Database Develop

[Q] modelid is PN071*****?

Is that supposed to happen? Is it safe to assume that my mid is PN0710000 then? if not, how should I fix this?

Wait, where is written this MID?

in adb when trying to fastboot getvar all. It probably didn't help that it says getvar all failed, but I'm stuck here

Wait, if you will you the command:
Code:
fastboot getvar all
you musb be in fastboot usb.
If you're in android, you can boot in fastboot with the command:
Code:
adb reboot bootloader[/url] and now you can use the getvar.
p.s. Post it here deleting imei and serial number :)

I did it just like that, did it a couple more times just to make sure, and still got the same result. Anyways:
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 5.29.401.13
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxx
INFOimei: xxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN071****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4310mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.067s
Click to expand...
Click to collapse
please tell me this can be fixed...

Habel said:
I did it just like that, did it a couple more times just to make sure, and still got the same result.
Click to expand...
Click to collapse
Your version main start with 5, when the latest base starts with 3, and this is strange.
However, have you flashed some firmware in this period?
Probably there is a solution, but i don't know atm.

well, I just bought this phone yesterday (yay me), realized something was off when I couldn't OTA update (which is because of S-off), and now afraid to just flash the new 3.62 firmware because of the stars (asterisks?). could it be i did something wrong with the commands?

Try to flash a ruu for your phone

ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?

Habel said:
ok, I'll take a look at that. thanks for your help Guich
edit: what kind of RUU should I get? do i need to match it with the bootloader or something else, or any one of them works?
Click to expand...
Click to collapse
A ruu compatible with your cid
Because you're s-off and all ruu can be flashed fine!

hey Guich, I took your advice and tried to flash the RUU, but now i'm getting very confused. the flashing went fine, but I see no changes on my phone. In Settings>About>Software Information the software version is still 1.29.401.13, while getvar all shows me that the version is 3.62.401.1. Is there anything I'm misunderstanding here?
edit: do i need to unlock the bootloader for any of this?

I have same PN071**** I dont remember what was there before I have it from Ebay probly some Chinesse version but the cover say that it is PN714000, I accidently changed S-OFF to S On and flashed another rom.I cant do S-OFF anymore tried many things. Riffbox doesnt work with 714000 unfortunately.

[Solve] Searching for the correct RUU

Hi everyone,
I unlocked my HTC One, S-OFF, Root and installed TWRP.
Now I'm searching for the correct RUU.
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.21.3263.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.63.163.1
INFOversion-misc: PVT SHIP S-OFF
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__203
INFObattery-status: good
INFObattery-voltage: 4281mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-fd1bd949
INFOhbootpreupdate: 11
INFOgencheckpt: 0
I tried this one but it didn't worked
ruu_m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-exe
Thanks for your help !

PParixx said:
Hi everyone,
I unlocked my HTC One, S-OFF, Root and installed TWRP.
Now I'm searching for the correct RUU.
INFOversion-bootloader: 1.55.0000
INFOversion-main: 3.63.163.1
INFOversion-misc: PVT SHIP S-OFF
INFOproduct: m7_ul
INFOmodelid: PN0710000
INFOcidnum: HTC__203
I tried this one but it didn't worked
ruu_m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-exe
Thanks for your help !
Click to expand...
Click to collapse
1- Something is a bit confusing, you have a .163. firmware (3.63.163.1), but with a .401. CID (HTC__203).
2- the reason the ruu didnt work, is because of hboot 1.55, you need to downgrade hboot to 1.44 first, then the ruu should work; no need to relock since you are s-off; check my guide in my signature on how to downgrade hboot first (it's in the first post)
KEEP S-OFF

Ok I did it !
But now I want to lock the boot loader and go to S-ON but my phone isn't recognize in fast boot...

PParixx said:
Ok I did it !
But now I want to lock the boot loader and go to S-ON but my phone isn't recognize in fast boot...
Click to expand...
Click to collapse
Are you SURE you want to go S-On? I really do not recommend it.
If you do then please follow my guide to the letter.... if you have a questions, then please ask!!
As for fastboot not recognizing phone, best to use a Win7 (or XP or even Ubuntu Live USB) machine; lots of problems with Win8 and especially 8.1

Ok so should I let the bootloader unlocked AND the S-OFF ?
Will it be a problem for the next updates ?

PParixx said:
Ok so should I let the bootloader unlocked AND the S-OFF ?
Will it be a problem for the next updates ?
Click to expand...
Click to collapse
you can set it locked, but it's really not necessary, all the OTAs will work fine even with unlocked bootloader. If you want to set it locked, that's OK too.
However, consider S-Off your "get out of jail" card, if something should ever go wrong, the only thing can save you is S-Off. That's why the S-Off is important, locked or unlocked is minor.

Ok so I will stay this way.
And my phone isn't recognize anymore (I don't know why cause it worked before) in fastboot with my W8.1 so it's fine.
Thanks for your help !

PParixx said:
Ok so I will stay this way.
And my phone isn't recognize anymore (I don't know why cause it worked before) in fastboot with my W8.1 so it's fine.
Thanks for your help !
Click to expand...
Click to collapse
Win8.1 has issues
but once you take the OTA updates to 3.62 it should work again, i remember reading that 8.1 seems not to work older hboots.
feel free to press the thanks button if l i helped , and if all is good, please edit the main thread title to include [SOLVED]

nkk71 said:
Win8.1 has issues
but once you take the OTA updates to 3.62 it should work again, i remember reading that 8.1 seems not to work older hboots.
feel free to press the thanks button if l i helped , and if all is good, please edit the main thread title to include [SOLVED]
Click to expand...
Click to collapse
Yes even a RUU that changes the hboot below 1.55 will fail on windows 8.1, the pc will loose connectivity the instant the hboot is downgraded. It then requires another pc to fix it. Or a boot cd as you mentioned.
I run windows 8.1 but i keep a windows 7 box close by just for this reason ( it also comes in handy for other things like Odin - ACMEInstaller - Jungleflasher - Etc )

clsA said:
Yes even a RUU that changes the hboot below 1.55 will fail on windows 8.1, the pc will loose connectivity the instant the hboot is downgraded. It then requires another pc to fix it. Or a boot cd as you mentioned
Click to expand...
Click to collapse
oh good to know, thanks. didn't think of that one, a RUU getting stuck in the middle would not be nice.
Luckily I dont need it at the moment, but I think I'll look into creating an Ubuntu USB over the weekend, seems to be working better with fastboot, rumrunner, etc.

[Q] S-OFF Help Needed

So, before you tell me to go read other forums, I have. I have read ALOT. So, before I begin, I will start off by telling you my phone's information.
Android Version: 4.2.2
Sense: 5.0
Software: 2.24.401.1
HBOOT: 1.55
I am rooted, and I am unlocked.
I have attempted to use RumRunner with no success. I have gotton to about where it gets past rebooting to bootloader then back to home then it says "needs more fermenting" or something then it does like
[*************************]
and after that it does
[TTTT*******************]
then closes.
I have also used firewater, it sometimes chugs 6 bottles, and recently it has been chugging one, then just exiting.
I have been trying to s-off my phone sense i herd about 4.4 release. I have had my phone for a little over 3 months still with no success...If any help can be assisted, it would be greatly appreciated.

If anyone could help, it would be great. Lol

9595jakob said:
So, before you tell me to go read other forums, I have. I have read ALOT. So, before I begin, I will start off by telling you my phone's information.
Android Version: 4.2.2
Sense: 5.0
Software: 2.24.401.1
HBOOT: 1.55
I am rooted, and I am unlocked.
I have attempted to use RumRunner with no success. I have gotton to about where it gets past rebooting to bootloader then back to home then it says "needs more fermenting" or something then it does like
[*************************]
and after that it does
[TTTT*******************]
then closes.
I have also used firewater, it sometimes chugs 6 bottles, and recently it has been chugging one, then just exiting.
I have been trying to s-off my phone sense i herd about 4.4 release. I have had my phone for a little over 3 months still with no success...If any help can be assisted, it would be greatly appreciated.
Click to expand...
Click to collapse
flash an unsecured kernel and retry rumrunner
or
flash arhd 31.6 sense rom and retry rumrunner. (arhd because its rooted and already have an unsecured kernel)
http://android-revolution-hd.blogspot.ca/p/android-revolution-hd-mirror-site-var.html

Will give it a try after work. If no success, I'll post a reply.

OHHHH, Android Revolution, I have already attempted to use that Rom. I have tried that, carbon, and a stock.

9595jakob said:
OHHHH, Android Revolution, I have already attempted to use that Rom. I have tried that, carbon, and a stock.
Click to expand...
Click to collapse
which version of arhd did you tried? Use the version that match your firmware version and it should be fine.

3.0 I believe. The latest possible version of Android Revolution for non s-off HTC one. It was android 4.3

I have also tried it on Carbon, and a stock Rom.

alray said:
which version of arhd did you tried? Use the version that match your firmware version and it should be fine.
Click to expand...
Click to collapse
So just let me know. Thanks.

Any help would be niccccce....lol

9595jakob said:
Any help would be niccccce....lol
Click to expand...
Click to collapse
how about a "fastboot getvar all" excluding IMEI and s/n

nkk71 said:
how about a "fastboot getvar all" excluding IMEI and s/n
Click to expand...
Click to collapse
Wait...you want me to do what? Lol

9595jakob said:
Wait...you want me to do what? Lol
Click to expand...
Click to collapse
just want you to post a fastboot getvar all (excluding IMEI)
if you're not sure what that means, then you should do a little bit of research about fastboot and adb commands, etc.
I mean no disrespect whatsoever, but if you want to go S-Off, then you should know what these commands mean, and can / cannot do, before you end up with a paperweight (a nice one, but a paperweight nonetheless)

nkk71 said:
just want you to post a fastboot getvar all (excluding IMEI)
if you're not sure what that means, then you should do a little bit of research about fastboot and adb commands, etc.
I mean no disrespect whatsoever, but if you want to go S-Off, then you should know what these commands mean, and can / cannot do, before you end up with a paperweight (a nice one, but a paperweight nonetheless)
Click to expand...
Click to collapse
oh, lol wow. i was on my phone and i did a quick glance. ok. lemme boot into fastboot real quick and ill post it.
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.21.3263.03
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.24.531.3
INFOversion-misc: PVT SHIP S-ON
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0713000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 3751mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-412e361e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!

9595jakob said:
oh, lol wow. i was on my phone and i did a quick glance. ok. lemme boot into fastboot real quick and ill post it.
INFOversion-bootloader: 1.55.0000
INFOversion-main: 3.24.531.3
INFOversion-misc: PVT SHIP S-ON
INFOmodelid: PN0713000
INFOcidnum: T-MOB010
all: Done!
Click to expand...
Click to collapse
i think http://firewater-soff.com/ should work for you, on a rooted ROM with unsecured kernel

nkk71 said:
i think http://firewater-soff.com/ should work for you, on a rooted ROM with unsecured kernel
Click to expand...
Click to collapse
I have tried Firewater

Annnnnnnny help would be nice

HTC One software update

Hello, I have a problem with updating my HTC One, usually I would go to phone's settings, info, updates, it would scan for new software, download it, reboot, install and it's good to go. Recently I rooted my phone and installed TWRP, now when it downloads the update it reboots but enters TWRP recovery but what do I do from there? If I just reboot I still get the update prompt. Thanks for any help.

theleet said:
Hello, I have a problem with updating my HTC One, usually I would go to phone's settings, info, updates, it would scan for new software, download it, reboot, install and it's good to go. Recently I rooted my phone and installed TWRP, now when it downloads the update it reboots but enters TWRP recovery but what do I do from there? If I just reboot I still get the update prompt. Thanks for any help.
Click to expand...
Click to collapse
a little bit of searching, would have told you that you need to have stock recovery for OTAs to work.... (and obviously stock ROM)

Ok just a quick set of questions then so I don't brick my phone if you don't mind..
So to update I go like this:
- flash stock recovery with TWRP (recovery 4.19.401.9.img I found this?)
- go to settings etc and update as usual
- when updated flash TWRP again
- reroot my phone
I this ok? Will I lose any data doing it like this? My phone is just rooted, s-on.
Thanks.

theleet said:
Ok just a quick set of questions then so I don't brick my phone if you don't mind..
So to update I go like this:
- flash stock recovery with TWRP (recovery 4.19.401.9.img I found this?)
- go to settings etc and update as usual
- when updated flash TWRP again
- reroot my phone
I this ok? Will I lose any data doing it like this? My phone is just rooted, s-on.
Thanks.
Click to expand...
Click to collapse
i don't think 4.19.401.9 will match you current version, so start by posting a "fastboot getvar all" (excluding IMEI and s/n)
and the ROM is stock?

nkk71 said:
i don't think 4.19.401.9 will match you current version, so start by posting a "fastboot getvar all" (excluding IMEI and s/n)
and the ROM is stock?
Click to expand...
Click to collapse
Yes the ROM is 100% stock 4.19.401.8 just rooted.
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.23.3263.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 3823mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.043s
This is the info you requested. Should I look for 4.19.401.8 recovery?

theleet said:
Yes the ROM is 100% stock 4.19.401.8 just rooted.
INFOversion-bootloader: 1.56.0000
INFOversion-main: 4.19.401.8
INFOversion-misc: PVT SHIP S-ON
INFOproduct: m7_ul
INFOmodelid: PN0710000
INFOcidnum: HTC__032
This is the info you requested. Should I look for 4.19.401.8 recovery?
Click to expand...
Click to collapse
you're getting the update to .11 ?
anyway, yes, get stock recovery 4.19.401.8, available here: http://d-h.st/0Jy thanks to @Guich
flash that, and you should be good to install the OTA, you may loose root along the way, in which case you'll need to re-root after the OTA

nkk71 said:
you're getting the update to .11 ?
anyway, yes, get stock recovery 4.19.401.8, available here: http://d-h.st/0Jy thanks to @Guich
flash that, and you should be good to install the OTA, you may loose root along the way, in which case you'll need to re-root after the OTA
Click to expand...
Click to collapse
Yes, I get the update prompt all the time it's driving me insane so I think the best way to get rid of it is to simply update Thanks for all the help

Guru Reset to Stock, OTA doesn't work

Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.

acnak said:
Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.
Click to expand...
Click to collapse
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?

yatindroid said:
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?
Click to expand...
Click to collapse
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0

acnak said:
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that

yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
This was the only stock ROM for Vodafone AU I can find. I originally made a nandroid backup when I first rooted the phone but that has since been accidentally deleted. If you have a more recent version of the stock Vodafone AU ROM that would be much appreciated.

version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?

deeevan said:
version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?
Click to expand...
Click to collapse
Do you have Nandroid backup ?
I have Ubuntu so its easy to open and extract nandroid backup and compression
open nandroid backup extract system and data/preload folder
Take any reset rom replace its system and data folder to your backup folders
replace boot recovery radio files from same version (extract from OTA firmware)
edit aroma config details version etc with notepad++
now zip all files and its ready nothing much require
I think @Joeisgood99 have reset rom 6.xx.980.x version

Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.

deeevan said:
Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.
Click to expand...
Click to collapse
ok i will send build base zip

@deeevan & @yatindroid.
I'm away from my computer until Friday so can't upload my aroma reset to stock until then.
I never uploaded it coz I haven't had a chance to test it ( deeevan understands why) as 6.11.980.12 is still the latest OTA for Optus Australia, and that's the version my reset will take you back to.
When I get home I'll post a link on the Aussie m7 thread and I'll pm the link to you as well yatindroid in case u need to pass on to others. @deeevan below is the link (go back a page or two,) where @alray walks me through how to make your own aroma reset. All u need is a RUU/OTA of what version u wanna go back to, any old aroma reset .zip and @alray s detailed instructions and your set.
http://forum.xda-developers.com/htc...ersions-stock-rom-t2994683/page4#post59335167
Have a good one guys!

yatindroid said:
ok i will send build base zip
Click to expand...
Click to collapse
Thanks! 6MB is much nicer to download than 1GB+, especially when I'm going to delete most of that anyway

yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren

Azurewren said:
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren
Click to expand...
Click to collapse
You can't use that guru reset rom to restore your phone, its way to old, your phone is running the 7.21.980.22 firmware so you would need a 7.21.980.2 or 7.21.980.22 guru reset rom and unfortunately there are no guru reset roms for 7.xx.xxx.x version. You can't make a guru reset rom from an ota update. ota updates are only patches, not the entire system and even if it would be possible to do it, you would have the same problem since the reset rom wouldn't match your firmware version.
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.

alray said:
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.
Click to expand...
Click to collapse
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers

Azurewren said:
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers
Click to expand...
Click to collapse
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.

alray said:
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.
Click to expand...
Click to collapse
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]

Azurewren said:
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]
Click to expand...
Click to collapse
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?

alray said:
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?
Click to expand...
Click to collapse
Yep, I followed the instructions you linked for me.

Azurewren said:
Yep, I followed the instructions you linked for me.
Click to expand...
Click to collapse
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/

alray said:
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/
Click to expand...
Click to collapse
Okay. Downloaded and verified. The file I am using has the same md5 value as what you commented up above.