Database Develop

[Q] Restoring Rogers HTC One M7 to Factory without RUU ?

Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
WARNING: i'm the second owner of the phone. For warranty I would have had to send the phone to HTC. I suspect the HTC warranty won't apply to me anyhow. I suggest that in this situation, people just get the phone fixed on warranty if they have that option
First Steps:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ? (SEE UPDATE BELOW)
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ? (SEE UPDATE BELOW)
Thanks in advance !

same issue
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
LRail said:
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
So far:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ?
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ?
Q3) If I eventually decide to install the Developer Edition firmware.. will the phone be effectively be a Dev phone ? (OTA updates... factory recovery/locked bootloader... no ID issues in the future..)
Thanks in advance !
P.S. For pure curiousity.... Am I correct in believing that revone can't clear the "tamper" flag and lock the bootloader with the custom recovery ?
Click to expand...
Click to collapse

double post

omgkush said:
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
Click to expand...
Click to collapse
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe

Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.

LRail said:
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Click to expand...
Click to collapse
Tampered will come back the second you flash a recovery. Best to stay S-OFF

I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great

ysl00 said:
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
Click to expand...
Click to collapse
Thanks for the heads up. If I get a bunch of free time I may just test that after doing a new full backup.
Not sure about the Rogers 4.3 OTA.
I'm running currently the phone with Developer Edition ROM+CID and can confirm that it's 4.3 OTA updates hboot to 1.55.
After the update my phone is still s-off.
I have previously rolled back to an older hboot via a firmware flash.
Since the phone is still S-OFF, I assume I can do that again if needed.

EddyOS said:
Tampered will come back the second you flash a recovery. Best to stay S-OFF
Click to expand...
Click to collapse
Thanks For the reply Eddy.
Recovery flashing sets the tampered flag even if it's a factory recovery from an OTA being flashed ?
I agree on the S-OFF normally.
This was a test to see if I could get it back to full stock for warranty if needed, and S-OFF would not be acceptable in that case.

please help!
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!

So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?

millarrjm said:
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
Click to expand...
Click to collapse
Esposition said:
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
Click to expand...
Click to collapse
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA

re.
LRail said:
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I tried that. CWM version 6.+ doesn't save to the backup folder anymore. And won't read a restore I put in it either... Ie. The rogers off the bugzylawson site.

bklam said:
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
Click to expand...
Click to collapse
Hello bklam,
Sorry, I missed your question.
No. I used CWM only to restore the "Whampahoofus"' nandroid backup.
That backup is "almost" 100% stock. Unfortunately it contains a custom recovery and won't (in my experience) work for normal OTA updates.
To solve this I decided to extract the factory firmware from one of the old Rogers OTA ("unrar" will extact the files from the OTA), and flash that.
To flash it I used the quick instructions in the 1st post of this thread-->http://forum.xda-developers.com/showthread.php?t=2182823
(I believe there were more details instructions on firmware.zip flashing in another thread but I can't find it at the moment)
Note to other readers: There can be confusion about the word "firmware". Some people use it describe the Rom.
In this case, I'm referring to the hboot, boot and recovery images in a single special file called firmware.zip. I believe in some cases it can also include the radio software too.
If I ever get a chance to get this 100% tested and figured out, I'll post a step by step method.
At this point it's just a overview of what I tried, and looking for other members advice.
Unfortunately, as you can see from my posts, it didn't work 100% for me. It gave me the stock Rogers HTC One Rom/software with OTA updates, but the bootloader still had the tampered flag.
Check out ysl00's post above. He/She evidently had it working 100% without the tamper flag.
Not sure if Rogers has a 4.3 OTA yet, but that might fix the flag since it includes a firmware update along with the OS update.
Post back with your results !

Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!

figured it out.
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.

millarrjm said:
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
Click to expand...
Click to collapse
Sorry about that. No I didn't see it until just now. I guess thats the problem with having 20 browser tabs open at once. hehe
millarrjm said:
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
Click to expand...
Click to collapse
Good to hear. I read your post. I thought..."Is he using a root file manager ?" then read your next post….
I was also going to suggest a guaranteed way to determine where the CWM backups are being stored on a phone.
This way it doesn't matter which version of CWM, which phone or if the back directory exists yet.
Simply create a test backup and see where it goes. Then copy the Nandroid backup that you want to restore, there.

I should mention that I'm currently running my phone as a Developer Edition (Brightstar) 4.3 with OTAs, S-OFF, and unlocked.
It's works perfectly. Only the Carrier ID (CID) needed to be changed. The MID is the same.
I assume that a brightstar RUU will work on it now, even if the phone was locked and S-ON.
I have a few more things I want to tweak on it, then I'll likely make a backup and try restore it to stock rogers again so that I can create a clear how-to.
What's interesting, is that the Developer Edition OS seems to be the same as the Rogers Edition OS (without the rogers apps which can be uninstalled).
The only reason I think it might be a better choice is that the Dev Edition should get OTA updates earlier than the Rogers Edition.
I tried the custom Viper Rom 2.6.x but couldn't get an LTE connection. I suspect that was due to APN settings, but I didn't confirm that.
Anyone got the Viper Rom fully working on a Roger HTC M7 ?

Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?

Esposition said:
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Click to expand...
Click to collapse
The OTAs don't work with custom recovery. You need the factory recovery

I don't get updates

Hi my name is meraj. I have purchased HTC one through a local website in Dubai ( which they claim that they bought from UK ) . I have been using it since July and I didn't get any updates . All my friends got new 4.2 or 4.3. Version. But I am still running the same old 4.0... I didnt do any cracks or customization to my phone just using as it is since unboxing.. please help me how it could be normal and how can I get regular updates . It also gives some message in startup .
Please help.
Thanks
Sent from my HTC One using xda app-developers app

ahmadmeraj said:
Hi my name is meraj. I have purchased HTC one through a local website in Dubai ( which they claim that they bought from UK ) . I have been using it since July and I didn't get any updates . All my friends got new 4.2 or 4.3. Version. But I am still running the same old 4.0... I didnt do any cracks or customization to my phone just using as it is since unboxing.. please help me how it could be normal and how can I get regular updates . It also gives some message in startup .
Please help.
Thanks
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Seems like your phone is rooted do you don't receive any official updates. You can boot in boatloader and see if your phone is unlocked, shutdown your phone and start your phone by holding power and volume down button at the same time. See what it says there, probably "unlocked" and s-on or s-off. After that chose recovery and see which recovery you have.

Go to settings - About Phone - Software Info and post what it says.
The device you bought was not new. It was unlocked and had or has a custom recovery installed.
Sent from my HTC One using XDA Premium 4 mobile app

If I have stock ROM (restored from nandroid) and reflashed stock recovery, I won't get OTA updates if my phone is rooted?

ahmadmeraj said:
It also gives some message in startup .
Click to expand...
Click to collapse
It looks like it is a development model (not DEV edition), which should not be sold anyways.
You can root and flash custom ROM, but I highly doubt that you will receive updates for a development model.

Thanks for your reply..
Here is the picture of bootloader.( in the last, didnt know how to post here)
Can it be revert back . While in bootloader I saw couple of options of rebooting or to factory setting , wipe out n all.. will it be helpful .
Thank you

Thanks for your reply..
Here is the picture of bootloader.
Can it be revert back . While in bootloader I saw couple of options of rebooting or to factory setting , wipe out n all.. will it be helpful .
Thank you

hi thanks for the reply. i have posted the photo of bootloader as i cant post here in quick reply.. the recovery what it shows is team win recovery project v2.5.0.0

ahmadmeraj said:
hi thanks for the reply. i have posted the photo of bootloader as i cant post here in quick reply.. the recovery what it shows is team win recovery project v2.5.0.0
Click to expand...
Click to collapse
Well since your bootloader is already unlocked and you got the custom recovery, you can always flash the latest custom rom that has Android 4.2 or 4.3. Otherwise you can bring the phone back to stock if possible. They're how to guides on how to do that on XDA.

ahmadmeraj said:
hi thanks for the reply. i have posted the photo of bootloader as i cant post here in quick reply.. the recovery what it shows is team win recovery project v2.5.0.0
Click to expand...
Click to collapse
Well your bootloader is still 1.44, so you still have the option to get S-Off, which would allow you to remove TAMPERED, and also allow you to return completely back to stock using a RUU.
How familiar are you with all this? I would recommend reading some of the guides, but if you do want to get back completely to stock you'll probably need to S-Off.
Can you post "fastboot getvar all" (and remove your IMEI and serial number before posting).

No updates
thanks nkk and farang..
yes i have done few time changing stock and versions on my previous htc but please tell me after all this will it be like a regular phone and can get all updates and in future i dont need to change ( in short i wont be sticking to same rom )
thank you

ahmadmeraj said:
Thanks for your reply..
Here is the picture of bootloader.
Can it be revert back . While in bootloader I saw couple of options of rebooting or to factory setting , wipe out n all.. will it be helpful .
Thank you
Click to expand...
Click to collapse
Factory reset will just reset your current Rom. So you have two options, 1 flash an other rom, which is already 4.3 and learn what a custom Rom can do for you, welcome to xda or 2, you can revert to stock version by flashing the right RUU for your version, but you need s-off to do this. You should do this now your bootloader is still 1.44. Anyway whatever you gonna do, you will have some homework to do!

thanks nkk and farang..
yes i have done few time changing stock and versions on my previous htc but please tell me after all this will it be like a regular phone and can get all updates and in future i dont need to change ( in short i wont be sticking to same rom )
thank you
nkk could you please tell me how to check fastboot getvar. so i could do and post it here..

no updates on my phone
thanks nkk and farang..
yes i have done few time changing stock and versions on my previous htc but please tell me after all this will it be like a regular phone and can get all updates and in future i dont need to change ( in short i wont be sticking to same rom )
thank you
nkk could you please tell me how to check fastboot getvar. so i could do and post it here..

i just need to know how to check fastboot getvar as you asked in that post.. please tell me so i can check and post it there.
thank you
Click to expand...
Click to collapse
First you need to install the HTC drivers (http://d-h.st/4LL), and adb/fastboot sdk (http://d-h.st/ja1) credits to @vomer; please read through the first part of his guide: http://forum.xda-developers.com/showthread.php?t=2365506
Once you've installed HTC drivers, and unzipped adb sdk to C:\ADB, reboot your phone into bootloader -> FASTBOOT, connect your phone to the PC, FASTBOOT will change to say FASTBOOT USB.
On your PC: "CD C:\ADB" then type "fastboot getvar all" and post results back (remember to remove IMEI and serial number)

help me to get updates
hello guys.. thank you all for your help//
somehow manage to get these details about fastboot. . i am adding the picture.. i dont understand much but i have intuition that it might be asia ruu. please help me find one.. but one thing please if i go back to original stock then will i face the sim lock problem ( as i bought it in dubai and if the phone is from another country and by some other carrier on which only their sim works)? and main concern that if i will get all the regular updates launched by htc,
thank you

ahmadmeraj said:
hello guys.. thank you all for your help//
somehow manage to get these details about fastboot. . i am adding the picture.. i dont understand much but i have intuition that it might be asia ruu. please help me find one.. but one thing please if i go back to original stock then will i face the sim lock problem ( as i bought it in dubai and if the phone is from another country and by some other carrier on which only their sim works)? and main concern that if i will get all the regular updates launched by htc,
thank you
Click to expand...
Click to collapse
OK, that tells us you have a Vodaphone UK version, not Asia, not a problem.
Since you're still on 1.44 hboot, I would recommend to get S-Off, as you will not be able to do that later. Continue followoing vomer's guide: http://forum.xda-developers.com/showthread.php?t=2365506 and the original revone thread: http://forum.xda-developers.com/showthread.php?t=2314582
Do the S-Off, no need to SuperCID at this time.
Why S-Off you ask, it would allow you to run any RUU (upgrade & downgrade) for any country and/or carrier.
Regarding SIM Lock, is your phone tied to any specific carrier at the moment? I assume not, since I dont think you're on Vodaphone UK, so the phone is/should arleady by SIM-unlocked.
Continue and report back, so we proceed with the next steps.
PS: Press the thanks button if I helped

Stop running 2 threads for the same thing...
http://forum.xda-developers.com/showthread.php?t=2474242&page=2
I already replied to you in that one...although what nkk71 said above is correct

No updates
hello.. yes i got revone and i downloaded rom toolbox lite but when i opened it , it gave me a message 'we failed to obtain root access as stated in market description root access is required to use this app..." but still i press continue and while accessing data folder it was empty no temp or local folder ( where we copy revone file)
thanks

No updates
hey i found the thread and gained root access and have managed to s off and remove that tampered logo.. so now i will go on ans install the ruu as eddy suggested??
thank you so much

[Solved]Urgent help please!

It is solved! For the answer look at my post below
Hello guys,
phone HTC one M8 Harman Kardon Edition
Happens that in my urge to unlock my phone sim lock I firstly changed the MID to unlocked SIM Dev edition MID and CID to SuperCID, well that went great until I was dumb enough to try to flash a Dev edition RUU to the phone and then i lost my TWRP recovery and everything went haywire. cause now i try to flash Recovery through fastboot and it suceeds but the phone gets stuck in entering recovery, Im not able to flash a Sprint RUU for HK because 1. i havent found one and 2. it probably wont load because of the MID which is 0P6B1200 if im correct.
please help me either load the Custom recovery so i can have access to adb, or any other way to fix it.
thank you!!

if someone could please give me any ideas, or contact anyone who could help me, it would be greatly apreciated, i can pay up to 20 usd through paypal if anyone can help me!!!

Change your MID back to Sprint and run the Sprint HK RUU...should be good to go.

Nevermind.. As long as you see hboot menu and capable to select different options you are safe and in healthy state.. Even if you want to brk things.. You won't be able to brk.. Just flash twrp 2.8 again using fastboot commands.. You should back on track...

thank you but no
Sarvesh.huddedar said:
Nevermind.. As long as you see hboot menu and capable to select different options you are safe and in healthy state.. Even if you want to brk things.. You won't be able to brk.. Just flash twrp 2.8 again using fastboot commands.. You should back on track...
Click to expand...
Click to collapse
I dont know what is going on but i did that already, even trying the new recovery image, and it gets stuck in the Entering Recovery... step

"Fastboot erase cache" and make sure you are flashing the correct version of twrp(change the MID back to the original one, this is dangerous if there is hardware difference across the 2 MIDs)

Guys all off your help was greatly apreciated but there was something wrong
Ok guys so I was able to fix it.
Although it looked like it was easy to flash the twrp recovery, remember I ran the ATT RUU so the hboot was wrong according to the phone. This means it wouldnt flash the recovery correctly, however something strange happened when i tryed to entered recovery after flashing, it would connect to the computer. When that happened the only thing i thought was that twrp has adb interface, so i instantly checked devices and proceeded to change back the MID. Once that was through i flashed Android 4.4.2 Sprint RUU non HK since the HK was giving unlock issues, then, pasted the Modded HtcOMADM_SPCS.apk and did the
Su am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity
Then clicked on sim lock
(You must be rooted and check for the moded file in the sim unlock thread on the general section)
And now i was fully funcional and GSM unlocked outside US.
I proceeded then by flashing HK lollipop RUU and then i was back on track.

Hey
jseb14 said:
Ok guys so I was able to fix it.
Although it looked like it was easy to flash the twrp recovery, remember I ran the ATT RUU so the hboot was wrong according to the phone. This means it wouldnt flash the recovery correctly, however something strange happened when i tryed to entered recovery after flashing, it would connect to the computer. When that happened the only thing i thought was that twrp has adb interface, so i instantly checked devices and proceeded to change back the MID. Once that was through i flashed Android 4.4.2 Sprint RUU non HK since the HK was giving unlock issues, then, pasted the Modded HtcOMADM_SPCS.apk and did the
Su am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity
Then clicked on sim lock
(You must be rooted and check for the moded file in the sim unlock thread on the general section)
And now i was fully funcional and GSM unlocked outside US.
I proceeded then by flashing HK lollipop RUU and then i was back on track.
Click to expand...
Click to collapse
Where do you type the "su ...." command into?

Sprint HTC One stuck on logo, tried almost everything but to no avail

Hello,
I am new to xda forum and expecting a helping hand from fellow members, here's the scenario, I have a sprint htc one which was working fine a few days ago before i decided to act smart .
It was rooted when i purchased it so i thought of flashing a new custom rom into it.I tried flashing (HTC_One_-_MaximusHD_53.0.0) and this one (NuSenSeveN-LP-m7-Sprint_v4.02_050715) and ended up being stuck at green HTC logo, even though the physical buttons are performing their respective functions when pressed but the screen shows just the htc one logo and nothing else.
It is unlocked, tampered and s-on and i have twrp recovery on board, hboot 1.57.0000
WHAT I HAVE ALREADY TRIED AND FAILED:
1) tried rum runner to turn s-off because i though may b because of s-on the roms are not being flashed properly but it says adb device not found
2) tried flashing Bad_Boyz_Sprint_ONE_M7_Lollipop_v2.0 but stuck at handsfree activation, even though i deleted htcwizard.apk.
Now the bottom line is, I am unable to use my device and in desperate need of your help.
Please respond, awaiting to put my hand back on the device.
Thank You

Flashing MaximusHD_53.0.0 messed up your partitions (it's not Sprint compatible as far as I know) and NuSenSeveN you have to fastboot flash the kernel separately ( I had the same problem lol)
The easiest fix would be to run the latest RUU and start fresh, then only flash roms that are Sprint compatible.

Sloth said:
Flashing MaximusHD_53.0.0 messed up your partitions (it's not Sprint compatible as far as I know) and NuSenSeveN you have to fastboot flash the kernel separately ( I had the same problem lol)
The easiest fix would be to run the latest RUU and start fresh, then only flash roms that are Sprint compatible.
Click to expand...
Click to collapse
Hey thanks for the response, I am not tech geek so I have no idea how to flash the latest RUU can you please be more specific about how to perform the above mentioned process or can you have a chat on hangouts as I have altready added you on it.
Thanks alot

Try to flash ruu which could be found on other posts do u know how to boot into the bootloader?

problem solved
Update: thanks to @Sloth I have fixed the problem, if anyone out there who owns a sprint htc one and have messed up his phone by flashing an incompatible rom the way i did, first relock your bootloader if you are s-on and then simply download RUU file from htc official website, make sure its for sprint variant.
Once the bootloader is relocked simply run ruu.exe file that you have downloaded and you are done.
Note: if the ruu setup says that you phone is not connected or gets stuck, boot into recovery and perform factory, after that re-try running ruu.
Thanks Sloth, and thanks xda members

HTC Desire 510 64BIT - return to full stock

Hello everyone
I have some trouble with returning to full stock. Yesterday I thought that I totally bricked my phone. Today it's working on UK Version from one of thread searched in this forum. I have RUU file for my version (i think so). When I'm try to follow steps from tutorials, it ends with fail
Now I have philz recovery, and stock rom UK version.
I started RUU on XP and follow the steps, when I am chosing update it doesn't find my phone.
Maybe it's the case that I have S-ON?
I'm not expert in this area, so please be patient.
Many thanks in advance.

Barti1XL said:
Hello everyone
I have some trouble with returning to full stock. Yesterday I thought that I totally bricked my phone. Today it's working on UK Version from one of thread searched in this forum. I have RUU file for my version (i think so). When I'm try to follow steps from tutorials, it ends with fail
Now I have philz recovery, and stock rom UK version.
I started RUU on XP and follow the steps, when I am chosing update it doesn't find my phone.
Maybe it's the case that I have S-ON?
I'm not expert in this area, so please be patient.
Many thanks in advance.
Click to expand...
Click to collapse
Being s-on doesn't mean anything you can still fix and return a phone to stock and if you already have the phone up and running just find out what your carriers APN is and input that info and you'll be able to get back online and make calls, texts etc.. If you want to S-Off for more control then visit The Root Ninja Sunshine S-Off HTC Desire 510

MrMike2182 said:
Being s-on doesn't mean anything you can still fix and return a phone to stock and if you already have the phone up and running just find out what your carriers APN is and input that info and you'll be able to get back online and make calls, texts etc.. If you want to S-Off for more control then visit *** The Root Ninja Sunshine S-Off HTC Desire 510[/URL]
Click to expand...
Click to collapse
Hi there,
I'm online now, I can make calls etc. But I just want to know, it's possible to return to full stock (I mean recovery, kernel and rom).
I tried to use RUU, but i doesn't work.
When I'm in bootloader I see :
*** Software status : modified ***
*** UNLOCKED ***
*** Security warning ***
When I'm running RUU, I see only option to update software, but on my phone is UK version, and RUU which I use is EU version.
Regards

Barti1XL said:
Hi there,
I'm online now, I can make calls etc. But I just want to know, it's possible to return to full stock (I mean recovery, kernel and rom).
I tried to use RUU, but i doesn't work.
When I'm in bootloader I see :
*** Software status : modified ***
*** UNLOCKED ***
*** Security warning ***
When I'm running RUU, I see only option to update software, but on my phone is UK version, and RUU which I use is EU version.
Regards
Click to expand...
Click to collapse
The EU version I posted works for your phone however i'd keep your phone the way it is because you will have to lock the boot again and reinstall a stock recovery to run the RUU which I can't seem to find(the stock recovery) for your phone and without it you cannot run any RUU.

MrMike2182 said:
The EU version I posted works for your phone however i'd keep your phone the way it is because you will have to lock the boot again and reinstall a stock recovery to run the RUU which I can't seem to find(the stock recovery) for your phone and without it you cannot run any RUU.
Click to expand...
Click to collapse
Actually, I found stock recovery for EU version (on polish forum, btw I'm from Poland). But I don't want to put in there, before I test it. So, please verify my steps.
1. Relock the bootloader. After that I see information which I posted in my previous post.
fastboot oem lock
fastboot reboot-bootloader
2. Reboot to bootloader, flash stock recovery.
fastboot flash recovery [name of my stock recovery]
fastboot reboot bootloader
3. Reboot to bootloader, run RUU.
After that I should have stock software. If I made somewhere any mistake, please tell me. If it will be okay, I'll upload a recovery, so the others will been able to do the same thing.
Regards

Barti1XL said:
Actually, I found stock recovery for EU version (on polish forum, btw I'm from Poland). But I don't want to put in there, before I test it. So, please verify my steps.
1. Relock the bootloader. After that I see information which I posted in my previous post.
fastboot oem lock
fastboot reboot-bootloader
2. Reboot to bootloader, flash stock recovery.
fastboot flash recovery [name of my stock recovery]
fastboot reboot bootloader
3. Reboot to bootloader, run RUU.
After that I should have stock software. If I made somewhere any mistake, please tell me. If it will be okay, I'll upload a recovery, so the others will been able to do the same thing.
Regards
Click to expand...
Click to collapse
Correct.

MrMike2182 said:
Correct.
Click to expand...
Click to collapse
Hi there, it's me again.
I finally get into RUU, and start STOCKing but it stops at step 2/8 (updating software - 100%). I wait 10,20,30 minutes and nothing...
I don't have any idea what I can do. I run XP on VM Oracle, because on 8.1 I was unable to start RUU.
Could you have access to any backup for Philz recovery?
Regards

Barti1XL said:
Hi there, it's me again.
I finally get into RUU, and start STOCKing but it stops at step 2/8 (updating software - 100%). I wait 10,20,30 minutes and nothing...
I don't have any idea what I can do. I run XP on VM Oracle, because on 8.1 I was unable to start RUU.
Could you have access to any backup for Philz recovery?
Regards
Click to expand...
Click to collapse
It's most likely stuck because your stock recovery is either not the correct one, or installed incorrectly. The RUU is known to stop there when it detects that the recovery partition has been modified and doesn't have the stock one on there... I also have no idea where to get you a stock recovery.img... I'm sure there is one around the net somewhere, if you search for it.

What do you exactly mean? I try to extract recovery from rom.zip from RUU temp folder but archive is incorrect or something like that. Later I'm going to extract it using unruu on Ubuntu 15.10.
Regards