Hi friends,
I want to attach to my touchpad memory card reader and external hard drive.
I wonder if it will be possible instead of buying Y cable and connect it to the OTG, to use my existing USB hub and connect to him the devices and the external battery bank.
Will it work?
Thanks
avizov2 said:
Hi friends,
I want to attach to my touchpad memory card reader and external hard drive.
I wonder if it will be possible instead of buying Y cable and connect it to the OTG, to use my existing USB hub and connect to him the devices and the external battery bank.
Will it work?
Thanks
Click to expand...
Click to collapse
im assuming youre talking about doing this in android 4.0.x +. if so then yes you should be able to connect an externally powered usb hub to the OTG cable and connect more than one device at a time.
Thanks
haxin said:
im assuming youre talking about doing this in android 4.0.x +. if so then yes you should be able to connect an externally powered usb hub to the OTG cable and connect more than one device at a time.
Click to expand...
Click to collapse
Yes android 4.
to be precise, I don't have powered usb hub.
I have normal usb hub which I will connect him the power with usb battery bank device.
will it work?
avizov2 said:
Yes android 4.
to be precise, I don't have powered usb hub.
I have normal usb hub which I will connect him the power with usb battery bank device.
will it work?
Click to expand...
Click to collapse
Yes. You need to give power to the periphal usb devices. I tried the same yesterday, without problems.
Hey all
I have a powered Belkin USB hub (this one: http://www.belkin.com/us/F4U040-Belkin/p/P-F4U040), coupled with an OTG cable which I know work together, as my Kindle Fire recognizes all USB devices through this setup (Keyboard, Mouse, Flash Drive etc).
I was surprised to find that my HP touchpad does not recognize any devices connected to this hub.
I did some diagnostics with USB Device Utility, and the touchpad recognizes my USB OTG cable, as it shows as a 'Qualcomm On-Chip EHCI Host Controller'.
The touchpad simply does not see anything plugged into the hub, be it a keyboard, mouse or flash drive.
Please help me here, guys!
What am I doing wrong?
Thanks
MainCourse said:
Hey all
I have a powered Belkin USB hub (this one: http://www.belkin.com/us/F4U040-Belkin/p/P-F4U040), coupled with an OTG cable which I know work together, as my Kindle Fire recognizes all USB devices through this setup (Keyboard, Mouse, Flash Drive etc).
I was surprised to find that my HP touchpad does not recognize any devices connected to this hub.
I did some diagnostics with USB Device Utility, and the touchpad recognizes my USB OTG cable, as it shows as a 'Qualcomm On-Chip EHCI Host Controller'.
The touchpad simply does not see anything plugged into the hub, be it a keyboard, mouse or flash drive.
Please help me here, guys!
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
Are you sure that's powered? The picture doesn't show any DC connectors. Is it powered by something like a mini USB to USB cable on the back? If so, that might not be enough to power the device and the peripherals attached to the ports.
Belkin Hub
Daistaar said:
Are you sure that's powered? The picture doesn't show any DC connectors. Is it powered by something like a mini USB to USB cable on the back? If so, that might not be enough to power the device and the peripherals attached to the ports.
Click to expand...
Click to collapse
The belkin does have an external dc power supply and is not powered via usb
I think you need a Y cable even with a powered hub as its purpose is to inject power back into the OTG chip in the Touchpad.
Hello,
I have a problem that I can only connect phone in USB mass storage mode if I am using LG cable which came with the charger.
When I connect it with my WD USB cable the phone charges, but it does not give me the option to choose mass storage or any other type of connectivity.
Please help.
Hello every1.
I have a problem here.
When I plug in my USB cable to my S4A and connect it to PC, I get only charging and NO USB CONNECTION.
No USB debugging, no anything but phone charging.
Anyone has an idea what of system files should I look at for that?
I've tried SG Mass Storage enabler (https://play.google.com/store/apps/details?id=com.mohammadag.samsungusbmassstorageenabler) and after that it stop connecting.
What does that app do and change, so what should I revert to stock state??
Please help.
Some Windows setup needs to be repaired to properly identify USB connected hardware. I have a link to fix it in my thread
http://forum.xda-developers.com/showthread.php?p=56955843
when i trying to connect my to pc its showing Phone is in USB host mode and wont charge....does anyone know why it is happening.....when i connect my charger no problem...charging is fine
Hello,
I have an AUKEY CB-C32 USB hub with Ethernet adapter. I tried (just out of interest) if this device is working with my Nexus 5X. But the problem is, that my phone does not recognize the adapter. Nothing happens when I connect the adapter to the Nexus. Also the LED indicator on the adapter does not shine.
Why is this device not recognized?
Best regards,
wewa
PS: Yes, I connected the correct cable/port to my phone.