this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.
someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.
Nope doesn't work.
I tried it already.
Sorry guys.
Worked for me. Took some time before PCC registered it though.
help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Video instruksion would be very helpfull maybe
Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"
All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.
Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.
I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?
For me worked with magnetic and usb 1A charger! Thanks!
Hi,
A few days ago i tried to connect my phone to the computer but the computer started making connect and disconnect sounds repeatedly. The phone wasn't able to connect to the pc and it didn't charge. I tried another pc with the same result, i also tried other cables again with the same result. But the phone still charged when I connected it to the charger.
Last night however my phone also stopped charging(AC). It was 1% when i woke up and it refused to charge (tried different chargers/cables). I only got it to charge the second time i turned it off and connected the charger. So, the usb port does still work, sometimes when i shut the phone down.
Is anybody familiar with this problem or do you think it's a hardware problem and should I bring it to the store.
Thanks,
Hello, I've got problem with my wife's galaxy s advance.
The phone has a latest stock rom, i don't know which one. (chacked in phone for updates like 2 weeks ago and it said that there were none). It was unlocked.
The phone was never flashed or rooted.
It was left with a charger plugged in yesterday for the whole night.
When we wake up, the phone was off.
Now if you plug in the charger it vibrates shortly after three seconds, no light no nothing.
If you press power it also vibrate shortly - nothing more happnes.
I tried to go to download mode or rcovery - nothing.
Tried to plug in to a pc using USB but it is the same...
Any ideas?
Is it only the battery or is the phone dead?
I got some progres
I plugged the phone to my pc with a diffrent cable, there is a plug in and plug out windows sound, the battery indicator shows up for like 5s, it is very low and the pattern starts all over again, i'll just leave it like this and see what happens
Maybe your wall charger is broken, try another one
AntaresOne - of course, I tried like 5 of them...
the phone reacts only in the pc, fter couple of minutes is still doing the "charge loop"
I've checked the USB in my pc and it's the "always on" one, maybe it provides more Ampers?
After an hour or so it stopped "charge looping" and started to just charge
Now is 28% and everything's back to normal.
Case closed
I had some problems with my Xperia V usb port.
1. Phone didn't charge when on, it only charged when OFF!
2. When I connected USB to Laptop nothing happened, not even charging (When Android is on)
3. When I connected USB to laptop with fastboot/flashmode it disconnected after like 10-15 seconds every time.
4. And the last phase was I couldn't charge my phone even if it was off.
I got it fixed and exact same problems started after a short while.
Currently my phone doesn't charge or notice USB connection when on and only charges when off but I have to put it in specific position so that it starts charging.
Hi. I have a Xperia Z c6603 that suddenly started to charge only when turned off. And even that, only sometimes.
If I have the phone turned on, and connect the USB cable, the phone won't detect it, so it won't charge. And won't even be detected by a PC with ADB. Also, trying to charge it by using the side golden contact won't help, neither.
If I have the phone turned off, and connect the USB cable, the phone will always detect the USB cable, the LED will go red, the screen will show the SONY logo, and then will show the battery icon with the current charge level. And then, sometimes it will start charging. But I will have to try to connect and disconnect the USB cable several times until, maybe, it would do it.
The USB port was replaced sometime ago, and it has been working with no hassle at all. I don't want to get a new battery delivered, if I'm not 100% sure that the battery is the problem.
Can be an electronic trouble with the charging circuit? Has anybody been in this very same situation?
Thanks all.