hello...
please give me some help..
I am beginner on android, flashing and so on...
I have an S4 active, with 4.4.2 with Baseband version "I9295XXUCNI1".
I want to install the 5.0.1 version, but on sammobile, the only version available for "I9295XXUCNI1" is 4.4.2.
There is 5.0.1 available with PDA I9295XXUDOD3 and CSC I9295XXUDOD1..
Is it safe to install that room?
gabrielstroe said:
hello...
please give me some help..
I am beginner on android, flashing and so on...
I have an S4 active, with 4.4.2 with Baseband version "I9295XXUCNI1".
I want to install the 5.0.1 version, but on sammobile, the only version available for "I9295XXUCNI1" is 4.4.2.
There is 5.0.1 available with PDA I9295XXUDOD3 and CSC I9295XXUDOD1..
Is it safe to install that room?
Click to expand...
Click to collapse
Yes, you can install nearly any of the firmwares from the sammobile site. If you're asking which firmware would be the best to flash to your device, it depends where you are located. The NI1 firmware is available for several different countries, so I would flash the firmware for your region, it should be optimized to best work on your networks.
update: I installed the DOD3... it worked!!
gabrielstroe said:
update: I installed the DOD3... it worked!!
Click to expand...
Click to collapse
another question.... my cousin have S4 i9505, with 4.4.2, root-ed....
Do I have to unroot it first or I can install the new official firmware over it?
I have downloaded the 5.0.1 firmware....
gabrielstroe said:
another question.... my cousin have S4 i9505, with 4.4.2, root-ed....
Do I have to unroot it first or I can install the new official firmware over it?
I have downloaded the 5.0.1 firmware....
Click to expand...
Click to collapse
When you flash the firmware through Odin it will completely wipe the device, it doesn't matter if you're rooted or not.
thank you
but what if the S4 is locked to orange carrier?
The firmware I have downloaded is carrier free...
is there any problem?
I am afraid of bricking the phone.... I understood the root will not be a problem, but I am afraid of the lock carrier.... the baseband is not the same as the one installed on the phone now
Hello, I cannot downgrade to Nougat, I keep getting "Sw Rev Check Fail Device 2 Binary 1" on the phone side and ODIN simply says failed. When I try to downgrade from Oreo to Nougat. I have not been able to enable "OEM Unlock".
BTW, Sorry for incomplete title as the title bar disappears and I can only type a little bit.
Kenchinito said:
Hello, I cannot downgrade to Nougat, I keep getting "Sw Rev Check Fail Device 2 Binary 1" on the phone side and ODIN simply says failed. When I try to downgrade from Oreo to Nougat. I have not been able to enable "OEM Unlock".
BTW, Sorry for incomplete title as the title bar disappears and I can only type a little bit.
Click to expand...
Click to collapse
What model do you have? And what firmware version were you on before trying to downgrade? Some firmwares include bootloader updates which cannot be rolled back.
I have a N950F and this is the Oreo image I succesfully flashed "BL_N950FXXU3CRC1_CL13094739_QB17155977_REV00_user_low_ship.tar"
I can flash "COMBINATION_FA71_N950FXXU3ARA5" without a problem which is 7.1.1 But I think it's the bootloader that is giving me issues and since the combination file doesn't include a bootloader (AFAIK) it goes through, but when I try to put in any bootloader from Nougat, the flash fails.
I tried flashing:
-BL_N950FXXU1AQI1_CL12007350_QB14830234_REV00_user_low_ship.tar
-BL_N950FXXU1AQHB_CL12007350_QB14652984_REV00_user_low_ship.tar
and both failed. It's important to note that I'm trying to flash the whole thing, not just the "BL" file. I just pasted the BL file name because I think it holds the information you need.
Ok thanks for providing the info. One more question, what Odin version are you using?
It is not possible to downgrade.
sefrcoko said:
Ok thanks for providing the info. One more question, what Odin version are you using?
Click to expand...
Click to collapse
3.13.1
I have a similar problem. Bought my N950F in Panama but I'd like to change to Brazil's ZTO(unbranded) to be able to use Samsung Pay there.
I got Odin 3.13.1 and the ROM N950FXXU3CRDF_N950FOXM3CRE4_ZTO (latest 8.0.0) from SamMobile. When I try to flash I get the "Check Fail BOOTLOADER" message. Trying to uncheck the BL, I get another error but also not able to flash. Maybe my phone has a newer version that doesn't allow it to in theory "downgrade"?
Any solution?
carlosedp said:
I have a similar problem. Bought my N950F in Panama but I'd like to change to Brazil's ZTO(unbranded) to be able to use Samsung Pay there.
I got Odin 3.13.1 and the ROM N950FXXU3CRDF_N950FOXM3CRE4_ZTO (latest 8.0.0) from SamMobile. When I try to flash I get the "Check Fail BOOTLOADER" message. Trying to uncheck the BL, I get another error but also not able to flash. Maybe my phone has a newer version that doesn't allow it to in theory "downgrade"?
Any solution?
Click to expand...
Click to collapse
Yes some bootloaders can't be downgraded to earlier ones. What firmware version are you coming from?
sefrcoko said:
Yes some bootloaders can't be downgraded to earlier ones. What firmware version are you coming from?
Click to expand...
Click to collapse
@sefrcoko, I'm currently on Android 8.0.0, Baseband N950FXXU4CRG8, Build number R16NW.N950FXXU4CRGA.
I don't know if this is older or newer than the one I'm trying to flash. Is there a way to do it?
Thanks!
carlosedp said:
@sefrcoko, I'm currently on Android 8.0.0, Baseband N950FXXU4CRG8, Build number R16NW.N950FXXU4CRGA.
I don't know if this is older or newer than the one I'm trying to flash. Is there a way to do it?
Thanks!
Click to expand...
Click to collapse
Hi, yes you are on the "U4" bootloader and trying to downgrade to the "U3" bootloader (look at those characters in the build numbers, that's the bootloader version). Can't downgrade from u4 to u3 though.
sefrcoko said:
Hi, yes you are on the "U4" bootloader and trying to downgrade to the "U3" bootloader (look at those characters in the build numbers, that's the bootloader version). Can't downgrade from u4 to u3 though.
Click to expand...
Click to collapse
@sefrcoko this build number can bootloader unlock? i have same build number, i plan to unlock bootloader
paroys said:
@sefrcoko this build number can bootloader unlock? i have same build number, i plan to unlock bootloader
Click to expand...
Click to collapse
The Exynos models are all bootloader unlocked as far as I know.
sefrcoko said:
The Exynos models are all bootloader unlocked as far as I know.
Click to expand...
Click to collapse
Thanks , I'm already rooted haha:cyclops:
Can I flash everything except the bootloader? Will it work?
Do I have any option?
Thanks!
I have a ATT s7 edge. I was running on g935AATT4CRE4. Oreo. I found a firmware that was a 935U firmware. I flashed it with Odin with no problems. I liked it a lot. I wanted to go back and compare the 2. I know, kind of dumb. I had issues flashing original firmware listed above. I did some research, I downloaded latest att software and flashed it. Worked fine. Here is Build number G935AUCS8CRK1 . Now I cannot go back and flash the 935u firmware. I have noticed the 5th digit from the end is now 8 and not 4. Could this be issue? Any ideas.
This is snapdragon
G935UOYM4BQD2 this is unlocked firmware
mikewv100 said:
I have a ATT s7 edge. I was running on g935AATT4CRE4. Oreo. I found a firmware that was a 935U firmware. I flashed it with Odin with no problems. I liked it a lot. I wanted to go back and compare the 2. I know, kind of dumb. I had issues flashing original firmware listed above. I did some research, I downloaded latest att software and flashed it. Worked fine. Here is Build number G935AUCS8CRK1 . Now I cannot go back and flash the 935u firmware. I have noticed the 5th digit from the end is now 8 and not 4. Could this be issue? Any ideas.
This is snapdragon
G935UOYM4BQD2 this is unlocked firmware
Click to expand...
Click to collapse
You are correct. There is an 8 version on the U firmware that will work though
Any idea where I can find the u version?
Found it on Sam mobile. Thanks
Is there a place to download this firmware without paying?
I found version 8 935u firmware. Used odin correctly. It flashed and said passed in green. Kept rebooting to samsung power on screen. What am I doing wrong?
You need to download and flash the SM-935U 8.0 firmware that matches your baseband version exactly if you scroll down you will see an USA(AT&T) version that matches your baseband that is the one you need.
luke311 said:
You need to download and flash the SM-935U 8.0 firmware that matches your baseband version exactly if you scroll down you will see an USA(AT&T) version that matches your baseband that is the one you need.
Click to expand...
Click to collapse
So just to clarify. My baseband is G935AUCS8CRJ2 can I flash this Unlocked firmware? G935UUEU8CRJ2
If so, do I use all of the parts in Odin, or just AP?
luke311 said:
You need to download and flash the SM-935U 8.0 firmware that matches your baseband version exactly if you scroll down you will see an USA(AT&T) version that matches your baseband that is the one you need.
Click to expand...
Click to collapse
Thank u very much. I had flashed the wrong 935u firmware 4 times and had to go back to 935a. USing your direction, I am on 935a
no update samsung Note 9 AT&T unlocked phone in another region without AT&T sim card
Hello everyone i've been really struggling with updating my phone that i got pre-owned It's a Samsung Galaxy Note 9 (SM-N960U) and I have not recieved updates since I got it the phone is still on Android version 8.1.0 and security patch from 2018 so i've been really wanting to update it to the latest version but I couldn't and i figured out that phones from AT&T only update via their own app or OTA thing anyway I thought of flashing it with a stock firmware VIA ODIN but i checked on sammobile that the note 9 AT&T csc only has 1 update and thats 8.1.0 also so i was wondering if i can use some other firmware to flash it or do i change csc? would that work if i changed the csc or am i gonna have baseband and signal issues? I tried KIES it said it didnt recognize my phone probably because the software version has never been updated and very old , i wanted to flash it to a different CSC than AT&T but i dont think thats a good idea, please help
ep1kku said:
Hello everyone i've been really struggling with updating my phone that i got pre-owned It's a Samsung Galaxy Note 9 (SM-N960U) and I have not recieved updates since I got it the phone is still on Android version 8.1.0 and security patch from 2018 so i've been really wanting to update it to the latest version but I couldn't and i figured out that phones from AT&T only update via their own app or OTA thing anyway I thought of flashing it with a stock firmware VIA ODIN but i checked on sammobile that the note 9 AT&T csc only has 1 update and thats 8.1.0 also so i was wondering if i can use some other firmware to flash it or do i change csc? would that work if i changed the csc or am i gonna have baseband and signal issues? I tried KIES it said it didnt recognize my phone probably because the software version has never been updated and very old , i wanted to flash it to a different CSC than AT&T but i dont think thats a good idea, please help
Click to expand...
Click to collapse
Kies is for older Samsung devices, Smart Switch is for newer Samsung devices.
Here is a list of firmware at Sammobile that has android 10 for your device. They are for T-mobile but I'm pretty sure it can be used on the AT&T Note 9.
https://www.sammobile.com/samsung/galaxy-note9/firmware/sm-n960u/tmb/
Here is a thread for AT&T note 9 where another user flashed their Note 9 with firmware from another carrier. Use the T-Mobile firmware and follow the steps from post #4 of the thread linked below.
https://forum.xda-developers.com/galaxy-note-9/help/please-help-flashing-att-n960u-firmware-t4107287
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Kies is for older Samsung devices, Smart Switch is for newer Samsung devices.
Here is a list of firmware at Sammobile that has android 10 for your device. They are for T-mobile but I'm pretty sure it can be used on the AT&T Note 9.
https://www.sammobile.com/samsung/galaxy-note9/firmware/sm-n960u/tmb/
Here is a thread for AT&T note 9 where another user flashed their Note 9 with firmware from another carrier. Use the T-Mobile firmware and follow the steps from post #4 of the thread linked below.
https://forum.xda-developers.com/galaxy-note-9/help/please-help-flashing-att-n960u-firmware-t4107287
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
hey thanks for replying so basically i can flash my phone to any other csc because it's unlocked correct? i live in Saudi Arabia so is the reception or whatever gonna get messed up by chance if i flash to something other than AT&T? thanks again.
ep1kku said:
hey thanks for replying so basically i can flash my phone to any other csc because it's unlocked correct? i live in Saudi Arabia so is the reception or whatever gonna get messed up by chance if i flash to something other than AT&T? thanks again.
Click to expand...
Click to collapse
Read post #4 of the thread that I linked, it will tell you everything you need to know.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Read post #4 of the thread that I linked, it will tell you everything you need to know.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
yeah but my phone is sm-n960u not sm-n960u1 what should i be changing in the methods?
ep1kku said:
yeah but my phone is sm-n960u not sm-n960u1 what should i be changing in the methods?
Click to expand...
Click to collapse
So, all the SM960U devices are the same. Just flash the T-Mobile firmware.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
So, all the SM960U devices are the same. Just flash the T-Mobile firmware.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
oh alright, tyvm im gonna go through with it and update you how it goes, ty for the help and response :highfive:
Hello people, having exactly the same problem, so its a SM-N960U phone, unlocked from AT&T. First to say, im not in the US, dont have AT&T sim, the phone is updated to android 10 with 2.0ui, with baseband ver. N960USQS3DTB1.
Now somewhere i read that bootloader must be unlocked in order even to begin thinking of flashind the device, dont know how accurate that is... Id like to ask the Owner of the post, if he was able to make it, to update his firmware. And if so did he indeed succeded from the link above from ep1kku ?
Denis95M said:
Hello people, having exactly the same problem, so its a SM-N960U phone, unlocked from AT&T. First to say, im not in the US, dont have AT&T sim, the phone is updated to android 10 with 2.0ui, with baseband ver. N960USQS3DTB1.
Now somewhere i read that bootloader must be unlocked in order even to begin thinking of flashind the device, dont know how accurate that is... Id like to ask the Owner of the post, if he was able to make it, to update his firmware. And if so did he indeed succeded from the link above from ep1kku ?
Click to expand...
Click to collapse
No, the bootloader does not need to be unlocked before flashing if you are flashing stock software, unlocked bootloader is required to flash custom software, not stock software. There are some manufacturers that require unlocking bootloader even when flashing stock software but Samsung is not and probably never will be one of them.
You can flash your device with stock firmware any time you want, provided that the firmware is not a firmware that is older than your currently installed firmware and if the firmware is for your model number or an equivalent variant of your device with a similar model number and the same CPU series.
Droidriven said:
No, the bootloader does not need to be unlocked before flashing if you are flashing stock software, unlocked bootloader is required to flash custom software, not stock software.
You can flash your device with stock firmware any time you want, provided that the firmware is not a firmware that is older than your currently installed firmware and if the firmware is for your model number or an equivalent variant of your device with a similar model number and the same CPU series.
Click to expand...
Click to collapse
Wow didn't know that, well how to find out if the firmware on my device is stock or not, im trying to flash for a week now, odin keeps giving me error ... All threads succed 0/1 no idea whats up with that
Denis95M said:
Wow didn't know that, well how to find out if the firmware on my device is stock or not, im trying to flash for a week now, odin keeps giving me error ... All threads succed 0/1 no idea whats up with that
Click to expand...
Click to collapse
You can boot into download mode and it should say whether the firmware is "official" or "custom".
As I said, you can flash stock firmware provided that the firmware that you are flashing is not older than your current firmware, you can't downgrade the firmware, you can only flash an equivalent firmware to what is already on the device or a newer, updated firmware. Your error may be due to this. For all Samsung firmware, the 5th character from the right in the build number is referred to as the binary version. Your currently installed firmware has a "3" for the binary version, this means you can only flash a firmware that also has a binary 3 or you can flash a firmware that has a number higher than 3 but you can not flash a firmware that has a binary that is lower than 3(you can not flash a binary 1 or 2 firmware).
Depending on the specific error that you got, this could be your issue. What was the specific error that you got?
Droidriven said:
You can boot into download mode and it should say whether the firmware is "official" or "custom".
As I said, you can flash stock firmware provided that the firmware that you are flashing is not older than your current firmware, you can't downgrade the firmware, you can only flash an equivalent firmware to what is already on the device or a newer, updated firmware. Your error may be due to this. For all Samsung firmware, the 5th character from the right in the build number is referred to as the binary version. Your currently installed firmware has a "3" for the binary version, this means you can only flash a firmware that also has a binary 3 or you can flash a firmware that has a number higher than 3 but you can not flash a firmware that has a binary that is lower than 3(you can not flash a binary 1 or 2 firmware).
Depending on the specific error that you got, this could be your issue. What was the specific error that you got?
Click to expand...
Click to collapse
I got you, well iv got into download mode many times, its say official, so in theory i can flash official release right, but keeps ending with that odin error, no idea ... Could it be because im in different region than the device's market, its a US market phone like i said, in from europe
Denis95M said:
I got you, well iv got into download mode many times, its say official, so in theory i can flash official release right, but keeps ending with that odin error, no idea ... Could it be because im in different region than the device's market, its a US market phone like i said, in from europe
Click to expand...
Click to collapse
When using Odin, in the box that shows the flashing process, it should say exactly which error you are getting. When I asked what error you are getting, I was not asking "why" you are getting the error, I'm asking what it says in that box. Post the exact name of the error. Try to flash the device, while it is flashing, watch the dialog box in Odin, when it gives the error, take note of exactly what the error is, you can scroll up and down within the box and read all of the output data in that field.
Yes, it could be due to being from a different region but I doubt it. It could also be because your device is a Snapdragon version but the firmware that you are trying to flash could be for a Exynos version instead, or vice versa.
Droidriven said:
When using Odin, in the box that shows the flashing process, it should say exactly which error you are getting. When I asked what error you are getting, I was not asking "why" you are getting the error, I'm asking what it says in that box. Post the exact name of the error. Try to flash the device, while it is flashing, watch the dialog box in Odin, when it gives the error, take note of exactly what the error is, you can scroll up and down within the box and read all of the output data in that field.
Yes, it could be due to being from a different region but I doubt it. It could also be because your device is a Snapdragon version but the firmware that you are trying to flash could be for a Exynos version instead, or vice versa.
Click to expand...
Click to collapse
Yes i know that i cant downgrade, well all software that i attempt to flash is downloaded from sammobile, my binary is v3, but one problem, all at&t release for that model is the original one, with android 8.1 ... So i try U1 model still didn't work, my software is official, says in download mode
Denis95M said:
Yes i know that i cant downgrade, well all software that i attempt to flash is downloaded from sammobile, my binary is v3, but one problem, all at&t release for that model is the original one, with android 8.1 ... So i try U1 model still didn't work, my software is official, says in download mode
Click to expand...
Click to collapse
You still aren't telling me the SPECIFIC error that you are getting in the dialog box in Odin. That has been the most important question to understand your issue but you keep dodging it. Flash the firmware, watch for the error, take note of exactly what error it says it is, then post exactly what it says the error is. If you can't post that then there is no point in replying.
If you are trying to flash the device in a different region, you may not need to flash the whole firmware from the different region, you may be able to flash just the modem.img from the alternative firmware. To do this, extract the firmware, find the modem.img then convert that modem.img into an Odin flashable .tar using 7zip with its highest level of compression, then flash the modem.img.tar via Odin.
Droidriven said:
You still aren't telling me the SPECIFIC error that you are getting in the dialog box in Odin. That has been the most important question to understand your issue but you keep dodging it. Flash the firmware, watch for the error, take note of exactly what error it says it is, then post exactly what it says the error is.
Click to expand...
Click to collapse
Sorry rigth in posting screen shot of the error.
Denis95M said:
Sorry rigth in posting screen shot of the error.
Click to expand...
Click to collapse
I added to my previous post.
Strange, your screenshot doesn't show an error, it just stops without giving an error.
I'm assuming that your firmware came in multiple parts with some CSC files? If so, try flashing without using the CSC files.
Droidriven said:
I added to my previous post.
Strange, your screenshot doesn't show an error, it just stops without giving an error.
I'm assuming that your firmware came in multiple parts with some CSC files? If so, try flashing without using the CSC files.
Click to expand...
Click to collapse
Right tonight i will try when I'm home, could it be thoug because of wrong firmware ?
Denis95M said:
Right tonight i will try when I'm home, could it be thoug because of wrong firmware ?
Click to expand...
Click to collapse
Give me a link to the firmware that you downloaded and I'll compare to see if it is supposed to work.
Droidriven said:
Give me a link to the firmware that you downloaded and I'll compare to see if it is supposed to work.
Click to expand...
Click to collapse
Alright, https://www.sammobile.com/samsung/galaxy-note9/firmware/#SM-N960U this is without the carrier, if you put at&t in search menu, you will see that only 1 is available, with android 8.1
So i tried U1, version at&t https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960U1/ATT/#SM-N960U1 also didn't work, i tried T-mobile on same U1 model, also didn't work. Everytime same error/none error like on the screen shot