Related
Hi there -
I got a HTC One on EE in the UK. I took steps to flash it to Google Edition stock rom, but mobile internet is now dead. Everything else is fine.
Steps I took:
1) unlock bootloader using htcdev
2) installed TRWP recovery and rooted, installed SuperSU
3) obtained S-OFF using revone (but didn't set a CID after obtaining S-OFF)
3) flashed M7_UL_JB43_STOCK_UI_S_Google_WWE_3.06.1700.10 (Google Edition stock rom)
Everything went ok, now have Google Edition stock rom and it works... but my mobile Internet doesn't work. At all. I can make calls, get and send texts, but no internet.
Info:
Baseband Version: 4A.13.3231.27_10.31.1131.05L
Android Version: 4.3
Kernel: 3.4.10-ge22f38b [email protected] #1
Build number: JWR66V.H10
Info from my bootloader:
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-ORANG001
HBOOT-1.44.0000
RADIO-4A.13.3231.27
Under 'Status' I have:
Network: EE
Mobile network type: EDGE
Service status: In service
Mobile network state: Disconnected
Under Settings > Mobile Network, I have Data enabled ticked, and under Access Point Names I have my APNs configured correctly as per the EE documentation on their site.
Help... will massively appreciate any advice anyone can give me to fix.
Thanks
What does it say under *#*#4636#*#* > Phone Information > Set Preferred Network type.
It should say GSM/WCDMA/LTE auto I think. I have a CDMA, so I can't be sure what it's supposed to say.
sauprankul said:
What does it say under *#*#4636#*#* > Phone Information > Set Preferred Network type.
It should say GSM/WCDMA/LTE auto I think. I have a CDMA, so I can't be sure what it's supposed to say.
Click to expand...
Click to collapse
Says 'LTE/GSM auto (PRL)' which based on research sounds normal/correct... yet still no data. The same page says:
GPRS service: Disconnected
Network type: GSM
GSM Disconnects: ========== DATA ==========
Help, I'm at a total loss what could be failing....
martynk said:
Says 'LTE/GSM auto (PRL)' which based on research sounds normal/correct... yet still no data. The same page says:
GPRS service: Disconnected
Network type: GSM
GSM Disconnects: ========== DATA ==========
Help, I'm at a total loss what could be failing....
Click to expand...
Click to collapse
Decided to take the problem back to basics and rule out everything - put the SIM card in a Nexus 4... no Internet. Put the SIM card in an iPhone 5... no Internet. Rang EE... my Internet package had failed to update on the system. Rageface dot png. Thanks for your help!
Meanwhile - my CID says Orange (EE) yet I'm running the Google Edition rom... is this going to be a problem, or should I change the CID to 11111 etc? Can you change the CID at any time? thanks again
Hello,
I recently acquired from ebay a used Sprint HTC One M7 for cheap because the guy couldn't unlock it.
I followed all the tutorials and guides here, and got the phone unlocked, TWRP recovery and SuperSU flashed, S-OFF, and a custom rom (Viper) flashed on it successfully.
I am from France and my network operator is Free.fr. I used both the *#*#4636#*#* and the Mobile settings to enable GSM and the phone, SMS, and 3G data are all working properly.
However, my operator allows for 4G LTE as well and I would like to use it if possible, while retaining the use of the Phone itself (making calls, texts etc).
The way it works for Free.fr is that I have to login on their website, and enable 4G manually. The server will then check if my phone has 4G LTE compatibility and enable it if it does, but everytime I try it tells me my phone is not 4G ready.
Is there anyway to do this? A guide or tutorial out there perhaps?
edit: more info:
It seems I need 2600 MHz frequency for 4G to work with my operator, could it be that the Sprint version cannot handle this? Any solutions?
m2smoe said:
Hello,
I recently acquired from ebay a used Sprint HTC One M7 for cheap because the guy couldn't unlock it.
I followed all the tutorials and guides here, and got the phone unlocked, TWRP recovery and SuperSU flashed, S-OFF, and a custom rom (Viper) flashed on it successfully.
I am from France and my network operator is Free.fr. I used both the *#*#4636#*#* and the Mobile settings to enable GSM and the phone, SMS, and 3G data are all working properly.
However, my operator allows for 4G LTE as well and I would like to use it if possible, while retaining the use of the Phone itself (making calls, texts etc).
The way it works for Free.fr is that I have to login on their website, and enable 4G manually. The server will then check if my phone has 4G LTE compatibility and enable it if it does, but everytime I try it tells me my phone is not 4G ready.
Is there anyway to do this? A guide or tutorial out there perhaps?
edit: more info:
It seems I need 2600 MHz frequency for 4G to work with my operator, could it be that the Sprint version cannot handle this? Any solutions?
Click to expand...
Click to collapse
Yeah :/ the Sprint HTC One only supports the 1900MHz for LTE. There aren't any solutions afaik, unless you might want to do a hardware mod, and doing hardware mods on an One is near-impossible.. so you're out of luck.
StormyNight said:
Yeah :/ the Sprint HTC One only supports the 1900MHz for LTE. There aren't any solutions afaik, unless you might want to do a hardware mod, and doing hardware mods on an One is near-impossible.. so you're out of luck.
Click to expand...
Click to collapse
Ah well, that's alright, at the price I got it for it's still worth it even without 4G. Thanks for the reply!
m2smoe said:
Ah well, that's alright, at the price I got it for it's still worth it even without 4G. Thanks for the reply!
Click to expand...
Click to collapse
Hi, could you share your experience of sim unlock the device?
my phone is on 1.57 hboot. I s-off it and RUU to 1.19 firmware. Android 4.1.2. Then I install latest TWRP and Super SU 2.0
Then I download the "sprint htc one sim unlock helper" , select sim unlock.
phone reboot. select " GSM/WCDMA/LTE auto" in *#*#4636#*#*"
Now when I insert my AT&T sim card. it pop up to select carreir, I choose "AT&T", I also choose "GSMUMTS only" in network moode. Also set up ATT APN.
now iin Phone indentity, I could see my phone number,
But there is no signal for the phone at all...
Could you told me your way of doing the sim unlock? Thanks.
laofan said:
Hi, could you share your experience of sim unlock the device?
my phone is on 1.57 hboot. I s-off it and RUU to 1.19 firmware. Android 4.1.2. Then I install latest TWRP and Super SU 2.0
Then I download the "sprint htc one sim unlock helper" , select sim unlock.
phone reboot. select " GSM/WCDMA/LTE auto" in *#*#4636#*#*"
Now when I insert my AT&T sim card. it pop up to select carreir, I choose "AT&T", I also choose "GSMUMTS only" in network moode. Also set up ATT APN.
now iin Phone indentity, I could see my phone number,
But there is no signal for the phone at all...
Could you told me your way of doing the sim unlock? Thanks.
Click to expand...
Click to collapse
I did exactly what you did and I had signal. I am from France so I don't know about AT&T though. With my French operator it works fine now.
m2smoe said:
I did exactly what you did and I had signal. I am from France so I don't know about AT&T though. With my French operator it works fine now.
Click to expand...
Click to collapse
That is weired. thanks for your reply though.
Hi I've bought unlocked htc one and I don't know from which carrier it was. Im having network problem. I'm from India I don't have lte network.
sometime ONE doesn't switch network from 3g to 2g and get stuck at "no service" in network setting I've already set wcdma/gsm network.
But problem still there. so what should I do???
should I manually flash firmware for htc one so it can work better on indian carrier??
model m7_ul
firmware 5.12.708.3
baseband 4T.27.3218.14
Hello,
I'm about to buy an AT&T version of the HTC One to use on T-Mobile, the reason being is that that AT&T version supports the newer 1900 MHz LTE that T-Mobile is using in my area while the T-Mobile version of the phone doesn't. If I flash the T-Mobile RUU will that disable the 1900 MHz support? Sorry if this is a stupid question; I'd just like the T-Mobile firmware so I have WiFi calling, etc.
DeanWin said:
Hello,
I'm about to buy an AT&T version of the HTC One to use on T-Mobile, the reason being is that that AT&T version supports the newer 1900 MHz LTE that T-Mobile is using in my area while the T-Mobile version of the phone doesn't. If I flash the T-Mobile RUU will that disable the 1900 MHz support? Sorry if this is a stupid question; I'd just like the T-Mobile firmware so I have WiFi calling, etc.
Click to expand...
Click to collapse
Nobody knows? Everything I've read says flashing the RUU would be safe, I just don't know about the radio part if it will disable the 1900 MHz LTE support.
DeanWin said:
Nobody knows?
Click to expand...
Click to collapse
it's not a simple question.
anyway asking this to HTC directly(htc support) would hep you
cemadamgibiadam said:
it's not a simple question.
anyway asking this to HTC directly(htc support) would hep you
Click to expand...
Click to collapse
I'm pretty sure their answer would be flashing a T-Mobile RUU over a AT&T phone is an unsupported operation and will void your warranty. I guess I'll have to be the guinea pig
I won't have the phone until early next week probably, I'll post back what happens.
DeanWin said:
I'm pretty sure their answer would be flashing a T-Mobile RUU over a AT&T phone is an unsupported operation and will void your warranty. I guess I'll have to be the guinea pig
I won't have the phone until early next week probably, I'll post back what happens.
Click to expand...
Click to collapse
yeah most of them don't know sh!t. you can find someone who could help you out tho
i'll be following this thread
DeanWin said:
I'm pretty sure their answer would be flashing a T-Mobile RUU over a AT&T phone is an unsupported operation and will void your warranty. I guess I'll have to be the guinea pig
I won't have the phone until early next week probably, I'll post back what happens.
Click to expand...
Click to collapse
read this, same question, same answer http://forum.xda-developers.com/htc-one/help/t-mobile-lollipop-ruu-error-155-t3053962
Got the phone, and it works perfectly
Here are the steps I took for anyone in the future who wants to use an AT&T HTC One in a T-Mobile area that has 1900 MHz / Band 2 LTE:
1. Unlock and S-OFF bootloader.
2. Change CID and MID for T-Mobile (TWRP and use MID Changer 1.01 or SuperSU + there is an echo/dd command.)
3. Flash hboot 1.57 <- Very important, earlier versions don't support the encrypted rom.zip that the T-Mobile Lollipop RUU uses. Save yourself hours of debugging and hassle like I did until I figured this out (Google was useless for this.)
4. Run the T-Mobile Lollipup RUU (or whichever version you want.)
What CID and MID? Is it just SuperCID and PN0713000? I have SuperCID (11111111) but my MID is PN07120000. Currently on hboot 1.61, radio 4T.35.3218.16. I want to get the T-Mobile RUU so I can get better reception (my dad gets one or two bars where I am, I get none), but I obviously don't want to brick my phone.
Edit: I'm running the RUU without having changed anything. I am S-OFF. It seems like it's working just fine, it went through "checking CID/MID" without a problem and is going through the process without a hitch as yet. I'll update once it's done.
Edit2: SUCCESS
Jonathan_A said:
What CID and MID? Is it just SuperCID and PN0713000? I have SuperCID (11111111) but my MID is PN07120000. Currently on hboot 1.61, radio 4T.35.3218.16. I want to get the T-Mobile RUU so I can get better reception (my dad gets one or two bars where I am, I get none), but I obviously don't want to brick my phone.
Edit: I'm running the RUU without having changed anything. I am S-OFF. It seems like it's working just fine, it went through "checking CID/MID" without a problem and is going through the process without a hitch as yet. I'll update once it's done.
Edit2: SUCCESS
Click to expand...
Click to collapse
Sounds like you got it already but T-Mobile's CID is T-MOB010
DeanWin said:
Sounds like you got it already but T-Mobile's CID is T-MOB010
Click to expand...
Click to collapse
Will changing the CID have any effect? It's not hard since I'm S-OFF but I'm just wondering. I'm still not getting a signal (for reference, my dad's phone is an HTC One X, AT&T variant, mine is an HTC One M7 from AT&T, m7_ul).
Jonathan_A said:
Will changing the CID have any effect? It's not hard since I'm S-OFF but I'm just wondering. I'm still not getting a signal (for reference, my dad's phone is an HTC One X, AT&T variant, mine is an HTC One M7 from AT&T, m7_ul).
Click to expand...
Click to collapse
I doubt it, the One X may just have a better radio.
Jonathan_A said:
Will changing the CID have any effect? It's not hard since I'm S-OFF but I'm just wondering. I'm still not getting a signal (for reference, my dad's phone is an HTC One X, AT&T variant, mine is an HTC One M7 from AT&T, m7_ul).
Click to expand...
Click to collapse
check your APN settings, and so you know you may be limited to just edge data service with t-mobile on the at&t htc one .. your missing the 1700 band that t-mobile uses in most of the country
Well, it seems like all the places I get 4G LTE are on AWS. According to the coverage map I should be blanketed in Band 2 LTE but I've never seen it connect.
Back to the old drawing board... I've seen some stuff about editing NV variables but none of the software seems to work; says it writes the variables but they don't stick.
DeanWin said:
Well, it seems like all the places I get 4G LTE are on AWS. According to the coverage map I should be blanketed in Band 2 LTE but I've never seen it connect.
Back to the old drawing board... I've seen some stuff about editing NV variables but none of the software seems to work; says it writes the variables but they don't stick.
Click to expand...
Click to collapse
Yeah the AT&T phone does not have the 1700 AWS Band radio so no amount of software / firmware flashing will help.
From the AT&T Website
Wireless Technology
4G-LTE
Bands 2, 4, 5 and 17
4G
HSPA+ with enhanced backhaul
UMTS/HSPA+
850/1900/2100MHz
GSM/GPRS/EDGE
850/900/1800/1900MHz
Click to expand...
Click to collapse
clsA said:
Yeah the AT&T phone does not have the 1700 AWS Band radio so no amount of software / firmware flashing will help.
Click to expand...
Click to collapse
You've got it kind of backwards
I'm trying to enable the 1900 MHz band, the 1700 AWS band is working already (LTE Band 4 is 1700 AWS in the specs you copy/pasted)
I flashed the Developer Edition RUU and still nada on 1900 MHz. At this point I'm not sure if the phone just doesn't support it even though it says it should or if T-Mobile's map is way off or they've updated it before actually deploying 1900 MHz LTE.
DeanWin said:
Got the phone, and it works perfectly
Here are the steps I took for anyone in the future who wants to use an AT&T HTC One in a T-Mobile area that has 1900 MHz / Band 2 LTE:
1. Unlock and S-OFF bootloader.
2. Change CID and MID for T-Mobile (TWRP and use MID Changer 1.01 or SuperSU + there is an echo/dd command.)
3. Flash hboot 1.57 <- Very important, earlier versions don't support the encrypted rom.zip that the T-Mobile Lollipop RUU uses. Save yourself hours of debugging and hassle like I did until I figured this out (Google was useless for this.)
4. Run the T-Mobile Lollipup RUU (or whichever version you want.)
Click to expand...
Click to collapse
When you ran the T-Mobile RRU, did it change your hboot version from 1.57 to something else?
Jyro275 said:
When you ran the T-Mobile RRU, did it change your hboot version from 1.57 to something else?
Click to expand...
Click to collapse
It flashed HBOOT 1.61.000. I'm actually back on the T-Mobile RUU now since it has WiFi calling and everything.
I have HTC M8 831c, phone is S-Off and Super CID 11111111, While checking for radio bands by dialing the code *#*#4636#*#* I accidentally clicked the radio bands option and selected USA Band, now the phone is stuck in USA bands and I cannot revert back to the global bands. Please help me how to make it working again. Here are the details
M8_WHL PVT SHIP S-OFF
CID-11111111
HBOOT- 3.19.0.0000
Radio-1.09.20.0209
OpenDSP-v48.2.2-00564-M8974_F0.1211
OS-4.25.651.18
Aug 4 2015,19:05:23.90022323
Problem: No service
Solutions Tried: Factory resetting didn't work
Please help
Engr_Junaid said:
I have HTC M8 831c, phone is S-Off and Super CID 11111111, While checking for radio bands by dialing the code *#*#4636#*#* I accidentally clicked the radio bands option and selected USA Band, now the phone is stuck in USA bands and I cannot revert back to the global bands. Please help me how to make it working again. Here are the details
M8_WHL PVT SHIP S-OFF
CID-11111111
HBOOT- 3.19.0.0000
Radio-1.09.20.0209
OpenDSP-v48.2.2-00564-M8974_F0.1211
OS-4.25.651.18
Aug 4 2015,19:05:23.90022323
Problem: No service
Solutions Tried: Factory resetting didn't work
Click to expand...
Click to collapse
Anyone please help, i want to get my phone working again
You can't select "Automatic" in those exact settings?
No
mcwups1 said:
You can't select "Automatic" in those exact settings?
Click to expand...
Click to collapse
There is no Automatic option available, there are only four options which shows USA Band, 1900 Band, 850 band etc...
I'm unable to revert back to the automatic option. I have tried selecting all the four options but non of them works. I'm unable to get network on my phone. Please help me
Still stuck
Engr_Junaid said:
There is no Automatic option available, there are only four options which shows USA Band, 1900 Band, 850 band etc...
I'm unable to revert back to the automatic option. I have tried selecting all the four options but non of them works. I'm unable to get network on my phone. Please help me
Click to expand...
Click to collapse
Is there any custom Rom for HTC M8 sprint which has the option to choose Automatic radio bands? Please anyone share any solution.
Here i found this thread, that guy was able to solve the issue, but he didn't share the solution.
https://forum.xda-developers.com/showthread.php?t=2788803
Engr_Junaid said:
Is there any custom Rom for HTC M8 sprint which has the option to choose Automatic radio bands? Please anyone share any solution.
Here i found this thread, that guy was able to solve the issue, but he didn't share the solution.
https://forum.xda-developers.com/showthread.php?t=2788803
Click to expand...
Click to collapse
Flashing RUU will slove your problem as it have stock radio settings .
I was having same problem in sprint m8 .
The process i follow
Flash sprint RUU.
Go to DIAG MODE
connect phone to dfs .
Enable all 3g bands .
Sent from my XT1526 using Tapatalk
Thank you for your reply, Please if you can share more detailed instructions
sonnu0100 said:
Flashing RUU will slove your problem as it have stock radio settings .
I was having same problem in sprint m8 .
The process i follow
Flash sprint RUU.
Go to DIAG MODE
connect phone to dfs .
Enable all 3g bands .
Sent from my XT1526 using Tapatalk
Click to expand...
Click to collapse
I have flashed the stock RUU, please provide more details about dfs and how to enable all 3g bands? I'm looking forward to you.
Try this!
1) Put your phone in LTE/CDMA network mode
2) Dial ##786#. It will open the EPST menu.
3) Select Edit mode and put 000000as the MSL/password.
4) from the Options menu, select reset settings.
please note that this will also factory reset your phone as well as the radio settings and you should be able to get the signal after restarting and putting the phone in GSM/UMTS mode again (if not already).
To enable all 3G bands, follow this post:
https://forum.xda-developers.com/sprint-htc-one-m8/general/enabling-3g-umts-countries-t2847461