First, all the credit goes to Dhananjay for he's tutorial and zhuhang for create this great app.
Disclaimer
Installing mods on your Android device may leave it non-functional or even soft-brick it. DroidOrigin will not be responsible if anything such happens. Recovering is easy however, and we will definitely help you.
Before You Begin
- To install V4A, you must have a rooted phone. If you haven’t rooted yet, you can check for your device in our Rooting section.
- Make sure no other audio mods are installed, like AudioFX. If there is, you will need to remove it completely. If you have problems doing so, use Titanium Backup for.
- Also, you must have BusyBox installed on your ROM. You can download it by clicking the link below. (You can try other busybox installer apps, but if you face issues while installing V4A drivers, you must install this one.)
https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=fr
In case the driver installation fails – It seems like some manufacturer specific devices require SELinux status to be set as Permissive. You can use SELinuxModeChanger app to do the required. Thanks to our reader — Avip, for notifying this.
Steps to Install ViPER4Android on Marshmallow:
1. Go to the V4A website and download ViPER4Android FX, or direct link : http://www.mediafire.com/?ar5men9o5ar7inb
2. Move the downloaded ViPER4Android_FX_v2401_A4.x-A6.x.apk to the phone’s storage.
3. Make sure, you have enabled Unknown sources in Settings > Security.
4. Now, using a file manager (e.g Solid Explorer), install the apk manually, as you normally would do.
5. Once it has been installed, go to app drawer and run ViPER4Android FX.
6. When you will run the app for the first time, it will prompt you to install V4A drivers on your device, so tap on Yes. As soon as you tap, you will have to grant root permissions, so choose GRANT.
7. V4A app will automatically detect the system and install appropriate drivers for the mod to work properly, and upon completion, the following message will be displayed: ‘Driver installed, please reboot your device’. And now as advised, reboot your phone/tablet (I hope you know how to do that!).
8. When the device has rebooted, again launch ViPER4Android FX app.
9. Tap on the 3-dot menu button on the top-right of the app, and select Driver Status. It should display Status: Normal.
If the driver installation fails, read the last point of the ‘Prerequisites’.
10. Start using ViPER4Android now! Tweak the settings to best match your phone and output device. Are you using specific profiles for your phone? Post them below and share it with other users.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Here my setup for Shuttle+ and Headset Shure SE215 :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Status is Normal but two are not enabled. Is this correct? Not noticing an impact to audio throught my Sennheisers.
I think you have to disable audio fx or music fx.
rYz11 said:
Status is Normal but two are not enabled. Is this correct? Not noticing an impact to audio throught my Sennheisers.
Click to expand...
Click to collapse
Enable : no, is not good should be yes and processing : no is ok for me.
You should have Music FX or Audio FX remove like say Vicky90.
You can use Titanium Backup to completely remove it.
You absolutely must remove Audio tweaking stuff what is in your Rom.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Vink67 said:
Enable : no, is not good should be yes and processing : no is ok for me.
You should have Music FX or Audio FX remove like say Vicky90.
You can use Titanium Backup to completely remove it.
You absolutely must remove Audio tweaking stuff what is in your Rom.
Click to expand...
Click to collapse
I can't find any Music FX or Audio FX in app drawer, using Titanium or manually looking through data and priv-app folders. Weird. I'm running Overdrive 's MM ROM v. 9 and Beastmode 56.8 kernel. No other audio mods installed or enabled. I'll keep digging...
@rYz11 then make sure busybox installed and change selinux mode to permissive if not set.
vicky90 said:
@rYz11 then make sure busybox installed and change selinux mode to permissive if not set.
Click to expand...
Click to collapse
Thanks. Yes, stericson busybox is installed and updated and I'm running a permissive kernel (Beastmode 56.8). I'm noticing slight gain so I'll keep playing with it and ignore the not enabled messages.
rYz11 said:
Thanks. Yes, stericson busybox is installed and updated and I'm running a permissive kernel (Beastmode 56.8). I'm noticing slight gain so I'll keep playing with it and ignore the not enabled messages.
Click to expand...
Click to collapse
Well, major "d'oh!" moment - was checking driver status with no music playing. Thanks to @stueycaster for common sense suggestion.
rYz11 said:
Thanks. Yes, stericson busybox is installed and updated and I'm running a permissive kernel (Beastmode 56.8). I'm noticing slight gain so I'll keep playing with it and ignore the not enabled messages.
Click to expand...
Click to collapse
Well, what version of busybox do you install ? The one I give the link ? Because other don't work for me.
And Enable should be yes because if not ViPER4Android shouldn't work.
Maybe if you are any audio tweaking stuff in your phone/Rom it's kernel fault who use audio mod. And are you using Xposed ? Because that could be bad too.
But I don't know the ROM and kernel you are using so it's difficult to help.
I have for long time stay away of ViPER4Android because I was thinking it was another illusion of sound quality, but good install and well configure, WOW !
Sorry bro, can't help much.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
Vink67 said:
Well, what version of busybox do you install ? The one I give the link ? Because other don't work for me.
And Enable should be yes because if not ViPER4Android shouldn't work.
Maybe if you are any audio tweaking stuff in your phone/Rom it's kernel fault who use audio mod. And are you using Xposed ? Because that could be bad too.
But I don't know the ROM and kernel you are using so it's difficult to help.
I have for long time stay away of ViPER4Android because I was thinking it was another illusion of sound quality, but good install and well configure, WOW !
Sorry bro, can't help much.
Click to expand...
Click to collapse
Np, all is good now as long as I remember to check driver status when music is playing.
I already had busybox installed, I made sure it was updated. FYI - I'm running Overdrive's MM Rom (T-Mobile Note 4) with Beastmode 56.8.
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
dd98 said:
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
Click to expand...
Click to collapse
Thx bro, but don't have problem [emoji4]
rYz11 said:
Np, all is good now as long as I remember to check driver status when music is playing.
Click to expand...
Click to collapse
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
dd98 said:
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
Click to expand...
Click to collapse
Thx bro but I don't have problem [emoji4]
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
rYz11 said:
Np, all is good now as long as I remember to check driver status when music is playing.
Click to expand...
Click to collapse
Nice ! Happy it will work.
Sent from my MotoG3 using Optimus-r12 on Ubertc RR Rom.
dd98 said:
@Vink67 I have tried this (Open Source Version) and it does everything for you (even if SELinux is enforcing) and is easier in my opinion
Click to expand...
Click to collapse
That was the only way I could get it working for me. With the app of the OP, everything goes OK, and driver status enabled, etc., but it hasn't any effect in sound.
I have stock rom+kernel, but with exposed and gravity box.
A much easier way to install Viper is in this thread:
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Just download Viper stock 5.4 zip, flash in recovery and voila! No need to mess with the selinux changer app or do anything else.
Hedied4me said:
A much easier way to install Viper is in this thread:
http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Just download Viper stock 5.4 zip, flash in recovery and voila! No need to mess with the selinux changer app or do anything else.
Click to expand...
Click to collapse
It's not the same version but it work yes.
Sent with my MotoG3 from another galaxy !
Vink67 said:
It's not the same version but it work yes.
Sent with my MotoG3 from another galaxy !
Click to expand...
Click to collapse
Its 2.4.0.1 which is the most up to date version of v4a. I was only suggesting it because you don't have to use selinux mode changer app, which is dangerous for security reasons. Not to mention the zip takes care of everything for you.
Sent from my MotoG3 using XDA Labs
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Based on Official MIUIAndroid 3.9.13 Release
[*]Full Multi Language Support
GearKernel 1.0.8s Exclusive for MIUI (Support added in Ramdisk)
No CPU UI Acceleration (only GPU is used, in all the ROM)
Android 4.2 Camera
Latest Google Apps Included
Spirit FM Radio built-in (if u want to use it u must add an init.d script)
Removed useless stuff
Android 4.2 Keyboard
GearTools full working
Optimized all APKs (no compression and maximum speed)
Tweaked to the MAX
Init.d Scripts for ZipAlign, Database Optimization and GearTweaks
Using latest sources for GPS and Camera
Enhanced Video/Photo Quality
OTA Updates
AriesParts now built-in (with vibration intensity change, tv-out support...)
Blocked ADs
Google DNS used by default
SuperSU instead of MIUI Root Permission Management (working bad with many apps)
Using lots of 4.3 Stuff
Newer GPS Libraries (needs testing)
Maybe more i don't remember
Click to expand...
Click to collapse
Changelog 3.9.13:
Full MultiLanguage Support
Fixed GearTools bug (using SuperSU as root management app)
OTA Updates
Added AriesParts
Update to 3.9.13 Base MIUI
Vibrant and Captivate Support
Maybe other i don't remember
Click to expand...
Click to collapse
Screenshots
Downloads:
3.9.13 ROM
3.9.13 Mirror
I9000B Patch
Captivate Patch (needs testing)
Vibrant Patch (needs testing)
OLD
3.9.6 ROM
NavBar Enabler (48 & 40 dpi)
I9000B Patch
Click to expand...
Click to collapse
Installation Guide:
Update Installation (if coming from a previous release):
Copy the Archive to your preferred Storage (internal/external)
Wipe Cache
Wipe Dalvik Cache
Format /system
Install the ROM
[ONLY FOR I9000B/Captivate/Vibrant] Install Patch
Reboot Phone
Full Installation (if coming from some other rom):
Copy the Archive to your preferred Storage (internal/external)
Wipe Data/Factory Reset
Format /system
Install the ROM
[ONLY FOR I9000B/Captivate/Vibrant] Install Patch
Reboot Phone
Click to expand...
Click to collapse
Credits:
MIUI
Google for Android
Many others
Click to expand...
Click to collapse
Thanks for your great work in keeping the vibrant alive. I will try this out when I get some time. You are very appreciated.
GearUI ROM Download Links Fixed without device check bug
My big big big FAIL. In Device Patch i left format /system -.- So every time you flash the device flash system contents will be deleted and of course phone won't boot -.-
Uploading a working patch xD
Working patches are up. Same links as before but archive script is different.
Sorry for before
Enjoy!
Thanks for picking this up if you plan on maintaining development I will leave miui with you.
Sent from my Nexus 4 using Tapatalk 4
What init.d tweaks are needed to make spirit FM work?
Sent from my Xoom using Tapatalk 4
No radio fm hardware available for vibrant. I left this feature also on this thread because I copied Galaxy s i9000 thread. In next version I will add a remove feature to device patches.
Sent from my GT-I9500 using Tapatalk 4
Installed per directions, lost root, Super user su needed updating, couldn't update, recovered to nandroid.
Reinstalled with Superuser SU per Dougfresh's advice. Everything booted well, could not connect to TMobile. Lost IMIE, went stock and back to CM10.1 will try again when I don't need my phone.
Sent from my SGH-T959 using XDA Premium 4 mobile app
You need to reflash a SU like this: http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
Anyone else having issues with in call volume? I don't get anything.
Sent from my GT-I9000 using Tapatalk 4
Cooptx said:
Anyone else having issues with in call volume? I don't get anything.
Sent from my GT-I9000 using Tapatalk 4
Click to expand...
Click to collapse
Mine starts with airplaine mode straight after flashing, no sound. Tried other kernels, still the same.
ioancr said:
Mine starts with airplaine mode straight after flashing, no sound. Tried other kernels, still the same.
Click to expand...
Click to collapse
It is normal, i disabled all sounds and enabled airplane mode as default settings. If u disable airplane mode and enable all u want in settings all should work.
For in-call audio don't know, its a bit strange .....
Alberto96 said:
It is normal, i disabled all sounds and enabled airplane mode as default settings. If u disable airplane mode and enable all u want in settings all should work.
For in-call audio don't know, its a bit strange .....
Click to expand...
Click to collapse
Yes, it was just a toggle (however it took quite a bit to figure out that THIS was causing also the "SIM not found" message during the setup wizard; one also cannot toggle off the airplane mode until the wizard is done; maybe it's only my phone )
I have found the culprit causing no in-call sound, if OP allows, I'll add the link to the working patch here (with fixed Su, now the stock Permission works with pop-ups, also GearTools seems ok )
Good job!
ioancr said:
Yes, it was just a toggle (however it took quite a bit to figure out that THIS was causing also the "SIM not found" message during the setup wizard; one also cannot toggle off the airplane mode until the wizard is done; maybe it's only my phone )
I have found the culprit causing no in-call sound, if OP allows, I'll add the link to the working patch here (with fixed Su, now the stock Permission works with pop-ups, also GearTools seems ok )
Good job!
Click to expand...
Click to collapse
Ok, u can attach it here in thread
Thanks for your help in testing
Fixed patch:
here
Does this replace the original patch or in addition to?
Sent from my SGH-T959 using XDA Premium 4 mobile app
livbean said:
Does this replace the original patch or in addition to?
Sent from my SGH-T959 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It has all the files the original patch had PLUS some audio libraries added from a working Vibrant port AND replaces Su binnary in xbin folder. Hence it fixes no in-call sound issue and root problems with previous patch. Now the stock Permission Manager should be fully working, no more need for SuperSu app.
After a day of use I can say the same as some time ago with early Miui v5 builds: they are less smooth than Miui v4.1, unfortunately. Beautiful, for sure, but it is not enough (for now).
Hoewever I pray the OP to continue his work, I will be testing your builds as they come. Thank you so much!
ioancr said:
After a day of use I can say the same as some time ago with early Miui v5 builds: they are less smooth than Miui v4.1, unfortunately. Beautiful, for sure, but it is not enough (for now).
Hoewever I pray the OP to continue his work, I will be testing your builds as they come. Thank you so much!
Click to expand...
Click to collapse
Unfortunately more i can't do. MIUIv5 have lots of heavy stuff and our phone can't do more. The only solution (not so good) is removing many miui apps but this is useless and you can install a cm based rom if u want something really light without useful apps :/
Maybe when miui will be based on android 4.3 we will gain more performance but for now, its near the limit
" You need to install the viper for lollipop apk and install the driver. Install SELenix mode changer and change to permissive. That should be all you need, but if it doesn't work go to developer options and check use nuplayer..." - Swizzle 82
VIper4Android DL Link
Here is the post about SELinix Mode Changer! All credit to respective devs! While you are there thank em!
Once I am able to post Images and Link I will update this with pictures and DL links!
I have Viper4Android working with busybox working!
All credit goes to Swizzle 82 in the T-mobile G4 Forums. I would have linked to it directly, however as I am not at the maximum posts yet to do that I can not.
So this is going to be a step by step guide as best as I can do without being able to link anything yet.
1.) Install Viper4Android ( A quick google or XDA search will bring you right to where you need to be DL link up in top post, and while it's downloading PLEASE Thank ZhuHang)
2.) Run Viper4Android, This will prompt you to make a few selections such as audio quality, READ EACH DESCRIPTION CAREFULLY! Make audio selection.
2a.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2b.)
2c.)
3.) Viper4Android will prompt you to install drivers, continue, it will then inform you do not have busybox installed (If you don't have it installed).
3a.)
4.) Select yes to install Busybox, Should take you to the PlayStore with BusyBox. Tap Install and wait for it to complete.
4a.)
4b.) Open Busybox app and wait for smart install ( This was how I installed it)
4b.) Continue with install once it's is all loaded.
5.) Open up Viper4Android, Tap the options Dots ( 3 vertical dot in upper right hand corner), Select install drivers, Make selection for audio quality again. Let drivers install.
5a.)
5b.)
6.) Head over to settings for your device, Tap General, then navigate to Developer Options. Scroll Down to Media and Check "Use Awesome Player"
6a.)
6b.)
7.) Restart Device and Enjoy Tinkering with your audio settings.
7a.) If it isn't working head to the options in Viper4Android and select FX Compatible
ALL CREDIT GOES TO RESPECTIVE DEVS AND POSTERS! I TAKE NO CREDIT FOR CREATING ANY APP OR PROGRAM USED TO ENABLE VIPER4ANDROID!
If this has any errors or needs Clarification please let me know! I made this from memory, If I missed any steps please let me know.
Works beautifully, thanks!
For some reason, I cannot get this to work on my device. I did all of the steps in the post, including enabling awesomeplayer, and I notice no difference between stock audio and V4A. I installed the A4.x apk from the V4A zip.
ironbesterer said:
For some reason, I cannot get this to work on my device. I did all of the steps in the post, including enabling awesomeplayer, and I notice no difference between stock audio and V4A. I installed the A4.x apk from the V4A zip.
Click to expand...
Click to collapse
What music app are you using?
tabp0le said:
What music app are you using?
Click to expand...
Click to collapse
I'm using the stock LG player.
Sent from my LGLS991 using Tapatalk
ironbesterer said:
I'm using the stock LG player.
Sent from my LGLS991 using Tapatalk
Click to expand...
Click to collapse
I use Play Music
Same issues but i use gonemad, works on my n5.
Only Google Play Music works for me, can't get it to work with Spotify. I read that making Spotify a system app might make it work but haven't been able to, it just deletes the app from my phone or it doesn't open.
shahran said:
Only Google Play Music works for me, can't get it to work with Spotify. I read that making Spotify a system app might make it work but haven't been able to, it just deletes the app from my phone or it doesn't open.
Click to expand...
Click to collapse
Sorry for the late reply here, I have no problems using spotify with Viper? Have you solved the issue or gotten it to work?
Onclot said:
Sorry for the late reply here, I have no problems using spotify with Viper? Have you solved the issue or gotten it to work?
Click to expand...
Click to collapse
I have not, not sure what I can do to make it work. Loving this on gplay music though, like I'm hearing music for the first time, sounds so much better.
Hi, do I need to root my LG g4 to get viper to work?
Klobue said:
Hi, do I need to root my LG g4 to get viper to work?
Click to expand...
Click to collapse
Yeah Root is req
Not working with LG stock music player. Followed all the steps, even FX compatible mode. The equalizer from the music player must be set to normal, I guess?
bel57 said:
Not working with LG stock music player. Followed all the steps, even FX compatible mode. The equalizer from the music player must be set to normal, I guess?
Click to expand...
Click to collapse
Installed all the apps? (Busybox, SELinux Mode Changer)
Went to dev options under device settings and selected use AwesomePlayer?
Tried reinstalling Busybox and V4A after a restart?
Selected the force V4A option under V4A app?
I uninstalled the driver and V4A app, then flashed the zip a fellow linked in some related post. Works fine now :victory:
Can you please post that zip link, please?
Jessooca said:
So viper works on Android 5.1+ I was just looking for an audio boost for my Tab Pro 12.2 Running cm12.2 and all I found was it only works on Android 5.0 and below.
Thanks for sharing this, hopefully it'll fix my only issue on my tablet. My G4 has no issues as of yet.
Click to expand...
Click to collapse
I have it running on my G4 just fine. This may be a question for the creator of V4A, or at least that forum post. The link to it is in the OP. Good luck
V4A works with the stock music player but for some reason it doesnt work with jetAudio player. Did anyone get it to work with jetAudio player? i really liked this player on my old phone but just tried it out and V4A wasn't working with it. Ive tried to force v4a in the settings without any luck.
I have been trying to get this to work all week with multiple apps. Including Play music, spotify & system music player. No luck. Just keep getting drivers need to be installed nonsense. I install it tells me to reboot. I reboot start Viper & get... you guessed it!!! Drivers need to be installed! I have followed all the steps perfectly, over & over again. Please help. I have also installed Viper as a system app. No luck. Ran from both SD card & internal mem. No luck. Any ideas at all?
musiqlives said:
I have been trying to get this to work all week with multiple apps. Including Play music, spotify & system music player. No luck. Just keep getting drivers need to be installed nonsense. I install it tells me to reboot. I reboot start Viper & get... you guessed it!!! Drivers need to be installed! I have followed all the steps perfectly, over & over again. Please help. I have also installed Viper as a system app. No luck. Ran from both SD card & internal mem. No luck. Any ideas at all?
Click to expand...
Click to collapse
Did you install all listed apps? Busybox? SELinixmode changer? Is the phone rooted? I am sorry for asking what may seem like redundant questions.
Collection of modules for @topjohnwu's Magisk!
General Information
I wanted to make a single thread where everyone can contribute and add modules to serve as a one stop shop for modules until the Magisk Manager gets an xposed-like module downloader. All files are attached in the order that they are introduced.
My Modules
Busybox Installer - Credits: YasadSharaf for the binaries
The installer detects what architecture (ARM/ARM64, x86/x86_64, MIPS/MIPS64) your device uses and installs the correct busybox binary accordingly.
Better Battery Stats Installer - Credits: @JudgeDread11
The installer systemless-ly installs the Better Battery Stats app.
Screen Density Changer - Credits: @JudgeDread11
The zip changes your screen density systemless-ly, extract the zip to set the value that you would like.
Debloater - Credits: @JudgeDread11
The zip debloats your ROM, he uses for Asus Zenfone 2 could probably be adapted to many more devices.
Mount Magisk
The simple script mounts the magisk.img to /magisk to allow it to be edited in case a module or script is causing a bootloop.
ViPER4Android Installer - Credits: @topjohnwu edit by me
The installer systemless-ly installs the ViPER4Android app as well as the driver. Detects and supports the x86 V4A driver. It uses the material design version 2.3.4.0 because it is of higher quality than 2.4.0.1. Two zips, one for dark theme and other for light theme.
Ad-Block Installer
The installer systemless-ly installs my ad-blocker, which supports updating by running hosts as root in terminal. The updater utilizes a wget port to android. The entire hosts file is 18 MB and has over 600k unique entries. Hosts is located at GitHub.
Liveboot Installer - Credits: @topjohnwu edit by me
The installer systemless-ly installs the LiveBoot app and script. Credits to @topjohnwu for this one I just edited the settings to the way I prefer it. Two zips, one with boot logs and one without both have 60 lines as default.
Credits & Thanks: Mainly @osm0sis for his awesome odds & ends thread that I used as a template and @topjohnwu for Magisk. Also everyone else who has contributed in any way to installer scripts for various mods, I've tried to include your name by the module you contributed to.
Disclaimer: Naturally, you take all the responsibility for what happens to your device when you start messing around with things.
Contributing: Post a reply with your module attached or a link to it with a short description. I'll add it to the OP with credits and a link to your post. Or even post ideas for modules!
Source Code:Working on it.
These are all very simple modules, but good for noobs like me, who would like some examples.
A better battery stats systemless system app
The sample from the magisk thread, changing screen density by script.
And a sample for a de-bloat module that I use on stock Asus Zenfone 2 laser.
JudgeDread11 said:
These are all very simple modules, but good for noobs like me, who would like some examples.
A better battery stats systemless system app
The sample from the magisk thread, changing screen density by script.
And a sample for a de-bloat module that I use on stock Asus Zenfone 2 laser.
All coming soon, on the road and I keep getting failure to upload.
Click to expand...
Click to collapse
Nice man! Yeah I whipped these up relatively quickly just trying to get some out there, working on an Aroma that lets you choose the density you'd like to change to. :good:
thanks for this. it seems that for me, V4A installs fine, but when i go to use it, it does not work. I did not install the drivers within the app, pretty sure you're not supposed to right?
also, installed the new adblocker and i can't seem to disable it still:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
steveo17 said:
thanks for this. it seems that for me, V4A installs fine, but when i go to use it, it does not work. I did not install the drivers within the app, pretty sure you're not supposed to right?
also, installed the new adblocker and i can't seem to disable it still:
Click to expand...
Click to collapse
What does it say when you open it?
RatchetPanda said:
What does it say when you open it?
Click to expand...
Click to collapse
Sent from my Nexus 6P using Tapatalk
Try these or whichever one you used
removing/disabling modules?
Hi,
I was wondering what the process is for removing modules since there isn't a manager like there is for xposed? Please let me know when you have a moment.
Thanks
RatchetPanda said:
Try these or whichever one you used
Click to expand...
Click to collapse
the drivers seem to be installed now. no prompt at startup to install drivers, but it still does not appear to be working. i've tried toggling effects via bluetooth and wired headphones and neither work.
I'm on a Nexus 6P, encrypted, Android N Official, Magisk v6, selinux enforcing
kryptikal said:
Hi,
I was wondering what the process is for removing modules since there isn't a manager like there is for xposed? Please let me know when you have a moment.
Thanks
Click to expand...
Click to collapse
Open up the /Magisk folder and delete the module folder that you don't want.
steveo17 said:
the drivers seem to be installed now. no prompt at startup to install drivers, but it still does not appear to be working. i've tried toggling effects via bluetooth and wired headphones and neither work.
I'm on a Nexus 6P, encrypted, Android N Official, Magisk v6, selinux enforcing
Click to expand...
Click to collapse
Play music after you've changed settings and then tap driver status and screenshot it. I'm pretty sure Android N needs permissive.
RatchetPanda said:
Open up the /Magisk folder and delete the module folder that you don't want.
Click to expand...
Click to collapse
Or if you afraid things go seriously wrong when you delete something that is essential in your running system add a file called remove to the mod folder. The mod will be removed on the next reboot.
JudgeDread11 said:
Or if you afraid things go seriously wrong when you delete something that is essential in your running system add a file called remove to the mod folder. The mod will be removed on the next reboot.
Click to expand...
Click to collapse
How would u accidently delete something essential if your in the Magisk folder? This works too but the reasoning behind it doesn't make sense, your nowhere near deleting anything 'essential' while in the /magisk folder.
RatchetPanda said:
How would u accidently delete something essential if your in the Magisk folder? This works too but the reasoning behind it doesn't make sense, your nowhere near deleting anything 'essential' while in the /magisk folder.
Click to expand...
Click to collapse
From my understanding you can change anything in the system folder, and i believe there is some essential stuff in there. When you run a mod that changes this stuff the files in the mod folder are the files the system is linked to. So removing these files on the fly would have the same result as removing the files on the fly in an unmodded system.
I might be wrong. But I'm learning
RatchetPanda said:
Play music after you've changed settings and then tap driver status and screenshot it. I'm pretty sure Android N needs permissive.
Click to expand...
Click to collapse
No difference. Music is playing, with permissive via Magisk Manager
Sent from my Nexus 6P using Tapatalk
steveo17 said:
No difference. Music is playing, with permissive via Magisk Manager
Click to expand...
Click to collapse
had this problem too
installing v4a apk v2.4.0.1 fixed this
Sent from my SHIELD Tablet K1 using XDA Labs
mati_boy said:
had this problem too
installing v4a apk v2.4.0.1 fixed this
Sent from my SHIELD Tablet K1 using XDA Labs
Click to expand...
Click to collapse
From the magisk thread?
Sent from my Nexus 6P using Tapatalk
steveo17 said:
From the magisk thread?
Click to expand...
Click to collapse
no, from the material design v4a thread
http://forum.xda-developers.com/android/software/app-material-viper4android-2-3-4-0u-t3190352/page45
Sent from my SHIELD Tablet K1 using XDA Labs
mati_boy said:
no, from the material design v4a thread
http://forum.xda-developers.com/android/software/app-material-viper4android-2-3-4-0u-t3190352/page45
Sent from my SHIELD Tablet K1 using XDA Labs
Click to expand...
Click to collapse
yep that did the trick!
thanks!
mati_boy said:
had this problem too
installing v4a apk v2.4.0.1 fixed this
Click to expand...
Click to collapse
I'll switch to that apk in the script :good:
Huawei P8 Custom Rom GRA-L09-TL00-CL00-UL00-UL10-TL10-CL10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Continuation of the popular Custom Rom of Senior Member @BlackballSpecial thanks to Blackball: http://forum.xda-developers.com/huawei-p8/development/rom-huawei-p8-fromfuture-gratitude-t3393699/page10
* Gratitude Version 5.0 by Tecalote *Choose one of 3 Editions:
Thread for German Users: http://www.android-hilfe.de/thema/huawei-p8-rom-6-0-gratitude-v5-by-tecalote.794406/
Please check always MD5 Checksum after downloading the Rom on SD-Card before flashing!
Fixes for all Editions of Gratitude 5 (but not for Gratitude 4.x): Please install the zip with TWRP after flashing the Rom and booting up first time into the System and making the first set up. If you are already using Gratitude 5 you can just flash it. Download: https://www.androidfilehost.com/?fid=673368273298917576 MD5: 967c09e60da619f86bcd53c03a8367af
1.) Gratitude-5-Classic-Edition: The known Custom KangV-Rom like Gratitude 4.1
with Call-Recording - K-Settings - Restart-Menue to Recovery, Bootloader... and much more - special thanks to KangV and the Huawei Rom Team - Donation: https://www.paypal.me/KangVIP
Firmware Base b366_v2 - deodexed - Kernel with adb (secure) and intit.d Support - Kernel is ready for every update with future Versions of SuperSU - NFC - Permission Manager - Messages on the Lockscreen
DOWNLOAD: https://www.androidfilehost.com/?fid=385035244224403211
MD5: c8745dbaa2f7368bc99ca9ae7b315a9e
Changelog:
prerooted with SuperSU 2.78 SR4 (in System-Mode) - BusyBox 1.25.1 from xda-developer @YashdSaraf - special thanks to him and Chainfire!
Dolby/Atmos (on Homescreen) and Viper4Android now in K-Settings - More settings - Viper4Android (new Version)
583 Apps working in Dual-Window-Mode (in all versions) Please dont use more than 2 apps together with this mode. The first inital start can look like - see post: http://forum.xda-developers.com/showpost.php?p=69928039&postcount=199 - just reboot, after it should work.
MiXplorer - Root Explorer with Material Design from xda-developer HootanParsa - It is a powerful Explorer, you have just to do three things: In left menue go to Root / and grant Root permissions and in the right menue go to: show hidden files. After go in the left menue to Ext SD and create there a new folder - you must configure MiXplorer now the permissions for external SD - thats all. Now you can do a lot of things. MiXplorer includes MD5 Check, you can change permissions of files, you can edit files (like notepad++) and much more. In settings you can change the language and install plugins (attention by downloading plugins - always for arm64). E-Book Reader plugin is includet - special thanks to @HootanParsa!
TitaniumBackup is preinstalled - AdAway (new Version 3.2 Thread) - completely current GoogleApps - and BlackPlayer for perfectly sound with Dolby (Atmos/Viper) and no more additional Apps with the exception of included Huawei Apps
Xposed Framework Custom Build by Wanam v87.1 - included in K-Settings - Xposed Settings (install and uninstall from this menu!) - now with Material Design Installer! - special thanks to @wanam and @rovo89
Huawei-ID must be installed in order to download Online-Themes
2) Gratitude-5-no-Root-Edition2: Special Edition for users with safetynet problems (dont know if it helps, but if it does please report)
DOWNLOAD: https://www.androidfilehost.com/?fid=457095661767120603
MD5: e1847dd0a4ee4942894a40cbaeb5badc
Changelog:
not rooted - but working Call-Recorder, working Dolby/Atmos and Viper4Android - special thanks to @guitardedhero (Viper/Atmos)
most of K-Settings are working with the exception of some (which would need Root permissions, like flash recovery) - so only a simular Stock-Rom with some specials
3.) Gratitude-5-Magisk-Edition2: The same KangV-Rom but with systemless Root
DOWNLOAD: https://www.androidfilehost.com/?fid=313042859668276865
MD5: 6a38058fc8b7cdc0a3184604cc68685d
Changelog:
Magisk v9 from xda-developer topjohnwu preinstalled and prerooted with phh superuser - special thanks to @topjohnwu!
Note: After first setup please install latest Magisk Manager Download: http://tiny.cc/latestmanager This is the only App which cannot be included - because of special code cache - it must be installed by the user! Soon as you have installed this Manager - superuser ask you - grant Root Permission to Magisk and grant Permission for MM in the next window. After you will see Magisk is correctly installed.
Go to settings /module - phh´s SuperUser is installed, go to settings /Downloads: From MagiskManager you can install:
Sonys Framework and systemless Xposed Framework 87 and Pixel Launcher (for activation or deactivation Pixel Launcher go after installing to Settings /Apps / Advanced /Standard-App Settings)
Material Design Xposed Installer is onboard from xda-developer: DVDandroid - but dont install the framework from here, install it from MagiskManager.
As soon you have it installed, you can open the Material Design Xposed Installer - systemless Xposed Framework is active. With this installer (is included in the Rom) you can download and manage your modules. - special thanks to @DVDandroid!
Important tip: If you want to restore a Nandroid Backup of a none Magisk-Version (Gratitude 4.1, Gratitude 5 Classic Edition) - you must do following steps before:
be sure to uninstall phh Superuser first - flash unsu.zip (Download: http://forum.xda-developers.com/showpost.php?p=63615067 )and directly after flash Magisk-uninstall.zip (Download: http://tiny.cc/latestuninstaller)
If you have done this two steps you can restore a Nandroid Backup of another Rom. If you dont do this steps, the restoring will not be without faults.
Requirements for Gratitude-ROM:
Marshmallow Firmware (Android 6.0 Bootloader) or any 6.0 Custom Rom of @Blackball (ROM cannot be flashed on Lollipop based Roms!)
Unlocked Bootloader: http://emui.huawei.com/en/plugin/hwdownload/download
TWRP 3.0.2.0 released 2016-11-14 by KangV - Some more Information: http://forum.xda-developers.com/showpost.php?p=69622679&postcount=136
Download TWRP: https://www.androidfilehost.com/?fid=529152257862681510
Installation:
Clean Installation with Fullwipe is recommended (Backup your data, boot to TWRP, go to Wipe /Advanced Wipe and format Dalvik/ART Cache, Cache, System and Data - NOT the Internal Memory)
Dirty Flash is possible:
backup your converted System-Apps first (System will be formated during flashing) and wipe immediately after installation BEFORE Reboot Dalvik and Cache (TWRP left next to Reboot-Button)
The Installation needs about 2 Minutes, the Reboot needs about 10 Minutes (clean install) and with dirty flashing the Reboot needs about 15 Minutes
To switch of chinese Letters - go to K-Settings, in there to Notification Settings/Show statusbar lunar - disable it. After to Lockscreen und desktop settings/Lunar calender + Desktop wheather lunar - disable it.
Push-Notifications
The Push-Notifications are working for sms, mms, email.... But for WhatsApp, Viber, Skype and other Chat/Net-Call Apps the push-notifications work only perfectly if you convert them into a system app. You can easily do this with Link2SD. Link2SD give you a list of all Apps - for example "WhatsApp" - just press long on it and you get a menue - use: convert to system-app. Then reboot your Phone. After you have to authentication WhatsApp again - so make a Google-Drive Backup of the Chat-History before doing this.
Optional Downloads:
Huawei-Swype-Keyboard (flashing in TWRP) Download: https://www.androidfilehost.com/?fid=385035244224387045
To enable go to settings, advanced settings, Language and Input, Standardkeyboard - configure Input Method, enable Huawei-Swype (Google Keyboard must be enabled) after you can change to Swype....
Removal-Tool for this Huawei-Swype-Keyboard: Note: Another keyboard must be installed (but not activated) before removing Huawei Swype.... Example: Google Keyboard installed, but not activated. Huawei Swype activated. Flash zip in TWRP. Download: https://www.androidfilehost.com/?fid=385035244224392930
Have Fun with this Rom
Hello
Dear friend, this ROM is installed on the GRA-UL10 model?
My phone's bootloader is unlocked، TWRP Recovery
Rom B370،EMUI 4.0.1
maxomid said:
Hello
Dear friend, this ROM is installed on the GRA-UL10 model?
My phone's bootloader is unlocked، TWRP Recovery
Rom B370،EMUI 4.0.1
Click to expand...
Click to collapse
Hello, I am not sure, but I think it should work on UL10. If you want to try it, make with TWRP a complete Backup of your System, Data, Boot, Recovery...if it dont work you can restore your working Rom. Please post if Gratitude is compatible with UL10 modell
Hey Tecalote, its me again. The problem with atmos/viper is happening again, sometimes processing is working, but mostly its not, even after restart, using stock player... with V3 i never had such problem, just letting you know
Thank you for informing me!
I have no idea yet why this happens. But I will check!
You have that problem with HW Musicplayer or Videoplayer?
Tecalote said:
Thank you for informing me!
I have no idea yet why this happens. But I will check!
Click to expand...
Click to collapse
No problem, i will be testing to figure it out whats the matter, good luck
Sent from my GRACE using Tapatalk
00471 said:
No problem, i will be testing to figure it out whats the matter, good luck
Sent from my GRACE using Tapatalk
Click to expand...
Click to collapse
Do you have that problem with HW Musicplayer or Videoplayer?
Tecalote said:
Do you have that problem with HW Musicplayer or Videoplayer?
Click to expand...
Click to collapse
im using just stock music player, the problem occurs for example, when i stop listening music, i unplug earphones, then few mins later i wanna to listen something again, and then none of those two works (viper/atmos), sometimes when i manually quit all apps and re-launch them, it help, but very rarely (im not sure why is this happening)
EDIT:
Well, something interesting happened, this may help you:
Using stock music player, playing some music, trying switch on/off atmos and viper, nothing worked, so i tried disable DTS in music player, atmos and viper, then switch to next song, and tried to enable atmos, and it worked, then i could enable DTS (didn tried viper :/ ) so i imediately went to PC to inform you, while i was writing, music was paused, now i tried if it still works, and it doesnt DTS is working everytime tho... hope it will help somehow
00471 said:
im using just stock music player, the problem occurs for example, when i stop listening music, i unplug earphones, then few mins later i wanna to listen something again, and then none of those two works (viper/atmos), sometimes when i manually quit all apps and re-launch them, it help, but very rarely (im not sure why is this happening)
EDIT:
Well, something interesting happened, this may help you:
Using stock music player, playing some music, trying switch on/off atmos and viper, nothing worked, so i tried disable DTS in music player, atmos and viper, then switch to next song, and tried to enable atmos, and it worked, then i could enable DTS (didn tried viper :/ ) so i imediately went to PC to inform you, while i was writing, music was paused, now i tried if it still works, and it doesnt DTS is working everytime tho... hope it will help somehow
Click to expand...
Click to collapse
Thank you for the information and testing , as soon I have time, I will check too.
Try to deactivate in Phonemanager Smart Tune Up (Settings-Symbol) Open System Cleaning in this App , go to the settings of it, and deactivate everything in it.
Tecalote said:
Thank you for the information and testing , as soon I have time, I will check too.
Try to deactivate in Phonemanager Smart Tune Up (Settings-Symbol) Open System Cleaning in this App , go to the settings of it, and deactivate everything in it.
Click to expand...
Click to collapse
well, i did everything as you mentioned, but nothing changed, so i decided to try another music player, it looks like in PowerAmp everything works fine, looks like stock player somehow confict with other equalizers, will be testing and keep you updated
Thanks! This would be good, cause it would be easy to make an updated Stock Player
maxomid said:
Hello
Dear friend, this ROM is installed on the GRA-UL10 model?
My phone's bootloader is unlocked، TWRP Recovery
Rom B370،EMUI 4.0.1
Click to expand...
Click to collapse
it works very well on UL10. Just install with MM Rom stock and follow the 1st post instrutions. Excellent ROM, love all the advanced settings. Keep it up.
Just one thing. Does normal Xposed doesn't work? Cause I install the arm64 xposed 86.1 and it doesn't boot, and warm a lot. Which xposed can we install with this ROM?
Cheers
DaveKing said:
it works very well on UL10. Just install with MM Rom stock and follow the 1st post instrutions. Excellent ROM, love all the advanced settings. Keep it up.
Just one thing. Does normal Xposed doesn't work? Cause I install the arm64 xposed 86.1 and it doesn't boot, and warm a lot. Which xposed can we install with this ROM?
Cheers
Click to expand...
Click to collapse
Please don't flash Xposed - I wrote in the OP -
Go to Settings K-Settings Xposed Framework - Install Confirm - Wanams Xposed Framework 86.1 is included and will correctly installed automatically.
The Reboot needs maybe 15-20 min.
You don't need Alpha-Installer, its also included.
Tecalote said:
Please don't flash Xposed - I wrote in the OP -
Go to Settings K-Settings Xposed Framework - Install Confirm - Wanams Xposed Framework 86.1 is included and will correctly installed automatically.
The Reboot needs maybe 15-20 min.
You don't need Alpha-Installer, its also included.
Click to expand...
Click to collapse
Miss that. Thank you very much. This ROM is incredible stable, and very different from Stock. Will install again from the start and follow the instrutions in first post.
DaveKing said:
Miss that. Thank you very much. This ROM is incredible stable, and very different from Stock. Will install again from the start and follow the instrutions in first post.
Click to expand...
Click to collapse
just to tell that say uninstall instead of install on xposed in ksettings, but if you confirm then install the xposed framework right. Thanks for this wonderful work.
Tecalote said:
Thanks! This would be good, cause it would be easy to make an updated Stock Player
Click to expand...
Click to collapse
I can confirm that poweramp worked fine yet, so i guess that there is really problem with music app
00471 said:
I can confirm that poweramp worked fine yet, so i guess that there is really problem with music app
Click to expand...
Click to collapse
This is very good to know. Thanks a lot. So I just look for an updated HW Musicplayer to install...
Hello..
Friends how much score this Rom At Antutu & geekbench?
maxomid said:
Hello..
Friends how much score this Rom At Antutu & geekbench?
Click to expand...
Click to collapse
Does it even matter? Is much better in every way compared to stock, nothing much more to say
00471 said:
I can confirm that poweramp worked fine yet, so i guess that there is really problem with music app
Click to expand...
Click to collapse
Hello Sir, at the moment there is no Dolby compatible Huawei Musicplayer yet for this Rom - but as you said, Poweramp works - and I tested Google Play Music. This works even great together with the Dolby Feature.
Of course, I try to find also a solution for Huawei Musicplayer.
Hey guys!! so earlier I have come up with Dolby Atmos mod for Samsung Nougat devices, but it still bugged me that Viper4Android was not working!! So after countless hours of brainstorming, I finally got viper4android to work on Nougat!!
So here you go!! Also works with my Dolby Atmos!
Tested devices:
- S6 edge+
- Note 5
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
- Samsung device
- Nougat rom (N-lite V3 rom users, please wait for V4 rom. Pre-installed busybox on V3 interferes with viper driver installation)
- Rooted by Magisk (Dolby does not need root. Only viper needs root by magisk)
Installation instructions:
- Flash attached viper zip file and UPDATE zip file in TWRP. Users already using this mod, please see update instructions below.
- Reboot
- Install Busybox by Meefik here - https://play.google.com/store/apps/details?id=ru.meefik.busybox&hl=en
- Open Viper4android app and install drivers if it prompts.
- Enjoy!! Flash DolbyAtmos zip if you want
Update instructions:
- Uninstall Viper4android drivers from the menu in Viper4android app.
- Flash the update zip.
DolbyAtmos thread here: https://forum.xda-developers.com/s6-edge-plus/development/audio-mod-dolbyatmos-t3553494
Download Mirror:
MEGA - Main zip
MEGA - Update zip
Thanks and Credits:
- @CaptainTiiti for the countless hours of support and guidance and motivation, without him, this project would have never made it here
- @topjohnwu for the magisk stuff
- The developers behind Viper4Android
- @worstenbrood for the original dolby atmos mod
- @gtaelbordo for the kindness and support, and for the icons of DolbyAtmos
Hope you like it. Leave a Thanks if you do.
Also join me on telegram chat at https://t.me/su_community
See you soon!
Reserved. Viper4android profiles coming soon here.
Reserved 2
works thanks
Thanks for your mod. Does it work with adapt sound?
Ringo1989 said:
Thanks for your mod. Does it work with adapt sound?
Click to expand...
Click to collapse
In my limited time testing with adapt sound, it does work. if you can, test extensively and report back
CrsMthw said:
In my limited time testing with adapt sound, it does work. if you can, test extensively and report back
Click to expand...
Click to collapse
after testing .. dont work ..after rom Update. which rom do u use?
Sent from my Samsung Pixel XL using XDA Labs
gtaelbordo said:
after testing .. dont work
Click to expand...
Click to collapse
Oh it doesn't? That's weird, I did notice some change in sound, but I didn't bother much cos I found it sounds worse
CrsMthw said:
Oh it doesn't? That's weird, I did notice some change in sound, but I didn't bother much cos I found it sounds worse
Click to expand...
Click to collapse
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
gtaelbordo said:
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
Click to expand...
Click to collapse
so it works until a reboot... after reboot i got the same meessage ... i read it on another thread.. i know the problem but i dont have the knowledge to change it)
Sent from my Samsung Pixel XL using XDA Labs
gtaelbordo said:
after rom Update.(n-lite v2 it works.. but the update to v3 dont) which rom do u use?
Click to expand...
Click to collapse
I am using Dev-base QB4.. Yeah some N-lite users have said that it does not work for them.. Maybe he changed something that is required by viper? I will talk to rainbow_dash and see what's up.
CrsMthw said:
I am using Dev-base QB4.. Yeah some N-lite users have said that it does not work for them.. Maybe he changed something that is required by viper? I will talk to rainbow_dash and see what's up.
Click to expand...
Click to collapse
okay thanks
gtaelbordo said:
okay thanks
Click to expand...
Click to collapse
Okay, so I talked to rainbow_dash and apparently he had some other busybox built into the v3 version of his rom, that's not compatible with viper. And even if you install the meefik one, it reverts back to his busybox after a reboot. And he has agreed to fix that in the upcoming N-lite v4!
CrsMthw said:
Okay, so I talked to rainbow_dash and apparently he had some other busybox built into the v3 version of his rom, that's not compatible with viper. And even if you install the meefik one, it reverts back to his busybox after a reboot. And he has agreed to fix that in the upcoming N-lite v4!
Click to expand...
Click to collapse
okay good to know thanks
Remote service stopped everytime I press back button until open Dolby apps
Sent from my Redmi 3X using Tapatalk
jmmigo said:
Remote service stopped everytime I press back button until open Dolby apps
Click to expand...
Click to collapse
I don't see remote service in my Samsung phone, maybe it's something specific to your phone. Try freezing this remote service using Titanium backup or something like that, if you don't use it...
Hi, thanks for the good work, works perfectly on my rom with Dolby
IZI.Xav said:
Hi, thanks for the good work, works perfectly on my rom with Dolby
Click to expand...
Click to collapse
You are welcome!! Feel free to add both audio mods into your amazing rom if you want, with credits
CrsMthw said:
I don't see remote service in my Samsung phone, maybe it's something specific to your phone. Try freezing this remote service using Titanium backup or something like that, if you don't use it...
Click to expand...
Click to collapse
no, i mean when open dolby atmos, eq work well but if i press back button to back home, dolby atmos not fuction. I ever use Dolby Digital and when pressing back to back home, Dolby eq not fuction and written "remote service stopped". although there is no such statement in your Dolby atmos but it happened exactly. I'm sorry for the misunderstanding and my bad english. btw thanks for your job :good:
jmmigo said:
no, i mean when open dolby atmos, eq work well but if i press back button to back home, dolby atmos not fuction. I ever use Dolby Digital and when pressing back to back home, Dolby eq not fuction and written "remote service stopped". although there is no such statement in your Dolby atmos but it happened exactly. I'm sorry for the misunderstanding and my bad english. btw thanks for your job :good:
Click to expand...
Click to collapse
Oh that's weird..