hello everyone !! ) - need hepl to fix bug in the one mini 2 (kernel or sensor driver) problem with proximity sensor(capella CM3629): when phone in the poket (jeans , shorts, ow) and i have incoming call on the mini 2 play ringtone just one bottom speaker (tested many times - hardvareDisabler.apk help to off sensor (proximity) but sometimes phone is reboot .... so i writed to buil.prop = gsm.proximity.enable=false -too not helped)
- have any idea)?
tnx a lot
Dillik said:
hello everyone !! ) - need hepl to fix bug in the one mini 2 (kernel or sensor driver) problem with proximity sensor(capella CM3629): when phone in the poket (jeans , shorts, ow) and i have incoming call on the mini 2 play ringtone just one bottom speaker (tested many times - hardvareDisabler.apk help to off sensor (proximity) but sometimes phone is reboot .... so i writed to buil.prop = gsm.proximity.enable=false -too not helped)
- have any idea)?
tnx a lot
Click to expand...
Click to collapse
It's a 'feature'. HTC built them this way. I thing it's something specific to stock rom.
doiutzu said:
It's a 'feature'. HTC built them this way. I thing it's something specific to stock rom.
Click to expand...
Click to collapse
on htc desire 600 dual sim profile "in poket" work fine.
Related
Hello i found out my N1 Proximity sensor have issue wen a install 2.3.3 my screen shutoff when i do call and stuck blank screen i have to remove the battery and put the back.
i download Elixir App and doing some test and Sensor only Say "NEAR" I put my hand on the screen still say Near...
/etc/permissions
android.hardware.sensor.proximity.xml
android.hardware.sensor.light.xml
/system/lib
libssensorservice.so
Factory Code Nexus One
#*#0588#*#* Proximity sensor test (no work in my N1)
can i restart the sensor?
can i disable Proximity in DIAL ?
do i need to take tHTC Support N1?
where is the CM3602 on N1?
can i fix my self?
and I have the same problem but no answer :-(
___
http://forum.xda-developers.com/showthread.php?t=707234&highlight=nexus+proximity
Hi,
Have the same issue, too !
hmm, looks like a android 2.3 issue on that one....
The same here. Is there any way to do a downgrade to 2.2? The phone is unusable, I'll have to go back to my old Nokia!!
Also, at the same time, when I plug the earphones on the Nexus, it doesn't detect them and continues playing through internal speaker!! And I suspect that the light sensor doesn't work.
Hasta luego.
Nexus one proximity sensor problem
Hi guys i had the same problem with my phone
and I manage to fix it
I open the phone and check where the proximity sensor was
and clean it with the a spray duster they sell in computer store
I clean the entire phone
put i back together and it was fix
thanks me if it works for you like that
You are lucky,, just opened my phone and cleaned the proximity sensor and light sensor with specialized electronics solutions i borrowed from work and nothing happened,,dont know what to do about it
RE: how to disable proximity sensor
hey there, this is my second post, THIS PLACE IS AWESOME!!! I was able to disable my nexus one proximity sensor using the hex edit method (after granting the app root access) and now a brick to be is no more. thank you to the poster who made the original post and the one who mentioned the way to give hexedit root access. my sensor definition was exactly where he said it would be. the name of course was cm3602 (lowercase, looking for uppercase found nothing) I was able to change hex position 0000323d from 32 to 00 , and poof, no more black screen after dialing or when receiving a call. a temporary solution I was using was to use a bluetooth headset.
Thank you all.
Maybe this thread has been already mentioned on this forum. Have u ever had problems with making and receiving phone calls on your samsung galaxy s ? Maybe like screen turns black and freezes?
I've heard it's due to the proximity sensor, is that true? or could it be a hardware problem.
I've been looking solutions for this problem all over the internet but could not find any good ones.
I hope some of you have already solved this problem.
Please tell us how you did it,
Thanks in advance !!:good:
Problem Solved
Oh I finally found the solution on play store. You need to download Hardware Disabler and disable the gp2a drivers. Until now it works fine, i can make and receive phone calls. (It's possible when disabling gp2a drivers , your CPU performance can slow down)
Another option would be just to install your SGS 1 with the latest MIUI rom and enter in Call settings >> answer settings>> incoming call status settings and disable proximity sensor directly. This will not have any effect on your CPU performance.
I hope this well help some other users with the same problem :highfive:
Hello,
I bought on eBay (good seller) Touch screen to change one of my tablet.
I changed it without problem.
But now, after one day of use, I found bugs on touch it.
I have black areas (over detection) that moves randomly on the screen and restart it after re-working some time and hop it starts again in another area !!
(view a screenshot)
Do you think this is a quality of the new touch glass?
Or a software bug?
shaman_Turtle said:
Hello,
I bought on eBay (good seller) Touch screen to change one of my tablet.
I changed it without problem.
But now, after one day of use, I found bugs on touch it.
I have black areas (over detection) that moves randomly on the screen and restart it after re-working some time and hop it starts again in another area !!
(view a screenshot)
Do you think this is a quality of the new touch glass?
Or a software bug?
Click to expand...
Click to collapse
I'd guess that you haven't quite fitted it back together perfectly or the firmware got changed for the touchscreen by Asus for later revisions (or earlier) and you need to do a firmware touchscreen update.
Are you using a custom rom?
Hello,
I have a Stock Rom with last Update.
shaman_Turtle said:
Hello,
I have a Stock Rom with last Update.
Click to expand...
Click to collapse
So that should have applied the latest firmware. Hmmm
Go to settings, about, Hardware Information, Touch Panel version.
Mine is Raydium-0004-0000
What is yours?
Good question !!
I have make a 2 screenshot :
06 mai 2015 at 22:33
GPS V7.4.15 WIFI V7.1.50 Bluetooth V 11.0.27 Ecran tactile Raydium-0003-0008 Controleur PAD-AC32T-0309
and 07 mai 2015 at 09:08
GPS V8.1.16 WIFI V 8.0.46 Bluetooth V 12.0.44 Ecran tactile Raydium-0004-0000 Controleur PAD-AC32T-0311
Hello
My old touchscreen is ref : 5449N FPC-1
and my seller send a Compatible touchscreen but your ref is 5235N-FPC1.
I do not know what to do anymore?
Someone else he changed his touchscreen ???
Hi
( 1 )
I really need a custom ROM which fixed proximity sensor calling Black Screen Of Death , but when I connect a HF speakers the screen shows
I tried different ROMs ( stock, pure_nexus, Cataclysm ) without luck :crying:
( 2)
Also in whatsapp when I play audio messages it goes to black screen with only status bar and navigation showing and the sound volume so low. I have seen this bug only on Nexus 6. I's think it also related to the proximity sensor.
Note: I replaced the full LCD because I bought it with a broken LCD.
Nexus6 64gb
Cataclysm M 6.0.1
Pure Nexus M 6.0.1
Thanks
Still waiting for any tips
Nobody can help?
there's no such ROM, sorry.
Only issue I've ever had like this was with a zagg tgsp. It covered the process sensor... Had a vzw tg and now intelliglass. Both have the sensor cutout and haven't had an issue since.
Reading your post i remember having a similar proximity sensor problem with my Note 2 years ago. This post solved the problem for me.
Old and wit different hardware and software, but maybe just maybe it could be of some help for you:
http://forum.xda-developers.com/showthread.php?t=2353972
Nirak said:
Reading your post i remember having a similar proximity sensor problem with my Note 2 years ago. This post solved the problem for me.
Old and wit different hardware and software, but maybe just maybe it could be of some help for you:
http://forum.xda-developers.com/showthread.php?t=2353972
Click to expand...
Click to collapse
Thanks man
I will give it a go and see.
Thanks all for replying
The only thing that worked, I installed [ROM] ✵ N6XShamuM ✵ MMB29S ✵ Xposed & GravityBox ✵ v2.1.6
and disabled the proximity sensor within Xposed
horrrrray
Hi All,
My proximity sensor isn't triggering during calls (Possilbly at all?) causing me to accidentally put people on hold.
(very annoying! at least make a tone so I know I hit the button)
Is there a switch for that?
What's weird is that I don't see a HW test for the proximity sensor in the diagnostics screen (tapping on kernel version)
Edit -> settings -> system apps -> phone -> incoming call settings -> proximity sensor is ON.
Can someone whose proximity sensor is working download a sensors test app like https://play.google.com/store/apps/details?id=com.wered.sensorsmultitool&hl=en
and tell me if that detects your proximity sensor distance correctly? (or whatever app you want, just tell me which one).
- Frank
Go to Settings - About phone and tap 5 times on Kernel tab. You will get into test menu. There you can to test and calibrate proximity sensor.
sergmarin said:
Go to Settings - About phone and tap 5 times on Kernel tab. You will get into test menu. There you can to test and calibrate proximity sensor.
Click to expand...
Click to collapse
I don't see it. What is the test called?
What Rom are you running? I'm on 8.0.10.0
See pictures below. Test menu works on any firmware.
sergmarin said:
See pictures below. Test menu works on any firmware.
Click to expand...
Click to collapse
Well,that's damned odd.
My proximity sensor item is missing.
https://drive.google.com/open?id=0B6qmkujf4DlWVVFWVXBxTkJoRTA
xx
ChodTheWacko said:
Well,that's damned odd.
My proximity sensor item is missing.
https://drive.google.com/open?id=0B6qmkujf4DlWVVFWVXBxTkJoRTA
Click to expand...
Click to collapse
Just looked at mine and I have prox sensor as number 9. Sounds like you may need to flash an updated build.
I updated to developer rom and proximity appeared and was working.
I then re-updated to stable rom (8.0.12.0 i.e latest) and it dissapeared again!
ChodTheWacko said:
I updated to developer rom and proximity appeared and was working.
I then re-updated to stable rom (8.0.12.0 i.e latest) and it dissapeared again!
Click to expand...
Click to collapse
You already have the answer you're looking for. Guess the sensor is broken in the stable build. In this case, you may have to wait for the next stable release or use an alternate ROM.
ChodTheWacko said:
I updated to developer rom and proximity appeared and was working.
I then re-updated to stable rom (8.0.12.0 i.e latest) and it dissapeared again!
Click to expand...
Click to collapse
Confirm proximity sensor missing in 8.0.12.0
Unfortunately, it is also missing in 8.2.1.0 stable
On Chinese 8.2.3.0 and the settings are missing from the CIT list also ... with that said I don't depend on it anyways lol. Just checking things.
for some thick case the proximity sensors might have problem... need to reboot phone with case on to "register" the case thickness...
hi mi mix fans , I came through lot of applications,proximity sensor tests, procedures, secret codes etc . to get solution for "screen off during call and not on automatically" but i found the real solution in this is .. remove back cover which almost users use . , tpu transparent also and see whether it work during call ..yes,finally got solution. check yourself all test works properly and screen on during call when device is away from ear..if not ?? pls consider to clean sensor ..
Wanted to test it. I can see the test, but not sure how to test it. I still don't.
So I tried to the front microphone test to learn how to use these tests...
But it scared the s**! out of me. It's such a haunting noise! Is that normal?!
I'm on global stable, CIT proximity option doesn't show too. I think my sensor is bugged by my cover since when the device isn't covered the sensor works fine.
jaekry said:
Wanted to test it. I can see the test, but not sure how to test it. I still don't.
So I tried to the front microphone test to learn how to use these tests...
But it scared the s**! out of me. It's such a haunting noise! Is that normal?!
Click to expand...
Click to collapse
Yes, such an annoying noise.
i have same problem i just updated phone after proximity sensor not work why xiaomi not try before update this f*cking fw.
What I observed is after resetting when I tested it I came to know that sensors sensi
What I observed is after resetting when I tested it I came to know that sensors sensitivity distance increase up to an inch but starts dropping again as I move object in front of sensor 8 to 10 times and is reduce to 1 cm finally which is very less if you hold mobile in left hand ear but it works on right hand ear as proximity sensor is placed left of mobiles front side.I think it is a software problem which xiaomi should look in to.Sensor keeps on calibrating till it reduces distance to 1cm from nearly 1 inch that is 3 cms.This is very shameful for xiaomi that after so many years of experience they have not yet resolved this for Mi A1.
My proximity sensor also isn't working. I've tried to do this test we find on kernel tab, but I couldn't test it, it shows no options for me to calibrate or sth. Help me please!!
Same issue here. Phone just turns black, when I am calling people - difficulties to restart the display afterwards. Using Lineageos 16 - no chance to tab the kernel there. Dialing * # * # 64663 # * # * shows no results. Wandering, if this is a hardware or a software issue.