iam in CyanogenMOD 11 (os 4.4.4) i try to back to stock rom with nokia suite but i cannot Because it say
Connect the phone and press the button power and button volume down during operation and I'm doing it and I did nothing happens
Science you have installed the stock rom more than once and I did after you install the ROM CyanogenMOD it is did this
what i do
You Can Use Nokia Care Suite..And Select the Option Refurbish..
You will need to download the Stock File..Which Are Around 1gb...
i have all this but it is do not do any thing
after i install cm11 ican not flash the stock rom
الموبيل بيشتغل !!
انا عملته بس بعد ما طلع عيني الحمد لله
Related
I have an I9001. I know how to make root/Lots of flash Stock or Custom via odin&cwm/ etc.
When try to Flash a custom Rom today. Phone start with CWM mode. I made all wipes and format data/cache/system/sdcar/mmc but stil phone start with Cwm. I use recovery-clockwork-5.5.0.4-ariesve.tar.
Then I flash a stock Rom and phone open normally. but sometimes its restart and wifi&3G looking together on status bar and phone's screen opeden for 1 sec every 30 sec.
1. Why i can not install Custom Rom (when i try it phone just open with cwm and all wipes not works)
2. Why phone restart a new Stock rom then the screen always opened itself ( i tired XXKQE and XXKQI and same )
Sorry for my bad english.
if u come from ginger roms to ics , maybe at first install when you install rom , it's install recovery , So then you should install rom again.
if this is not your answer , ask your Q in this : http://forum.xda-developers.com/showthread.php?t=1252697
(sorry for my English )
the thing is that my Samsung S wont starts ,when i click the power button its starts in CWM RECOVERY and when i press "reboot system now" it enters a boot loop (the logo keeps running over and over and the phone)
before this happened i originally had the stock ROM of my cellular carrier (2.3.3
then i decided to install another rom and kernel (cyanogenmod 10) so i installed first a clean stock rom (2.3.6) via odin
and then the cyanogenmod rom and kernel (up to now its all fine)
after that i wanted to change and install other rom so i installed again the clean stock rom 2.3.6 via odin...and from then it started to boot loop.
i thought that if i will install the kernel again it will be OK ,but it wont..
and now im in the situation that i have described above..
help SOMEONE please=]
LCPD said:
(sorry for my English )
the thing is that my Samsung S wont starts ,when i click the power button its starts in CWM RECOVERY and when i press "reboot system now" it enters a boot loop (the logo keeps running over and over and the phone)
before this happened i originally had the stock ROM of my cellular carrier (2.3.3
then i decided to install another rom and kernel (cyanogenmod 10) so i installed first a clean stock rom (2.3.6) via odin
and then the cyanogenmod rom and kernel (up to now its all fine)
after that i wanted to change and install other rom so i installed again the clean stock rom 2.3.6 via odin...and from then it started to boot loop.
i thought that if i will install the kernel again it will be OK ,but it wont..
and now im in the situation that i have described above..
help SOMEONE please=]
Click to expand...
Click to collapse
it is because the latest CM10 is based on a different partitioning layout than the stock one.. after flashing CM10 once when you go in a boot loop.. go to CWM recovery by using the three button combo and flash CM10 again.. . this time your rom will boot:good:
replay
ishangoyal said:
it is because the latest CM10 is based on a different partitioning layout than the stock one.. after flashing CM10 once when you go in a boot loop.. go to CWM recovery by using the three button combo and flash CM10 again.. . this time your rom will boot:good:
Click to expand...
Click to collapse
I installed the kernel and then the stock rom again but now its just bootlooping without getting load up to CWM recovery
so how can i get into CWM recovery????
(i tried VolumeUP+HOME+POWER but it just get into regular recovery...)
pull out your battery for a couple of minutes then replace battery
;hold three button forever or until it goes into recovery if that doesnt work
reflash through odin and do it again or check out darkyrom 10. re this gets flashed through odin
LCPD said:
I installed the kernel and then the stock rom again but now its just bootlooping without getting load up to CWM recovery
so how can i get into CWM recovery????
(i tried VolumeUP+HOME+POWER but it just get into regular recovery...)
Click to expand...
Click to collapse
flash darkyrom 10.2 Resurrection edition using odin.. this will give you a GB rom with root
flash CM10 through CWM recovery
reboot.. (you may not be able to boot as of now)
go to CWM recovery again using 3 button combo
flash CM10 again
reboot
this should do the trick
THANK YOU TWO
the Darkys rom 10.2 re was great --- it starts now hahah
i Will try now another rom (not cyagonmod but PilotX)
thank you very muchhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
hi, a had cyanogenmod 10.1 (android 4.2.2) and decided to install jellymod 4.0 via CWM. Now the phone doesnt start (it keeps glowing the X loading icon) and cant restart it in recover mode. (only odin).
please help!!
thank you.
manguicho said:
hi, a had cyanogenmod 10.1 (android 4.2.2) and decided to install jellymod 4.0 via CWM. Now the phone doesnt start (it keeps glowing the X loading icon) and cant restart it in recover mode. (only odin).
please help!!
thank you.
Click to expand...
Click to collapse
Can you enter download mode?(vol.down, home button, power)
If yes, then you can flash firmware to back to normal
If not, then you need to take it to service centre
manguicho said:
hi, a had cyanogenmod 10.1 (android 4.2.2) and decided to install jellymod 4.0 via CWM. Now the phone doesnt start (it keeps glowing the X loading icon) and cant restart it in recover mode. (only odin).
please help!!
thank you.
Click to expand...
Click to collapse
Jellymod 4.0 cannot be run on CM recovery. You should flash a Cocore or other kernal first.
so now take off battery then go to CWM ang then flash cocore then make a wipe ( if it can if not flash new firmware via odin)
paratab said:
Jellymod 4.0 cannot be run on CM recovery. You should flash a Cocore or other kernal first.
so now take off battery then go to CWM ang then flash cocore then make a wipe ( if it can if not flash new firmware via odin)
Click to expand...
Click to collapse
No need to go to the service centre
I flashed cwm via odin with heimdall, then installed cocore, and voila!!!!
by the way.. back yo Cyanogenmod 10.1
thank you very much!
Hey guys
I have a stock sgs i9000 of a friend with gb and i want to flash cm10.1 because gb is too outdated but yeah his pc is broken (and mine too) so we cant do it via a pc so is it possible to do it via the phone itself
I found a guide here but i dont know if it is the right one: http://forum.xda-developers.com/showthread.php?t=2368518
And other thing does a Galaxy s have a bootloader that has to be unlocked?
Sent from my HTC Sensation with JellyBam ROM
yeah that's my guide and it works but you have to be on hingerbread 2.3.6, my bootloader was unlocked so you'll have to check yours before you do anything, you can't go straight to CM10.1 or you may lose your IMEI... you have to progressive flash to CM7, CM9 then to CM10.1
EDIT: once CF-Root is installed with Mobile ODIN you can flash CM7, CM9, CM10.1 in recovery mode... power off, power on while holding Volume Up+Home+Power buttons then select your custom rom (CM7 first) and flash.
ok guys . sorry about my english . i hope you understand me perfectly ..
i have note 5 n920t and i was in 5.1.1 stock rom then i install from odin android 6.0 beta .. (N920TUVU2DOK5-M_CL6256935.zip)
and now when i try install any rom or back to official stock rom from odin . i only get bootloader freeze.. when android start fist up and start to install update and erasing. android go back to restart.
and when i try make reset factory i cant because I get an error. about mount or something
so this is what i did . i install stock rom 5.1.1 (N920TUVS2COKC) and in odin I GO TO uncheck (auto reboot) and when the rom is intalled i turn off my note 5 pressing all fisical bottons..
and i come back to download mode
and install twrp 3.0 and without android up his first time
i go into to twrp recovery and keep all in read mode. and then i can to do reset factory .. and my android up normal.. and run fast and perfectly
but i try this with official marshmallow tmobile N920TUVU2DPD1 and my android lag to much when i open apps or other thing my android isnt good.. so i dont know if i need kernel for that or anything .
I had to return to 5.1.1 doing the same method what i said
my question is . why i have problem when android official stock is installed on my note ..
only i can install to doing what i said.. because cwm recovery dont let me to do factory reset AND BOOTLOADER NOT START IF I DONT INSTALL TWRP BEFORE AND MAKE FACTORY RESET
I WANNT ANDROID 6.0.1 RUN GOOD ON MY NOTE5 N920T .. WHAT I NEED TO DO