So, after I installed Cloudyg2 3.3, I have been getting the android.process.phone has stopped pop up, without even using the phone. Keeps popping up over and over and over. I went into build.prop and made sure ro.product.name=g2_vzw and ro.build.target_operator=vzw are in smaller case.
It seems that this problem has something to do with data connection, which i had none.
I put my phone on roaming and the pop ups stopped.
So I went to sleep, and in the morning, I get the same pop up!!! I click okay and it pops up immediately!!! Over and over.
Then I go and clear cache of the phone apps and reset app preferences as well. reboot. More pop ups.
After that I reboot into twrp and do a factory reset. No luck! Same vicious circle.
Somebody PLEASE HELP!
Wipe data cache dalvik and system. Reflash rom. Wipe data again reboot
So I figured it out. I missed flashing the kk boot loader b4 I flashed cloudyg2 3.3. I went and wiped everything and flashed kk boot loader first. Then cloudy and Ayala, no more pop ups. I thought since I was on 5.0.2 already that I didn't need kk boot loader. But I was wrong. Totally stoked now!!!
Good im glad you fixed it.
Related
Hi guys I wanted to go ahead and reload a different ROM. I had purehero 2.1 MOC (maps-oced) but I heard that the nonclocked version has better stability with wi-fi. I went ahead and tried to downgrade the rom without wiping and everything booted up fine. However wi-fi tethering was still not working I kept getting an error about unable to start wifi tethering etc. I went ahead and tried many roms (pure hero/alysious) all that wouldn't require wipe. I still kept getting same error. I went ahead and went to recovery I did a factory wipe/loaded rom and it just stays on the nexus X cross as if it's trying to boot but it doesn't it just keeps recyling over and over again. I went back to recovery and wiped data/factory and also dalvik cache ( i have a2sd enabled) then retried loading rom and same thing. I'm at the moment of wiping all mentioned plus eXt2 and reloading rom AGAIn. I hope this time it boots up.
Will something in my SD card possibly have my phone acting up the way it is? If so what solutions do u guys suggest? I hope after doing the last step I mentioned I can FINALLY log into my phone. At the moment i'm unable to do so. My aim name is crown510. If any of u can assist me I would appreciate it. Thank you!
I had my phone randomly soft brick today and I was wondering if someone might be able to shed some light on what happened to me.
So, my phone is a Samsung Galaxy S GT-I9000M on Bell Canada. Rooted, ADW, Clockword Recovery, *No* Lagfix (I removed it), GPS Update. Today I went to open an app and the phone froze and subsequently rebooted. Upon restart the boot animation displayed for a while and then went to a black screen. Phone did not respond to any input. Force restarting led to the same effect. Tried a battery pull, no dice. Wiped the cache partition, no dice. Booted into recovery then clockwork recovery. Restored to my last nandroid backup. Phone restarted, displayed boot animation for a long time then went to the black screen and accepted no input. Restored to my nandroid before that, no luck. Wiped dalvik cache, no luck. Connected the usb, booted into recovery, opened android commander, and pulled down a copy of everything on the internal sd card. Finally, while walking to the Bell Canada store to get a replacement, I did a factory reset... The phone booted.
So what has me extremely curious is what did a factory reset do, that restoring from a nandroid backup didn't? And what the hell happened to the phone that an app crash trigged a quasi soft brick. Let me know if anyone has any ideas.
Thanks!
I had the same thing happen to me all the time on the XXJPC TOM after having installed the TaskManager update (it was 1.4 back then) from Samsung Apps. Everything seemed fine until I rebooted. After the boot animation played, there was the "I'm crashing" vibration (vibrating once, then three times shorty after) at which point the phone went off. I had this happen four times in a row before I figured out (by accident) that it's the TaskManager update that did this to me. Only a factory reset could revive the phone. Did you, by any chance, install the TaskManager update, too, on a Froyo ROM?
Hope this helps a bit. It was rather frustrating to me.
I'm just running a rooted stock i9000 rom (android 2.1). No task manager update.
I did manage to recover. The process ended up being this:
Backup data on internal sd card while in recovery mode
Factory reset
Wipe cache partition
Boot
Install rom manger
Copy data back to internal sd card
Restore from most recent nandroid backup
The only thing I can think of is somehow I suffered a corruption of my data partition, so the factory reset fixed it by wiping the partition. Not sure if that's a possible explanation.
Sent from my GT-I9000M using XDA App
Hello...so..now i don't really know what to do. I had Django rom, 1.7.1 and a few days ago, it got glitchy, apps stopped to respond. So i wanted another rom, and..by a noob mistake i did it with rom manager, downloaded directly Eagle's blood ICS. it started and all that. but i didn't stopped there...when i got home i wanted back that Django ROM...i wiped everything and installed it..but when i rebooted the phone, it started with Eagles Blood loader and..when it starts..it gives me this"Encrytion unsuccessful. Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using yoour phone, you must perform a factory reset. When you set up your phone after the reset, you'll have an oportunity to restore any data that was backed up to your Google Account." And gives me an "Reset phone" button. i pressed it and it gets me back to the same message after it loads up. What to do?
Mitzu' said:
Hello...so..now i don't really know what to do. I had Django rom, 1.7.1 and a few days ago, it got glitchy, apps stopped to respond. So i wanted another rom, and..by a noob mistake i did it with rom manager, downloaded directly Eagle's blood ICS. it started and all that. but i didn't stopped there...when i got home i wanted back that Django ROM...i wiped everything and installed it..but when i rebooted the phone, it started with Eagles Blood loader and..when it starts..it gives me this"Encrytion unsuccessful. Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using yoour phone, you must perform a factory reset. When you set up your phone after the reset, you'll have an oportunity to restore any data that was backed up to your Google Account." And gives me an "Reset phone" button. i pressed it and it gets me back to the same message after it loads up. What to do?
Click to expand...
Click to collapse
try to nvflash an ICS clean ROM or GB ROM.....
check for Stefan's Homero's or Topo's clean nvflash ROM....everything will be fixed for you mate
dont worry....but backup your data....or just install clean from store....thats it
Hope it helps
Ok so I'm pretty sure my phone is done for, but I thought I'd see if anyone knew a solution before I go buy a new phone
Yesterday I dropped my phone (which was running Slimbean), but I popped the battery back in and it worked fine. Then about three hours later, it randomly shut off while I was using it, then started going into a bootloop. Occasionally it will start up all the way, but I'm lucky if its on for 10 minutes before turns back off and starts bootlooping again. I got it to boot into CWM, (the first time it shut off while I was in CWM) and wiped everything and reflashed Slimbeam, but it didn't change anything. Any ideas?
Go back in and do wipes on everything but external drive reflash wipe cache + dalvik cache + fix permissions then boot. Let sit 10 minutes before doing g any setup with Google or phone. This allows all drivers to load and configure prior to having more data to configure.
Sent from my CM10 Linero Odexed Powered by Evil
I recently started to use ViperOne 6.1.0 on my HTC One, with S-Off. After setting all the tweaks, everything goes fine, except for when I reboot my phone, it stays in the boot screen. I have reset my phone, reflashed the rom with and without wiping the phone. When I do wipe, I can reset everything and go into the phone. But when I reflash without wiping, the phone boots, goes through the upgrading apps screen. When it is all done, it goes back to the boot screen and just sits there. HELP!
EDIT: I wiped, and flashed rom fine. I restarted the phone fine, but as soon as I restored using Titanium Backup, the phone will not reboot right. The problem does not happen on other roms, such as Android Revolution 62.0. I really want to use ViperOne, but I also want all of my data. Can somebody please help? I have not tried to flash a custom kernel yet.
FIXED: It seems as if upon reboot, the viperone sidebar was crashing somehow. Once disabled, everything has been running smoothly.
Mickey Meyers said:
I recently started to use ViperOne 6.1.0 on my HTC One, with S-Off. After setting all the tweaks, everything goes fine, except for when I reboot my phone, it stays in the boot screen. I have reset my phone, reflashed the rom with and without wiping the phone. When I do wipe, I can reset everything and go into the phone. But when I reflash without wiping, the phone boots, goes through the upgrading apps screen. When it is all done, it goes back to the boot screen and just sits there. HELP!
EDIT: I wiped, and flashed rom fine. I restarted the phone fine, but as soon as I restored using Titanium Backup, the phone will not reboot right. The problem does not happen on other roms, such as Android Revolution 62.0. I really want to use ViperOne, but I also want all of my data. Can somebody please help? I have not tried to flash a custom kernel yet.
FIXED: It seems as if upon reboot, the viperone sidebar was crashing somehow. Once disabled, everything has been running smoothly.
Click to expand...
Click to collapse
trying to do the wipe cache & dalvik