Hey guys, I am following the official CM build guide for titan. I have built the build, but the zip isn't in the out folder, and $out isn't a folder. Any help please
Also I'm having a problem with my flash, it doesn't work.
Bump
QuillzToxic said:
Hey guys, I am following the official CM build guide for titan. I have built the build, but the zip isn't in the out folder, and $out isn't a folder. Any help please
Also I'm having a problem with my flash, it doesn't work.
Click to expand...
Click to collapse
Code:
. build/envsetup.sh
brunch titan
And you should get a zip with this commands.
Related
Hi,
I would like to compile a kernel for my Lg o2x... Can someone help me?
I would like some documentation step by step...
Thanks for your answer...
Bye
Alex89_dual said:
Hi,
I would like to compile a kernel for my Lg o2x... Can someone help me?
I would like some documentation step by step...
Thanks for your answer...
Bye
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1227241
Thanks for your answer... I see this thread but i would like to compile a kernel for stock rom, this thread say how to compile a cm7 kernel
Install ubuntu
Then download lg 10e source from lg site.
Then open terminal
sudo apt-get install arm-linux-gnueabi
sudo apt-get install g++-linux-gnueabi
export CCOMPILER=arm-linux-gnueabi-
then extract downloaded lg 10e source
cd /lge/kernel
make arch=ARM star_rev_f_android_defconfig CROSS_COMPILE=$CCOMPILER $*
make -j4 ARCH=arm CROSS_COMPILE=$CCOMPILER $*
After its done
Copy zImage and modules
Sent from my LG-P990 using Tapatalk
Thanks... After copy zimage and modules i flash it on the device or i do something?
Thanks
Hey guys,
I am traying to build aosp rom for the Samsung Galaxy ace GT-S5830I from Source then i have download the kernel and platform from [opensource.samsung.com/reception/receptionSub.do?method=list&menu_item=mobile&classification1=mobile_phone&classification2=&classification3=],
i followed the instructions that i find inside the zip to build the kernel, after that i unpack and repack zimage to boot.img,
i have build the plateform by following the instructions when, but i flash all of them (boot.img, system.img, userdata.img) to the Phone it not start.
Please help me to know what is the probleme
Sorry for my english
To make an AOSP ROM you're going to have the device specific config files and folders for your particular device .
Do you have them ?
"As a friend, just....put an end to me." - Ventus
BOUNS said:
Hey guys,
I am traying to build aosp rom for the Samsung Galaxy ace GT-S5830I from Source then i have download the kernel and platform from [opensource.samsung.com/reception/receptionSub.do?method=list&menu_item=mobile&classification1=mobile_phone&classification2=&classification3=],
i followed the instructions that i find inside the zip to build the kernel, after that i unpack and repack zimage to boot.img,
i have build the plateform by following the instructions when, but i flash all of them (boot.img, system.img, userdata.img) to the Phone it not start.
Please help me to know what is the probleme
Sorry for my english
Click to expand...
Click to collapse
Prepare device config and sync sources using
$ mkdir android
$ cd android
$ repo init -u https://android.googlesource.com/platform/manifest -b android-2.3.7_r1
$ repo sync
For a detailed explanation just search the threads
There r many link on how to build AOSP from source
Becarefull while doin it.... A small advice : Do not try unless xperienced
wilfredcool007 said:
Prepare device config and sync sources using
$ mkdir android
$ cd android
$ repo init -u android.googlesource.com/platform/manifest -b android-2.3.7_r1
$ repo sync
For a detailed explanation just search the threads
There r many link on how to build AOSP from source
Becarefull while doin it.... A small advice : Do not try unless xperienced
Click to expand...
Click to collapse
Yes i have did all of that, i have downloaded the source from android repo, and i have integrated the GT-S5830I as it says in the instructions, and i have builded.
The probleme is that the Device not start (not work) when i flash system.img and userdata.img that result from the build.
BOUNS said:
Yes i have did all of that, i have downloaded the source from android repo, and i have integrated the GT-S5830I as it says in the instructions, and i have builded.
The probleme is that the Device not start (not work) when i flash system.img and userdata.img that result from the build.
Click to expand...
Click to collapse
U made a kernel for it ???
Is the device config debugged ???
after u lunch the build
Brunch the build
hey guys, i am just trying tout some compiling with cm9, i synced up all the files needed and when i type lunch and choose cm_cooper it comes up with this .... Device cooper not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
i am using waylandace's repo, i have previously built cm9 with his repo before?? how can i fix this error?
t
winxuser said:
hey guys, i am just trying tout some compiling with cm9, i synced up all the files needed and when i type lunch and choose cm_cooper it comes up with this .... Device cooper not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
i am using waylandace's repo, i have previously built cm9 with his repo before?? how can i fix this error?
t
Click to expand...
Click to collapse
Try
Brunch
Cyanogen_cooper-userdebug
Brunch will automaticly build zip file to
Sent from my ST25i using xda app-developers app
ok thanks i will try it next time i boot into linux,, its weird because i have used the same device config before
Q&A for [ROM][TITAN][4.4.4] Cyanogenmod 11 [UNIFIED]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][TITAN][4.4.4] Cyanogenmod 11 [UNIFIED]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Faux sound support please...
Tried pINKman Kernel cm12 and fauxsound works but there is no wifi (the toggle doesn't do anything). The KK Kernel does not boot.
Try reflashing the rom like an update. If that does not work, wipe and reflash.
Excellent ROM, no need for me to upgrade to CM 12 or other Loolipop-ROM.
it has started crashing suddenly
It worked like butter for 2-3 days but now it become very slow sometimes and freezes it has happened 20-25 times Please fix it
Thanks to the devs of this well CM11 Port. It works really nice for me. I like all the options in it. I hope this Rom will getting even better. It would be very nice if you could increase the battery life a bit more. I use Frills CPU but its still a bit to much battery comsumption for my taste.
Go on like that devs. I hope there will be an Update soon.
Hello
I am somehow new to development but old to flashing/testing
i would like to build cm11 on my machine
Can you tell me if the steps i list below are appropriate or not?
cd ~/android/system/
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
mkdir -p ~/android/system/.repo/local_manifests
curl https://github.com/motog2014devteam/roomservice/blob/cm-11.0/manifest.xml
repo sync
. build/envsetup.sh
cd ~/android/system/vendor/cm
./get-prebuilts
Are these the right steps?
koradiavatsal said:
Hello
I am somehow new to development but old to flashing/testing
i would like to build cm11 on my machine
Can you tell me if the steps i list below are appropriate or not?
cd ~/android/system/
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
mkdir -p ~/android/system/.repo/local_manifests
curl https://github.com/motog2014devteam/roomservice/blob/cm-11.0/manifest.xml
repo sync
. build/envsetup.sh
cd ~/android/system/vendor/cm
./get-prebuilts
Are these the right steps?
Click to expand...
Click to collapse
One thing is wrong
"curl https://github.com/motog2014devteam/roomservice/blob/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml" should be correct
LuK1337 said:
One thing is wrong
"curl https://github.com/motog2014devteam/roomservice/blob/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml" should be correct
Click to expand...
Click to collapse
Wrong again
curl https://raw.githubusercontent.com/motog2014devteam/roomservice/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml
luca020400 said:
Wrong again
curl https://raw.githubusercontent.com/motog2014devteam/roomservice/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml
Click to expand...
Click to collapse
I don't see anything changed XD
LuK1337 said:
I don't see anything changed XD
Click to expand...
Click to collapse
Check url
luca020400 said:
Check url
Click to expand...
Click to collapse
It's the same.
can u guys paste ur manifest.xml file? upload it somewhere or just attach it here
P.S. CM11
koradiavatsal said:
can u guys paste ur manifest.xml file? upload it somewhere or just attach it here
P.S. CM11
Click to expand...
Click to collapse
http://pastebin.com/amS1J20f
LuK1337 said:
http://pastebin.com/amS1J20f
Click to expand...
Click to collapse
Thank you for your help
Having an error while syncing repo
repo sync -f
fatal: error parsing manifest /home/vatsal/android/system/.repo/local_manifests/manifest.xml: undefined entity: line 6, column 26
Can u please help? Thanks a lot
Is this manifest supposed to be this way?
koradiavatsal said:
Thank you for your help
Having an error while syncing repo
repo sync -f
fatal: error parsing manifest /home/vatsal/android/system/.repo/local_manifests/manifest.xml: undefined entity: line 6, column 26
Can u please help? Thanks a lot
Is this manifest supposed to be this way?
Click to expand...
Click to collapse
No, download raw content of the xml.
LuK1337 said:
No, download raw content of the xml.
Click to expand...
Click to collapse
Didnt get u :|
koradiavatsal said:
Didnt get u :|
Click to expand...
Click to collapse
Code:
curl https://raw.githubusercontent.com/motog2014devteam/roomservice/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml
LuK1337 said:
Code:
curl https://raw.githubusercontent.com/motog2014devteam/roomservice/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml
Click to expand...
Click to collapse
Thanks.. Finally repo sync started.
LuK1337 said:
Code:
curl https://raw.githubusercontent.com/motog2014devteam/roomservice/cm-11.0/manifest.xml > ~/android/system/.repo/local_manifests/manifest.xml
Click to expand...
Click to collapse
Check my old comment [emoji14]
Hello to all.
I am trying to learn building CM and modifying CM source code in order to running 3G and WiFi connections simultaneously on my Sony Xperia TX(LT29i).
I have been unlocked my TX and run CyanogenMod 12.1 Homebuildperfectly.
For building CM,i flash back to Xperia Firmware using FTF file
Code:
The following picture link is now my TX build:
i.imgur.com/APktTle.png
I follow wiki step by step:
Code:
wiki.cyanogenmod.org/w/Build_for_hayabusa
Ubuntu version :
Code:
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 14.04.2 LTS
Release: 14.04
Codename: trusty
I get stuck running breakfast command:
Code:
$ breakfast hayabusa
including vendor/cm/vendorsetup.sh
build/core/product_config.mk:239: *** _nic.PRODUCTS.[[device/sony/hayabusa/cm.mk]]: "vendor/sony/qcom-common/qcom-common-vendor.mk" does not exist. Stop.
Device hayabusa not found. Attempting to retrieve device repository from CyanogenMod Github (github.com/CyanogenMod).
Found repository: android_device_sony_hayabusa
Default revision: cm-10.1
Checking branch info
CyanogenMod/android_device_sony_hayabusa already exists
Syncing repository to retrieve project.
Fetching project CyanogenMod/android_device_sony_hayabusa
Repository synced!
Looking for dependencies
Done
build/core/product_config.mk:239: *** _nic.PRODUCTS.[[device/sony/hayabusa/cm.mk]]: "vendor/sony/qcom-common/qcom-common-vendor.mk" does not exist. Stop.
** Don't have a product spec for: 'cm_hayabusa'
** Do you have the right repo manifest?
Then I follow Helpful Tip– Errors during breakfast,jumping down to the next section Extract proprietary blobs.
Unfortunately,it shows that "modem.b05" doesn't exist.
Code:
-emote object '/system/etc/fireware/modem.b05' does not exist
terminal screenshot's link : i.imgur.com/dX1rh0t.png
--
How can I solve problems?
Any piece of information ,I will be so thankful for your help.
You're missing the android_device_sony_qcom-common repo. Go to github.com/cyanogenmod/android_device_sony_qcom-common and download it manually. Make sure to select the right branch for building CM10.1
Then extract to yourcmsourcedirectory/device/sony/qcom-common and try to build again.
WhiteNeo said:
You're missing the android_device_sony_qcom-common repo. Go to github.com/cyanogenmod/android_device_sony_qcom-common and download it manually. Make sure to select the right branch for building CM10.1
Then extract to yourcmsourcedirectory/device/sony/qcom-common and try to build again.
Click to expand...
Click to collapse
The folder device/sony/qcom-common is already existed and downloaded.
Then I try download the zip file form github.com/cyanogenmod/android_device_sony_qcom-common and test to replace the original one.
Still get stuck running breakfast command, same message occur.
I notice the error message "vendor/sony/qcom-common/qcom-common-vendor.mk does not exist "
Code:
From github.com/cyanogenmod/android_device_sony_qcom-common/tree/cm-10.1 repo
doesn't contain qcom-common-vendor.mk
It is weird.
HandsomeRichard said:
The folder device/sony/qcom-common is already existed and downloaded.
Then I try download the zip file form github.com/cyanogenmod/android_device_sony_qcom-common and test to replace the original one.
Still get stuck running breakfast command, same message occur.
I notice the error message "vendor/sony/qcom-common/qcom-common-vendor.mk does not exist "
Code:
From github.com/cyanogenmod/android_device_sony_qcom-common/tree/cm-10.1 repo
doesn't contain qcom-common-vendor.mk
It is weird.
Click to expand...
Click to collapse
CM team introduced some heavy changes to qcom-common a few months ago, and my bet is that these are responsible for your error. Probably building latest CM12 would work better. Use the git repos by @updateing and you're good to go.
WhiteNeo said:
CM team introduced some heavy changes to qcom-common a few months ago, and my bet is that these are responsible for your error. Probably building latest CM12 would work better. Use the git repos by @updateing and you're good to go.
Click to expand...
Click to collapse
OK,I will try to build CM12 on my device.
Thanks for your friendly help.