In the process of rooting my Galaxy S5 I ended up soft-bricking my phone so that it's now in a bootloop. At this point I just want to restore the phone to factory default but I'm having issues doing so.
The issue came when I tried to flash a ROM onto my device using Odin3 which was successful but then, on restart, I got this bootloop. I've now tried a few different ways to fix.
I've:
Cleared cache partition and user data
Tried to use Odin v3.10 to flash stock for different builds (G900VVRU1BOD5, G900VVZW1BOC4,G900VVZW1BOA8) (I believe the phone was on G900VVRU1BOD5 before the bootloop)
I was also stupid and didn't do a backup beforehand.
This thread (http://forum.xda-developers.com/showpost.php?p=53454972) seems to suggest that I need to flash the CP and CSC along with the AP but I haven't been able to locate these files.
Any help would be appreciated!
Errors
I guess I forgot to mention that when I attempt to flash the stock firmware I get a FAIL! (Auth) error from Odin almost immediately no matter which ROM I try.
I had this problem. After days of fighting it I went into the stock recovery and did a factory data reset and that fixed it.
Sent from my SAMSUNG-SM-G900A using Tapatalk
are you trying to flash a ATT stock rom to your Verizon Phone??
Thanks for the replies. I have stock BL and I've tried the reset there and it hasn't helped.
I have a Verizon S5 and am using Verizon stock firmware. Looks like I accidentally posted this in the ATT S5 general section. Sorry...
Related
Tried everything I could with Odin and phone still stuck in a start loop.
I was downgrading from checkROM to official firmware ZSLA2 with CWM (I wanted to keep ROOT, so I selected "Keep CF-Root kernel") due to stability issues, after restarting the phone got into the start loop.
I flashed with Odin official ZSLA2 with the same result (looped start). I flashed XXKKA (again looped start). During the flashing process, Odin says the flashing was successful. By the way, both ROMS are tar.md5 files.
I tried to remove the battery for over 30 minutes and charge it for 2 hours, tried re-partition in Odin (it's my understanding that with a stock rom, it creates a clean installation), but Odin fails to start the process.
What else can I do?
I am sorry if this has previously asked, but I've been searching for over 2 hours and nothing similar came. Somebody mentioned to use a PIT file in addition, but the other person who got his phone soft bricked didn't solve the problem either. As downloading a ROM is time consuming and I've got many problems with upload sites in china (cannot access to most of them), I would thank any help in regards this issue.
Sounds like your kernel isn't talking properly to your ROM.
A fresh start is your best bet. Flash a stock rom and kernel from Odin and reroot it with CF-Root.
What files are you putting into Odin? There should be a total of 4.
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
I am using official ROM N7000ZSLA2_N7000ZSLA2_N7000XLA4_HOME.tar.md5 into PDA and also tried ROM N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5, which I used successfully in the past to make root into my phone.
Does it really make a difference to flash 4 separate files instead of a full pack? Where can I find an official ROM with pda radio and kernel separated? Just untar the ROM?
btyork said:
I'd also avoid the use of a .pit file. I haven't even seen the mention of one in all my time on the Note forum. I really don't think Samsung uses them the way they used to. (I used to have to flash one all the time when testing roms on the original galaxy tab.)
Click to expand...
Click to collapse
Oh, they do come into the Note; I flashed the Beta ICS, and one of the things they mention is to use the PIT file for the 16GB version, instead of the 32GB that comes with the leaked ROM. Unfortunately I deleted that ROM, and donwloading it is painfully slow and also wouldn't necessarily solve my problem as I couldn't even make a phone call.
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
btyork said:
True - the .pit file can change the size of the partition data... But that's not your problem. If the .pit file was the problem - you'd boot, but have 0 storage space (or something else wonky pertaining to your disk size.)
Open the tar up and make sure it has all the files in it. Should be 5.
I've attached a screenshot of the 5 file names. Make sure they are all in the .tar you are flashing.
Click to expand...
Click to collapse
This are the files I am flashing:
Sorry, I am new user and still cannot post screen captures. I do have more than the 5 files.
In XXKKA I have:
Boot
Cache
Factoryfs
Hidden
Modem
param.lfs
Sbl
zImage
In ZSLA2:
Cache
Factoryfs
Hidden
Modem
zImage
btyork said:
Even i had similar problem after flashing Stock ROM using Odin (PC). Only thing i did is just rebooted in recovery and Wipe/factory Reset and Wipe cache. everything went fine.
Click to expand...
Click to collapse
I can only enter into Download mode, not recovery mode.
Odin is full wipe, right? What the hell am I doing wrong?
N7000xxla1_n7000oxala1_oxa
http://hotfile.com/dl/141060546/b0c7420/N7000XXLA1_N7000OXALA1_OXA.rar.html
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
choihan06 said:
download this firmware, it's gonna take awhile but worth a try..
try flashing this rom using PC odin.
pit: Q1_20110914_16GB.pit
pda: CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar.md5
phone: MODEM_N7000XXLA1_REV_05_CL1093393.tar.md5
csc: GT-N7000-MULTI-CSC-OXALA1.tar.md5
check re-partition, auto reboot, F. reset time.
let me know if it works!
Han
Click to expand...
Click to collapse
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
mrfan said:
Well, I finally managed to get my phone back. I was getting a lot of corrupted ROMS. I couldn't download your ROM as well; I managed to install the Beta ICS 4.0.3 which comes with a PIT for repartition, as I think the problem was that my booting partition was screwed.
Problem now is: that rom screws the phone and the keyboard, but at least I have my phone back.
Thank you
Click to expand...
Click to collapse
I have just recently dowloaded and installed the rom without problem. What do you mean by corrupted rom?
Sent from my GT-N7000 using xda premium
I too bricked my phone but after reading this guide (ABD wouldn't recognise my device so I couldn't follow it) I understood the partitions had become messed up.
I read somewhere about the PIT files.
I ODINed the ABYSS Kernal and PIT (Q1_20110914_16GB-patched) for my 16gb n7000 ticked the repartition box. It booted into CWM recovery and I used the restore and bingo.
Fix The problem
I had the same problem, the device got into start loop. JUST DO A FULL WIPE..! and the device should start normally. I worked for me.... :good:
Sent from my GT-N7000 using xda premium[/QUOTE]
Hello everyone.
I have a problem which I hope you'll be willing and able to help with.
I wanted to try out CyanogenMod 10 on my Galaxy S I9000. I was on 2.3.3 so I used Odin to update to 2.3.6 (rooted). Then I installed superuser and mod manager, after which I installed Clockwork. I then used Clockwork to install CM 10. It worked flawlessly and this was my first time flashing ever.
However, I didn;t like CM 10 and decided to revert back to Gingerbread. I read it was as easy as simply using Odin to flash 2.3.6 again. I tried that but got stuck into a bootloop displaying the S sign over and over and over again. I tried downloading the PIT file which made Odin check Repartition by default and flashing like that but it didn't help, I'm still stuck in bootloop. I can access download mode without a problem but I'm stuck in bootloop forever.
Any help would be greatly appreciated. Thank you in advance.
Update: I found a thread detailing how to get back to Froyo so I tried it. I used a PIT file, PDA file, PHONE file and CSC file all separately and it worked. Now I'll just have to update back to 2.3.6 No idea why I was only able to revert back to Froyo and not Gingerbread, but it worked, thread can be closed.
Hey,
Bit of a late answer, but so you can refer to it if you ever go back to custom roms.
When you come back to stock from CM10, or any custom rom for that matter, you need to flash in a file named dbsdata.rfs.tar. Fixes the bootloops (custom roms and stock have different data partitions so incompatibilities in data partition cause bootloops like yours)
Sent from my GT-I9000 using xda premium
Hi good day,
I have a Samsung S3 Mini Latin version and i was wondering if it can't be flashed because i tried multiple flash files. I used Odin, Z3X and FuriousGold and it didn't flash. It said successful but when the phone rebooted it came back to the same data it had. Nothing changed at all. Can someone help me on this.
Thanks! :good:
Vision Electronics said:
Hi good day,
I have a Samsung S3 Mini Latin version and i was wondering if it can't be flashed because i tried multiple flash files. I used Odin, Z3X and FuriousGold and it didn't flash. It said successful but when the phone rebooted it came back to the same data it had. Nothing changed at all. Can someone help me on this.
Thanks! :good:
Click to expand...
Click to collapse
what files you flash?
I flashed the Pit, Bootloader, PDA, Modem and CSC and still nothing it just returns to the previous data the phone had.
Vision Electronics said:
I flashed the Pit, Bootloader, PDA, Modem and CSC and still nothing it just returns to the previous data the phone had.
Click to expand...
Click to collapse
you use the odin v3.09?
KwstPap said:
you use the odin v3.09?
Click to expand...
Click to collapse
I used Odin v1.83, v3.07, v3.09 & v3.10.0. Still got the same result i don't know if the phone needs to be wiped completely but i'm afraid the phone will die on me.
With Odin, all I can flash is a stock rom and a rooted stock rom. Any stock rom with recovery in it would fail. Once I got a root stock rom on it, I used a terminal app to write TWRP to the recovery block. From there I could flash other roms. Back everything up that is unique to our phone like IMEI as soon as you can just in case. Make sure you have copies elsewhere like your pc. You might wipe your internal, external sdcard or both by accident. I'm stuck with f2fs on my system drive, no way to reformat and no way to flash a rom that can use f2fs.
So the recovery block is locked and I think bootloader and possibly another area as well. Blocked as far as Odin, but not from the phone once it is running.
HELP!!! Lost IMEI & Hard bricked Note 8 SM-N950F/DS.
I flashed back my Note8 via Kies3 to stock rom, while updating the process got stuck at 24%. I left it overnight but the phone kept looping to the Installing Update screen then to recovery and on and on.
Then I flashed TWRP recovery through odin and wiped dalvik cache, cache, data and factory reset. The same thing kept on happening but instead of stock recovery it now ends up on TWRP recovery. Then I flashed dm-noverity. After that the phone booted up but there is no IMEI and phone signal. Please help.
mohiminul said:
HELP!!! Lost IMEI & Hard bricked Note 8 SM-N950F/DS.
I flashed back my Note8 via Kies3 to stock rom, while updating the process got stuck at 24%. I left it overnight but the phone kept looping to the Installing Update screen then to recovery and on and on.
Then I flashed TWRP recovery through odin and wiped dalvik cache, cache, data and factory reset. The same thing kept on happening but instead of stock recovery it now ends up on TWRP recovery. Then I flashed dm-noverity. After that the phone booted up but there is no IMEI and phone signal. Please help.
Click to expand...
Click to collapse
Hey. Try download your phone firmware from Sammobile the correct make N950F then use Odin to flash the firmware.
http://www.**********.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Hope this helps
---------- Post added at 03:43 PM ---------- Previous post was at 03:41 PM ----------
AwesomeARC said:
Hey. Try download your phone firmware from Sammobile the correct make N950F then use Odin to flash the firmware.
http://www.**********.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Hope this helps
Click to expand...
Click to collapse
Try this link
https://m.wikihow.com/Recover-a-Bricked-Samsung-Galaxy
Hope it helps
AwesomeARC said:
Hey. Try download your phone firmware from Sammobile the correct make N950F then use Odin to flash the firmware.
http://www.**********.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Hope this helps
---------- Post added at 03:43 PM ---------- Previous post was at 03:41 PM ----------
Try this link
https://m.wikihow.com/Recover-a-Bricked-Samsung-Galaxy
Hope it helps
Click to expand...
Click to collapse
Brother I have tried the above method as per your suggestion but no result.
mohiminul said:
Brother I have tried the above method as per your suggestion but no result.
Click to expand...
Click to collapse
Try
https://www.fonepaw.com/bricked/fix-bricked-android-phone.html
You need Combination file to fix it
lost emei
this happened to me. I lost imei and could not make calls. what network were you on. I downloaded software for that network from sammobile and installed via odin, the imei returned and I was able to make calls again. I think what happened in my case was I rooted phone and put a rom on it. in aroma I selected t mobile America so it installed the file for that. I was on o2. my phone was unlocked. it did not recognise my simcard
Flash different modems
Hi
It has happened to me too many times with different phones including note 8
Just flash different modems and bootloaders to find the proper one.
androidfilehost .com/?w=files&flid=221868
*:Remove the space bofore .com
You can use both odin and twrp but if you want to stay stocked try odin mode.
If none of the above files worked for you look for other modems.
Odd that you can connect note 8 to kies3.. and not switch..
Sent from my SM-N950F using Tapatalk
I have literally tried everything. No results . I have possibly narrowed down the problem. My bootloader (OEM) is locked. If it was unlocked I could have flashed TWRP and then dm-verity no encrypt mod. Anyone with any suggestions. @holifo I got hold of a few combination files but none of them seems to boot beyond the screen FACTORY BINARY.
mohiminul said:
I have literally tried everything. No results . I have possibly narrowed down the problem. My bootloader (OEM) is locked. If it was unlocked I could have flashed TWRP and then dm-verity no encrypt mod. Anyone with any suggestions. @holifo I got hold of a few combination files but none of them seems to boot beyond the screen FACTORY BINARY.
Click to expand...
Click to collapse
Have you tried this one COMBINATION_FA71_N950FXXU1AQK2
While flashing combination file you need to flash HOME_CSC_OXM with it
mohiminul said:
I have literally tried everything. No results . I have possibly narrowed down the problem. My bootloader (OEM) is locked. If it was unlocked I could have flashed TWRP and then dm-verity no encrypt mod. Anyone with any suggestions. @holifo I got hold of a few combination files but none of them seems to boot beyond the screen FACTORY BINARY.
Click to expand...
Click to collapse
Jtag
holifo said:
Have you tried this one COMBINATION_FA71_N950FXXU1AQK2
While flashing combination file you need to flash HOME_CSC_OXM with it
Click to expand...
Click to collapse
Flashed COMBINATION_FA71_N950FXXU1AQK2 Factory binary from 2 sources along with HOME_CSC_OXM. No improvement. :crying:
so your phone is soft bricked. Its less of an issue since you have access to:
-recovery
-dl mode
go to updato.com and grab about 3 different stock firmwares.
1-the oldest one compatible with your phone you can find. forget about your region just be sure its an early FW and its for N950F. f or ds dosent matter.
2-again same as above but try one from south America.
3- same as #1 but from france or north west europe region.
before flashing, enter recovery and wipe data and cashes.
after wipe dont let the phone boot, have it go straight to DL mode.
now use latest odin and flash the firmwares above. if one of the flashes fail in odin Check your cables and usb port if any of the firmware flashes get stuck or give errors. Be sure to flash all BL AP CP and CSC files. for csc I think HOME csc has the pit file so you might also want to try repartition/bootloader update option if nothing else works. Since your phone is probably out of warranty by now.( might want to check if you can simply get it fixed before trying anything of the above first)
edit:
i saw you said having used kies 3 to do the emergency recovery. Im not sure how that were possible. do you mean smartswitch? if you have not used it, then go dl it and do the recovery from smartswitch. I dont even think kies support the note 8.
Ask him - https://forum.xda-developers.com/an...x-box-free-t3648947/post73222755#post73222755
mohiminul said:
Flashed COMBINATION_FA71_N950FXXU1AQK2 Factory binary from 2 sources along with HOME_CSC_OXM. No improvement. :crying:
Click to expand...
Click to collapse
And this file is flashed via odin til the end - with green PASS? Strange.
Hi mate, i know your feelings.
Ok, i just can tell about my issue. I was on a QK6 custom rom with a QKG bl/modem and fell back in jail So i had to flash stock but only the AP (QK6 bc QKG was at work :angel and CSC file. It booted up with the data of the custom rom and worked quite good. Except the gallery. So i decided to flash the QK6 bl/modem. The flash with odin crashed at the bootloader part. The phone booted without connections, no imei, no baseband...an exclusiv paperweight.
I tried a lot all a disaster. I searched for imei repair with the intencion to pay a lot of money but nothing. Even imei gurus said it's impossible for now to fix the imei for the note 8 with knox 0x1 by software.
Last thing i thought before i went crying to bed was the incomplet flash of the bootloader. So i downloaded over night the whole QKG package and flashed it in the morning.
AND all was fine again. I think the culprit is the Bootloader you can't downgrade from QKG. In the Iron Rom thread are the same issues after flashing the QK6 Bootloader with the rom over a QKG bootloader - all have lost there imei and baseband. They also fixed it than by flashing QKG BL (and modem).
This was my story and i hope it would help to fetch your problem.
I have same problem with your case, its made me sick 1 day but here is my success solution worked like charms !!
1. Download newest stock firmware via SAMFIRM ( for me i used XXVN code) extract it you will have AP and CSC using on this case
2. Download BL and CP via this link: (remove space before .com) You will have BL and CP
androidfilehost .com/?w=files&flid=244051
3. Open Odin chose BL, CP download from Androidfilehost. AP and CSC form stock firmware
Flash them and your Note will be back !! Reply me if u success !!
Ps: This case will upgrade ur blootloader to BRA2
And i heard that cant be rooted again, however my Note 8 is undead so im gonna sell it away better than bricked
Good luck from VietNam
Nice !!!! Its worked !! after i got check fail device 3, binary 2. I could flash ap,cp,csc but BL so now my Note is back to stock
Cheer
mohiminul said:
HELP!!! Lost IMEI & Hard bricked Note 8 SM-N950F/DS.
I flashed back my Note8 via Kies3 to stock rom, while updating the process got stuck at 24%. I left it overnight but the phone kept looping to the Installing Update screen then to recovery and on and on.
Then I flashed TWRP recovery through odin and wiped dalvik cache, cache, data and factory reset. The same thing kept on happening but instead of stock recovery it now ends up on TWRP recovery. Then I flashed dm-noverity. After that the phone booted up but there is no IMEI and phone signal. Please help.
Click to expand...
Click to collapse
Does the imei appear as uknown? or a bunch of zeros?
THORMUNZ said:
Does the imei appear as uknown? or a bunch of zeros?
Click to expand...
Click to collapse
The post you are responding to is 5 months old !
Just saying...
Sent from my Galaxy Note 8 using XDA Labs
THORMUNZ said:
Does the imei appear as uknown? or a bunch of zeros?
Click to expand...
Click to collapse
It used to come as unknown. I figured out a solution. Used https://drive.google.com/file/d/1qI8L3y1GkSlQu_Q03dsZr0DfBkb0ZRcs/view?usp=sharing this combination rom and this eng_boot https://1drv.ms/u/s!Aq07ytE0dzjkhv0iFXiB216r10pAvw
my phone booted to factory repair mode and then just went to IME option and dialed *06#
Hi everyone,
So I have a I9305, the factory ROM is not booting, but I do have the Samsung flashtool working, and I also have TWRP installed.
I am trying to flash the factory ROM back to the phone before I install Lineage OS.
I have tried using Odin3 to flash this, but it keep asking for the pit file, when I allow Odin to find the pit file, it then reboots the phone, after this Odin no longer sees the phone until I restart the app, thus loosing the pit file. :-S (I am running this on Linux)
So my question is, how can I flash the factory ROM back to the phone?
Any help appreciated
I managed to find a pit file online, but still cant get Jodin to flash the ROM. What is the best way to flash this factory ROM, can it even be done?
If it cant, then what can I do to get this phone up and running again.
I have read through many articles online stating how this should be done for this phone, but the methods do not work.