks
Edit
here's the link to the guide
https://r.tapatalk.com/shareLink?ur...share_tid=2833798&share_fid=3793&share_type=t
[HOW TO] Unbrick hard bricked Moto G (for Android 4.4.4 (5.x now available))
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Only first gen can be unbrick so far.
steva-81 said:
Only first gen can be unbrick so far.
Click to expand...
Click to collapse
I connected to charger and the led flashed white once. It won't flash again even if I unplug and connect again
EDIT
i connected to computer again. this time the white led flashes on for about 3 seconds then off for 3 etc. Nothing shows up on pc

Categories

Resources