Hi All,
I need to find the carrier ID for my XT1092 which is a UK Unlocked International Version.
I set it to "irl" during a ROM flash back to stock, which stops the APN setting up correctly.
If anyone has a UK unlocked edition can you goto the bootloader and run the command "fastboot oem config carrier" and output the results??
If should look like the picture attached, but the section "irl" should be something else.
attachment.php
I am on EMobile Ireland as the network, but expect the carrier ID to be a unlocked non region specfic one I think as the phone was bought direct from a supplier.
Thanks
Hi,
Has anyone a EU/UK unlocked to get the carrier ID?
Thanks
Anyone?
Hi Again,
Anyone out there able to help with checking their Carrier ID?
Thanks
Hi mate,
it might be strange, but I got the following output (unlocked bootlader, UK retail phone, retgb). Checked a couple of times, always the same.
$ fastboot oem config carrier
ERROR: could not get pipe properties
... INFO<UTAG name="carrier" protected="false">
INFO <value>
INFO </value>
INFO <description>
INFO Carrier IDs, see http://goo.gl/lojLh3
INFO </description>
INFO</UTAG>
I guess the command you mentioned is for changing the carrier only, it doesn't echoes the current value. I've googeled a bit and found the fastboot getvar all command, and maybe the last value of its output might be the carrier you'd need. I'm not an expert, so don't take it for granted, that's all I could figure out now.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 6011
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x2
(bootloader) emmc: 16GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: .....
(bootloader) cid: 0x0007
(bootloader) channelid: 0x41
(bootloader) uid: .....
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: .....
(bootloader) meid:
(bootloader) date: 12-06-2014
(bootloader) sku: XT1092
(bootloader) iccid:
(bootloader) cust_md5: .....
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 2 23:16:34 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retgb/victara:5.0
(bootloader) ro.build.fingerprint[1]: /LXE22.46-19/18:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.22.21.19.victara_ret
(bootloader) ro.build.version.full[1]: gb.retgball.en.GB
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_4125.184.08.27.01R VICTARA_E
(bootloader) version-baseband[1]: MEA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g4338799 ([email protected]
(bootloader) kernel.version[1]: ilclbld27) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Dec 4 10:30:40 CST 2014
(bootloader) sdi.git: git=MBM-NG-V60.11-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.11-0-g0d2c7a3
(bootloader) rpm.git: git=MBM-NG-V60.11-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.11-0-g1de0fa8
(bootloader) aboot.git: git=MBM-NG-V60.11-0-g72b218f
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: retgb
all: listed above
finished. total time: 0.109s
Fingers crossed it'll help.
Best,
j.e.d.
Strangely - all I get is a blank element for <value>. I'm also on retGB, unlocked bootloader as well. This handset was bought straight from Motorola's site.
fastboot oem config carrier
...
(bootloader) <UTAG name="carrier" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) Carrier IDs, see google link - not allowed to post, but same as yours
(bootloader) </description>
(bootloader) </UTAG>
jagw said:
Strangely - all I get is a blank element for <value>. I'm also on retGB, unlocked bootloader as well. This handset was bought straight from Motorola's site.
fastboot oem config carrier
...
(bootloader) <UTAG name="carrier" protected="false">
(bootloader) <value>
(bootloader) </value>
(bootloader) <description>
(bootloader) Carrier IDs, see google link - not allowed to post, but same as yours
(bootloader) </description>
(bootloader) </UTAG>
Click to expand...
Click to collapse
What"s really strange, since I ran that config command, I don't have a single SMS in Messages and can't restore it.
IrishLad said:
Hi Again,
Anyone out there able to help with checking their Carrier ID?
Thanks
Click to expand...
Click to collapse
You seemed to be too desperate not to reply at all.
Thanks
josecartman said:
You seemed to be too desperate not to reply at all.
Click to expand...
Click to collapse
Hi All,
Thanks for the replies, and my late check in, was travelling for work, I also had someone confirm for me via PM.
It does look like it should be blank, but I can't figure out how to remove the carrier ID I entered in error.
The issue it causes me is the APN, they appear to be setup but don't work, if I manually create them again it works fine with the same settings.
So I assume the ID is doing something odd.
Looking at flashing a complete custom ROM to hopefully erase the carrier ID then flash back to stock.
Unless anyone has any other advice I think I'll try this and post the results in the coming days.
Related
I recently bought this used cell phone, with android 5.1, I upgraded to the 6 stock (original motorola) but I now want to install a custom ROM, and for this I need to unlock the bootloader, but when I try to do this, this message appears in the command prompt "could Not get unlock data! ", I even tried a crazy on the internet some method to solve but what I found said that I should downgrade and go up rom, but I can not install another rom by RSD lite, I would like a method to be able Do the bootloader unlock and do root, exchange rom these things
roneyss93 said:
I recently bought this used cell phone, with android 5.1, I upgraded to the 6 stock (original motorola) but I now want to install a custom ROM, and for this I need to unlock the bootloader, but when I try to do this, this message appears in the command prompt "could Not get unlock data! ", I even tried a crazy on the internet some method to solve but what I found said that I should downgrade and go up rom, but I can not install another rom by RSD lite, I would like a method to be able Do the bootloader unlock and do root, exchange rom these things
Click to expand...
Click to collapse
You must have the unlock.bin from motorola official site to unlock bootloader.
After send the unlock.bin to your mail you move it to adb folder etc.
papsr6 said:
You must have the unlock.bin from motorola official site to unlock bootloader.
After send the unlock.bin to your mail you move it to adb folder etc.
Click to expand...
Click to collapse
The problem is that I do not even receive the code to unlock, before that happens it already appears that "could not get unlock data!" Which makes it impossible for me to unlock
roneyss93 said:
The problem is that I do not even receive the code to unlock, before that happens it already appears that "could not get unlock data!" Which makes it impossible for me to unlock
Click to expand...
Click to collapse
Did you enable Developer Options by going to Settings, About, tap Build Number 7 times, then go back, enable allow bootloader unlock and Android Debugging.
roneyss93 said:
The problem is that I do not even receive the code to unlock, before that happens it already appears that "could not get unlock data!" Which makes it impossible for me to unlock
Click to expand...
Click to collapse
Do it again you do something wrong.
I do the same and my fault is the wrong copy of numbers when i copy from commant window.
Gus Ghanem said:
Did you enable Developer Options by going to Settings, About, tap Build Number 7 times, then go back, enable allow bootloader unlock and Android Debugging.
Click to expand...
Click to collapse
I do exactly this, and it continues to give error
papsr6 said:
Do it again you do something wrong.
I do the same and my fault is the wrong copy of numbers when i copy from commant window.
Click to expand...
Click to collapse
I can not even get the numbers that we put on the Motorola site, I have unlocked Motorola before, however this nor give me the codes when I put the command to generate the codes
roneyss93 said:
I do exactly this, and it continues to give error
Click to expand...
Click to collapse
Do this just to get some info, no need to paste it here:
fastboot getvar all
In bootloader mode of course.
EDIT: You can get the latest fastboot and adb from here:
https://developer.android.com/studio/releases/platform-tools.html
Gus Ghanem said:
Do this just to get some info, no need to paste it here:
fastboot getvar all
In bootloader mode of course.
EDIT: You can get the latest fastboot and adb from here:
https://developer.android.com/studio/releases/platform-tools.html
Click to expand...
Click to collapse
Open again the CMD, the most updated according to the link that you sent me. And as a response the commands had this.
D:\Programas\Celular\MOTO X 2\root\platform-tools>fastboot getvar all
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: 6018
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: 0432146139
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: EC13870C0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 353320060936783
(bootloader) meid:
(bootloader) date: 2014-10-24
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Jul 5 12:11:27 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retbr/victara:6.0
(bootloader) ro.build.fingerprint[1]: /MPES24.49-18-7/7:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.7.victara_ret
(bootloader) ro.build.version.full[1]: br.retbr.en.BR
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_S
(bootloader) version-baseband[1]: INGLELA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:44:51 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V60.18-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.18-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V60.18-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.18-0-g4ad5029
(bootloader) aboot.git: git=MBM-NG-V60.18-0-g3b3b501
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.229s
D:\Programas\Celular\MOTO X 2\root\platform-tools>fastboot devices
0432146139 fastboot
D:\Programas\Celular\MOTO X 2\root\platform-tools>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Could not get unlock data!
OKAY [ 0.036s]
finished. total time: 0.036s
D:\Programas\Celular\MOTO X 2\root\platform-tools>
Remember that yes "OEM unlock" and "USB debugging" was enabled. As shown in the image.
Here is mine
(bootloader) version: 0.5
(bootloader) version-bootloader: 6100
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Sandisk REV=07 PRV=01 TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno:
(bootloader) cid: 0x000E
(bootloader) channelid: 0x80
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-12-2015
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 1 15:55:30 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retca/victara:6.0
(bootloader) ro.build.fingerprint[1]: /MPES24.49-18-7/7:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.7.victara_ret
(bootloader) ro.build.version.full[1]: ca.retca.en.CA
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_R
(bootloader) version-baseband[1]: ETCA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:53:00 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V61.00-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V61.00-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V61.00-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V61.00-0-gacbc999
(bootloader) aboot.git: git=MBM-NG-V61.00-0-g130760b
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: retca
Looks like your bootloader is older, but it shouldn't matter, I think I unlocked mine before the Android 6.0 update, I then relocked it, and unlocked it again a second time. I'm sure a lot of RETBR phones have been unlocked around here. I just can't see what the problem is. But don't try downgrading, you may brick the phone. I don't know what else to suggest. I'm sure you've installed the Motorola USB drivers, but I don't think that's the issue.
Try the Motorola (Lenovo) forums, you can submit your getvar to them, and they will send you an unlock code in a few days:
https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/230/thread-id/2654/page/1
Good Luck!
They have forums in Portugese.
Gus Ghanem said:
Here is mine
(bootloader) version: 0.5
(bootloader) version-bootloader: 6100
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Sandisk REV=07 PRV=01 TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno:
(bootloader) cid: 0x000E
(bootloader) channelid: 0x80
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-12-2015
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 1 15:55:30 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retca/victara:6.0
(bootloader) ro.build.fingerprint[1]: /MPES24.49-18-7/7:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.7.victara_ret
(bootloader) ro.build.version.full[1]: ca.retca.en.CA
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_R
(bootloader) version-baseband[1]: ETCA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:53:00 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V61.00-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V61.00-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V61.00-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V61.00-0-gacbc999
(bootloader) aboot.git: git=MBM-NG-V61.00-0-g130760b
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: retca
Looks like your bootloader is older, but it shouldn't matter, I think I unlocked mine before the Android 6.0 update, I then relocked it, and unlocked it again a second time. I'm sure a lot of RETBR phones have been unlocked around here. I just can't see what the problem is. But don't try downgrading, you may brick the phone. I don't know what else to suggest. I'm sure you've installed the Motorola USB drivers, but I don't think that's the issue.
Click to expand...
Click to collapse
I also do not know what the problem, I even tried to do the downgrade but does not accept any other android pq is not unlocked the bootloader.
I am stuck in the AP Fastboot Flash Mode (S). Recovery, Factory, BP Tools doesn't function, giving the same line "failed to validate xxx image". I can't flash stock ROMs through fastboot commands, all of those were "Failed". The bootloader lock can't even be unlocked, same reason above. Anybody from XDA can help me with this? I desperately tried almost everything on the forum and nothing has progressed so far. Here is the getvar-all information of my device:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 4887
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8400
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: ZX1D325JTJ
(bootloader) cid: 0x0009
(bootloader) channelid: 0x8d
(bootloader) uid: AAED95070F000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 359297055872880
(bootloader) meid:
(bootloader) date: 01-21-2015
(bootloader) sku: XT1063
(bootloader) battid: (null)
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Nov 1 4:11:27 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retuglb/titan_umts:
(bootloader) ro.build.fingerprint[1]: 6.0/MPBS24.65-34-4/6:user/release-
(bootloader) ro.build.fingerprint[2]: keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.4.titan_retug
(bootloader) ro.build.version.full[1]: lb.retuglb.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8626BP_1032.3116.99.00R RETUSA_GLB_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld36) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Wed Aug 24 07:20:10 CDT 2016
(bootloader) sdi.git: sdi.git
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) aboot.git: git=MBM-NG-V48.87-0-g1b80345
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe:
(bootloader) productid:
(bootloader) sutinfo:
(bootloader) ro.carrier: retus
all: listed above
finished. total time: 34.876s
I would really appreciate if somebody can solve this problem for me.
Hi! Sorry if im late, but did you use a 1 click flash tool? I reflashed 5.0.2 on my 1063 but i used a 6.0 flash tool and i got the same error! It got corrected once i used the correct flash tool
Angel064able said:
Hi! Sorry if im late, but did you use a 1 click flash tool? I reflashed 5.0.2 on my 1063 but i used a 6.0 flash tool and i got the same error! It got corrected once i used the correct flash tool
Click to expand...
Click to collapse
I used mfastboot and manually entered the codes. Where can I get that flashtool?
imnewbieplsnokick said:
I used mfastboot and manually entered the codes. Where can I get that flashtool?
Click to expand...
Click to collapse
I used this video:youtu.be/Jav4tIv5sCI
Credit to the creator.
Did you downgraded the ROM of your device? The one which comes out of the box? The chances are this happens when you flash downgraded Stock flash files on upgraded bootloader. Try flashing latest factory image available for your device and firstly re flash partition, boot, recovery and bootloader files. Then go for all other flash files serially. This solution 'might' help. Otherwise there's nothing you can do.
imnewbieplsnokick said:
I used mfastboot and manually entered the codes. Where can I get that flashtool?
Click to expand...
Click to collapse
Did you solved your issue? My device went to the same state while I was trying to relock the bootloader and re-unlocking it fixed it!
Angel064able said:
Did you solved your issue? My device went to the same state while I was trying to relock the bootloader and re-unlocking it fixed it!
Click to expand...
Click to collapse
Sorry, I was quite busy with my mid-semester. I tried it out and it didn't work. I guess it is dead now. However, I am thinking about breaking the phone, turning it into a hard-brick state and then reincarnate it back to life. Is it possible?
I'm very new to this, but I have a Motorola E5 Cruise (Cricket) that's network locked, ...sent my info to several unlocking sites and even tried a few, but so far they haven't been able to help, or tried to help but refunded me.
Other than doing a 6 month contract with Cricket to get them to network unlock, what are my options? I'd like to use this phone, but with straight talk rather than Cricket.
Is firmware for the Play & Cruise compatible? Please advise. Thanks a million!!!
RLBuddi said:
I'm very new to this, but I have a Motorola E5 Cruise (Cricket) that's network locked, ...sent my info to several unlocking sites and even tried a few, but so far they haven't been able to help, or tried to help but refunded me.
Other than doing a 6 month contract with Cricket to get them to network unlock, what are my options? I'd like to use this phone, but with straight talk rather than Cricket.
Is firmware for the Play & Cruise compatible? Please advise. Thanks a million!!!
Click to expand...
Click to collapse
I don't know, but you want to be careful about flash firmware for different model.
I would try to unlock the bootloader first
https://forum.xda-developers.com/showpost.php?p=80035798&postcount=115
Then
Check the getvar info
run
Code:
fastboot getvar all
Product = codename
securestate = bootloader locked or unlocked
carrier_sku = Model #
ro.carrier = Software Channel
Please post it here after you remove the IMEI line
Then you can compare software channels with the same model number
https://mirrors.lolinet.com/firmware/moto
If you find a retail software channel like RetUS
That is for the same model you might be able to
Either just flash the modem files
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Or the complete firmware
See
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
But this just a guess
Sent from my ali using XDA Labs
---------- Post added at 01:12 AM ---------- Previous post was at 01:09 AM ----------
If the bootloader cannot be unlocked
You might be able to just flash the modem files
But it would likely be less risky if bootloader is unlocked.
Sent from my ali using XDA Labs
C:\Adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.4A
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 9
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY322XV4G5
(bootloader) cid: 0x0001
(bootloader) channelid: 0x89
(bootloader) uid: DBA1266E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 07-27-2018
(bootloader) sku: XT1921-2
(bootloader) carrier_sku: XT1921-2
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Jan 4 6:42:31 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/james_a/james:8.0.0/OCP27
(bootloader) ro.build.fingerprint[1]: .91-157-28/2:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.341.2.james_a.a.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8920_34.26.11.76R JAMES_NA_ATT_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-ga94d3a1 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue Feb 4 05:47:07 CST
(bootloader) kernel.version[3]: 2020
(bootloader) sbl1.git: git=MBM-NG-VB9.4A-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=cc1477e
(bootloader) devcfg.git: git=cc1477e
(bootloader) keymaster.git: git=cc1477e
(bootloader) cmnlib.git: git=cc1477e
(bootloader) cmnlib64.git: git=cc1477e
(bootloader) prov.git: git=cc1477e
(bootloader) aboot.git: git=MBM-NG-VB9.4A-0-g4e376e8
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: cricket
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.363s
RLBuddi said:
C:\Adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.4A
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 9
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY322XV4G5
(bootloader) cid: 0x0001
(bootloader) channelid: 0x89
(bootloader) uid: DBA1266E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 07-27-2018
(bootloader) sku: XT1921-2
(bootloader) carrier_sku: XT1921-2
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Jan 4 6:42:31 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/james_a/james:8.0.0/OCP27
(bootloader) ro.build.fingerprint[1]: .91-157-28/2:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.341.2.james_a.a.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8920_34.26.11.76R JAMES_NA_ATT_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-ga94d3a1 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue Feb 4 05:47:07 CST
(bootloader) kernel.version[3]: 2020
(bootloader) sbl1.git: git=MBM-NG-VB9.4A-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=cc1477e
(bootloader) devcfg.git: git=cc1477e
(bootloader) keymaster.git: git=cc1477e
(bootloader) cmnlib.git: git=cc1477e
(bootloader) cmnlib64.git: git=cc1477e
(bootloader) prov.git: git=cc1477e
(bootloader) aboot.git: git=MBM-NG-VB9.4A-0-g4e376e8
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: cricket
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.363s
Click to expand...
Click to collapse
Does this device still boot normally?
Sent from my ali using XDA Labs
sd_shadow said:
Does this device still boot normally?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Yes, it boots no problem. I tried flashing the retail firmware for the same phone. It realized there was a size difference or something. Got up to step 11 ......11-20 failed
I'd tried to flash the modem files using the posted instructions, flashing was success. Still oem locked
RLBuddi said:
Yes, it boots no problem. I tried flashing the retail firmware for the same phone. It realized there was a size difference or something. Got up to step 11 ......11-20 failed
I'd tried to flash the modem files using the posted instructions, flashing was success. Still oem locked
Click to expand...
Click to collapse
Oem locked is different from carrier locked.
It's still carrier locked?
Sent from my ali using XDA Labs
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
If it's still carrier locked the thing to try is
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my ali using XDA Labs
sd_shadow said:
Oem locked is different from carrier locked.
It's still carrier locked?
Sent from my ali using XDA Labs
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
If it's still carrier locked the thing to try is
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Sorry bout the delay, ....Yes, it's still carrier locked. Thanks for your help!! It is very much appreciated!!! Also, checked out the link you provided.
Motorola global site does not list E5 Cruise (XT1921 2) as one that can be bootloader unlocked. Can the bootloader still be unlocked anyway?
RLBuddi said:
Sorry bout the delay, ....Yes, it's still carrier locked. Thanks for your help!! It is very much appreciated!!! Also, checked out the link you provided.
Motorola global site does not list E5 Cruise (XT1921 2) as one that can be bootloader unlocked. Can the bootloader still be unlocked anyway?
Click to expand...
Click to collapse
Moto has never listed every model that can be unlocked.
The only way to really know is go through the unlock steps.
Sent from my jerry_cheets using XDA Labs
sd_shadow said:
Moto has never listed every model that can be unlocked.
The only way to really know is go through the unlock steps.
Sent from my jerry_cheets using XDA Labs
Click to expand...
Click to collapse
Follow unlocking steps from the Moto site? Or elsewhere?
RLBuddi said:
Follow unlocking steps from the Moto site? Or elsewhere?
Click to expand...
Click to collapse
Yes, Moto site and I have some info here
https://forum.xda-developers.com/general/rooting-roms/guide-locking-motorola-bootloader-t4079111
Sent from my jerry_cheets using XDA Labs
I was happy using Pixel Experience but Some bugs are worrying me so A week back I thought to go back to stock oreo and downloaded the Official Firmware lastest version for my G5s Plus, I flashed it using fastboot commands and now the only issue is that I do not have any IMEI in my phone, No network and No Signal.
Only thing I am getting is my Carrier Name Jio4G also it is able to detect my phone number. IMEI is correctly being shown using this command "$ fastboot getvar imei" but my device is unable to detect it. I have tried several time flashing with fastboot commands and Lenovo Moto Software Assistant, nothing worked for me.
I have also tried to resintall Pixel Experience ROM but no IMEI(Imei 0). I have also tried several other roms like RR and AOSP Ex also Havoc OS, nothing worked for me. I have also tried to flash TWRP backup of my Stock ROM but still IMEI 0. For your information I have also tried Pixel Experience rom with erasing modemst1 and modemst2 method, nothing worked.
Finally I thought to take it to the Moto Service Center, they flashed my devices with their software, but no success of retrieving the IMEI, even worse they gave me one more issue, which is now I am unable to unlock the bootloader with my unlock key. When I try to unlock it it says, "Code validation failure with status 7". When I try to generate new unlock data it says "Unlock data unavailable (bootloader) Failed.
I am really worried for my device because this is my only device and I am a student , I can not afford a new phone right now.
I will really appreciate your help for my entire lifetime, this issue is really making me sick.
I am attaching my "fastboot getvar all" output-
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C2.07
(bootloader) product: sanders
(bootloader) board: sanders
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY322F8CL2
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: E320A71E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: "I AM HIDDING THIS FOR SECURITY PURPOSE, BUT IMEI IS VISIBLE HERE"
(bootloader) meid:
(bootloader) date: 12-11-2017
(bootloader) sku: XT1804
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jan 17 9:41:58 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/sanders_n/sanders_n:8.1.0
(bootloader) ro.build.fingerprint[1]: /OPS28.65-36-14/63857:user/release
(bootloader) ro.build.fingerprint[2]: -keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.271.12.sanders.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gfde333e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Aug 13 15:23:08 CDT 2019
(bootloader) sbl1.git: git=MBM-NG-VC2.07-0-gb564bed
(bootloader) rpm.git: git=5578f74
(bootloader) tz.git: git=82f94af-dirty
(bootloader) devcfg.git: git=82f94af-dirty
(bootloader) keymaster.git: git=82f94af-dirty
(bootloader) cmnlib.git: git=82f94af-dirty
(bootloader) cmnlib64.git: git=82f94af-dirty
(bootloader) prov.git: git=82f94af-dirty
(bootloader) aboot.git: git=MBM-NG-VC2.07-0-g37f20e1
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
all: listed above
Finished. Total time: 0.024s
hamhaingaurav said:
I was happy using Pixel Experience but Some bugs are worrying me so A week back I thought to go back to stock oreo and downloaded the Official Firmware lastest version for my G5s Plus, I flashed it using fastboot commands and now the only issue is that I do not have any IMEI in my phone, No network and No Signal.
Only thing I am getting is my Carrier Name Jio4G also it is able to detect my phone number. IMEI is correctly being shown using this command "$ fastboot getvar imei" but my device is unable to detect it. I have tried several time flashing with fastboot commands and Lenovo Moto Software Assistant, nothing worked for me.
I have also tried to resintall Pixel Experience ROM but no IMEI(Imei 0). I have also tried several other roms like RR and AOSP Ex also Havoc OS, nothing worked for me. I have also tried to flash TWRP backup of my Stock ROM but still IMEI 0. For your information I have also tried Pixel Experience rom with erasing modemst1 and modemst2 method, nothing worked.
Finally I thought to take it to the Moto Service Center, they flashed my devices with their software, but no success of retrieving the IMEI, even worse they gave me one more issue, which is now I am unable to unlock the bootloader with my unlock key. When I try to unlock it it says, "Code validation failure with status 7". When I try to generate new unlock data it says "Unlock data unavailable (bootloader) Failed.
I am really worried for my device because this is my only device and I am a student , I can not afford a new phone right now.
I will really appreciate your help for my entire lifetime, this issue is really making me sick.
I am attaching my "fastboot getvar all" output-
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C2.07
(bootloader) product: sanders
(bootloader) board: sanders
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY322F8CL2
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: E320A71E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: "I AM HIDDING THIS FOR SECURITY PURPOSE, BUT IMEI IS VISIBLE HERE"
(bootloader) meid:
(bootloader) date: 12-11-2017
(bootloader) sku: XT1804
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jan 17 9:41:58 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/sanders_n/sanders_n:8.1.0
(bootloader) ro.build.fingerprint[1]: /OPS28.65-36-14/63857:user/release
(bootloader) ro.build.fingerprint[2]: -keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.271.12.sanders.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gfde333e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Aug 13 15:23:08 CDT 2019
(bootloader) sbl1.git: git=MBM-NG-VC2.07-0-gb564bed
(bootloader) rpm.git: git=5578f74
(bootloader) tz.git: git=82f94af-dirty
(bootloader) devcfg.git: git=82f94af-dirty
(bootloader) keymaster.git: git=82f94af-dirty
(bootloader) cmnlib.git: git=82f94af-dirty
(bootloader) cmnlib64.git: git=82f94af-dirty
(bootloader) prov.git: git=82f94af-dirty
(bootloader) aboot.git: git=MBM-NG-VC2.07-0-g37f20e1
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
all: listed above
Finished. Total time: 0.024s
Click to expand...
Click to collapse
You just mess your device with locked bootloader, there are not many things that can be done with locked bootloader. But still you can try this method.
https://forum.xda-developers.com/g5...solve-imei0-explanation-t3825147/post77249207
And try to unlock the bootloader, with unlock bootloader there could be some hope of recovery.
riyan65 said:
You just mess your device with locked bootloader, there are not many things that can be done with locked bootloader. But still you can try this method.
https://forum.xda-developers.com/g5...solve-imei0-explanation-t3825147/post77249207
And try to unlock the bootloader, with unlock bootloader there could be some hope of recovery.
Click to expand...
Click to collapse
Yes, I knwo there is an hope if i can unlock the bootloader, but the service center guy messed my device, I do not know how they flashed my device, they were flashing my device and said it is not turning on, i said okay return my device, i will flash it my self and after taking from them, i was trying to unlock the bootloader and I was getting the error "Code validation failure with status 7". I am also unable to get Unlock data.
What can i do now, is there any solution to it. Do i need to take my device to service center again ???
Try flashing april stock....then do the OTA update till August..
vivek1310yadav said:
Try flashing april stock....then do the OTA update till August..
Click to expand...
Click to collapse
Did it already and it have not solved my problem, There is one more issue on my phone, Whenever I flash my device with Retail and Retin verion it always shows my Harddware version as /x/x/x/x instead of PVT.
Go to settings>abount phone>hardware information then look at the version , in my case it is /x/x/x/x, because of which some of my sensors are not working.
My device is really messed up.
hamhaingaurav said:
Did it already and it have not solved my problem, There is one more issue on my phone, Whenever I flash my device with Retail and Retin verion it always shows my Harddware version as /x/x/x/x instead of PVT.
Go to settings>abount phone>hardware information then look at the version , in my case it is /x/x/x/x, because of which some of my sensors are not working.
My device is really messed up.
Click to expand...
Click to collapse
PM me..
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
But all fail with "failed validation";
Unlock fails, but I cannot boot in Android to change mentioned option:
Code:
mfastboot-v2> .\mfastboot oem unlock XSVDURWNGOWYDFMGU5ZT
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.057s
RSD Lite to flash stock ROM doesn't see my device.
Rescue and Smart Assistant cannot proceed due to "missing version-baseband:" (see empty var listed below).
Code:
mfastboot-v2> .\mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4821
(bootloader) product: thea
(bootloader) secure: yes
(bootloader) hwrev: 0x8300
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Toshiba REV=06 PRV=51 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2272TX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C96B590915000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 2
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from mot-charger boot mode
(bootloader) imei: 353310061467870
(bootloader) meid:
(bootloader) date: 04-28-2015
(bootloader) sku: XT1072
(bootloader) battid: SNN5956A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Sep 16 3: 2:45 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.5.thea_reteu.
(bootloader) ro.build.version.full[1]: reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Sat Sep 10 01:48:29 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V48.21-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.21-0-gbffe41a
(bootloader) rpm.git: git=MBM-NG-V48.21-0-gbe53f43
(bootloader) tz.git: git=MBM-NG-V48.21-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.21-0-gd8d8d9e
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1C2272TX
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.105s
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
enricocava said:
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
Click to expand...
Click to collapse
Sometimes the bootloader will relock, when using a custom recovery is used.
I'm not sure why usually when trying to install a rom.
It's very common, but it happens on many Moto devices.
enricocava said:
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
Click to expand...
Click to collapse
That will have made it worse.
enricocava said:
But all fail with "failed validation";
Unlocking fails with "Please allow OEM unlock from developer options", but Android is not booting so I cannot change it.
RSD Lite to flash stock ROM doesn't see my device.
Click to expand...
Click to collapse
RSD Lite doesn't work with Windows 9/10/11
Use XP/7
enricocava said:
Rescue and Smart Assistant cannot proceed due to "missing base version" (string is not correct, I'll chek it later).
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Thank you for your quick reply.
sd_shadow said:
RSD Lite doesn't work with Windows 9/10/11
Use XP/7
Click to expand...
Click to collapse
Colud it work on a Win7 on a Virtual machine or does it need direct access to USB ports? At the moment I have not an old Windows available.
sd_shadow said:
What does getvar all say?
Click to expand...
Click to collapse
I updated the original post.
sd_shadow said:
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I missed this post, I'll take a look.
enricocava said:
Hi all,
I had a XT1072 with Android 6 and wanted to go back to 5 due to problems with GPS.
I unlocked the boot loader, flashed stock ROM with Android 6 and all was fine.
I next tried to flash stock ROM with Android 5 and was stuck in fast boot with errors like "invalid system image signature" or similar.
Next I messed around with TWRP, stock again, lock, unlock... a mess.
Now it's stuck in fastboot with status "LOCKED, status code 2" (0 is LOCKED, 3 UNLOCKED, 2 what is it?)
I tried flashing stock ROM both 5 and 6 in different versions:
RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETESALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
RETGBALL_XT1072_5.0.2_LXB22.99-24_cid7_subsidy-DEFAULT_CFC.xml
Motorola_Moto_G2_XT1072_MPB24.65-34_CID12_6.0
But all fail with "failed validation";
Unlock fails, but I cannot boot in Android to change mentioned option:
Code:
mfastboot-v2> .\mfastboot oem unlock XSVDURWNGOWYDFMGU5ZT
...
(bootloader) Check 'Allow OEM Unlock' in Developer Options.
FAILED (remote failure)
finished. total time: 0.057s
RSD Lite to flash stock ROM doesn't see my device.
Rescue and Smart Assistant cannot proceed due to "missing version-baseband:" (see empty var listed below).
Code:
mfastboot-v2> .\mfastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4821
(bootloader) product: thea
(bootloader) secure: yes
(bootloader) hwrev: 0x8300
(bootloader) radio: 0x3
(bootloader) emmc: 8GB Toshiba REV=06 PRV=51 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2272TX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C96B590915000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 2
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from mot-charger boot mode
(bootloader) imei: 353310061467870
(bootloader) meid:
(bootloader) date: 04-28-2015
(bootloader) sku: XT1072
(bootloader) battid: SNN5956A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Sep 16 3: 2:45 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.5.thea_reteu.
(bootloader) ro.build.version.full[1]: reteuall.en.EU
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Sat Sep 10 01:48:29 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V48.21-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.21-0-gbffe41a
(bootloader) rpm.git: git=MBM-NG-V48.21-0-gbe53f43
(bootloader) tz.git: git=MBM-NG-V48.21-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.21-0-gd8d8d9e
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1C2272TX
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.105s
Do you have any suggestions to restore it?
Let me know if I can give you more information.
Thanks
Click to expand...
Click to collapse
Code:
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
This should be the correct firmware
https://mirrors-obs-2.lolinet.com/firmware/motorola/2015/thea/official/RETEU/
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT_CFC.xml.zip
Try flashing
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then flash the firmware using the flash_file.xml as reference.
sd_shadow said:
Code:
(bootloader) ro.build.fingerprint[0]: motorola/thea_reteu/thea:6.0/MPBS2
(bootloader) ro.build.fingerprint[1]: 4.65-34-5/6:user/release-keys
This should be the correct firmware
https://mirrors-obs-2.lolinet.com/firmware/motorola/2015/thea/official/RETEU/
XT1072_THEA_RETEU_6.0_MPBS24.65-34-5_cid7_subsidy-DEFAULT_CFC.xml.zip
Try flashing
Code:
fastboot flash partition gpt.bin
fastboot reboot bootloader
Then flash the firmware using the flash_file.xml as reference.
Click to expand...
Click to collapse
Thank you, it worked! So the problem was the wrong fw version and messing up gpt with random commands, right?
For a downgrade I can follow this one, right? https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/post-84863341
enricocava said:
Thank you, it worked! So the problem was the wrong fw version and messing up gpt with random commands, right?
Click to expand...
Click to collapse
I believe so
enricocava said:
For a downgrade I can follow this one, right? https://forum.xda-developers.com/t/guide-flashing-motorola-firmware.4042039/post-84863341
Click to expand...
Click to collapse
Do not downgrade unless the bootloader says unlocked again.
If the bootloader is reported as unlocked again,
sure you should be able to downgrade the firmware.