Related
This topic is for development of the Wifi apk for the vibrant. Please DO NOT discuss what wifi means to you or how excited you are about it. I am posting this in hopes that a developer can make this work.
Only comment here if you can contribute and make this work. (what i have provided is the extent of my knowledge)
The apk installs, loads, but will not connect. It gets stuck on 'enabling' and shreads the battery trying.
Perhaps the servers are just not up yet since this is so new..
UPDATE: According to TMo News, T-mobile has stated that they do not support wifi calling yet... so hopefully this app not working is just a result of no server support yet..
MS-HTCVISION-KNT20-02.apk
motorjonny said:
This topic is for development of the Wifi apk for the vibrant. Please DO NOT discuss what wifi means to you or how excited you are about it. I am posting this in hopes that a developer can make this work.
Only comment here if you can contribute and make this work. (what i have provided is the extent of my knowledge)
The apk installs, loads, but will not connect. It gets stuck on 'enabling' and shreads the battery trying.
Perhaps the servers are just not up yet since this is so new..
MS-HTCVISION-KNT20-02.apk
Click to expand...
Click to collapse
Took a look at it and so far its either missing a VPN module or its pointing at settings that we dont have. Right now its looping trying to connect to localhost.
This does ADB install fine, but it doesnt connect if you disable it and try to re-enable it.
Side effect, it was constantly looping trying to connect the service and wasnt very happy about uninstalling when I tried, wouldnt recommend anyone install it unless they have the settings or an idea where we can grab them from
Soon as I get the OTA ill scour for the settings. Soon as I have any updates to it ill tweet/post
Thanks Viral, scepterr says it needs a kernel module and we need source code for that
Why ADB...just hit install...running it on Froyo, I cant tell if its working or not because Tmobile DID fix my signal at my house LOL
laristech said:
Why ADB...just hit install...running it on Froyo, I cant tell if its working or not because Tmobile DID fix my signal at my house LOL
Click to expand...
Click to collapse
You can still make calls and it will say its working but if you turn it off and back on, itll eternally sit at attempting to make connection.
motorjonny said:
Thanks Viral, scepterr says it needs a kernel module and we need source code for that
Click to expand...
Click to collapse
HTC is better about source code, maybe well get lucky and have that released quick and can patch that in *pokes JAC just in case*
It's using all of my CPU.
Interesting that it works after being pushed initially. Is there a way to freeze it in that state, without restarting it?
tengtengvn said:
It's using all of my CPU.
Click to expand...
Click to collapse
Pardon the off-topicness, but which app are you using in that SS?
lotherius said:
Pardon the off-topicness, but which app are you using in that SS?
Click to expand...
Click to collapse
The app he is using is called SystemPanel. It's very useful.
I suggest removing this app in the mean time. Its a CPU hog and 50% of my battery use.
--
Sent from my Vibrant via XDA app
According to TMO News, the wifi calling is not supported yet as stated by T-Mobile.
“Wi-Fi Calling and tethering Wi-Fi sharing are not currently supported on the T-Mobile G2. T-Mobile knows these features are important to consumers and we’re working to deliver them to G2 users in the future. We have nothing further to announce at this time.”
http://tinyurl.com/3yltw9a
This was one of my theories... that would be an easy and good answer for why it will not connect yet...
Looks like theres no luck on the g2 end either, its still missing some configuration or something.
http://forum.xda-developers.com/showthread.php?t=807116
http://forum.xda-developers.com/showthread.php?t=799004
Adding to think tank section of the bible for easy retrieval just in case the thread slows.
Something tells me TMo is going to wait, either for the release of the MyTouch HD or they'll release it on a bunch of phones all at once as a way to boost sales before Christmas.
Looks like G2 will have this app soon enough. I can't wait to have it on the vibrant.
http://www.tmonews.com/2010/11/t-mobile-g2-to-get-wi-fi-calling-update-starting-tomorrow/
The reason why this app isn't working is because you need a Wifi calling plan which tmobile is rolling out soon and it requires a data plan of 19.99 or higher which pretty much everyone has because the 200 mb plan has not rolled out yet.
Has anyone gotten the wifi calling G2 OTA update yet? Can you let us know if the wifi calling now works on the G2? Thanks.
Yes and it works awesome!
Pacothebandit said:
Yes and it works awesome!
Click to expand...
Click to collapse
Thanks. So it looks like both now the G2 and myTouch 4G are up and running with wifi calling. They both have in common that they are running 2.2. So am I to assume that the apk app on both of them is the same and that it will also run on the Vibrant once it gets the 2.2 update?
larryvand said:
Thanks. So it looks like both now the G2 and myTouch 4G are up and running with wifi calling. They both have in common that they are running 2.2. So am I to assume that the apk app on both of them is the same and that it will also run on the Vibrant once it gets the 2.2 update?
Click to expand...
Click to collapse
Or someone with a vibrant that has 2.2 could test it
I wondering if the Tether Hack using the RadioComm will work on the Droid4. I tried it, but could not get the app to detect the phone.
Also I enabled Verizon's Tether, and it seems to be giving me tether at no extra cost, I'm not sure, but the message when I activated it said, as long as you have a data play $29.95 or greater. Other wise you had to upgrade planes. Well I had the unlimited data plane so I continued with the set up, then when to Verizon to check my bill, and I don't see any additional cost as of yet. So I'm curious, is version charging to use Tether ?
Yahya
When I looked into it, the cost was supposed to be $24/mo for tethering. I just rooted mine and installed the Wifi Tether 3.1 beta 11 apk and it works fine so I would not chance attempting to use Verizon's app just because it seems likely that even if you don't get charged right off the bat, they might get wise and decide to charge you in the future.
Foxfi in the market works perfectly on D4. No root required
zombie673 said:
I just rooted mine and installed the Wifi Tether 3.1 beta 11 apk and it works fine
Click to expand...
Click to collapse
Same here.
Hey guys, trying to get my , Droid 4 to tether, we rooted and downloaded wifi tether 3.1 beta 6, gave SU permissions and tried to tether but can not find the network from my phone, Wyatt settings are you using for profile, rooting fix, etc
zombie673 said:
I just rooted mine and installed the Wifi Tether 3.1 beta 11 apk and it works fine
Click to expand...
Click to collapse
Code3VW said:
Same here.
Click to expand...
Click to collapse
x3, except I get the Verizon "Tethering or hotspot active" notification. I haven't gotten a warning or paywall screen and my bill hasn't changed so hopefully that isn't cause for concern.
SGMD1 said:
x3, except I get the Verizon "Tethering or hotspot active" notification. I haven't gotten a warning or paywall screen and my bill hasn't changed so hopefully that isn't cause for concern.
Click to expand...
Click to collapse
"That behavior it does is normal. The stock app is just a modified version of the aosp built in tethering mechanism. So when AWT sets the prop that tells the system that tethering is on the stock app gets triggered. Even cm7 on thrill does this."
This quote is from tekahuna (a developer of android wifi tether) on gtalk.
I asked him the same question.
Sent from my DROID4 using XDA App
phrir1 said:
"That behavior it does is normal. The stock app is just a modified version of the aosp built in tethering mechanism. So when AWT sets the prop that tells the system that tethering is on the stock app gets triggered. Even cm7 on thrill does this."
This quote is from tekahuna (a developer of android wifi tether) on gtalk.
I asked him the same question.
Click to expand...
Click to collapse
Sweet! Thanks for asking him. That's a big relief.
Yeah, the mobile hotspot pops up for everyone (but not always which is odd)... it will not affect your bill because VZW can't say anything if you're not using their app.
The settings that I'm using on 3.1 beta11 are as follows:
Device - Motorola Razr
Setup - Auto
Not using encryption and everything else is however it comes set.
Part of your problem is probably that you're using an older beta. Here's the link for the one I'm using (just add the Http:// because I haven't posted enough to link):
code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_1-beta11.apk&can=2&q=
Wifi Tether 3.1 here. First thing installed post-root. Working beautifully.
Using the built in tether with the entitlement_check hack from bionic, working great
so is it free or what
My wife has the Droid 4 and I love the 4g service (up to 20mbps in my area). We use the wifi tether for our xoom. So if we use the vzw stock wifi tether app we will be charged? And if I use a 3rd party app like fox fi for instance it will b free of charge? Or can we edit the radio with Radiocom like the d3? I have my d3 changed over. And would it help if we rooted the d4?
wif tether
zombie673 said:
When I looked into it, the cost was supposed to be $24/mo for tethering. I just rooted mine and installed the Wifi Tether 3.1 beta 11 apk and it works fine so I would not chance attempting to use Verizon's app just because it seems likely that even if you don't get charged right off the bat, they might get wise and decide to charge you in the future.
Click to expand...
Click to collapse
can you link wifi tether 3.1 apk? i only have 2.11 .. plz thank you
svrnmnd said:
can you link wifi tether 3.1 apk? i only have 2.11 .. plz thank you
Click to expand...
Click to collapse
http://code.google.com/p/android-wifi-tether/downloads/detail?name=wifi_tether_v3_1-beta11.apk
jkcsho said:
Or can we edit the radio with Radiocom like the d3? I have my d3 changed over. And would it help if we rooted the d4?
Click to expand...
Click to collapse
I wanted to do it this way to. I had it working for DROID3. Tried it on the DROID4, but could not detect it in Radiocom.
Sent from my DROID4 using xda premium
zombie673 said:
When I looked into it, the cost was supposed to be $24/mo for tethering. I just rooted mine and installed the Wifi Tether 3.1 beta 11 apk and it works fine so I would not chance attempting to use Verizon's app just because it seems likely that even if you don't get charged right off the bat, they might get wise and decide to charge you in the
Click to expand...
Click to collapse
They are charging, i'm going to cancel, they do pro rate though. Will try to figute out Radiocom or use the app
Sent from my DROID4 using xda premium
YahyaIsrael said:
They are charging, i'm going to cancel, they do pro rate though.
Click to expand...
Click to collapse
Wait, what? They added tethering to your plan without any warning?
SGMD1 said:
Wait, what? They added tethering to your plan without any warning?
Click to expand...
Click to collapse
You can say that or you could say they warned me not. The pop up warning said you can not use WiFi tethering unless you have a $29.95 data plan or greater. Well I have that plan for unlimited data. So I thought I was good.what they mean is in conjunction with there will be a $30 teather charge.
I pressed continue thinking I was good because of my data plan.
Sent from my DROID4 using xda premium
YahyaIsrael said:
You can say that or you could say they warned me not. The pop up warning said you can not use WiFi tethering unless you have a $29.95 data plan or greater. Well I have that plan for unlimited data. So I thought I was good.what they mean is in conjunction with there will be a $30 teather charge.
I pressed continue thinking I was good because of my data plan.
Click to expand...
Click to collapse
I've never seen this message, and I just logged into my account and it shows no usage for Connect/Hot Spot. It does show usage for Data, but it doesn't separate tether from phone data usage.
Sweet. The only roadblock to getting this phone was making sure I could tether
looking to install a ics rom on the droid 3
i am using gsm version bell xt 860.
it wont run as soon as i tried to install patch by willis for 3g
http://forum.xda-developers.com/showthread.php?t=1377146
so basically i need to know does droid 3 in canada the xt 860 work with ics roms being developed or not ?
naifs_br10 said:
looking to install a ics rom on the droid 3
i am using gsm version bell xt 860.
it wont run as soon as i tried to install patch by willis for 3g
http://forum.xda-developers.com/showthread.php?t=1377146
so basically i need to know does droid 3 in canada the xt 860 work with ics roms being developed or not ?
Click to expand...
Click to collapse
from my XT860 personal experience NONE of the CM9's rom's (i tried them all) is fitting to daily use (yet)
That patch is for gingerbread roms.
Il see if I can find a link for the ics patch
Sent from my XT860 using xda premium
http://db.tt/8TJOXH64
Xt860 ics patch. Works on all ics roms cm9 and aokp based
Sent from my XT860 using xda premium
GSM/Data work, but signal indicator doesn't properly display and if I change apn settings (I use VPN apn) data never goes up.
I flashed Hashcode's CM9 nighty to see how its gonna be.
Sent from my XT860 using Tapatalk 2
Edit: figured out custom APN issue - it expects username and password for the APN - without u/p - data connection doesn't go up.
leobg said:
GSM/Data work, but signal indicator doesn't properly display and if I change apn settings (I use VPN apn) data never goes up.
I flashed Hashcode's CM9 nighty to see how its gonna be.
Sent from my XT860 using Tapatalk 2
Edit: figured out custom APN issue - it expects username and password for the APN - without u/p - data connection doesn't go up.
Click to expand...
Click to collapse
Signal indicator is a known issue. I believe it only affects gsm.
Sent from my XT860 using xda premium
Just download a widget that shows signal strength until Hash can get it fixed. It was some code change with the Android 4.0.4 updates to CM9 and it affects all ICS builds but Hash doesn't have a GSM setup to test it so he hasn't been able to debug it.
leobg said:
GSM/Data work, but signal indicator doesn't properly display and if I change apn settings (I use VPN apn) data never goes up.
I flashed Hashcode's CM9 nighty to see how its gonna be.
Sent from my XT860 using Tapatalk 2
Edit: figured out custom APN issue - it expects username and password for the APN - without u/p - data connection doesn't go up.
Click to expand...
Click to collapse
Did hashcode remove his xt860 ics data patch from his site? I'd use that, it's the patch that says "xt860" at the top of blog.hash-of-codes.com/downloads/motorola-droid-3/cyanogenmod/ It works for every ics based rom I've tried it with. For apn settings you could try a custom apns-conf.xml with your bell and custom settings in it, couldn't you? The file is located in /system/etc/ and is easy to edit. I just put my custom apns-conf.xml on my sdcard and copy it over once after i flash, then if i have to wipe data etc there isnt any additional setup needed.
Willis111 said:
Did hashcode remove his xt860 ics data patch from his site? I'd use that, it's the patch that says "xt860" at the top of blog.hash-of-codes.com/downloads/motorola-droid-3/cyanogenmod/ It works for every ics based rom I've tried it with. For apn settings you could try a custom apns-conf.xml with your bell and custom settings in it, couldn't you? The file is located in /system/etc/ and is easy to edit. I just put my custom apns-conf.xml on my sdcard and copy it over once after i flash, then if i have to wipe data etc there isnt any additional setup needed.
Click to expand...
Click to collapse
The link I've posted above is for that patch, from my dropbox
Sent from my XT860 using xda premium
Imo better to have people using patches on the dev site/pointing out their there just incase functions/files etc change in the patch. May not be likely but ...
I'm running CM9 on my XT860 and it does work... that said, there are a few issues, it's ok for daily use for an avid early adopter such as myself, but not yet ready for prime time users.
Issues I'm battling right now:
- camera: if I switch to the front facing camera or the video camera, not only does the camera app crash, the only way to get it back at all (on the rear camera) is to reboot the phone.
- dialler: works... but as soon as you dial a number the dialler app exits, the call is still ongoing though but you have to re-open the dialler app to control it.
Everything else seems to work properly at the moment. (haven't tried bluetooth yet though)
Using my XT860 on TELUS in Canada.
I just replied to you in Hash's thread. Indeed you're using XT860 on Telus.
To solve the dialer problem you need V3 sim (newest) from Telus. 10 bucks and this nasty problem is gone. It prevents you from dialing thru conference bridges which I very often use and was very frustrated. Issue is in Motorola's baseband (radio firmware) and affects all roms including stock.
Sent from my Galaxy Nexus using Tapatalk 2
Well that is an odd issue indeed, I never would have linked that to the SIM card, but sure enough, that was it. Replaced the SIM with a v3 sim to solve.
Of course the down side is the SIM is $10, but the SIM doesn't do you any good unless they transfer your account to it which is another $25... (total $35) I got them to waive the cost of the SIM chip, but still had to pay activation.
ve6rah said:
Well that is an odd issue indeed, I never would have linked that to the SIM card, but sure enough, that was it. Replaced the SIM with a v3 sim to solve.
Of course the down side is the SIM is $10, but the SIM doesn't do you any good unless they transfer your account to it which is another $25... (total $35) I got them to waive the cost of the SIM chip, but still had to pay activation.
Click to expand...
Click to collapse
They ripped you off. There is no fee for swapping the sim. You can do this yourself online from the self serve portal. All you need is to supply old sim number and the new one and you're done. No fee for that.
Sent from my Galaxy Nexus using Tapatalk 2
leobg said:
They ripped you off. There is no fee for swapping the sim. You can do this yourself online from the self serve portal. All you need is to supply old sim number and the new one and you're done. No fee for that.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Well that's something they certainly didn't want to admit to...
ve6rah said:
Well that's something they certainly didn't want to admit to...
Click to expand...
Click to collapse
Sorry, I should have been more detailed when I did the suggestion. Not that big hit since you got them to give you the sim for free. But still - it isn't right!
Sent from my Galaxy Nexus using Tapatalk 2
Hello XDA,
So I've purchased my 1st quad-core phone Saturday. I'm extremely happy about the phone's cosmetics and performance. Of course, being the flash-aholic that I am, I decided to beef it up!! After finially getting an AOSP rom that I felt comfortable with, I flashed and everything was great.... Until I noticed that my data stopped working. The funny thing is if I turn on airplane mode, make a call, or restart the phone the data comes on for about 2 minutes and then turns back off. After messing around with settings and such, I restored my stock rom. On the stock rom data works like it should. So I decided to try 2 other roms. One being GE and the other AOSP. Both are doing the same thing with data connectivity.
Is this a known issue? Did I do something wrong? I looked through the Q&A's and I didn't find anything. Keep in mind that I am very experienced up to full development of rooting/flashing/customizing/etc
Thanks in Advanced!!!!!
Update: T-mobile is my service provider
*bump*
It's imperative that I find out if this is fixable or not as I will return the unit if it's not...
Apologies
Sent from my HTC One using xda app-developers app
DonSolo said:
Hello XDA,
So I've purchased my 1st quad-core phone Saturday. I'm extremely happy about the phone's cosmetics and performance. Of course, being the flash-aholic that I am, I decided to beef it up!! After finially getting an AOSP rom that I felt comfortable with, I flashed and everything was great.... Until I noticed that my data stopped working. The funny thing is if I turn on airplane mode, make a call, or restart the phone the data comes on for about 2 minutes and then turns back off. After messing around with settings and such, I restored my stock rom. On the stock rom data works like it should. So I decided to try 2 other roms. One being GE and the other AOSP. Both are doing the same thing with data connectivity.
Is this a known issue? Did I do something wrong? I looked through the Q&A's and I didn't find anything. Keep in mind that I am very experienced up to full development of rooting/flashing/customizing/etc
Thanks in Advanced!!!!!
Update: T-mobile is my service provider
Click to expand...
Click to collapse
Did you try updating the radio firmware to match the ROM that you were using? Did you try another Sense ROM to see if the issue wasn't an underlying setting from a GE or AOSP ROM? Did you flash a custom Kernel? Did you match the RILs? Lots of things that you could try to isolate the issue.
Athrun88 said:
Did you try updating the radio firmware to match the ROM that you were using? Did you try another Sense ROM to see if the issue wasn't an underlying setting from a GE or AOSP ROM? Did you flash a custom Kernel? Did you match the RILs? Lots of things that you could try to isolate the issue.
Click to expand...
Click to collapse
I fixed the issue... Wasn't aware that there was a different section for T-Mobile. Man I fell incompetent smh.... I'm running a Cyanogen Mod now
Thanks as I'm noting your suggestions
Sent from my One using xda app-developers app
DonSolo said:
I fixed the issue... Wasn't aware that there was a different section for T-Mobile. Man I fell incompetent smh.... I'm running a Cyanogen Mod now
Thanks as I'm noting your suggestions
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
I use PA from the regular HTC One forum even though I'm on T-Mobile... It shouldn't matter, I still get the same speeds. Some different ROMs will use different names, like the aosp stuff uses 3g, H, H+ and LTE. In order to enable lte you have to go into the settings for mobile data, APN and then make sure it's the one that's like fast.tmo whatever. That's the LTE APN
Sent from my HTC One using xda app-developers app
what's the exact APN name that should be there? I was reading about it but no one said what T-mobile's APN should be. they just noted that it should be changed the correct carrier.
edit: Thanks Button hit!!
DonSolo said:
what's the exact APN name that should be there? I was reading about it but no one said what T-mobile's APN should be. they just noted that it should be changed the correct carrier.
edit: Thanks Button hit!!
Click to expand...
Click to collapse
"fast.t-mobile.com" for LTE.
I received this update today and, as promised, Wi-Fi calling and YouTube Live Video Broadcasting are both now available. I've tested both and they work on my S6 Edge.
The App Edge menu is also now included, and works as well.
UHQA audio enhancements are supposedly in there too, but I have no compatible equipment to test that.
http://www.samsung.com/us/support/answer/ANS00038768/748052421/?CID=AFL-hq-mul-0813-11000170
Thanks, just got this update as well! Been waiting for this new app edge menu.
Don't forget the extra features in samsung messaging
Sent from my SM-G925V using Tapatalk
Dri94 said:
Don't forget the extra features in samsung messaging
Sent from my SM-G925V using Tapatalk
Click to expand...
Click to collapse
Yeah, I saw that there was some new notification feature in Samsung's messaging app, but since I use Verizon's Message+ it slipped my mind to mention it.
And before I get grief about using Verizon's app, I would just add that it is kind of nice having my SMS messages sync'ed across my desktops, tablets and phone - and not that I have anything against the Samsung native app.
I actually liked the app too but just didn't trust Verizon
Sent from my SM-G925V using Tapatalk
I hear you, but I figure I've already sold my entire genome to Google and Verizon so it's too late to close that gate any longer.
Now they add the app edge. Too bad I've been using glove box for a while now.
Sent from my SM-G925V using XDA Free mobile app
Anyone else "Unable to activate WiFi Calling at this time"?
Rebooted, waited till morning, still no dice. Can't imagine why. Have good WiFi, good cell coverage. Advanced calling is enabled.
Sent from my Galaxy S6E using XDA Free
I'd call Verizon on that one, mine activated just fine.
Make sure your wifi is off while trying to activate it. Mine said that at first, I cut wifi off and then it worked perfectly fine.
Sent from my SM-G925V using Tapatalk
Just noticed that, after this update, the "smart network switch" setting is gone.
Not sure if that means it is now always on, or if it is always off - but I know which ever way it is, it won't be able to be set the other way any more.
EDIT: Restarted my phone today, and the smart network switch is now visible in the WiFi advanced options list. I was probably wrong about it being gone in the first place, but I would swear it wasn't there when I wrote the original post.
kingoanklebreakn said:
Make sure your wifi is off while trying to activate it. Mine said that at first, I cut wifi off and then it worked perfectly fine.
Sent from my SM-G925V using Tapatalk
Click to expand...
Click to collapse
Still no joy. I'll give VZW a call tomorrow, but IMO it's not worth a factory reset if that's what it comes down to.
Sent from my SM-G925V using XDA Free mobile app
Anyone else finding that battery drain is a feature of this update? (I've only updated...advanced calling off )
Sent from my SM-G925V using Tapatalk
ckelly33 said:
Anyone else finding that battery drain is a feature of this update? (I've only updated...advanced calling off )
Sent from my SM-G925V using Tapatalk
Click to expand...
Click to collapse
Is your device battery drain worse from installing this OTA update? if so how much worse is it?
---------- Post added at 11:06 AM ---------- Previous post was at 11:03 AM ----------
Anyone know if this OTA update kills FoxFi?
---------- Post added at 11:16 AM ---------- Previous post was at 11:06 AM ----------
afh3 said:
I received this update today and, as promised, Wi-Fi calling and YouTube Live Video Broadcasting are both now available. I've tested both and they work on my S6 Edge.
The App Edge menu is also now included, and works as well.
UHQA audio enhancements are supposedly in there too, but I have no compatible equipment to test that.
Do you or does anyone know if this OTA update affects FoxFi Wifi Tetther? And How is Battery Drain? Someone said that Battery Drain is worse with this update? Any help is appreciated... Thanks...
Click to expand...
Click to collapse
[/COLOR]
afh3 said:
UHQA audio enhancements are supposedly in there too, but I have no compatible equipment to test that.
Click to expand...
Click to collapse
The stock earbuds enable UHQA. I'm sure at this point in my life I have some level of hearing loss but I don't notice a difference with it enabled.
jeff_roey said:
[/COLOR]
The stock earbuds enable UHQA. I'm sure at this point in my life I have some level of hearing loss but I don't notice a difference with it enabled.
Click to expand...
Click to collapse
Right. I should have been more specific about not having any way to test the UHQA Bluetooth capabilities. On a related note, I'm thinking of trying out Samsung's noise-cancelling Level headphones. I kind of like the control interface, that allows for track previous/next selection and volume adjustment by swiping the ear-cup
I am just downloading it now. Thanks for the heads up.
With those features. I almost don't even care I don't have root.
Just wish there was better selection in the Samsung theme store for free.
I mean the selection we have on the forums here is awesome.
As far as the sound quality goes. Make sure you tune the frequencies using sound alive as well. It makes a big difference on a per user basis.
Foxfi is working without any problems. Battery life feels the same. Wifi calling working as intended.
Is anyone else noticing with this update and the previous one that there are times where the phone seemingly bogs down but then acts fine a few moments later? Feeling like I should do a factory reset, I know the phone can get wonky after updates and it's always recommended to do that, but want to get feedback first if I'm the only one experiencing this?
wtf!!!, this update completely erased everything from my phone, its as if I did a factory reset. Good thing I have most of the things backed up on the cloud....but still....the hassle....
I guess I was due for a factory reset -_-