Database Develop

[Q] [HELP] ME172V "No USB cable connected!" error

Hello!
Yesterday, I tried rooting my Memopad ME172V, using ASUS Intel Rootkit... and I BRICKED it! (T_T ) I have read "All in 1 App" thread of crazykiddo and it seems that there aren't any solutions for this yet but to send it to the service center (BTW, i lost my receipt and warranty card).
I have read in the post of nerotNS (link below), that I can try to flash system dump but I can't find any instructions on how to do it.
(http://forum.xda-developers.com/showthread.php?t=2171492&page=2)
I have also googled about how to solve this problem but I can't find any solutions on this.
Are there any solutions on this error as of the moment? Please help me. Thank You.

any updates on this?

Flashing
You can flash your stock system via the dump utility , from here
http://forum.xda-developers.com/showpost.php?p=42047570&postcount=263
But first you need to download the stock firmware , download the "DUMP_20130724_STOCK.zip" ( and its split parts) from :
https://www.mediafire.com/folder/23ycdy8i4f8mu/ASUS-me172v
Extract them , and then you will see the stock files. After that follow the instruction on how to restore via the dump utility (from the 1st link).
Hope you got it.
P.S. If you don't get the dump utility from the first link , then you can find it in the Mediafire Link (DUMP.zip).

Did I break my phone?

Hi you all guys, I own a Kazam Tornado 348 and with little android knowledge decided to root it, which I managed.
After that I decided to keep playing and I did something wrong since I got the boot screen loop, the one where you are only able to enter the TWRP recovery mode but not the OS, I tried to restore it, wipe and reboot it multiple times without success. Now it seems I did even something worse because I am not able to enter recovery mode anymore and it seems will keep turning off and on (just enough to show the phone logo) until it runs out of battery
It is possible I deleted something else last time I was there, like deleting the TWRP itself? I am on total darkness here, I will appreciate if someone point me towards a possible solution, which I hope there is. Thanks for the help

Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...

help for my tornado 348
afaqktk2 said:
Simply flash it with sp flash tool with gionee elife s5.1 firmware which is Android 5.1 or with kazam official firmware 4.4.2... It will boot up..
My answer is not for u becaus its too late but for those who came here to the thread having same problem...
Click to expand...
Click to collapse
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio

renox51 said:
Hi, I have a similar problem but I am not an expert... so I need very easy and step by step instructions...
Could you please snd detailed information about the procedure to flash my Tornado 348 (including links or pgms to execute) ?.
Please note that the major problem is when i connect it to internet: in this case I cannot use the smartphone because it starts to open and close apps and downloads an infinite number of apps...until the memory is full and it stops.
So the best solution should be to keep it disconnected from internet (no wifi) and access it from a PC.
For this reason I kindly ask you if you could help me with sending the right sw tool to flash it from my PC connected to my Kazam.
Just in case I leave you my mail : [email protected].
Really hope you can help me. I paid my Tornado 348 € 300,00 and I have NO ASSISTANCE by Kazam... (they say they supended the assistance in Italy and I am waiting since months without any help)
Thanks a lot
Antonio
Click to expand...
Click to collapse
Download official firmware of tornado 348 and see tutorial how to flash mediatek phones with sp flash tool.. Hope u'll get it

Same
This happened to me too, and not only I couldn't flash a newer Android version (5.1), my IMEI number got destroyed, and I have tried many things to fix it and restore it, but that didn't work.

LG G4 LS991 Possible unbrick for 9008 Qualcomm

Hello everyone!
I have a bricked qhs dload 9008 LG G4 ls991 and I've been searching in the past five months a method to unbrick this phone via usb.
I found a post in a forum that it seem that they unbrick one of this phone, the only problem "the forum it's totally in russian". I use google translate and think I got the idea. I let you the link if someone has the same problem and want to try the solution
http://4pda.ru/forum/index.php?showtopic=676146&st=5400#entry54915015
I'll give a try with my phone

Joc1890 said:
Hello everyone!
I have a bricked qhs dload 9008 LG G4 ls991 and I've been searching in the past five months a method to unbrick this phone via usb.
I found a post in a forum that it seem that they unbrick one of this phone, the only problem "the forum it's totally in russian". I use google translate and think I got the idea. I let you the link if someone has the same problem and want to try the solution
http://4pda.ru/forum/index.php?showtopic=676146&st=5400#entry54915015
I'll give a try with my phone
Click to expand...
Click to collapse
did this work
i was under the understanding to this day that a octoplus box with jtag was the only way to fix this device
i havnt had a g4 in a few months so things may have changed but last i heard that was the only way

Hi and a very pleasant day. I know this thread may be dated but it's still relevant due to the fact that a lot of users like my self is still facing this problem in 2018. I have an LG G4 LS991 that I have mistakenly downgraded *not knowing the file flashed would be lower version* anyways, I was able to read full flash and have the firmware extracted and saved. The firmware version is "ZVI" which is the latest.
Moreover, I have read in forums where you can do a direct emmc boot repair via sd card. Only thing you wil need is the systemImage.bin file. If you know how to get this or can provide me with some information on how I can etract it for use, then I would happily oblige. email me [email protected]

icoolie said:
Hi and a very pleasant day. I know this thread may be dated but it's still relevant due to the fact that a lot of users like my self is still facing this problem in 2018. I have an LG G4 LS991 that I have mistakenly downgraded *not knowing the file flashed would be lower version* anyways, I was able to read full flash and have the firmware extracted and saved. The firmware version is "ZVI" which is the latest.
Moreover, I have read in forums where you can do a direct emmc boot repair via sd card. Only thing you wil need is the systemImage.bin file. If you know how to get this or can provide me with some information on how I can etract it for use, then I would happily oblige. email me [email protected]
Click to expand...
Click to collapse
Check below link if anything helps...
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629

icoolie said:
Hi and a very pleasant day. I know this thread may be dated but it's still relevant due to the fact that a lot of users like my self is still facing this problem in 2018. I have an LG G4 LS991 that I have mistakenly downgraded *not knowing the file flashed would be lower version* anyways, I was able to read full flash and have the firmware extracted and saved. The firmware version is "ZVI" which is the latest.
Moreover, I have read in forums where you can do a direct emmc boot repair via sd card. Only thing you wil need is the systemImage.bin file. If you know how to get this or can provide me with some information on how I can etract it for use, then I would happily oblige. email me [email protected]
Click to expand...
Click to collapse
http://bit.do/unbrick9008
Sent from my LG-H815 using XDA Labs

Wiped with Locked Bootloader :/

Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...

Mangono said:
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Click to expand...
Click to collapse
I guess you and I are stuck with the same problem.

jonezie said:
I guess you and I are stuck with the same problem.
Click to expand...
Click to collapse
I solved The Problem if you need help say it

Mangono said:
I solved The Problem if you need help say it
Click to expand...
Click to collapse
Please help me out

Guide
jonezie said:
Please help me out
Click to expand...
Click to collapse
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me

Mangono said:
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Click to expand...
Click to collapse
Thanks so much for your help. I'll follow these steps as you've stated and see how it goes. By the way, I'm on single-sim Eva-L09C432B378. I'll try use the DC Phoenix 35 but it will cost me money as you've said. May I please use your leftover credits at your account?
Thanks in advance

jonezie said:
Please help me out
Click to expand...
Click to collapse
No Problem Please write me a Personal Message i dont Post My Account in this Public Thread

Need help for Huawei P30 Pro, your device has loaded a different operating system

So my friend got the Huawei P30 Pro three days ago and everything was working fine until one morning it was stuck in a bootloop, it basically powers the phone then the messege " your device has loaded a different operating system " pops up and some other link below the text, then after that it goes to the Huawei eRecovery tab where it has the option to factory reset, update the emui and power off but, we tried updating the emui and a messege appears that " getting package info failed ", also if you try to power off the phone it just goes back to the first messege " your device has loaded a different operating system " . Factory reset doesn't work too. Anyone experienced the same problem or has a solution to it? I'm totally new to installing software to mobile phones so i would like a whole explanation if someone has the time. Thanks in advance.

Kakoda said:
So my friend got the Huawei P30 Pro three days ago and everything was working fine until one morning it was stuck in a bootloop, it basically powers the phone then the messege " your device has loaded a different operating system " pops up and some other link below the text, then after that it goes to the Huawei eRecovery tab where it has the option to factory reset, update the emui and power off but, we tried updating the emui and a messege appears that " getting package info failed ", also if you try to power off the phone it just goes back to the first messege " your device has loaded a different operating system " . Factory reset doesn't work too. Anyone experienced the same problem or has a solution to it? I'm totally new to installing software to mobile phones so i would like a whole explanation if someone has the time. Thanks in advance.
Click to expand...
Click to collapse
You're the same guy from reddit who was told your friend flashed the wrong version of EMUI 10
Read this thread carefully
https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639

Your problem got solved?
Kakoda said:
So my friend got the Huawei P30 Pro three days ago and everything was working fine until one morning it was stuck in a bootloop, it basically powers the phone then the messege " your device has loaded a different operating system " pops up and some other link below the text, then after that it goes to the Huawei eRecovery tab where it has the option to factory reset, update the emui and power off but, we tried updating the emui and a messege appears that " getting package info failed ", also if you try to power off the phone it just goes back to the first messege " your device has loaded a different operating system " . Factory reset doesn't work too. Anyone experienced the same problem or has a solution to it? I'm totally new to installing software to mobile phones so i would like a whole explanation if someone has the time. Thanks in advance.
Click to expand...
Click to collapse
Hey did your problem got solved ?
Would be great if you could leave me some information too, due I'm facing a similar problem
It would be great if you could leave some information
Cheers

Binban88 said:
Hey did your problem got solved ?
Would be great if you could leave me some information too, due I'm facing a similar problem
It would be great if you could leave some information
Cheers
Click to expand...
Click to collapse
Hi m8,
What's your actual build number and cust? For how to find out in case you don't know for sure, check my post - https://forum.xda-developers.com/showpost.php?p=81887785&postcount=418
Sent from my VOG-L29 using Tapatalk

SilviuO said:
Hi m8,
What's your actual build number and cust? For how to find out in case you don't know for sure, check my post - https://forum.xda-developers.com/showpost.php?p=81887785&postcount=418
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
Hi There,
I have the same problem. I did flash it with a wrong version. I ran that command here is my build number:
PCT-L29 9.0.1.169(C636E1R2P1)
I cannot find anyway to fix this.
Update: Thank you for the reply. That is the first problem that there is no free version. The second one is that these files are full-base version not the sd-base version. How can I convert the full-base version to the sd one?

Matt_honor said:
Hi There,
I have the same problem. I did flash it with a wrong version. I ran that command here is my build number:
PCT-L29 9.0.1.169(C636E1R2P1)
I cannot find anyway to fix this.
Click to expand...
Click to collapse
Hi m8,
Did you flashed a wrong version cust of EMUI 10 on your Honor View 20 device?
Later edit - i've found the dload firmware for your device (EMUI 10) which is needed to be used to revive your device, but it's a paid one and i don't have an account in order to download it
PCT-L29D 10.0.0.179(C636E3R4P3)_Firmware_EMUI10.0.0_05015PVU
Sent from my HUAWEI VOG-L29 using XDA Labs

Thank you for the reply. Unfortunately , I flashed it with C434 and I was not aware of it that it can brick my phone. All the blogs I looked into, they were all mentioning the PCT-L29 not the specific version.
That is the first problem that there is no free version. Is there any other website that I can request to download this version?
The second one is that these files are full-base version not the sd-base version. How can I convert the full-base version into the sd one?
Another question that my version is C636E1R2P1 and the one you provided is C636E3R4P3. They have different regions of E1R2P1 and E3R4P3. Does that create any issue?

Matt_honor1 said:
Thank you for the reply. Unfortunately , I flashed it with C434 and I was not aware of it that it can brick my phone. All the blogs I looked into, they were all mentioning the PCT-L29 not the specific version.
That is the first problem that there is no free version. Is there any other website that I can request to download this version?
The second one is that these files are full-base version not the sd-base version. How can I convert the full-base version into the sd one?
Another question that my version is C636E1R2P1 and the one you provided is C636E3R4P3. They have different regions of E1R2P1 and E3R4P3. Does that create any issue?
Click to expand...
Click to collapse
No, the dload firmware for your device isn't free on other site
You can't convert those files. What you've got is the update zip files that are used by HiSuite when there is an update available for you. But you can't use HiSuite, because you would need your device to be working...
No issues, if you managed to get that firmware, you can use it
Sent from my HUAWEI VOG-L29 using XDA Labs