" You need to install the viper for lollipop apk and install the driver. Install SELenix mode changer and change to permissive. That should be all you need, but if it doesn't work go to developer options and check use nuplayer..." - Swizzle 82
VIper4Android DL Link
Here is the post about SELinix Mode Changer! All credit to respective devs! While you are there thank em!
Once I am able to post Images and Link I will update this with pictures and DL links!
I have Viper4Android working with busybox working!
All credit goes to Swizzle 82 in the T-mobile G4 Forums. I would have linked to it directly, however as I am not at the maximum posts yet to do that I can not.
So this is going to be a step by step guide as best as I can do without being able to link anything yet.
1.) Install Viper4Android ( A quick google or XDA search will bring you right to where you need to be DL link up in top post, and while it's downloading PLEASE Thank ZhuHang)
2.) Run Viper4Android, This will prompt you to make a few selections such as audio quality, READ EACH DESCRIPTION CAREFULLY! Make audio selection.
2a.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2b.)
2c.)
3.) Viper4Android will prompt you to install drivers, continue, it will then inform you do not have busybox installed (If you don't have it installed).
3a.)
4.) Select yes to install Busybox, Should take you to the PlayStore with BusyBox. Tap Install and wait for it to complete.
4a.)
4b.) Open Busybox app and wait for smart install ( This was how I installed it)
4b.) Continue with install once it's is all loaded.
5.) Open up Viper4Android, Tap the options Dots ( 3 vertical dot in upper right hand corner), Select install drivers, Make selection for audio quality again. Let drivers install.
5a.)
5b.)
6.) Head over to settings for your device, Tap General, then navigate to Developer Options. Scroll Down to Media and Check "Use Awesome Player"
6a.)
6b.)
7.) Restart Device and Enjoy Tinkering with your audio settings.
7a.) If it isn't working head to the options in Viper4Android and select FX Compatible
ALL CREDIT GOES TO RESPECTIVE DEVS AND POSTERS! I TAKE NO CREDIT FOR CREATING ANY APP OR PROGRAM USED TO ENABLE VIPER4ANDROID!
If this has any errors or needs Clarification please let me know! I made this from memory, If I missed any steps please let me know.
Works beautifully, thanks!
For some reason, I cannot get this to work on my device. I did all of the steps in the post, including enabling awesomeplayer, and I notice no difference between stock audio and V4A. I installed the A4.x apk from the V4A zip.
ironbesterer said:
For some reason, I cannot get this to work on my device. I did all of the steps in the post, including enabling awesomeplayer, and I notice no difference between stock audio and V4A. I installed the A4.x apk from the V4A zip.
Click to expand...
Click to collapse
What music app are you using?
tabp0le said:
What music app are you using?
Click to expand...
Click to collapse
I'm using the stock LG player.
Sent from my LGLS991 using Tapatalk
ironbesterer said:
I'm using the stock LG player.
Sent from my LGLS991 using Tapatalk
Click to expand...
Click to collapse
I use Play Music
Same issues but i use gonemad, works on my n5.
Only Google Play Music works for me, can't get it to work with Spotify. I read that making Spotify a system app might make it work but haven't been able to, it just deletes the app from my phone or it doesn't open.
shahran said:
Only Google Play Music works for me, can't get it to work with Spotify. I read that making Spotify a system app might make it work but haven't been able to, it just deletes the app from my phone or it doesn't open.
Click to expand...
Click to collapse
Sorry for the late reply here, I have no problems using spotify with Viper? Have you solved the issue or gotten it to work?
Onclot said:
Sorry for the late reply here, I have no problems using spotify with Viper? Have you solved the issue or gotten it to work?
Click to expand...
Click to collapse
I have not, not sure what I can do to make it work. Loving this on gplay music though, like I'm hearing music for the first time, sounds so much better.
Hi, do I need to root my LG g4 to get viper to work?
Klobue said:
Hi, do I need to root my LG g4 to get viper to work?
Click to expand...
Click to collapse
Yeah Root is req
Not working with LG stock music player. Followed all the steps, even FX compatible mode. The equalizer from the music player must be set to normal, I guess?
bel57 said:
Not working with LG stock music player. Followed all the steps, even FX compatible mode. The equalizer from the music player must be set to normal, I guess?
Click to expand...
Click to collapse
Installed all the apps? (Busybox, SELinux Mode Changer)
Went to dev options under device settings and selected use AwesomePlayer?
Tried reinstalling Busybox and V4A after a restart?
Selected the force V4A option under V4A app?
I uninstalled the driver and V4A app, then flashed the zip a fellow linked in some related post. Works fine now :victory:
Can you please post that zip link, please?
Jessooca said:
So viper works on Android 5.1+ I was just looking for an audio boost for my Tab Pro 12.2 Running cm12.2 and all I found was it only works on Android 5.0 and below.
Thanks for sharing this, hopefully it'll fix my only issue on my tablet. My G4 has no issues as of yet.
Click to expand...
Click to collapse
I have it running on my G4 just fine. This may be a question for the creator of V4A, or at least that forum post. The link to it is in the OP. Good luck
V4A works with the stock music player but for some reason it doesnt work with jetAudio player. Did anyone get it to work with jetAudio player? i really liked this player on my old phone but just tried it out and V4A wasn't working with it. Ive tried to force v4a in the settings without any luck.
I have been trying to get this to work all week with multiple apps. Including Play music, spotify & system music player. No luck. Just keep getting drivers need to be installed nonsense. I install it tells me to reboot. I reboot start Viper & get... you guessed it!!! Drivers need to be installed! I have followed all the steps perfectly, over & over again. Please help. I have also installed Viper as a system app. No luck. Ran from both SD card & internal mem. No luck. Any ideas at all?
musiqlives said:
I have been trying to get this to work all week with multiple apps. Including Play music, spotify & system music player. No luck. Just keep getting drivers need to be installed nonsense. I install it tells me to reboot. I reboot start Viper & get... you guessed it!!! Drivers need to be installed! I have followed all the steps perfectly, over & over again. Please help. I have also installed Viper as a system app. No luck. Ran from both SD card & internal mem. No luck. Any ideas at all?
Click to expand...
Click to collapse
Did you install all listed apps? Busybox? SELinixmode changer? Is the phone rooted? I am sorry for asking what may seem like redundant questions.
Related
First, all the credit goes to Dhananjay for he's tutorial and zhuhang for create this great app.
Disclaimer
Installing mods on your Android device may leave it non-functional or even soft-brick it. DroidOrigin will not be responsible if anything such happens. Recovering is easy however, and we will definitely help you.
Before You Begin
- To install V4A, you must have a rooted phone. If you haven’t rooted yet, you can check for your device in our Rooting section.
- Make sure no other audio mods are installed, like AudioFX. If there is, you will need to remove it completely. If you have problems doing so, use Titanium Backup for.
- Also, you must have BusyBox installed on your ROM. You can download it by clicking the link below. (You can try other busybox installer apps, but if you face issues while installing V4A drivers, you must install this one.)
https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=fr
In case the driver installation fails – It seems like some manufacturer specific devices require SELinux status to be set as Permissive. You can use SELinuxModeChanger app to do the required. Thanks to our reader — Avip, for notifying this.
Steps to Install ViPER4Android on Marshmallow:
1. Go to the V4A website and download ViPER4Android FX, or direct link : http://www.mediafire.com/?ar5men9o5ar7inb
2. Move the downloaded ViPER4Android_FX_v2401_A4.x-A6.x.apk to the phone’s storage.
3. Make sure, you have enabled Unknown sources in Settings > Security.
4. Now, using a file manager (e.g Solid Explorer), install the apk manually, as you normally would do.
5. Once it has been installed, go to app drawer and run ViPER4Android FX.
6. When you will run the app for the first time, it will prompt you to install V4A drivers on your device, so tap on Yes. As soon as you tap, you will have to grant root permissions, so choose GRANT.
7. V4A app will automatically detect the system and install appropriate drivers for the mod to work properly, and upon completion, the following message will be displayed: ‘Driver installed, please reboot your device’. And now as advised, reboot your phone/tablet (I hope you know how to do that!).
8. When the device has rebooted, again launch ViPER4Android FX app.
9. Tap on the 3-dot menu button on the top-right of the app, and select Driver Status. It should display Status: Normal.
If the driver installation fails, read the last point of the ‘Prerequisites’.
10. Start using ViPER4Android now! Tweak the settings to best match your phone and output device. Are you using specific profiles for your phone? Post them below and share it with other users.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Here my setup for Shuttle+ and Headset Shure SE215 :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Status is Normal but two are not enabled. Is this correct? Not noticing an impact to audio throught my Sennheisers.
I think you have to disable audio fx or music fx.
rYz11 said:
Status is Normal but two are not enabled. Is this correct? Not noticing an impact to audio throught my Sennheisers.
Click to expand...
Click to collapse
Enable : no, is not good should be yes and processing : no is ok for me.
You should have Music FX or Audio FX remove like say Vicky90.
You can use Titanium Backup to completely remove it.
You absolutely must remove Audio tweaking stuff what is in your Rom.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Vink67 said:
Enable : no, is not good should be yes and processing : no is ok for me.
You should have Music FX or Audio FX remove like say Vicky90.
You can use Titanium Backup to completely remove it.
You absolutely must remove Audio tweaking stuff what is in your Rom.
Click to expand...
Click to collapse
I can't find any Music FX or Audio FX in app drawer, using Titanium or manually looking through data and priv-app folders. Weird. I'm running Overdrive 's MM ROM v. 9 and Beastmode 56.8 kernel. No other audio mods installed or enabled. I'll keep digging...
@rYz11 then make sure busybox installed and change selinux mode to permissive if not set.
vicky90 said:
@rYz11 then make sure busybox installed and change selinux mode to permissive if not set.
Click to expand...
Click to collapse
Thanks. Yes, stericson busybox is installed and updated and I'm running a permissive kernel (Beastmode 56.8). I'm noticing slight gain so I'll keep playing with it and ignore the not enabled messages.
rYz11 said:
Thanks. Yes, stericson busybox is installed and updated and I'm running a permissive kernel (Beastmode 56.8). I'm noticing slight gain so I'll keep playing with it and ignore the not enabled messages.
Click to expand...
Click to collapse
Well, major "d'oh!" moment - was checking driver status with no music playing. Thanks to @stueycaster for common sense suggestion.
rYz11 said:
Thanks. Yes, stericson busybox is installed and updated and I'm running a permissive kernel (Beastmode 56.8). I'm noticing slight gain so I'll keep playing with it and ignore the not enabled messages.
Click to expand...
Click to collapse
Well, what version of busybox do you install ? The one I give the link ? Because other don't work for me.
And Enable should be yes because if not ViPER4Android shouldn't work.
Maybe if you are any audio tweaking stuff in your phone/Rom it's kernel fault who use audio mod. And are you using Xposed ? Because that could be bad too.
But I don't know the ROM and kernel you are using so it's difficult to help.
I have for long time stay away of ViPER4Android because I was thinking it was another illusion of sound quality, but good install and well configure, WOW !
Sorry bro, can't help much.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Vink67 said:
Well, what version of busybox do you install ? The one I give the link ? Because other don't work for me.
And Enable should be yes because if not ViPER4Android shouldn't work.
Maybe if you are any audio tweaking stuff in your phone/Rom it's kernel fault who use audio mod. And are you using Xposed ? Because that could be bad too.
But I don't know the ROM and kernel you are using so it's difficult to help.
I have for long time stay away of ViPER4Android because I was thinking it was another illusion of sound quality, but good install and well configure, WOW !
Sorry bro, can't help much.
Click to expand...
Click to collapse
Np, all is good now as long as I remember to check driver status when music is playing.
I already had busybox installed, I made sure it was updated. FYI - I'm running Overdrive's MM Rom (T-Mobile Note 4) with Beastmode 56.8.
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
dd98 said:
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
Click to expand...
Click to collapse
Thx bro, but don't have problem [emoji4]
rYz11 said:
Np, all is good now as long as I remember to check driver status when music is playing.
Click to expand...
Click to collapse
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
dd98 said:
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
Click to expand...
Click to collapse
Thx bro but I don't have problem [emoji4]
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
rYz11 said:
Np, all is good now as long as I remember to check driver status when music is playing.
Click to expand...
Click to collapse
Nice ! Happy it will work.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
dd98 said:
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
Click to expand...
Click to collapse
That was the only way I could get it working for me. With the app of the OP, everything goes OK, and driver status enabled, etc., but it hasn't any effect in sound.
I have stock rom+kernel, but with exposed and gravity box.
A much easier way to install Viper is in this thread:
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Just download Viper stock 5.4 zip, flash in recovery and voila! No need to mess with the selinux changer app or do anything else.
Hedied4me said:
A much easier way to install Viper is in this thread:
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Just download Viper stock 5.4 zip, flash in recovery and voila! No need to mess with the selinux changer app or do anything else.
Click to expand...
Click to collapse
It's not the same version but it work yes.
Sent with my MotoG3 from another galaxy !
Vink67 said:
It's not the same version but it work yes.
Sent with my MotoG3 from another galaxy !
Click to expand...
Click to collapse
Its 2.4.0.1 which is the most up to date version of v4a. I was only suggesting it because you don't have to use selinux mode changer app, which is dangerous for security reasons. Not to mention the zip takes care of everything for you.
Sent from my MotoG3 using XDA Labs
AutoMagisk no longer works, as Magisk stopped supporting this method in v8
AutoMagisk
Automatically disable Magisk root when certain apps, such as Android Pay or Pokemon Go are running to bypass SafetyNet
Note: You MUST have Magisk installed, with an unmodified system and Phh's Superuser. This is very important, AutoMagisk will NOT work otherwise.
Confused on how to do this? See this Android Police guide
Note: Using android pay to pay only works from the screen off with the option enabled in AutoMagisk's settings to disable root when the screen is off. If you try to pay with the screen already on from an app which does not have root disabled, AutoMagisk will NOT disable root in time and you will get rejected.
AutoMagisk has the following features:
- Disable Magisk root when an app is launched and re-enable it when an app that's not also set to disable is launched (usually when the app is closed again)
- Disable Magisk root when the screen is locked (optional, enable in the settings), to probably allow Android Pay to work from the screen being off
- Ignore certain apps: Say you have Pokemon Go set to disable root, and you open Facebook's chat heads, with Pokemon Go behind it. Root will not be disabled, but if you open Messenger without Go being open in the background, root will not be disabled
- Notification when root is disabled (can be turned off in the settings), as a reminder
How does it achieve this?
- An AccessibilityService to monitor app launch
- A background service/broadcast receiver for the screen turning off (turning back on is handled when an app is launched)
Because it uses an AccessibilityService, you MUST enable it in settings. You will be prompted to do this when launching AutoMagisk.
Apps with root disabled by default:
Android Pay
Google Play Services
Pokemon Go
NatWest
NatWest Offshore
Isle of Man Bank
Ulster Bank
Apps ignored by default:
Twilight
Facebook Messenger
System UI
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still confused? Watch this video to show it in action
Download from Google Drive (Also available on XDA Labs)
Thanks will give it a shot
Very nice thanks. It works perfectly.
Sent from my SM-N910T using Tapatalk
Works great thanks
Is there any way to add a way or function to hide the superuser app (I'm using phh.su) too? My cable provider is blocking live streaming for root users and the trigger is the su app.
I flashed nexus factory image and removed Magisk. Should be 100% stock. AT&T Uverse app still blocked live tv. I uninstalled the su app, and live tv worked. Re-installed app without root (as in only installed app, didn't flash any form of root) and live tv blocked again.
If this app isn't capable of doing this, any suggestions would be welcome, even of manual steps are required.
Love the app..working like a charm on Oneplus one. Kudos for the author!
Enviado do meu A0001 através de Tapatalk
Has anyone test this to see if its working with the modified systemless root version of xposed, or the normal xposed module?
Is there a way to make a donation to get rid of the ads?
daleski75 said:
Is there a way to make a donation to get rid of the ads?
Click to expand...
Click to collapse
Unfortunately not, as the app isn't on the Play Store and won't be because I believe it will get removed for TOS violation
Quinny899 said:
Unfortunately not, as the app isn't on the Play Store and won't be because I believe it will get removed for TOS violation
Click to expand...
Click to collapse
I was thinking more adding the lines of a donation version here on XDA only?
unmounting root? what am i doing wrong here ? I have the pph superuser installed
@Quinny899 Very usefull.
Would you upload this on playstore too?
It's very useful! Thank you
About to give this a Shot! Thanks for work!
Sent from my Nexus 6 using XDA-Developers mobile app
Works perfectly after a reboot. Is the Magisk Manager still needed with this?
I read the tutorial on the Android Police website and from what I understand to make Magisk installation you must uninstall the Xposed and have the original cell recovery, I got it right?
Can anybody help me? I follow all the steps, but automagisk disables automatically in accesibility settings. I dont have twilight and in facebook messenger i have disabled facebook bubbles. I restarted my device also, gave to automagisk all the permissions (including authomatic boot).
Solution: Ok I found the problem, for those who suffered as me only have to allow automagisk as a protected app when the screen turns off
Working good and awesome job on Moto XT1563 Stock ROM with systemless root Magisk v6, I uninstalled the Magisk Manager after finding out how easy to use this app was instead of toggle on/off.
Thanks for a great job!
gk1984 said:
Is there any way to add a way or function to hide the superuser app (I'm using phh.su) too? My cable provider is blocking live streaming for root users and the trigger is the su app.
I flashed nexus factory image and removed Magisk. Should be 100% stock. AT&T Uverse app still blocked live tv. I uninstalled the su app, and live tv worked. Re-installed app without root (as in only installed app, didn't flash any form of root) and live tv blocked again.
If this app isn't capable of doing this, any suggestions would be welcome, even of manual steps are required.
Click to expand...
Click to collapse
Sorry that this post is a bit OT but gk1984 has a bit of a special situation.... I will remove this post if requested.
@gk1984
If you've got a Nexus device (or any other device that supports Multirom), here's what you do.
1. Check out videos of Multirom on youtube and see if it's something that fits your needs (it works perfectly for me on a Nexus 6); if it does, then keep reading...
2. Wipe your phone, except for userdata, install a fresh copy of your stock System image, boot it once and set it up the way you like then Reboot to TWRP and make a full backup.
3. Root your phone and install the Multirom Manager app (this makes the rest very easy, it can all be done manually but this way is much easier) then use it to install a kernel with the kexec-hardboot-patch, Multirom Recovery, and Multirom itself.
***note: many custom kernels already have this patch included and you can use one of those instead. There will be a list in the thread for your device.
4. Reboot to Multirom Recovery, use the Multirom menu to add a Rom, choose from Backup and use the completely-stock backup you made earlier.
5. Reboot to System and choose your Rooted Main Rom or Unrooted Secondary Rom.
6. When you want to switch between Roms just reboot and select the one you want.
I added this to your spreadsheet already, but the Elan Credit Card app: https://play.google.com/store/apps/details?id=com.elan.icsmobile.elanapp&hl=en works if I manually toggle root off in Magisk Manager, but not when it's selected in AutoMagisk. The APK is com.elan.icsmobile.elanapp-1.
Hi, I build a ROM few days ago for this device based on official stock.
Main features:
- 100% Based on the latest official stock (ZUI_2.3.044ST).
- Removed system applications and Chinese apps do not consider essential.
- Play Store and minimum gapps already integrated.
- English Language and European time zone set from the first screen.
- Root, SuperSU and busybox added.
- Vega Music app preinstalled as music player.
- AdAway tool ready to play.
- Utility to lock screen with a single press (Lock).
- Speaker and headphones volumes increased.
- Other minor tweaks.
CHANGELOG:
[v2.1] (2016-11-15)
- Some apps updated and others clenaned.
- Added init.d support.
- Fixed volume increases.
- Replaced stock chinese browser by UC Browser.
[v2] (2016-10-22)
- Update to stock firmware ZUI_2.3.044ST.
Some considerations:
- To install the ROM, you must have unlocked bootloader and changed the original Recovery (recommended below).
- As in the original firmware, the original languages (English and Chinese) are maintained.
- Desktop icons shaded correspond to applications that are not included in this ROM, you can delete the icons or download applications directly pressing them, if interested.
- The app System Update is not removed, but is not operational with rooted/unlocked bootloader. It is useful to restart directly to Recovery.
- The security application detects Adaway tool as virus. You can ignore the warning or delete. It was downloaded directly from the official version, it's supposed to be safe.
- There are several versions of Recovery out there, which is indicated below which has been tested and has given no problems recommended. It is in Chinese / English, to start the Recovery the first time select the option to change it to English.
WARNING:
Please, first of all make a FULL Recovery backup before install.
DOWNLOADS:
LATEST ROM: ZUK_Z2_Pro_Gedeon_v2.1.zip (1,12 GB)
ALTERNATIVE DOWNLOAD: ZUK_Z2_Pro_Gedeon_v2.1.zip
PREVIOUS ROM: Zuk_Z2_Pro_Gedeon_v2.zip (1.12 GB)
RECOVERY RECOMMENDED: TWRP-3.0.2-20160712-ZUK_Z2_PRO-CN-wzsx150.zip (23.44 MB)
Say thanks, its free.
What do you mean by Speaker and headset volume uploaded? is there any changes in the volume ?
anupsnair said:
What do you mean by Speaker and headset volume uploaded? is there any changes in the volume ?
Click to expand...
Click to collapse
Yes, the are increased. Translation error fixed, sorry.
recoba23 said:
Yes, the are increased. Translation error fixed, sorry.
Click to expand...
Click to collapse
Cool, thanks, just installed this rom, pretty neat. Not been able to activate the google assistant, not your ROM fault, but tried multiple forums and still no go.
Edit : Figured out a way to activate the assistant, need to enable the onscreen navigation and then select the home button.
The camera is laggy and is taking time to launch and the onscreen filters in the app doesnt work as well.
Have been using for 2 days now. Most usable ZUI so far IMO. Definitely a daily driver for me.
I experienced no camera problems, unlike @anupsnair .
anupsnair said:
Cool, thanks, just installed this rom, pretty neat. Not been able to activate the google assistant, not your ROM fault, but tried multiple forums and still no go.
Edit : Figured out a way to activate the assistant, need to enable the onscreen navigation and then select the home button.
The camera is laggy and is taking time to launch and the onscreen filters in the app doesnt work as well.
Click to expand...
Click to collapse
Edit : The camera started working after clearing the cache. Now for some reason VOLTE / HD calls arent possible, I reverted to the old backup and it seems fine there.
@recoba23, how do u go about changing the volume of the headset and speaker, is it a build.prop edit or any other steps ?
anupsnair said:
Edit : The camera started working after clearing the cache. Now for some reason VOLTE / HD calls arent possible, I reverted to the old backup and it seems fine there.
@recoba23, how do u go about changing the volume of the headset and speaker, is it a build.prop edit or any other steps ?
Click to expand...
Click to collapse
Camera system and VOLTE calls options have not been modified, so they should work like the original firmware.
There are many explains and mods for change volumes, if you want to learn I recommend you take a look.
Great job! Another ROM for Z2 PRO. Love how the development is picking up speed on this amazing phone!
Great ROM so far! Thank you very much.
But i hvae a little problem: When i try to add a digital clock widget from a third party provider (like google clock app) the app shows me after phone was in stand-by "loading" for the app and nothing happen.
What's the matter?
RealNBB said:
But i hvae a little problem: When i try to add a digital clock widget from a third party provider (like google clock app) the app shows me after phone was in stand-by "loading" for the app and nothing happen.
What's the matter?
Click to expand...
Click to collapse
I tried but doesn't happend, maybe launcher bug. Try with another launcher.
Who can help?
I come from MoKee-CM13-Build for Z2 Pro.
I install this TWRP and the ROM (2.1).
Ower the restart i see the ZUK-Start-Screen and over free Minutes the phone shut of.
Can someone please provide an alternative download link? I am constantly getting 'connection lost' and there is no possibility to resume download, so I have to start from scratch.
Amazing device, more than 55 days online without reboots, crash or problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
recoba23 said:
Amazing device, more than 55 days online without reboots, crash or problems.
Click to expand...
Click to collapse
what rom you have?
iliakele said:
what rom you have?
Click to expand...
Click to collapse
GEDEON
recoba23 said:
GEDEON
Click to expand...
Click to collapse
any bugs?
Does this rom add expandable notifications/quick reply)
DebianUser said:
Does this rom add expandable notifications/quick reply)
Click to expand...
Click to collapse
Same as original firmware.
Hello, will there be a "[ROM] Gedeon" on the ZUI_2.5.335_ST?
Does it worth do a downgrade for 2.5 for this ROM? I don't know why I'm having problems with quick charger in the 2.5. (is it possible that a dirty flash by OTA made this?). I'm only concerned about the camera on this ROM.
Hey guys!! so earlier I have come up with Dolby Atmos mod for Samsung Nougat devices, but it still bugged me that Viper4Android was not working!! So after countless hours of brainstorming, I finally got viper4android to work on Nougat!!
So here you go!! Also works with my Dolby Atmos!
Tested devices:
- S6 edge+
- Note 5
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
- Samsung device
- Nougat rom (N-lite V3 rom users, please wait for V4 rom. Pre-installed busybox on V3 interferes with viper driver installation)
- Rooted by Magisk (Dolby does not need root. Only viper needs root by magisk)
Installation instructions:
- Flash attached viper zip file and UPDATE zip file in TWRP. Users already using this mod, please see update instructions below.
- Reboot
- Install Busybox by Meefik here - https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=en
- Open Viper4android app and install drivers if it prompts.
- Enjoy!! Flash DolbyAtmos zip if you want
Update instructions:
- Uninstall Viper4android drivers from the menu in Viper4android app.
- Flash the update zip.
DolbyAtmos thread here: https://forum.xda-developers.com/s6-edge-plus/development/audio-mod-dolbyatmos-t3553494
Download Mirror:
MEGA - Main zip
MEGA - Update zip
Thanks and Credits:
- @CaptainTiiti for the countless hours of support and guidance and motivation, without him, this project would have never made it here
- @topjohnwu for the magisk stuff
- The developers behind Viper4Android
- @worstenbrood for the original dolby atmos mod
- @gtaelbordo for the kindness and support, and for the icons of DolbyAtmos
Hope you like it. Leave a Thanks if you do.
Also join me on telegram chat at https://t.me/su_community
See you soon!
Reserved. Viper4android profiles coming soon here.
Reserved 2
works thanks
Thanks for your mod. Does it work with adapt sound?
Ringo1989 said:
Thanks for your mod. Does it work with adapt sound?
Click to expand...
Click to collapse
In my limited time testing with adapt sound, it does work. if you can, test extensively and report back
CrsMthw said:
In my limited time testing with adapt sound, it does work. if you can, test extensively and report back
Click to expand...
Click to collapse
after testing .. dont work ..after rom Update. which rom do u use?
Sent from my Samsung Pixel XL using XDA Labs
gtaelbordo said:
after testing .. dont work
Click to expand...
Click to collapse
Oh it doesn't? That's weird, I did notice some change in sound, but I didn't bother much cos I found it sounds worse
CrsMthw said:
Oh it doesn't? That's weird, I did notice some change in sound, but I didn't bother much cos I found it sounds worse
Click to expand...
Click to collapse
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
gtaelbordo said:
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
Click to expand...
Click to collapse
so it works until a reboot... after reboot i got the same meessage ... i read it on another thread.. i know the problem but i dont have the knowledge to change it)
Sent from my Samsung Pixel XL using XDA Labs
gtaelbordo said:
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
Click to expand...
Click to collapse
I am using Dev-base QB4.. Yeah some N-lite users have said that it does not work for them.. Maybe he changed something that is required by viper? I will talk to rainbow_dash and see what's up.
CrsMthw said:
I am using Dev-base QB4.. Yeah some N-lite users have said that it does not work for them.. Maybe he changed something that is required by viper? I will talk to rainbow_dash and see what's up.
Click to expand...
Click to collapse
okay thanks
gtaelbordo said:
okay thanks
Click to expand...
Click to collapse
Okay, so I talked to rainbow_dash and apparently he had some other busybox built into the v3 version of his rom, that's not compatible with viper. And even if you install the meefik one, it reverts back to his busybox after a reboot. And he has agreed to fix that in the upcoming N-lite v4!
CrsMthw said:
Okay, so I talked to rainbow_dash and apparently he had some other busybox built into the v3 version of his rom, that's not compatible with viper. And even if you install the meefik one, it reverts back to his busybox after a reboot. And he has agreed to fix that in the upcoming N-lite v4!
Click to expand...
Click to collapse
okay good to know thanks
Remote service stopped everytime I press back button until open Dolby apps
Sent from my Redmi 3X using Tapatalk
jmmigo said:
Remote service stopped everytime I press back button until open Dolby apps
Click to expand...
Click to collapse
I don't see remote service in my Samsung phone, maybe it's something specific to your phone. Try freezing this remote service using Titanium backup or something like that, if you don't use it...
Hi, thanks for the good work, works perfectly on my rom with Dolby
IZI.Xav said:
Hi, thanks for the good work, works perfectly on my rom with Dolby
Click to expand...
Click to collapse
You are welcome!! Feel free to add both audio mods into your amazing rom if you want, with credits
CrsMthw said:
I don't see remote service in my Samsung phone, maybe it's something specific to your phone. Try freezing this remote service using Titanium backup or something like that, if you don't use it...
Click to expand...
Click to collapse
no, i mean when open dolby atmos, eq work well but if i press back button to back home, dolby atmos not fuction. I ever use Dolby Digital and when pressing back to back home, Dolby eq not fuction and written "remote service stopped". although there is no such statement in your Dolby atmos but it happened exactly. I'm sorry for the misunderstanding and my bad english. btw thanks for your job :good:
jmmigo said:
no, i mean when open dolby atmos, eq work well but if i press back button to back home, dolby atmos not fuction. I ever use Dolby Digital and when pressing back to back home, Dolby eq not fuction and written "remote service stopped". although there is no such statement in your Dolby atmos but it happened exactly. I'm sorry for the misunderstanding and my bad english. btw thanks for your job :good:
Click to expand...
Click to collapse
Oh that's weird..
Hello friends,
Most of you guys should be familiar with Google camera and it's few awesome features like Portrait mode, Lense blur and HDR+ etc. But there is lots of confusion how to install it on your device. You have to go multiple processes to achieve that properly. But when it comes to beginners, it's kinda impossible for them, I mean quite hard. So on request of some of you guys, I have come with all in one package (AIO) of Google camera. Only requirement is magisk must be installed and working properly. So let's start with the process.
If you don't know how to install magisk, head to this thread.
Step 1: download the google camera zip from here, it's packed as a magisk moudle.
Step 2: Open Magisk manager and swipe from left just as you do in most of the apps to see menu options. Choose "moudels" option and you will see all the modules installed if you have any. Tap the plus button in bottom of the screen and browse
the directory where you have downloaded the magisk moudle in step 1. Choose the downloaded files and it will start installing it in a black window. It may take upto 5-10 seconds to install.
Step 3: when installation completes reboot your device and you will see new app installed "Camera" in your device. That is the google camera. It should work flawlessly now.
Note: You can also flash the module via twrp recovery if you know how to do that.
Hit thanks you like my work.
Thanks Mate, I am installing it. And will give you feedback.
P.s. . It is working fine. Thanks developer @rkmadotra
cool, good work OP, this should make it much easier for beginners to install and use the awesome google cam
example picture i just took during dusk attached absolutely amazing picture quality, impossible to get with stock app!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
Omg
Awesoooome
Selfie portrait not working in Miui pro
On my device, when i enter settings it always crashes. Other then this, everything is fine. Thank you
thats the disadvantage of an AIO package: depending on phone model and firmware, a specific GCam port version will work better or worse. so best to try several different GCam versions and check which one works best in your particular situation.
Sent from my Xiaomi Mi Max 2 (Oxygen) using Tapatalk
rkmadotra said:
Hello friends,
Most of you guys should be familiar with Google camera and it's few awesome features like Portrait mode, Lense blur and HDR+ etc. But there is lots of confusion how to install it on your device. You have to go multiple processes to achieve that properly. But when it comes to beginners, it's kinda impossible for them, I mean quite hard. So on request of some of you guys, I have come with all in one package (AIO) of Google camera. Only requirement is magisk must be installed and working properly. So let's start with the process.
If you don't know how to install magisk, head to this thread.
Step 1: download the google camera zip from here, it's packed as a magisk moudle.
Step 2: Open Magisk manager and swipe from left just as you do in most of the apps to see menu options. Choose "moudels" option and you will see all the modules installed if you have any. Tap the plus button in bottom of the screen and browse
the directory where you have downloaded the magisk moudle in step 1. Choose the downloaded files and it will start installing it in a black window. It may take upto 5-10 seconds to install.
Step 3: when installation completes reboot your device and you will see new app installed "Camera" in your device. That is the google camera. It should work flawlessly now.
Note: You can also flash the module via twrp recovery if you know how to do that.
Hit thanks you like my work.
Click to expand...
Click to collapse
Thank you man everything works perfectly
Ah, finally an easy way.
Good job, works great on my Mi Max 2.
Thanks a lot. Easier than have to flash again TWRP.
Thanks mate..it work...
Anyone else has a sound delay with the slow motion camera? The sound always keeps playing after the video ended, I had this bug in another gcam version also
Hello sir,do you know where can i install dolby atmos for mi max 2?thank
Thank u...
This is awesome..
rkmadotra said:
Hello friends,
Most of you guys should be familiar with Google camera and it's few awesome features like Portrait mode, Lense blur and HDR+ etc. But there is lots of confusion how to install it on your device. You have to go multiple processes to achieve that properly. But when it comes to beginners, it's kinda impossible for them, I mean quite hard. So on request of some of you guys, I have come with all in one package (AIO) of Google camera. Only requirement is magisk must be installed and working properly. So let's start with the process.
If you don't know how to install magisk, head to this thread.
Step 1: download the google camera zip from here, it's packed as a magisk moudle.
Step 2: Open Magisk manager and swipe from left just as you do in most of the apps to see menu options. Choose "moudels" option and you will see all the modules installed if you have any. Tap the plus button in bottom of the screen and browse
the directory where you have downloaded the magisk moudle in step 1. Choose the downloaded files and it will start installing it in a black window. It may take upto 5-10 seconds to install.
Step 3: when installation completes reboot your device and you will see new app installed "Camera" in your device. That is the google camera. It should work flawlessly now.
Note: You can also flash the module via twrp recovery if you know how to do that.
Hit thanks you like my work.
Click to expand...
Click to collapse
Wonderful. It's Perfect work. I used on EU rom 9.5.5.0 Stable.
Awesome! It works perfectly on my Mi Mix 2!
Cheers!
Yes, it's working great..Only issue is receiver of Video call over VoLTE from stock dialer is not able to see me.
Strange...Any fix for that..!
Thanks for the mod
Working like a charm on Mi Mix 2 MIUI 9.5.8
Nice picture quality... works here
Can we install gcam from arnova by uninstalling the skullshady one.