Hello!
Yesterday, I tried rooting my Memopad ME172V, using ASUS Intel Rootkit... and I BRICKED it! (T_T ) I have read "All in 1 App" thread of crazykiddo and it seems that there aren't any solutions for this yet but to send it to the service center (BTW, i lost my receipt and warranty card).
I have read in the post of nerotNS (link below), that I can try to flash system dump but I can't find any instructions on how to do it.
(http://forum.xda-developers.com/showthread.php?t=2171492&page=2)
I have also googled about how to solve this problem but I can't find any solutions on this.
Are there any solutions on this error as of the moment? Please help me. Thank You.
any updates on this?
Flashing
You can flash your stock system via the dump utility , from here
http://forum.xda-developers.com/showpost.php?p=42047570&postcount=263
But first you need to download the stock firmware , download the "DUMP_20130724_STOCK.zip" ( and its split parts) from :
https://www.mediafire.com/folder/23ycdy8i4f8mu/ASUS-me172v
Extract them , and then you will see the stock files. After that follow the instruction on how to restore via the dump utility (from the 1st link).
Hope you got it.
P.S. If you don't get the dump utility from the first link , then you can find it in the Mediafire Link (DUMP.zip).
Related
Hello!
I bought my Huawei u9000 for about 3 weeks ago and ive been trying every method i could find on this forum.
All methods (including SUT L3) has given the error : The software image does not match with your phones software. Or something similar. Ive tried every Official stock rom on this site: mediafire.com/FB400#28k8c4dsvarzx,1 (cannot post full link becouse i dont have enough posts)
Help would be appreciated.
Thanks in advance
hk0n said:
Hello!
I bought my Huawei u9000 for about 3 weeks ago and ive been trying every method i could find on this forum.
All methods (including SUT L3) has given the error : The software image does not match with your phones software. Or something similar. Ive tried every Official stock rom on this site: mediafire.com/FB400#28k8c4dsvarzx,1 (cannot post full link becouse i dont have enough posts)
Help would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
hi
assuming urs is the same as my phone
go here : http://forum.xda-developers.com/showthread.php?t=1274063
download the rom extract it on ur PC and rename it to firmaware.nb0
place it on the root of ur SD card and flash it via stock recovery
Problem Occurred: Because of uninstalling or tweaking certain settings and apps, the second reboot will never success (soft brick bootloop)
What is needed for recovery : A stock firmware for EKGC100 (Malaysia), GC100XXBMC4 (XME)
Why don't you download by yourself? Because I've searched everywhere but only one place had the file, that's Rapidator. I've excess the limit of downloading the file from rapidgator. Download fail.
Why Post this?
PLEASE, I please everyone, please share the firmware for me. I need this stock firmware for unbricking my camera... :crying::crying::crying:
It's in the general help
Check adam outler threads... I always saved by his files everytime bricked
Stock firmwares are HERE
Hello All,
I have Note 5 (Australia Optus, SM-N920I). I have never rooted my phone. Today I tried Odin to flash (India, SM-N920G) "Marshmallow" files to it but got an error failed error (Please see attachment) . Now my phone is bricked and I really appreciate if someone can help me out.
I tried Samsung Smart Switch but i don't know my S/N. As note 5 doesn't has removable battery, I cant check its S/N from back. I have also tried pressing home button to get S/N. Please help me, what I am doing wrong. I tried searching a lot but no luck.
I have also attached my phone screenshot.
Thanks in advance.
Solved - Looks like I can not flash different variant. So i flashed original Optus files and got my phone back.
You didn't follow the instructions. There are 4 files that need to be flashed. There is a whole thread which has the download links and further instructions in the general thread. I'd suggest you go read up that thread.
abde27 said:
You didn't follow the instructions. There are 4 files that need to be flashed. There is a whole thread which has the download links and further instructions in the general thread. I'd suggest you go read up that thread.
Click to expand...
Click to collapse
Thanks for your reply mate.
Can you send me a link to that and also I have read somewhere that if you have only one file, that means its already consist of all other files inside.
In this case, you do need the 4 files. I am using a n920i with the n920g firmware. Here's a link to the post with the steps outlined: http://forum.xda-developers.com/showpost.php?p=66058243&postcount=197
Hi you all guys, I own a Kazam Tornado 348 and with little android knowledge decided to root it, which I managed.
After that I decided to keep playing and I did something wrong since I got the boot screen loop, the one where you are only able to enter the TWRP recovery mode but not the OS, I tried to restore it, wipe and reboot it multiple times without success. Now it seems I did even something worse because I am not able to enter recovery mode anymore and it seems will keep turning off and on (just enough to show the phone logo) until it runs out of battery
It is possible I deleted something else last time I was there, like deleting the TWRP itself? I am on total darkness here, I will appreciate if someone point me towards a possible solution, which I hope there is. Thanks for the help
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
help for my tornado 348
afaqktk2 said:
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
Click to expand...
Click to collapse
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
renox51 said:
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
Click to expand...
Click to collapse
Download official firmware of tornado 348 and see tutorial how to flash mediatek phones with sp flash tool.. Hope u'll get it
Same
This happened to me too, and not only I couldn't flash a newer Android version (5.1), my IMEI number got destroyed, and I have tried many things to fix it and restore it, but that didn't work.
Sorry to post here. I didn't have enough score to post at Devs section, so I'll post here. Please don't delete my post, or someone please copy all of this post and post it. Thanks so much !
I wanted to install AOSP 9 on my device - the Nokia 1 TA-1047 with MTK6735.
Well, after trying to unlock bootloader with md5, erase system, flash system, what I recieve from the fastboot is: sparse overflow. And I was very worry. Right after that, I use the SP Flash Tool, but again, I was worry because CHIP TYPE is NOT MATCH.
So how will you fix it? I'm gonna show you right now.
First, I found the nb0 file to flash by lucky. Here is the link :
http:// tinyurl .com/ frtnokia1
I think it will work with all model.
Second, use the NOST, it's the software that you'll use to flash.
(RECOMMEND: Don't use the OST LA, it'll not work. I tried a lot.)
Here is the download link (Download the latest release v5.0 at the assets)
https:/ /github .com/StollD/NOST/releases/tag/v0.5
After you install the software, extract the nb0 file from the zip, follow to the FLASH part.
Open the NOST at the desktop, choose Next, select the nb0 file you just extracted, choose the Normal Download and Erase User Data (just in case your files still in the phone, of course you'll LOSS ALL YOUR DATA. Because you don't follow the instruction that BACKUP ALL YOUR IMPORTANT DATA).
DO NOT CHOOSE THE EMERGENCY DOWNLOAD!
Before flash, please turn on your phone and let it at the logo screen.
What are you waiting for? Click Next and you're good to go!
Just in case some error appears, just unplug the USB, connect again and Flash it. I have an error when it rebooting the bootloader, but after reconnect the phone to the PC, I successfully flash my phone, and now it turned normal.
Last recommend: DON'T TRY TO FLASH THE SYSTEM OR ROOT THE DEVICE IF YOU DON'T WANT TO WASTE YOUR TIME.
That's all!
Did you manage to run any custom rom?
Hello i tried to download, but the link you provided seems a file on a sharepoint and i have no access
could you pleaase re-upload the file or share the source?
SORRY !
ramnus said:
Hello i tried to download, but the link you provided seems a file on a sharepoint and i have no access
could you pleaase re-upload the file or share the source?
Click to expand...
Click to collapse
Sorry ! It's a long time I don't access XDA so I can't read your question. Well, this is the file if you're still need : https :// androidfilehost. com/ ?fid= 11410963190603892716
nokia 1 ta-1079
man this work for nokia 1 TA-1079? PLS HELPP
---------- Post added at 10:54 PM ---------- Previous post was at 10:52 PM ----------
smileos said:
Sorry ! It's a long time I don't access XDA so I can't read your question. Well, this is the file if you're still need : https :// androidfilehost. com/ ?fid= 11410963190603892716
Click to expand...
Click to collapse
link is dead error 404 not found
Edit**
Link is working and the nb0 work for nokia 1 TA-1079 ty a lot !!!
i install android 9 in my nokia 1 with fastboot and twrp if u wanna know send me dm
YOU ARE WELCOME !
Since I lost my phone and completly moved to Xiaomi Mi A2 Lite, I can't do anything to the Nokia's things anymore. But I want to know how did you install Android 9 on that tiny phone. Here is my email : [email protected]