I recently bought this used cell phone, with android 5.1, I upgraded to the 6 stock (original motorola) but I now want to install a custom ROM, and for this I need to unlock the bootloader, but when I try to do this, this message appears in the command prompt "could Not get unlock data! ", I even tried a crazy on the internet some method to solve but what I found said that I should downgrade and go up rom, but I can not install another rom by RSD lite, I would like a method to be able Do the bootloader unlock and do root, exchange rom these things
roneyss93 said:
I recently bought this used cell phone, with android 5.1, I upgraded to the 6 stock (original motorola) but I now want to install a custom ROM, and for this I need to unlock the bootloader, but when I try to do this, this message appears in the command prompt "could Not get unlock data! ", I even tried a crazy on the internet some method to solve but what I found said that I should downgrade and go up rom, but I can not install another rom by RSD lite, I would like a method to be able Do the bootloader unlock and do root, exchange rom these things
Click to expand...
Click to collapse
You must have the unlock.bin from motorola official site to unlock bootloader.
After send the unlock.bin to your mail you move it to adb folder etc.
papsr6 said:
You must have the unlock.bin from motorola official site to unlock bootloader.
After send the unlock.bin to your mail you move it to adb folder etc.
Click to expand...
Click to collapse
The problem is that I do not even receive the code to unlock, before that happens it already appears that "could not get unlock data!" Which makes it impossible for me to unlock
roneyss93 said:
The problem is that I do not even receive the code to unlock, before that happens it already appears that "could not get unlock data!" Which makes it impossible for me to unlock
Click to expand...
Click to collapse
Did you enable Developer Options by going to Settings, About, tap Build Number 7 times, then go back, enable allow bootloader unlock and Android Debugging.
roneyss93 said:
The problem is that I do not even receive the code to unlock, before that happens it already appears that "could not get unlock data!" Which makes it impossible for me to unlock
Click to expand...
Click to collapse
Do it again you do something wrong.
I do the same and my fault is the wrong copy of numbers when i copy from commant window.
Gus Ghanem said:
Did you enable Developer Options by going to Settings, About, tap Build Number 7 times, then go back, enable allow bootloader unlock and Android Debugging.
Click to expand...
Click to collapse
I do exactly this, and it continues to give error
papsr6 said:
Do it again you do something wrong.
I do the same and my fault is the wrong copy of numbers when i copy from commant window.
Click to expand...
Click to collapse
I can not even get the numbers that we put on the Motorola site, I have unlocked Motorola before, however this nor give me the codes when I put the command to generate the codes
roneyss93 said:
I do exactly this, and it continues to give error
Click to expand...
Click to collapse
Do this just to get some info, no need to paste it here:
fastboot getvar all
In bootloader mode of course.
EDIT: You can get the latest fastboot and adb from here:
https://developer.android.com/studio/releases/platform-tools.html
Gus Ghanem said:
Do this just to get some info, no need to paste it here:
fastboot getvar all
In bootloader mode of course.
EDIT: You can get the latest fastboot and adb from here:
https://developer.android.com/studio/releases/platform-tools.html
Click to expand...
Click to collapse
Open again the CMD, the most updated according to the link that you sent me. And as a response the commands had this.
D:\Programas\Celular\MOTO X 2\root\platform-tools>fastboot getvar all
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: 6018
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: 0432146139
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: EC13870C0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 353320060936783
(bootloader) meid:
(bootloader) date: 2014-10-24
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Jul 5 12:11:27 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retbr/victara:6.0
(bootloader) ro.build.fingerprint[1]: /MPES24.49-18-7/7:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.7.victara_ret
(bootloader) ro.build.version.full[1]: br.retbr.en.BR
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_S
(bootloader) version-baseband[1]: INGLELA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld71) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:44:51 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V60.18-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.18-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V60.18-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.18-0-g4ad5029
(bootloader) aboot.git: git=MBM-NG-V60.18-0-g3b3b501
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: unknown
all: listed above
finished. total time: 0.229s
D:\Programas\Celular\MOTO X 2\root\platform-tools>fastboot devices
0432146139 fastboot
D:\Programas\Celular\MOTO X 2\root\platform-tools>fastboot oem get_unlock_data
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) Could not get unlock data!
OKAY [ 0.036s]
finished. total time: 0.036s
D:\Programas\Celular\MOTO X 2\root\platform-tools>
Remember that yes "OEM unlock" and "USB debugging" was enabled. As shown in the image.
Here is mine
(bootloader) version: 0.5
(bootloader) version-bootloader: 6100
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Sandisk REV=07 PRV=01 TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno:
(bootloader) cid: 0x000E
(bootloader) channelid: 0x80
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-12-2015
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 1 15:55:30 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retca/victara:6.0
(bootloader) ro.build.fingerprint[1]: /MPES24.49-18-7/7:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.7.victara_ret
(bootloader) ro.build.version.full[1]: ca.retca.en.CA
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_R
(bootloader) version-baseband[1]: ETCA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:53:00 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V61.00-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V61.00-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V61.00-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V61.00-0-gacbc999
(bootloader) aboot.git: git=MBM-NG-V61.00-0-g130760b
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: retca
Looks like your bootloader is older, but it shouldn't matter, I think I unlocked mine before the Android 6.0 update, I then relocked it, and unlocked it again a second time. I'm sure a lot of RETBR phones have been unlocked around here. I just can't see what the problem is. But don't try downgrading, you may brick the phone. I don't know what else to suggest. I'm sure you've installed the Motorola USB drivers, but I don't think that's the issue.
Try the Motorola (Lenovo) forums, you can submit your getvar to them, and they will send you an unlock code in a few days:
https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/230/thread-id/2654/page/1
Good Luck!
They have forums in Portugese.
Gus Ghanem said:
Here is mine
(bootloader) version: 0.5
(bootloader) version-bootloader: 6100
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Sandisk REV=07 PRV=01 TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno:
(bootloader) cid: 0x000E
(bootloader) channelid: 0x80
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-12-2015
(bootloader) sku: XT1097
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Sep 1 15:55:30 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/victara_retca/victara:6.0
(bootloader) ro.build.fingerprint[1]: /MPES24.49-18-7/7:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.24.221.7.victara_ret
(bootloader) ro.build.version.full[1]: ca.retca.en.CA
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_42352121.25.09.24R VICTARA_R
(bootloader) version-baseband[1]: ETCA_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g0dad312 ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Sep 1 10:53:00 CDT 2016
(bootloader) sdi.git: git=MBM-NG-V61.00-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V61.00-0-g5147b20
(bootloader) rpm.git: git=MBM-NG-V61.00-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V61.00-0-gacbc999
(bootloader) aboot.git: git=MBM-NG-V61.00-0-g130760b
(bootloader) qe: qe 0/1
(bootloader) ro.carrier: retca
Looks like your bootloader is older, but it shouldn't matter, I think I unlocked mine before the Android 6.0 update, I then relocked it, and unlocked it again a second time. I'm sure a lot of RETBR phones have been unlocked around here. I just can't see what the problem is. But don't try downgrading, you may brick the phone. I don't know what else to suggest. I'm sure you've installed the Motorola USB drivers, but I don't think that's the issue.
Click to expand...
Click to collapse
I also do not know what the problem, I even tried to do the downgrade but does not accept any other android pq is not unlocked the bootloader.
Related
As subject states.
Just got an RMA for my bricked MotoX (2014)/XT1096 and for whatever reason this one says it cannot be unlocked via the Motorola website. Anyone else having problems?
The plot thickens...just booted into Fastboot, and I remind you, this is a brand new phone - "Software status: Modified".
Chatting with customer service right now.
Double check the token code while pasting ,
Sent from my XT1096 using Tapatalk
mtoomey, did you have any luck?
I have the exact same problem (with repaired moto x) and the person I chatted didn't even think vzw moto x can be unlocked. So yeah...that didn't get me far...
mtoomey79 said:
The plot thickens...just booted into Fastboot, and I remind you, this is a brand new phone - "Software status: Modified".
Chatting with customer service right now.
Click to expand...
Click to collapse
Could it already have the bootloader unlocked?
Maybe try to fastboot TWRP?
I had to go through customer service (all the way up to the lead tech or whatever) to get a code, but it worked.
So if anyone else is in this situation, just call and keep insisting that it's possible to unlock the bootloader and get transferred until you get someone who knows something (nothing against CS reps - they aren't given the knowledge to actually handle these kind of requests)
razi914 said:
Double check the token code while pasting
Click to expand...
Click to collapse
C:\SDK\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x4
(bootloader) emmc: 32GB Sandisk REV=07 PRV=01 TYPE=57
(bootloader) ram: 2048MB Samsung S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA468009Y4
(bootloader) cid: 0x0002
(bootloader) channelid: 0x00
(bootloader) uid: 6DE22E0C0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 990005083791948
(bootloader) meid:
(bootloader) date: 01-12-2016
(bootloader) sku: XT1096
(bootloader) iccid:
(bootloader) cust_md5: 67ACD4581D8A082111B26C92396C9893
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Aug 16 4:19:54 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/victara_verizon/victara:5
(bootloader) ro.build.fingerprint[1]: .1/LPE23.32-25-5/13:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) ro.build.version.full[0]: Blur_Version.23.16.5.victara_veri
(bootloader) ro.build.version.full[1]: zon.verizon.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_4235210.110.09.13R VICTARA_V
(bootloader) version-baseband[1]: ZW_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g19638c4 ([email protected]
(bootloader) kernel.version[1]: ilclbld33) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Mon Aug 17 22:49:57 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: vzw
all: listed above
finished. total time: 0.201s
jmsfang said:
mtoomey, did you have any luck?
I have the exact same problem (with repaired moto x) and the person I chatted didn't even think vzw moto x can be unlocked. So yeah...that didn't get me far...
Click to expand...
Click to collapse
Not yet. In a chat with them now...
moto x 2nd gen
was trying to upgrade to marshmallow and the person i bought from gave me the xt1092 link. went on with it and now i have a paperweight stuck in fastboot mode.. tried restoring back to xt1096 via fastboot, mfastboot and rsdlite
while doing it i am getting version downgraded for primary gpt, hab error, invalid piv image
any guru who can provide any help would be appreciated
get var all data below
C:\Phone\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x4
(bootloader) emmc: 16GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA99218ZUS
(bootloader) cid: 0x0002
(bootloader) channelid: 0x83
(bootloader) uid: 2EEA0E0D0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 990005080698989
(bootloader) meid:
(bootloader) date: 10-18-2014
(bootloader) sku: XT1096
(bootloader) iccid: 89148000001390856408
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Nov 19 18:48:29 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/victara_verizon/victara:5
(bootloader) ro.build.fingerprint[1]: .0/LXE22.46-11/11:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.22.21.11.victara_ver
(bootloader) ro.build.version.full[1]: izon.verizon.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-ga88ac50 ([email protected]
(bootloader) kernel.version[1]: ilclbld73) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Nov 20 04:01:54 CST 2014
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: vzw
all: listed above
Try unlocking your bootloader from motorola site, last o heared Verizon started too unlock bootloader of x2 from mototola site. If you can unlock bootloader do it and after that flash xt1092 rom it will pass through.
astalavistadear said:
moto x 2nd gen
was trying to upgrade to marshmallow and the person i bought from gave me the xt1092 link. went on with it and now i have a paperweight stuck in fastboot mode.. tried restoring back to xt1096 via fastboot, mfastboot and rsdlite
while doing it i am getting version downgraded for primary gpt, hab error, invalid piv image
any guru who can provide any help would be appreciated
get var all data below
C:\Phone\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x4
(bootloader) emmc: 16GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA99218ZUS
(bootloader) cid: 0x0002
(bootloader) channelid: 0x83
(bootloader) uid: 2EEA0E0D0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 990005080698989
(bootloader) meid:
(bootloader) date: 10-18-2014
(bootloader) sku: XT1096
(bootloader) iccid: 89148000001390856408
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Nov 19 18:48:29 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/victara_verizon/victara:5
(bootloader) ro.build.fingerprint[1]: .0/LXE22.46-11/11:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) ro.build.version.full[0]: Blur_Version.22.21.11.victara_ver
(bootloader) ro.build.version.full[1]: izon.verizon.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-ga88ac50 ([email protected]
(bootloader) kernel.version[1]: ilclbld73) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Thu Nov 20 04:01:54 CST 2014
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: vzw
all: listed above
Click to expand...
Click to collapse
Salik Iqbal said:
Try unlocking your bootloader from motorola site, last o heared Verizon started too unlock bootloader of x2 from mototola site. If you can unlock bootloader do it and after that flash xt1092 rom it will pass through.
Click to expand...
Click to collapse
its giving an error
"enable oem unlock from developer options"
bump
Did you go into developer options in settings and check oem unlock?
astalavistadear said:
bump
Click to expand...
Click to collapse
Archangel said:
Did you go into developer options in settings and check oem unlock?
Click to expand...
Click to collapse
Since he is stuck in fastboot, I assume not.
Just reflash stock whatever firmware you were on before you tried upgrading. You can do this with all fastboot commands. Your phone is far from a "paper weight" if you can still get into fastboot, most classify this as a "soft brick."
Instructions on flashing the stock firmware can be found on the Moto X FAQ. https://forum.xda-developers.com/moto-x-2014/help/wip-frequently-questions-moto-x-2014-t2876769
Alternatively, I'm a huge fan of House of Moto: http://www.droidrzr.com/topic/61124-house-of-moto-43/ - automates a lot of the flashing process for you. I like to always have an install of House of Moto ready to roll incase of soft bricking.
xKroniK13x said:
Since he is stuck in fastboot, I assume not.
Just reflash stock whatever firmware you were on before you tried upgrading. You can do this with all fastboot commands. Your phone is far from a "paper weight" if you can still get into fastboot, most classify this as a "soft brick."
Instructions on flashing the stock firmware can be found on the Moto X FAQ. https://forum.xda-developers.com/moto-x-2014/help/wip-frequently-questions-moto-x-2014-t2876769
Alternatively, I'm a huge fan of House of Moto: http://www.droidrzr.com/topic/61124-house-of-moto-43/ - automates a lot of the flashing process for you. I like to always have an install of House of Moto ready to roll incase of soft bricking.
Click to expand...
Click to collapse
hi.. sorry for such a late and random reply... had been stuck in a family emergency
i am getting the same error by your methods..
failed- version downgraded for boot
astalavistadear said:
hi.. sorry for such a late and random reply... had been stuck in a family emergency
i am getting the same error by your methods..
failed- version downgraded for boot
Click to expand...
Click to collapse
Sounds like you probably aren't using the correct firmware version.
mfastboot.exe flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (256352 KB)...
OKAY [ 9.646s]
writing 'system'...
(bootloader) Invalid signed image
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 9.762s
astalavistadear said:
hi.. sorry for such a late and random reply... had been stuck in a family emergency
i am getting the same error by your methods..
failed- version downgraded for boot
Click to expand...
Click to collapse
i flashed a wrong version earlier as the guy i bought from said it was ok to flash xt1092 on xt1096.. 1096 wasnt getting updates post lollipop... and was stuck... now when m trying to get 1096 to flash back... m stuck with these errors
Hello, I have a moto g 2014 xt1063 , from a friend who gave it to me to repair it (which left me with no more remedies to consult, since I read everywhere and still, I do not find any solution)
The phone gave me already in fastboot mode, with different errors to enter the recovery (boot up) and no way to install a stock, since in all I get "FAILED (remote failure)"
In the roms that I have tried (the ones that are supposed to be stocks for this type of phone). The skinny to know nothing android, I did not know in which stock version was (if 4.4.4 or 5.0.2) I put a fastboot getvar all and I throw this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 4807(*)
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8400
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: ZX1D726FMS
(bootloader) cid: 0x000C
(bootloader) channelid: 0x05
(bootloader) uid: B6331F080F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Fall-through from recovery boot mode
(bootloader) imei: 353332060924115
(bootloader) meid:
(bootloader) date: 06-20-2015
(bootloader) sku: XT1063
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Jun 27 12:40:47 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retla/titan_umts:4.
(bootloader) ro.build.fingerprint[1]: 4.4/KXB21.85-23/30:user/release-ke
(bootloader) ro.build.fingerprint[2]: ys
(bootloader) ro.build.version.full[0]: Blur_Version.21.11.23.titan_retla
(bootloader) ro.build.version.full[1]: .retla.en.01
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g668a77b ([email protected]
(bootloader) kernel.version[1]: ilclbld31) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Aug 26 20:03:02 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V48.07-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.07-0-g683cb0c
(bootloader) rpm.git: git=MBM-NG-V48.07-0-g71b1aae-dirty
(bootloader) tz.git: git=MBM-NG-V48.07-0-ga27c415
(bootloader) aboot.git: git=MBM-NG-V48.07-0-ge875a20
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1D726FMS
(bootloader) sutinfo:
all: listed above
finished. total time: 0.062s
I assumed by what I said that it was a 4.4.4 download from here, the stock firmware, however as I said above the blessed error in the fastboot FAILED (remote failure)
In each command set, the bootloader is unlocked. I already probe with fastboot oem fb_mode_clear, and other things reviewed in xda. I do not know what else to do ... Any solutions? (Clarify the bootloader also throws me the error (bootloader) Failed to flash partition recovery, but by reading does not matter said error)
Now at the moment, after several attempts, I get this "fastboot reason: failure-through from boot boot mode" error.
Try to put a TWRP recovery for titan (do not try some cyanogen), since the errors when flashing the recovery are the same that always throw me.
If you need more information, let me know.
Sorry for my horrible English. I speak Spanish, by the doubts.
From already thank you very much!
I am stuck in the AP Fastboot Flash Mode (S). Recovery, Factory, BP Tools doesn't function, giving the same line "failed to validate xxx image". I can't flash stock ROMs through fastboot commands, all of those were "Failed". The bootloader lock can't even be unlocked, same reason above. Anybody from XDA can help me with this? I desperately tried almost everything on the forum and nothing has progressed so far. Here is the getvar-all information of my device:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 4887
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8400
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: ZX1D325JTJ
(bootloader) cid: 0x0009
(bootloader) channelid: 0x8d
(bootloader) uid: AAED95070F000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 359297055872880
(bootloader) meid:
(bootloader) date: 01-21-2015
(bootloader) sku: XT1063
(bootloader) battid: (null)
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Nov 1 4:11:27 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retuglb/titan_umts:
(bootloader) ro.build.fingerprint[1]: 6.0/MPBS24.65-34-4/6:user/release-
(bootloader) ro.build.fingerprint[2]: keys
(bootloader) ro.build.version.full[0]: Blur_Version.24.201.4.titan_retug
(bootloader) ro.build.version.full[1]: lb.retuglb.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8626BP_1032.3116.99.00R RETUSA_GLB_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-g495dfd8 ([email protected]
(bootloader) kernel.version[1]: ilclbld36) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Wed Aug 24 07:20:10 CDT 2016
(bootloader) sdi.git: sdi.git
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) aboot.git: git=MBM-NG-V48.87-0-g1b80345
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe:
(bootloader) productid:
(bootloader) sutinfo:
(bootloader) ro.carrier: retus
all: listed above
finished. total time: 34.876s
I would really appreciate if somebody can solve this problem for me.
Hi! Sorry if im late, but did you use a 1 click flash tool? I reflashed 5.0.2 on my 1063 but i used a 6.0 flash tool and i got the same error! It got corrected once i used the correct flash tool
Angel064able said:
Hi! Sorry if im late, but did you use a 1 click flash tool? I reflashed 5.0.2 on my 1063 but i used a 6.0 flash tool and i got the same error! It got corrected once i used the correct flash tool
Click to expand...
Click to collapse
I used mfastboot and manually entered the codes. Where can I get that flashtool?
imnewbieplsnokick said:
I used mfastboot and manually entered the codes. Where can I get that flashtool?
Click to expand...
Click to collapse
I used this video:youtu.be/Jav4tIv5sCI
Credit to the creator.
Did you downgraded the ROM of your device? The one which comes out of the box? The chances are this happens when you flash downgraded Stock flash files on upgraded bootloader. Try flashing latest factory image available for your device and firstly re flash partition, boot, recovery and bootloader files. Then go for all other flash files serially. This solution 'might' help. Otherwise there's nothing you can do.
imnewbieplsnokick said:
I used mfastboot and manually entered the codes. Where can I get that flashtool?
Click to expand...
Click to collapse
Did you solved your issue? My device went to the same state while I was trying to relock the bootloader and re-unlocking it fixed it!
Angel064able said:
Did you solved your issue? My device went to the same state while I was trying to relock the bootloader and re-unlocking it fixed it!
Click to expand...
Click to collapse
Sorry, I was quite busy with my mid-semester. I tried it out and it didn't work. I guess it is dead now. However, I am thinking about breaking the phone, turning it into a hard-brick state and then reincarnate it back to life. Is it possible?
I was happy using Pixel Experience but Some bugs are worrying me so A week back I thought to go back to stock oreo and downloaded the Official Firmware lastest version for my G5s Plus, I flashed it using fastboot commands and now the only issue is that I do not have any IMEI in my phone, No network and No Signal.
Only thing I am getting is my Carrier Name Jio4G also it is able to detect my phone number. IMEI is correctly being shown using this command "$ fastboot getvar imei" but my device is unable to detect it. I have tried several time flashing with fastboot commands and Lenovo Moto Software Assistant, nothing worked for me.
I have also tried to resintall Pixel Experience ROM but no IMEI(Imei 0). I have also tried several other roms like RR and AOSP Ex also Havoc OS, nothing worked for me. I have also tried to flash TWRP backup of my Stock ROM but still IMEI 0. For your information I have also tried Pixel Experience rom with erasing modemst1 and modemst2 method, nothing worked.
Finally I thought to take it to the Moto Service Center, they flashed my devices with their software, but no success of retrieving the IMEI, even worse they gave me one more issue, which is now I am unable to unlock the bootloader with my unlock key. When I try to unlock it it says, "Code validation failure with status 7". When I try to generate new unlock data it says "Unlock data unavailable (bootloader) Failed.
I am really worried for my device because this is my only device and I am a student , I can not afford a new phone right now.
I will really appreciate your help for my entire lifetime, this issue is really making me sick.
I am attaching my "fastboot getvar all" output-
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C2.07
(bootloader) product: sanders
(bootloader) board: sanders
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY322F8CL2
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: E320A71E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: "I AM HIDDING THIS FOR SECURITY PURPOSE, BUT IMEI IS VISIBLE HERE"
(bootloader) meid:
(bootloader) date: 12-11-2017
(bootloader) sku: XT1804
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jan 17 9:41:58 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/sanders_n/sanders_n:8.1.0
(bootloader) ro.build.fingerprint[1]: /OPS28.65-36-14/63857:user/release
(bootloader) ro.build.fingerprint[2]: -keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.271.12.sanders.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gfde333e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Aug 13 15:23:08 CDT 2019
(bootloader) sbl1.git: git=MBM-NG-VC2.07-0-gb564bed
(bootloader) rpm.git: git=5578f74
(bootloader) tz.git: git=82f94af-dirty
(bootloader) devcfg.git: git=82f94af-dirty
(bootloader) keymaster.git: git=82f94af-dirty
(bootloader) cmnlib.git: git=82f94af-dirty
(bootloader) cmnlib64.git: git=82f94af-dirty
(bootloader) prov.git: git=82f94af-dirty
(bootloader) aboot.git: git=MBM-NG-VC2.07-0-g37f20e1
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
all: listed above
Finished. Total time: 0.024s
hamhaingaurav said:
I was happy using Pixel Experience but Some bugs are worrying me so A week back I thought to go back to stock oreo and downloaded the Official Firmware lastest version for my G5s Plus, I flashed it using fastboot commands and now the only issue is that I do not have any IMEI in my phone, No network and No Signal.
Only thing I am getting is my Carrier Name Jio4G also it is able to detect my phone number. IMEI is correctly being shown using this command "$ fastboot getvar imei" but my device is unable to detect it. I have tried several time flashing with fastboot commands and Lenovo Moto Software Assistant, nothing worked for me.
I have also tried to resintall Pixel Experience ROM but no IMEI(Imei 0). I have also tried several other roms like RR and AOSP Ex also Havoc OS, nothing worked for me. I have also tried to flash TWRP backup of my Stock ROM but still IMEI 0. For your information I have also tried Pixel Experience rom with erasing modemst1 and modemst2 method, nothing worked.
Finally I thought to take it to the Moto Service Center, they flashed my devices with their software, but no success of retrieving the IMEI, even worse they gave me one more issue, which is now I am unable to unlock the bootloader with my unlock key. When I try to unlock it it says, "Code validation failure with status 7". When I try to generate new unlock data it says "Unlock data unavailable (bootloader) Failed.
I am really worried for my device because this is my only device and I am a student , I can not afford a new phone right now.
I will really appreciate your help for my entire lifetime, this issue is really making me sick.
I am attaching my "fastboot getvar all" output-
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C2.07
(bootloader) product: sanders
(bootloader) board: sanders
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY322F8CL2
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: E320A71E00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: "I AM HIDDING THIS FOR SECURITY PURPOSE, BUT IMEI IS VISIBLE HERE"
(bootloader) meid:
(bootloader) date: 12-11-2017
(bootloader) sku: XT1804
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jan 17 9:41:58 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/sanders_n/sanders_n:8.1.0
(bootloader) ro.build.fingerprint[1]: /OPS28.65-36-14/63857:user/release
(bootloader) ro.build.fingerprint[2]: -keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.271.12.sanders.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gfde333e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Aug 13 15:23:08 CDT 2019
(bootloader) sbl1.git: git=MBM-NG-VC2.07-0-gb564bed
(bootloader) rpm.git: git=5578f74
(bootloader) tz.git: git=82f94af-dirty
(bootloader) devcfg.git: git=82f94af-dirty
(bootloader) keymaster.git: git=82f94af-dirty
(bootloader) cmnlib.git: git=82f94af-dirty
(bootloader) cmnlib64.git: git=82f94af-dirty
(bootloader) prov.git: git=82f94af-dirty
(bootloader) aboot.git: git=MBM-NG-VC2.07-0-g37f20e1
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
all: listed above
Finished. Total time: 0.024s
Click to expand...
Click to collapse
You just mess your device with locked bootloader, there are not many things that can be done with locked bootloader. But still you can try this method.
https://forum.xda-developers.com/g5...solve-imei0-explanation-t3825147/post77249207
And try to unlock the bootloader, with unlock bootloader there could be some hope of recovery.
riyan65 said:
You just mess your device with locked bootloader, there are not many things that can be done with locked bootloader. But still you can try this method.
https://forum.xda-developers.com/g5...solve-imei0-explanation-t3825147/post77249207
And try to unlock the bootloader, with unlock bootloader there could be some hope of recovery.
Click to expand...
Click to collapse
Yes, I knwo there is an hope if i can unlock the bootloader, but the service center guy messed my device, I do not know how they flashed my device, they were flashing my device and said it is not turning on, i said okay return my device, i will flash it my self and after taking from them, i was trying to unlock the bootloader and I was getting the error "Code validation failure with status 7". I am also unable to get Unlock data.
What can i do now, is there any solution to it. Do i need to take my device to service center again ???
Try flashing april stock....then do the OTA update till August..
vivek1310yadav said:
Try flashing april stock....then do the OTA update till August..
Click to expand...
Click to collapse
Did it already and it have not solved my problem, There is one more issue on my phone, Whenever I flash my device with Retail and Retin verion it always shows my Harddware version as /x/x/x/x instead of PVT.
Go to settings>abount phone>hardware information then look at the version , in my case it is /x/x/x/x, because of which some of my sensors are not working.
My device is really messed up.
hamhaingaurav said:
Did it already and it have not solved my problem, There is one more issue on my phone, Whenever I flash my device with Retail and Retin verion it always shows my Harddware version as /x/x/x/x instead of PVT.
Go to settings>abount phone>hardware information then look at the version , in my case it is /x/x/x/x, because of which some of my sensors are not working.
My device is really messed up.
Click to expand...
Click to collapse
PM me..