Looking for flashable system image - MeMO Pad 7 Q&A, Help & Troubleshooting

Hello wonder if anybody can help
I'm looking for a flashable system image for the ASUS ME70CX.
I'm working on a ex-Demo version of the tablet with custom firmware installed for demo usage.
I downloaded the latest firmware from ASUS UL-K01A-ww-12.2.3.28-user.zip
I've erased cache ,userdata and system
From the downloaded firmware I've flashed boot.img ,fastboot.img ,and splashscreen.img
I tried to create a system image using a rooted normal version following online details copying partition mmcblk0p9 and then used sparseconverter to fix a sparse error.
But I get an error says folder not found on the device in recovery (fastboot).
So the first question would be have I copied the correct partition ?
Failing that is there a working system image I can download ?
cheers

Did you find a solution? I tried to update my sons ME170CX/K01A tablet with the download from the Asus website and now it wont boot up. I can get it into droidboot, but dont know what to do from there. I just need to get it working again. I've tried to update with fast boot but it says
error: update package has no android-info.text or android-product text.
I've also placed the update on an SD card and gone to recovery from droid boot but it does nothing.
Any help would be greatly appreciated. I'm just not familiar with using fast boot. I been trying for a couple days now, and I'm not finding what to do from here. Just that i should be able to flash from droid boot.
Edit: I found this
http://forum.xda-developers.com/android/help/instructions-reviving-me170c-me170cx-t3017466
I found the update for the CX/K01A that had the same software image version as listed in the OP and followed every step as described, with the exception of the download and renamed it to K01A_sdupdate. This all started a couple days ago when I replaced the main board because the micro usb port got ripped off the board. I was much cheaper than sending off for repair and easier for me to buy a used unit with a busted screen from eBay. When I got it all together and working it would not update from 4.3, after all I have done and following the instructions here in the OP it is now on 4.4.2. This is right where it was with the original board. Since he only uses it for games and downloaded movies I'm not messing with it anymore now that its working properly. He'll just have to start over with his games.

dave011182 said:
Did you find a solution? I tried to update my sons ME170CX/K01A tablet with the download from the Asus website and now it wont boot up. I can get it into droidboot, but dont know what to do from there. I just need to get it working again. I've tried to update with fast boot but it says
error: update package has no android-info.text or android-product text.
I've also placed the update on an SD card and gone to recovery from droid boot but it does nothing.
Any help would be greatly appreciated. I'm just not familiar with using fast boot. I been trying for a couple days now, and I'm not finding what to do from here. Just that i should be able to flash from droid boot.
Click to expand...
Click to collapse
Assuming it works the same way as the ME70CX.
First is to get the correct firmware version as not all the ones listed are compatible with all versions for a one hit update.
EG the original version I downloaded wouldn't update / install from the SD card but v10.32.1.33.3 will but it'll then update OTA to v11 .
Download the update , extract the zip files until you get to the last one eg UL-K01A-ww-10.32.1.33.3-user.zip
Rename it K01A_sdupdate.zip
This will now update from the SD card.
If you have erased the unit extract the img files from this file and flash them , then update from the SD card and reboot and it'll work again.
But you need the correct version. I went for the one that was installed in another unit or it updated to on it's first update.
So if you can boot the original chassis up and look at the software version then download the closest on to that.
If you do this to an ex-display model it'll still be in Demo mode afterwards but search for ASUS Retail site and it'll tell you everything you ever need to know about their software for retail operation. Same applies to Samsung . Samsung retail website again has everything you'll ever need to know.

Related

[Q] Couldnt Update to Lollipop, LF USA XT1063 Mirror

First of all I just bought Global Moto G 2014 (XT1063) from US Amazon and that was KXH21.85-23 (not updatable to Lollipop via shared OTA.)
So I did manage to unlocked the bootloader and flashed KXH21.85-17 and tried to flash the "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US" which supposed to flash the Lollipop.
Unfortunately at first it failed to update me because "Printspooler.apk" mismatch the hash check. After attempt to flash (yes, I ignore the abort message and redo the process, It passed.... I don't know why) and stuck at some "xxx.apk" mismatch the hash again. After redo the process and bypass (for unknown reason that redo bypass the mismatch) I stuck at "velvet.apk" mismatch and this time It won't let me bypass and keep going on update to lollipop.
In my theory, Is it possible that I flash KXH21.85-17 from other country? Yes, any XT1063 (latin american, whereever on earth) supposed to flashable, but maybe the different country has slightly different apk. So that's why I failed the hash check.
Can anyone give me a URL or mirror to USA XT1063 for KXH21.85-17 that confirmed updatable to Lollipop? Since SBF-Dev and MotoFirmware is now down I couldn't find any.
I know what I'm saying is sound ridiculous, but I have no other theory that support my conspiracy anymore.
Hi @bankkung, I was facing similar problems. First you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Lamech242 said:
Hi @bankkungFirst you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
Click to expand...
Click to collapse
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
Lamech242 said:
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Click to expand...
Click to collapse
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
bankkung said:
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
Click to expand...
Click to collapse
Yes once you place the backup on your SD card, flash TWRP, reboot into recovery and go to advanced then go to file manager, then finish following the instructions above. Once you place it in the right place then you restore it. As of the stock recovery issue, it wouldn't make much sense to do that unless you followed the first option, where the stock recovery would actually be needed. But if you find a recovery image then yeah. If you do the second method you won't be able to receive updates nor update it manually unless doing the first method.. But the TWRP backup is the latest lollipop so enjoy!
If you still need help you can just flash TWRP recovery, and download this and flash it. http://forum.xda-developers.com/mot...-stock-rom-t2970427/post57438355#post57438355

T-Mobile HTC One M9 Not Receiving Nougat OTA. Unable to flash Nougat RUU as well

Folks,
I recently purchased a preowned HTC One M9 in good shape. The phone does not appear to have been rooted, s-offed or any such thing. It looks bone stock. It currently has Android 6.0 on it. and software number 3.39.531.41
It has been over a month since t-mobile has rolled out the nougat update for the HTC One-M9 and I have not received any update on the phone. I constantly keep checking if the phone has an update available but the phone always says no update available. I gave up on the OTA being rolled out for the phone so I downloaded the Nougat RUU which is 4.27.531.6 .
When I follow the procedure for installing the update I got a signature error 132 . Now I know that error shows up when the phone is rooted or is s-off or any such thing but my phone seems to be completely stock. Does anyone know why I cant install the RUU or receive OTA updates to Nougat for my phone?
I think I figured it out. I contacted T-Mobile support who told me to contact HTC since the HTC servers are responsible for pushing out updates. So I contacted HTC customer support and shared my IMEI with the representative. She looked up some information on the HTC database using the IMEI number and told me that my phone was a store demo phone and that demo phones are blocked from receiving updates from the HTC servers. Oh well.
Hello,
Just got the same phone with same error. If someone provides me with 0PJAIMG.ZIP, I can test and see how it goes. So far update from phone >> didn't work; RUU update >> didn't work. same error
Thanks
I had the same problem some time a go what you have to do is to check if its relock and has stock recovery. If yes first flash 3.39.531.41 RUU before you can flash the 4.27.531.6 or the OTA. But my receives the OTA alright but could neither install that or RUU
amptronic said:
I had the same problem some time a go what you have do is to check if its relock and has stock recovery. If yes first flash 3.39.531.41 RUU before you can flash the 4.27.531.6 or the OTA.
Click to expand...
Click to collapse
So it has to be locked with stock recovery? Then flash ruu 3.49 ad then the newest version?
Thanks
dohcvtec said:
So it has to be locked with stock recovery? Then flash ruu 3.49 ad then the newest version?
Thanks
Click to expand...
Click to collapse
did it work?? I'm having same problem..
smilesintears77 said:
did it work?? I'm having same problem..
Click to expand...
Click to collapse
Did anyone get any solution for this error? I am having the same issue
Thanks
vbcomer said:
Did anyone get any solution for this error? I am having the same issue
Thanks
Click to expand...
Click to collapse
i think first decrypt RUU then manually flash whole Nougat ROM.
vbcomer said:
Did anyone get any solution for this error? I am having the same issue
Thanks
Click to expand...
Click to collapse
i found a way i have demo set when i use 4.27.531.6 RUU its saying signature error so this is what i did
i download OTA from link here http://fotadl-az.htc.com/secure/OTA_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6-3.39.531.41_release_497409trrpztkwvabkx6lv.zip
after that i just boot into recovery mode and then select an opton Updae via ADB
rename file to OTA.zip then open command prompt located to where file is and then run below command
adb sideload ota.zip
let the process finish it will take a while. especially when HTC logo appears it took 5 min but i finally have nougat
for detail how to apply OTA here is link http://www.theandroidsoul.com/how-to-install-ota-updates-manually-using-recovery-and-adb-sideload/
m_abbas25 said:
i found a way i have demo set when i use 4.27.531.6 RUU its saying signature error so this is what i did
i download OTA from link here http://fotadl-az.htc.com/secure/OTA_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6-3.39.531.41_release_497409trrpztkwvabkx6lv.zip
after that i just boot into recovery mode and then select an opton Updae via ADB
rename file to OTA.zip then open command prompt located to where file is and then run below command
adb sideload ota.zip
let the process finish it will take a while. especially when HTC logo appears it took 5 min but i finally have nougat
for detail how to apply OTA here is link http://www.theandroidsoul.com/how-to-install-ota-updates-manually-using-recovery-and-adb-sideload/
Click to expand...
Click to collapse
Hi,
Thanks for the info. However, I couldn't get into the recovery mode. Either from bootloader -> "Boot to recovery mode" or via command "adb reboot recovery", after the phone reboots, the screen will show a phone icon with triangle. Then after awhile the phone will restart normally. I can't get to step to do sideload the zip file.
I also put the above ota.zip on a micro SD card and load the card in the phone, then boot to download mode. In that mode, it shows the following 2 lines:
FILE /mnt/media_rw/ext_sd/0PJAIMG.zip
File NOT FOUND
Where do I find that missing file?
Thanks
vbcomer said:
Hi,
Thanks for the info. However, I couldn't get into the recovery mode. Either from bootloader -> "Boot to recovery mode" or via command "adb reboot recovery", after the phone reboots, the screen will show a phone icon with triangle. Then after awhile the phone will restart normally. I can't get to step to do sideload the zip file.
I also put the above ota.zip on a micro SD card and load the card in the phone, then boot to download mode. In that mode, it shows the following 2 lines:
FILE /mnt/media_rw/ext_sd/0PJAIMG.zip
File NOT FOUND
Where do I find that missing file?
Thanks
Click to expand...
Click to collapse
I think your recovery file is damaged. Thou i am novice in this but i think you should run RUU of existing rom it may repair your recovery then try this method.
OK,
I found the 0PJAIMG.zip for version 3.39.531.7 in this forum "https://forum.xda-developers.com/tmobile-one-m9/general/please-read-rooting-using-twrp-t3069022"
I put that on my SD card and was able to update the phone from Lollipop to Marshmallow.
However, after that update, the phone still won't update from Marshmallow to Nougat using the file RUU_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6 downloaded from htc website nor the OTA.zip downloaded from this thread. The phone keeps having the same Error [132] Signature Error. Or it won't go into the Recovery mode to do sideload of the OTA.zip. If the original Recovery file (from Lollipop) was bad/corrupt, wouldn't the Marshmallow update correct/fix that file?
So, do we have any other idea to upgrade the phone from Android 6.0 to 7.0? Does anyone have a 0PJAIMG.zip for 7.0?
Thanks
vbcomer said:
OK,
I found the 0PJAIMG.zip for version 3.39.531.7 in this forum "https://forum.xda-developers.com/tmobile-one-m9/general/please-read-rooting-using-twrp-t3069022"
I put that on my SD card and was able to update the phone from Lollipop to Marshmallow.
However, after that update, the phone still won't update from Marshmallow to Nougat using the file RUU_HIMA_UL_N70_SENSE80_TMUS_MR_TMOUS_4.27.531.6 downloaded from htc website nor the OTA.zip downloaded from this thread. The phone keeps having the same Error [132] Signature Error. Or it won't go into the Recovery mode to do sideload of the OTA.zip. If the original Recovery file (from Lollipop) was bad/corrupt, wouldn't the Marshmallow update correct/fix that file?
So, do we have any other idea to upgrade the phone from Android 6.0 to 7.0? Does anyone have a 0PJAIMG.zip for 7.0?
Thanks
Click to expand...
Click to collapse
In order to OTA to work which is in this forum you have to be in 3.39.531.41 first find RUU of this version run it then go for OTA.
Noted that you wont be able to update from marshmallow to nougat using RUU you have to use OTA but for that you must be in version 3.39.531.41 .
Ok. I was able to install 3.39.531.41. I will try the OTA now
m_abbas25 said:
In order to OTA to work which is in this forum you have to be in 3.39.531.41 first find RUU of this version run it then go for OTA.
Noted that you wont be able to update from marshmallow to nougat using RUU you have to use OTA but for that you must be in version 3.39.531.41 .
Click to expand...
Click to collapse
I updated to version 3.39.531.41 but I am still unable to get to Recovery mode on my phone. It keeps showing the red triangle with exclamation mark.
So, is that correct that I am now having two choices (besides obviously stay with Marshmallow)
1. Need to somehow fix the recovery mode on the phone? It is a demo unit so I don't know if that has anything with the recovery not working
2. Try to download the 0PJAIMG for 4.27 (Nougat) and install from sd card. I did find the file from AndroidFileHost website, but the phone gave error when it tried to load the zip file from download mode:
12 RU_ZIP_ERROR
FAIL 12 RU_ZIP_ERROR
Do you have a reliable source for the OPJAIMG file for Nougat?
I did a research on the 12 RU_ZIP_ERROR and found an instruction for AT&T from developer Blueberry who suggested "If you're on Marshmallow base, first of all you need to upgrade your firmware and then flash this 0PJAIMG zip file via download mode in otherwise you'll be getting "12 RU_ZIP ERROR" during the flash process. No Wipe Firmware Link: https://www.androidfilehost.com/?fid=745425885120692233"
The above was for AT&T but I found the no_wipe zip for TMobile, however, I don't know how to upgrade the firmware on my phone using one of these files
the firmware no_wipe files are here:
https://www.androidfilehost.com/?w=files&flid=134381
The file I downloaded is "firmware_tmous_4.27.531.6_NoWipe.zip", but like I said above, I don't know how to update the firmware.... Can someone give me some directions?
Update: I renamed the file "firmware_tmous_4.27.531.6_NoWipe.zip" to "0PJAIMG.zip" and tried to update from download mode, but the phone gave error: 8 RU_SIGNATURE_FAIL.
Another research indicated that since the phone is S-ON and Locked, these firmware wouldn't install because they were not signed. Where can I find signed firmware for this phone?
Thanks
vbcomer said:
I updated to version 3.39.531.41 but I am still unable to get to Recovery mode on my phone. It keeps showing the red triangle with exclamation mark.
So, is that correct that I am now having two choices (besides obviously stay with Marshmallow)
1. Need to somehow fix the recovery mode on the phone? It is a demo unit so I don't know if that has anything with the recovery not working
2. Try to download the 0PJAIMG for 4.27 (Nougat) and install from sd card. I did find the file from AndroidFileHost website, but the phone gave error when it tried to load the zip file from download mode:
12 RU_ZIP_ERROR
FAIL 12 RU_ZIP_ERROR
Do you have a reliable source for the OPJAIMG file for Nougat?
I did a research on the 12 RU_ZIP_ERROR and found an instruction for AT&T from developer Blueberry who suggested "If you're on Marshmallow base, first of all you need to upgrade your firmware and then flash this 0PJAIMG zip file via download mode in otherwise you'll be getting "12 RU_ZIP ERROR" during the flash process. No Wipe Firmware Link: https://www.androidfilehost.com/?fid=745425885120692233"
The above was for AT&T but I found the no_wipe zip for TMobile, however, I don't know how to upgrade the firmware on my phone using one of these files
the firmware no_wipe files are here:
https://www.androidfilehost.com/?w=files&flid=134381
The file I downloaded is "firmware_tmous_4.27.531.6_NoWipe.zip", but like I said above, I don't know how to update the firmware.... Can someone give me some directions?
Update: I renamed the file "firmware_tmous_4.27.531.6_NoWipe.zip" to "0PJAIMG.zip" and tried to update from download mode, but the phone gave error: 8 RU_SIGNATURE_FAIL.
Another research indicated that since the phone is S-ON and Locked, these firmware wouldn't install because they were not signed. Where can I find signed firmware for this phone?
Thanks
Click to expand...
Click to collapse
I don't know much now but we can try RUU of 3.39.531.41. It should solve your recovery. But the question is where you can download that?? Try finding a link mean while i am uploading it to my google drive then i will share link. Since i am in third world country it will take time. I will update you as soon as it is uploaded
vbcomer said:
I updated to version 3.39.531.41 but I am still unable to get to Recovery mode on my phone. It keeps showing the red triangle with exclamation mark.
So, is that correct that I am now having two choices (besides obviously stay with Marshmallow)
1. Need to somehow fix the recovery mode on the phone? It is a demo unit so I don't know if that has anything with the recovery not working
Thanks
Click to expand...
Click to collapse
To continue on to recovery mode, try this:
" If a device with a red triangle and exclamation point appears, Hold Power while pressing and releasing Volume Up to continue."
As for the 3.39.531.41 RUU, put the zip from this link into your external SD then boot into fastboot/download mode. From that point on the phone should automatically recognize the .zip and install from there.
https://www.androidfilehost.com/?fid=24438995911969398,
Thank you much! I will try everything you suggested now. I really appreciate your help!
dbs25 said:
To continue on to recovery mode, try this:
" If a device with a red triangle and exclamation point appears, Hold Power while pressing and releasing Volume Up to continue."
As for the 3.39.531.41 RUU, put the zip from this link into your external SD then boot into fastboot/download mode. From that point on the phone should automatically recognize the .zip and install from there.
https://www.androidfilehost.com/?fid=24438995911969398,
Click to expand...
Click to collapse
I downloaded the RUU from above link [https://www.androidfilehost.com/?fid=24438995911969398], but after installing, the phone went from 3.39.531.41 back to 3.39.531.7. Was the above zip file really the 531.41 version?
I tried to reinstall the 0PJAIMG for 531.41 downloaded earlier, but the phone said signature error.
I tried to install using the OTA zip from this link [http://fotadl-az.htc.com/secure/OTA_...kwvabkx6lv.zip] from Recovery mode but the phone said "E3001: Package expects build fingerprint of htc/himaul_tmous/htc_himaul:6.0/MRA58K/690290.41:user/release-keys or htc/himaul_tmous/htc_himaul:7.0/NRD90M/869604.6:user/release-keys; this device has htc/himaul_tmous/htc_himaul:6.0/MRA58K/690290.7:user/relea
E:Error in /sideload/package.zip (Status 7)
Installation aborted
You have any idea to go back to 531.41? Since the OTA message seemed to indicate it expected a 531.41 version?
Thanks
Ok. I was able to get back to 3.39.531.41 by getting the 0PJAIMG from AndroidFileHost.
After that, I went to Recovery Mode (using pwr + vol up after seeing the red triangle), chose Apply Update from SDCard, selected the OTA file for 4.27.531.6. This time It didn't give any error, at the end it appeared to get stuck for a long time at the line Script Succeeded Result was [/preload]. After about an hour, I turned off the phone and on again, now it is stuck at HTC logo splash screen.
Questions here:
1. Was the phone really stuck at the "script succeeded" line?
2. Didn't I wait long enough?
3. What should I have done at that time when it stopped at that "script succeeded" line?
4. What should I do at this splash screen? It has been like that for the last 10 minutes
Thanks

Problems with Honor 5C/7 Lite/Nem-L21, bootloop and more

Hi
I have searched through just about every thread and tried just about every trick in the book to make my Honor 5c/7 Lite/NEM-L21 to work again but nothing works for my problem. I'll try to describe what I did, what I have tried and what I am able to do with it.
What I did
Unlocked bootloader the official way with code from Huawei.
Flashed twrp recovery
Installed SuperSU from twrp and rooted the phone
Tried to install some custom roms and some stock roms, eventually I tried to install something that apparently wasn't for my specific model and twrp started to throw errors at me
The main error whenever I tried to do something in twrp was "can't mount /cust.." and some more error message which I can't remember
After that I tried to reboot my phone and hoping that it would somehow heal magically, which, of course, it didn't
What I did not do
Take a backup before I started to mess with my phone, stupid, yes I know, but tell me if you have to
What I am still able to do
E-recovery: can boot into E-recovery and connect to wifi and search for package info but then it fails with an error message stating that something is wrong with the package
Stock recovery dload method: Starting to install the package but halts at 5% and then the phone reboots and boots with error stating that I should update again, not sure about what package is loading since I think I have a dload folder both on the internal and the external sd card, but I cant see the internal sd card anywhere (loading the external sd card through another phone)
Fastboot: can boot into fastboot with volume- and power button and do almost all the fastboot commands, but adb does not detect my phone.
What I have tried
Googled, looking here and searching deep inside myself for answers (without any luck, needles to say)
Tried downloading a stock rom NEM-L21***B132, Android 6.x Emui 4.1 and extracting boot.img, system.img, recovery.img and cust.img and while boot and recovery flashes fine with this extracted images everything goes ape**** when trying to flash cust and system, with cust I get a partition error while writing and with system I get a sparse flash write failure, I have no idea why this rom fails while I'm able to flash above mentioned files perfectly fine with a stock nougat rom (Nougat is the reason I started this adventure to begin with). When I flashed all the files fine and try to dload the whole update.app I get nowhere anyway, just a bootloop.
Tried to erase and reformat cust and system but when I try that in fastboot I get a remote: command not allowed.
Tried to flash twrp recovery and the flashing succeeds but I cant boot into it, tried several different versions designed for both 'nougat and marshmallow.
What I need
Someone to point me in the right direction because I am totally lost and almost going crazy after trying everything.
All the help and tips I can get from you guys is much appreciated, I'm willing to try everything you throw at me and answer any questions regarding my issue!
Thanks in advance, Jeremias
dload method, use B100 package.
thelous said:
dload method, use B100 package.
Click to expand...
Click to collapse
Thanks for your fast reply, I do have a few questions for you:
1. Do you have any idea where I can find the B100 package? Tried googling but no luck so far, lowest I can find i B130.
2. Should I just put it on the external SD card and try to get it to update or do I need to extract the *.img and flash them in?
3. Could it be a problem that I might have a dload folder on the internal SD card with a different package?
Thanks again.
jerre84 said:
Thanks for your fast reply, I do have a few questions for you:
1. Do you have any idea where I can find the B100 package? Tried googling but no luck so far, lowest I can find i B130.
2. Should I just put it on the external SD card and try to get it to update or do I need to extract the *.img and flash them in?
3. Could it be a problem that I might have a dload folder on the internal SD card with a different package?
Thanks again.
Click to expand...
Click to collapse
i think somewhere in xda theres B100. all you need is update.app file in dload folder on external SD card (recovery wonr read internal memory since it could be corrupted etc...)
thelous said:
i think somewhere in xda theres B100. all you need is update.app file in dload folder on external SD card (recovery wonr read internal memory since it could be corrupted etc...)
Click to expand...
Click to collapse
Found it, crossing my fingers that it will work this time.
Unfortunately I can't get it to update with the B100 package and the dload method. I can start the stock recovery and the update starts but it freezes at 5% and then the phone reboots with no error message and the bootloop continues.
Any more ideas?
Still no luck for me, anyone got any ideas?
jerre84 said:
Still no luck for me, anyone got any ideas?
Click to expand...
Click to collapse
what was your phone build number before all these? EMUI 4 or 5?
shashank1320 said:
what was your phone build number before all these? EMUI 4 or 5?
Click to expand...
Click to collapse
It was EMUI 4. The reason for all this was that I could not get the Nougat-update in any way.
I think that I might be on EMUI 5 now because I can't get the stock recovery from the B100/B132 package to boot but when I flash the recovery from B351 or similar it can boot but I'm, still not able to get any update to work.
jerre84 said:
It was EMUI 4. The reason for all this was that I could not get the Nougat-update in any way.
I think that I might be on EMUI 5 now because I can't get the stock recovery from the B100/B132 package to boot but when I flash the recovery from B351 or similar it can boot but I'm, still not able to get any update to work.
Click to expand...
Click to collapse
I had same issue on mine. I updated to nougat manually with few bugs and then flashed custom arsenic ROM

Bricked Honor 5c NEM-L51 ?

Hi, I think i've kinda bricked my honor 5C (nem-l51), and I really need help :
A few years ago I rooted my phone to make otg work.
It worked a little while, but then a system update came up, could not update because of the twrp, so I tried to unroot it (from supersu) to do the update, and the twrp stayed after the unroot.
I stayed with the phone like this, twrp installed and update pending (still trying to install the update from time to time) and then I had to use OTG again and tried to re-root my phone.
I tried to flash the supersu files I used the first time, but, even when the flashing worked, I couldn't see the supersu app on the phone, still unrooted.
Then I tried to change the twrp (via fastboot) and I realised that I couldn't : I get the "command not allowed" failure when the recovery should get written. I tried with numerous twrp versions, and stock recovery.
So my twrp right now is the twrp-3.1.1-0-venus "OpenKirin edition" one.
The phone says it's unlocked and the frp is locked, but I can't remember if it was already the case or not when I first rooted.
I unfortunately don't have anymore the bootloader unlock code that huawai gave me originally. I have no idea how to get it again, to try to re-lock/unlock the bootloader.
Back then when I first rooted my phone, I made a back up, so I tried to restore that back up. It failed, first with "cannot wipe the cust partition". Then I tried to restore without restoring the cust partition, and I got "extracttarfork() process ended with error 255" while the system was restoring.
After that, the phone wouldn't boot into android anymore. It would be stuck at the unlocked bootloader warning message and then reboot after a few minutes.
So, lastly, I tried to install the unofficial lineageOS port from here : https://forum.xda-developers.com/honor-5c/development/rom-lineageos-14-1-honor-5c-t3713911 with my twrp.
The installation went well, but the phone is stuck while first booting in lineageOS (I let it overnight, restarted it, re-installed it, tried with the first release, nothing).
TL;DR: My phone isn't booting and I can't flash any new recovery.
Please, help me to get my phone working again
Give me the
old build number on emui
Update build you received..
Twrp working?
Fastboot?
Erecovery?
I got access to erecovery, even if the "download latest version and recovery" doesn't work. (erecovery connects to wifi, and the first thing it tries to check/download fails)
I can boot into fastboot but can't flash recovery from there because of the command not allowed problem.
I can boot into twrp, but the back up I tried to restore and the lineageos rom I tried to install both failed, so maybe the twrp has a problem?
I'm sorry I'm not sure about the build number, I'm pretty sure I was on EMUI 5.0 and android 7.x, and I think I remember comparing current build number vs the update, and it was something like B350 or B351 for the current, and B355 or B375 for the update.
I've found this in my backup file 'recovery.log' ro.omni.version=6.0.1-20160703-nemo-HOMEMADE and ro.build.id=MOB30M . So, that mean that I had android 6.x when I did the backup, way back at the beginning.
I thought the update never got installed because each time the phone would reboot to complete installation, it would reboot into twrp. But I've still updated from android 6 to android 7 somehow ?
NEM-L51C432 or NEM-L51C10 ?
NEM-L51C432 and I'm sure of that ^^
Zhyrclew said:
NEM-L51C432 and I'm sure of that ^^
Click to expand...
Click to collapse
Flash this via twrp
http://update.hicloud.com:8180/TDS/...-L51_hw_eu/update_data_full_NEM-L51_hw_eu.zip
Once done, boot to twrp and flash this
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82938/f1/full/update.zip
Reboot.
If you are unable to flash the 2nd link then just use the dload method to flash this. If you are not aware of dload method, link is given in my signature.
Note, this 2nd firmware will replace your twrp with stock recovery. You should boot to b350 version and it will be full stock. Reason for flashing data file first is it doesn't replace the recovery to stock but just flashes your data, settings, apps. And 2nd link is main full firmware which will replace your boot, recovery, vendor everything and should boot.
Good luck
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Zhyrclew said:
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Click to expand...
Click to collapse
You may try other higher versions like 360, 370 etc and see your luck. Twrp will be replaced only if the installation os successful for the main firmware. Its just a trial and error for you now but I am 99% sure you should be able to revive the phone via dload method
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Zhyrclew said:
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Click to expand...
Click to collapse
Firmware finder website
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Zhyrclew said:
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Click to expand...
Click to collapse
Check dload guide in my signature. You can follow that now. Good luck
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Zhyrclew said:
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Click to expand...
Click to collapse
Copy them on PC and then try dload of files you downloaded from Firmware finder website.
These are files your phone downloaded for OTA update but as you were on twrp, they never installed it amd stays there
I copied the updates my phone downloaded on PC and then deleted them both on internal storage and sd card.
Then I tried dload method with b355,b375&b377 from firmware finder, and also with the update.zip I found in the updates my phone downloaded.
Nothing worked, all of them got the error "Incompatibility with current version. Please download the correct update package."
Should I try even more firmware versions, or should I try something else ?
Btw, I noticed my phone, when connected to my PC, is labeled as huawei-P9-lite, and I don't think it was always like that, but it's probably just because the twrp-3.1.1-0-venus.img is originally for the P9 lite.
I came accross this thread, where somebody recommends to flash stuff from fastboot.
I have not tried it yet, I only tried to flash recovery from fastboot, and it is failing with the "command not allowed". But maybe I could try to flash some other things ? Any advice ?
For now, despite all my attempts to install stock OTA via dload method, the phone is still trying to boot into lineageOS, and failing.
I came across the "current" firmware version with a check with DC-unlocker : "NEM-L51C432B120"
So I downloaded full OTA firmware b120 on firmware finder software, and the dload method worked !
The installation went well, and after a few minutes of the first boot, I got into phone configuration.
I have one last problem, though : the phone configuration is looping.
There is only 4 languages to choose, so I have to choose english(US), then there is a weird list of countries, none in the EU, where I feel i have to choose united states, then after some steps I have to register to huawei ID thing.
If I try to skip it, it loops to the language selection.
If I try to log in to my original account, it says "device not supported for your location" and then loops to languages. (my original account is in french/France)
If I try to create a new account with new address mail, it works but then at the end says again that "device not supported for your location" and then loops to languages.
I tried with other countries it still loops.
The other languages seems to be Chinese and Japanese, but the configuration is looping too if I choose them.
I tried with/without sim, with/without wifi connected...
Dload the next firmware now and see if it works. Then set the phone
I downloaded and installed with dload method (by removing sd card and copying directly on it the files, because I don't know how to have access to the phone internal & external memory now) the next firmware (b130 version)
The phone booted, it launched a "system optimization" that was a few minutes long, and then the EMUI configuration poped up and looped through language selection, region(country), wifi connection (successful), terms and conditions, and WLAN+(switch between wlan and mobile data automatically).
I feel like the phone is working, the notification led is even blinking when I receive sms, but I have access to nothing because of this damned configuration.
Note: the connection to huawei ID isn't prompted again in the loop once I log in, from the original or the new account. In order to be prompted again to log in to the huawei ID, I have to go to erecovery and reset to factory the phone.

Asking the professionals! - Phone boots to twrp but not OS

So i followed a guide to unlock my boot loader and then proceeded to use TWRP to back up, Format, and put a new image over it. My error was that TWRP needed to format a drive to let the encryption work, after this i did the back up, formatted the image, put a new image on to it, i used arm64-ab-gapps-su.img, restarted the phone and it would boot into nothingness and cycle the boot process constantly
i feel like i messed around with formatting to much, i know not to format Internal Storage but i may have formatted everything else and now im stuck and in hopelessness about it all
can i just take someone else's Boot Image, Recovery image, System Image, and Vendor Image is that how this works?
I can load up twrp and install, format and back up, it connects to the PC to upload images.
The phone is Moto G6 i bought it from an Australian store unlocked and using it in Australia with Optus as my Service provider
The reason i was looking to change my image was the stock standard OS was crashing with the new update on everything from call's to browsing the web
Hope you guys can help a novice with this
Info from the back of the phone is
Model:XT1925-7 Type:M3751 Made in China
mickeythewant said:
So i followed a guide to unlock my boot loader and then proceeded to use TWRP to back up, Format, and put a new image over it. My error was that TWRP needed to format a drive to let the encryption work, after this i did the back up, formatted the image, put a new image on to it, i used arm64-ab-gapps-su.img, restarted the phone and it would boot into nothingness and cycle the boot process constantly
i feel like i messed around with formatting to much, i know not to format Internal Storage but i may have formatted everything else and now im stuck and in hopelessness about it all
can i just take someone else's Boot Image, Recovery image, System Image, and Vendor Image is that how this works?
I can load up twrp and install, format and back up, it connects to the PC to upload images.
The phone is Moto G6 i bought it from an Australian store unlocked and using it in Australia with Optus as my Service provider
The reason i was looking to change my image was the stock standard OS was crashing with the new update on everything from call's to browsing the web
Hope you guys can help a novice with this
Info from the back of the phone is
Model:XT1925-7 Type:M3751 Made in China
Click to expand...
Click to collapse
Find your firmware here:
https://mirrors.lolinet.com/firmware/moto/ali/official/
mickeythewant said:
So i followed a guide to unlock my boot loader and then proceeded to use TWRP to back up, Format, and put a new image over it. My error was that TWRP needed to format a drive to let the encryption work, after this i did the back up, formatted the image, put a new image on to it, i used arm64-ab-gapps-su.img, restarted the phone and it would boot into nothingness and cycle the boot process constantly
i feel like i messed around with formatting to much, i know not to format Internal Storage but i may have formatted everything else and now im stuck and in hopelessness about it all
can i just take someone else's Boot Image, Recovery image, System Image, and Vendor Image is that how this works?
I can load up twrp and install, format and back up, it connects to the PC to upload images.
The phone is Moto G6 i bought it from an Australian store unlocked and using it in Australia with Optus as my Service provider
The reason i was looking to change my image was the stock standard OS was crashing with the new update on everything from call's to browsing the web
Hope you guys can help a novice with this
Info from the back of the phone is
Model:XT1925-7 Type:M3751 Made in China
Click to expand...
Click to collapse
moto g6 is arm a only so arm64 and arm ab images won't work.
Thanks
Ragarianok said:
Find your firmware here:
Click to expand...
Click to collapse
Im struggling to find a guide on how to make this work? i have twrp installed in recovery, and this isnt the right .img to just copy it over, Thank you for pointing me to the stock files tho! im still not giving up on this!
mickeythewant said:
Im struggling to find a guide on how to make this work? i have twrp installed in recovery, and this isnt the right .img to just copy it over, Thank you for pointing me to the stock files tho! im still not giving up on this!
Click to expand...
Click to collapse
You'll need to flash the firmware while phone is in fastboot mode. You can either flash using ADB or RSDLite; I'd recommend RSDLite.

Categories

Resources