Database Develop

[Q] My Telus Diamond has died.

Hello,I was playing around with my phone and trying to put Xdadroid on it but it did no't work so i removed all the data from the internal storage then i rebooted my phone and it was fine but would no't charge from my wallcharger so i connected it to my computer and my computer said it was connected but their was no drive that said it was...so then i took out the battery and no it won't turn on.So i was reading around here and it said to press vol down-power and enter (the circle) and it took me to a screen starting from top red green blue and white saying security unlocked and at the bottom it said serial but when i plug it into my computer the serial would change to usb but it would not show up on my computer,what do i do i really need help
thanks orangeplug

HINT Reply
orangeplug said:
Hello,I was playing around with my phone and trying to put Xdadroid on it but it did no't work so i removed all the data from the internal storage then i rebooted my phone and it was fine but would no't charge from my wallcharger so i connected it to my computer and my computer said it was connected but their was no drive that said it was...so then i took out the battery and no it won't turn on.So i was reading around here and it said to press vol down-power and enter (the circle) and it took me to a screen starting from top red green blue and white saying security unlocked and at the bottom it said serial but when i plug it into my computer the serial would change to usb but it would not show up on my computer,what do i do i really need help
thanks orangeplug
Click to expand...
Click to collapse
Try turning off the device, then turning it back on again.
- 2 Bunny

Yes I have,i can boot it into TF3D but then it shuts off once it done completely booting up,is it my battery?

NOT TO OVERSTATE THE OBVIOUS Reply
orangeplug said:
Yes I have,i can boot it into TF3D but then it shuts off once it done completely booting up,is it my battery?
Click to expand...
Click to collapse
Are you plugged into mains or even USB? You've gotta juice up the machine. How much battery do you have left?
- 2 Bunny

Yes I am...fully charged

HALF EMPTY? Reply
orangeplug said:
Yes I am...fully charged
Click to expand...
Click to collapse
The device is fully charged, but it shuts off before it gets the chance to finish booting up?
- 2 Bunny

Yes.Even when its plunged in via usb

HARDWARE Reply
orangeplug said:
Yes.Even when its plunged in via usb
Click to expand...
Click to collapse
Is it because of TF3D or because of the hardware?
- 2 Bunny

turn off the phone.
plug in the charger.
you should see the lights ramping indicating its charging.
let it finish charging (full circle lit)
reboot.
if still not functional try hard reset or reflash.

NOT A DIFFICULT QUESTION Reply
Is it because of TF3D or is it because of the Hardware?
- 2 Bunny

I missed where he said it was full charge.
I have seen a bad battery do that.
the phone or rom could also be responsible.
A good clue is does it always shout off at exactly the same point of start, or does it vary a bit.
typically a bad battery will fail quicker immediately after a failure

HARDWARE OR TF3D PROBLEM Reply
Is the problem because of TF3D or because of the hardware?
- 2 Bunny

Nevermind. I feel so dumb right now

My Xperia is rooted, has recovery and the bootloader is unlocked, I use the stock ROM.
It went smoothly (done it several months ago), but yesterday, the battery emptied so I put it on charge. Today I tried to turn it on, but it didn't work; whenever I press the power button, the LED blinks red. I tried fastboot and flashmode, but none of it works. My PC detects it as an unknown device when I try to turn it on. once
If that helps, it turns on once in a while with CWM.
Anyone can help?
____
EDIT: looks like I used a loose cable and the battery didn't charge at all. God, I feel so dumb.

Georges2251 said:
My Xperia is rooted, has recovery and the bootloader is unlocked, I use the stock ROM.
It went smoothly (done it several months ago), but yesterday, the battery emptied so I put it on charge. Today I tried to turn it on, but it didn't work; whenever I press the power button, the LED blinks red. I tried fastboot and flashmode, but none of it works. My PC detects it as an unknown device when I try to turn it on. once
If that helps, it turns on once in a while with CWM.
Anyone can help?
Click to expand...
Click to collapse
hello;
I had the same problem , I searched on the web for solutions and found something like charging phone overnight , key combinations but nothing helped; my phone was completely dead ; but I did something and phone is now alive; I removed screw of the phone , opened panel; removed battery connector and connected phone to wall charger , by this time phone showed sony logo like on startup , then immediately connected battery connector and left phone to charge for several minutes ; it was showing only sony logo when was charging, after 15-20 minutes disconnected phone from charger , screen went off and after this i reconnected charger, it showed battery screen and started charging with battery and thunder logo; thats all, it was the only solution for me.

geniusatplay said:
hello;
I had the same problem , I searched on the web for solutions and found something like charging phone overnight , key combinations but nothing helped; my phone was completely dead ; but I did something and phone is now alive; I removed screw of the phone , opened panel; removed battery connector and connected phone to wall charger , by this time phone showed sony logo like on startup , then immediately connected battery connector and left phone to charge for several minutes ; it was showing only sony logo when was charging, after 15-20 minutes disconnected phone from charger , screen went off and after this i reconnected charger, it showed battery screen and started charging with battery and thunder logo; thats all, it was the only solution for me.
Click to expand...
Click to collapse
I'm so sorry for causing you the trouble of this....
Turned out that the cable I used is loose and it didn't charge or anything

[Q] Xperia z won't Boot but weird situation only for XPERIA GURU

Hi wonderful XDA forums, i'm an italian user, then sorry for my bad english.
I'm in a very strange situation, the new year starts strange for me.
Yesterday trying to short circuit the resistor to make the vibration works again( i read on internet and i see that works with other Xperia Z), the phone power down and won't boot anymore.
The strange things appears now, when i plug the usb cable for charge the phone, nothing appear, no LED, but if i disconnect the battery with the USB cable plugged-in the led blink red one time then blink a second time and become blue, and if i press volume down immediately afer the first led red blink, the led become green for 1 sec and the phone go in Download Mode.
When i use original Sony charger same situation, but when i disconnect the battery the led blink red 1 time and stays on and the phone shows SONY logo but immediately reboots go in a bootloop like this, red 1 time and stays on and the phone shows SONY logo but immediately reboots, i noticed that if i press power button several times after the SONY logo i can see the low battery icon but if stop to press the button the screen goes off and restart the bootloop describes upper.
I try several wall charger, and several cables oviusly the original SONY USB cable and wall charger, but nothing change, the battery is new and works because i test it with another phone.
Connecting to PC i can flash rom ftf with FlashTool without errors, but at the end of the process the phone won't boot, and won't charge same problems.
I noticed that the phone can't be recognise if the battery is connected, just when i disconnect the battery the phone go in fastboot mode or in download mode, for example when i flash a new ROM with flashtool when ask to connect the phone i must disconnect the battery and press volume down (in this way the PC recognise the phone, and the phone go in download mode) then i can connect or left disconnect the battery, anyway the flash operation would be OK but nothing change.
Sometimes when i connect the phone to PC the system ask me for QHSUBS_DLOAD drivers and sometimes the phone is recognised with SOMC FLASH....
I know this is a very bad situation, only Xperia Guru's can help me, but probably this phone is dead.
But I trust in XDA Community and i know that is the only place i can get serious and valid reply
Regards Samuel

this sounds exactly like what happened to me
This is extremely weird this happened on the same day... ?

Hi friends, welcome to soft brick world i think.. But i m happy and unhappy that i am not the only one in this weird situation..:silly:

"short circuit the resistor to make the vibration works again" thank god I didn't try it.. otherwise I'd end up with dead device

XSP won't charge or boot

Hi
I am stuck with a phone that won't boot, charge, or be detected by flashtool (or windows) and will not boot in flashmode/fastboot either.
I had plugged in the phone for charging when the battery was considerably low ~ 5-10% before I went to sleep. I remember the red LED glowing, meaning the phone must've been charging.
The next morning I check the phone, the LED was STILL red and the handset was kind of dead - no response at all, whatsoever. Even the reset button on the bacl panel doesn't work (no vibration).
The phone was running BlissPop (5.1.1) with Tangerine kernel.
Now when I plug in the phone for charging, nothing happens at all, not even the red LED. The LED does glow red for as long as I press and hold the power button while it is plugged in (both PC and wall outlet)
I took it to the service center; they say they'll have to change the motherboard. Obviously the phone is not in warranty and there is no way I can pay 10,000 INR that Sony is demanding for the job.
Someone somewhere in the forums suggested allowing the battery to drain completely, but I don't think my battery is holding any charge.
Can anyone help me out?
Thanks

msainani said:
Hi
Can anyone help me out?
Thanks
Click to expand...
Click to collapse
1. Press and hold the reset button for 8 seconds and check if it vibrates. Now plug in charger as there is a possibility that phone is not booting because of insufficient charge.
2. Charge for atleast 20 min without switching on phone.
3. Make sure flashtool is installed properly and so as drivers.
4. Flash Stock ftf
If the above didnt work then try Fastboot mode and simply flash Tangerine kernel.
If nothing works, then its an hardware issue and there is no point in spending 10k in repairing.
Get yourself a brand new Moto G or yureka.

http://forum.xda-developers.com/showthread.php?t=2717303 <- this guy had a pretty similar problem and managed to fix it
I was following the steps he provided: i plugged the phone to PC and held the power button pressed. Surprisingly the PC did recognize the phone after a while- but it was only momentarily and the red LED also stopped glowing. Unfortunately I haven't been able to reproduce a similar situation after that.

bump!

[Q] Strange (hard?) brick

Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?

Qba_S said:
Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?
Click to expand...
Click to collapse
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!

tilakpatel22 said:
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!
Click to expand...
Click to collapse
Thanks for the info! I've ordered a replacement battery already.
I'll open my phone today and measure all voltages. I'll keep you updated.

Good luck

tilakpatel22 said:
Good luck
Click to expand...
Click to collapse
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...

Qba_S said:
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...
Click to expand...
Click to collapse
no problem