Related
Hello, I tried to install a firmware page samfirmware.com my samsung galaxy EUR tab is P1000. installed with odin and all was fine but now the tab does not turn.
Can someone help me?
Thank you and sorry for my bad English.
Can you get into download mode? hold volume down and power.
the screen does not turn but odin detects tab
Thanks.
Connect your usb to the power socket. If battery icon appears then there is hope. It seems like a display problem for me. If it doesnt your display might have issues. Try reflashing with odin and see. Also noob question did you flash with correct firmware for your device. If it still doesnt turn on it might be a hardware issue than a software one.
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
rui_sandra said:
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
Click to expand...
Click to collapse
If odin still able to detects it, then there is hope. But this procedure will wipe your tab clean, even internal sdcard!
Now, go to here and get Roto JMI FULL ROM + P1_add_hidden.pit.
Once you've done it, put your tab into download mode by:
1. Turn off your tab without plugging it into anything;
2. Press and hold Power + Vol down till your tab is on;
3. When you see android shoving picture, it's in download mode.
Plug your tab to your pc, launch odin. If it shows up, put P1_add_hidden.pit in PIT field, Roto-JMI-Full-v2 in PDA field. Check "Re-Partition" & "Auto Reboot". And let it flash. Your tab should be able to boot up now, with root installed, and future updates will not need to go through kies.
REMEMBER: DO NOT DOWNLOAD ANY FIRMWARE FROM SAMFIRMWARE.COM AS THEY CONTAINS LOCKED BOOTLOADER! Once you get above procedure done and able to boot up, then report back, still have things to be done
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
rui_sandra said:
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
Click to expand...
Click to collapse
Dark as in you still able to see anything on the screen or it wouldn't even turn on? Cause for tab, if battery power reach 10% or lower it will remain dim(as in without backlight, but screen is still on.
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
rui_sandra said:
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
Click to expand...
Click to collapse
Start up sound working as well? I thought after repartition and flashing new firmware should make things back to life. The tab never accidentally dropped before right?
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
rui_sandra said:
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
Click to expand...
Click to collapse
Without screen, I can't really help much now. If even charging through wallplug without showing battery icon, I believe your screen is basically defective, perhaps you needs to send back to samsung for a screen replacement since it's still new
i had the same problem before and i panicked. but all i have to do was to
1-flash Roto-JMI-Full-v2 with ODIN (No PIT and No Repartition)
you will get no touch screen after doing this
2-flash the stock ROM with ODIN (with PIT and Repartition checked) again and it will work
Where can I get the stock ROM download from?
Stuck with the same problem. So downloading the Roto-JMI-Full-v2 image. But not sure where to get the stock ROM from.
For me,
I am able to get the battery on the screen when I connect the usb.
I am able to get into the downloading screen by pressing the power + vol down.
Odin detects.
Odin gives me a "Pass" when I flash with Roto-JMI-Full-v2.
But after that I still cannot get in. The Screen is stuck on the Galaxy Tab with samsung logo at the bottom.
Any help would be great since I cannot do anything with the Tab right now.
Before I begin I know I'll be slammed for loading an incompatible ROM for my phone, dumb on my part, especially without a clockwork backup.
I was running a leaked 2.2 rooted, which when loaded removed clockwork so i could no longer take backups. I then followed pathikshah.com/blog/install-android-2-3-3-gingerbread-on-samsung-galaxy-s/ which I know says don't use for captivate, but I didn't read that.
I am now running 2.3.3 but my back button is not operational, it flashes when pressed as normal but completes no action. My home button however acts as my back button. My menu and search buttons are normal.
I do not have the 3 button combo capability as i once had before, the screen just stays black and the buttons light up and it stays like that till i battery pull.
Other than that and some crazy screen distortion of colors when it boots it runs fine from what I can tell. But I'd like to at some point get back to a stable/compatible ROM.
Please let me know how I can somehow get to stock or a stable ROM. Thanks in advance.
darkknight2k3 said:
Before I begin I know I'll be slammed for loading an incompatible ROM for my phone, dumb on my part, especially without a clockwork backup.
I was running a leaked 2.2 rooted, which when loaded removed clockwork so i could no longer take backups. I then followed pathikshah.com/blog/install-android-2-3-3-gingerbread-on-samsung-galaxy-s/ which I know says don't use for captivate, but I didn't read that.
I am now running 2.3.3 but my back button is not operational, it flashes when pressed as normal but completes no action. My home button however acts as my back button. My menu and search buttons are normal.
I do not have the 3 button combo capability as i once had before, the screen just stays black and the buttons light up and it stays like that till i battery pull.
Other than that and some crazy screen distortion of colors when it boots it runs fine from what I can tell. But I'd like to at some point get back to a stable/compatible ROM.
Please let me know how I can somehow get to stock or a stable ROM. Thanks in advance.
Click to expand...
Click to collapse
You only option may be to buy or make a jig to force download mode then you can flash the stock ROM using Odin.
erm, im not 100 % sure because i havent tried this yet... but if i read it correctly, your rom is still (somewhat) operational. So try installing rom manager, flash cwm, then reboot into recovery.
From that, you can install the 3 button fix. Then i would suggest going into download mode, flash back to stock 2.2 using the odin back to stock. Then you can begin the process of installing 2.3.3
Also, the problem with yours is, you installed the i9000 version which for some reason has that button mapping problem. There are 2 versions of 2.3.3 on this forum (Cyanogen Mod 7 and MIUI). You can use either one of those, the buttons work perfectly and i dont see anything wrong with it.
Oh and, as the above person said, if my method doesnt work, you can either buy a jig, or build one yourself. There are threads in this forum about both . Also, please refrain from using I9000 stuff unless you fully know what it does. Im not much of a modder myself which is why i only download stuff from the captivate dev section.
Hope i helped
P.S... youd only be slammed if you didnt know what your problem was and blamed someone else for it. This forum is to help people
Try volume up and power, or volume down and power
Miui
This video helped me to go to downloading mode on my i9000 that had its 3 buttons bug:
youtube.com/watch?v=D0aoabVtPJ8&feature=feedlik
you need to buy a 301k or 300k resistor and it will work for 100%
adb reboot download!
also see if odin sees the phone when the screen is black, if you say buttons light up the phone is on, could be a problem with the image used in download mode. i once had this happen after a bad crash on the old manhatten project kernel. the splash screen images got corupted and it wouldn't boot passed a messed up lookin splash screen. thought i fried the video chip and went to flash back to stock. the screen stayed black with the 2 button + usb cable combo but odin showed the yellow box. so i started flashing and halfwat through the little guy with the shovel poped up. i was in download mode but my screen was black do to corrupted splash screens. phone took a flash and went back to normal.
success
Thank you all for your help. I ended up building a jig out of 3 100k and a 1k resistor and an igo adapter. Tore it apart and built like jig and like every end to a Macguyver episode the crazy contraption worked like a charm. Funny thing is I loaded stock 2.2 ROM, which in turn bricked the phone. I got the phone ! computer logo. So I used the jig again and got it flashed to stock and up from there to Cyanogenmod 2.3.3.
Thanks again everyone.
i flashed darky rom 1.3 on my phone, ive been having some problems id get a lot of force closes and i wouldnt be able to call out when i do it would end the call after the first dial, id get no signal, id then get a force close, then signal would come back. so i went into cwm recovery. performed a full data wipe and tried to flash any other rom - rocket rom v12 and cassie xtra lite v5. on every type of rom i try even the kl7 stock deodexed, it just stays stuck on the samsung glaxy note gt n7000 screen and stays like that. for instance its been like that for the past 40 mins now at the side of me. i dont really know what to do, ive tried multiple data wipes inc dalveks cache. would flashing via odin help ? how do i do that. wondered if i could get some help guys.
Your phone is not bricked. Just entered a boot loop.
You just need to reflash an official firmware from Samsung, then you can flash a custom one over that. Be careful that zergrush or appropriate exploit is avaliable for the version of firmware that you will flash, you don't want to increase the binary counter
To enter download mode:
"Put your Galaxy Note in download mode. To accomplish this, power off your Galaxy Note and then power it back on while holding volume down and home button together with power key".
thanks for the reply, im a little rusty to flashing stock roms with odin i dont really know what to do, i have odin opened with all the necessary things checked, ive downloaded this http://forum.xda-developers.com/showthread.php?t=1412959 stock kl7 but i just get a md5 tar file, how do i get the pda etc, that is ODIN way of doing it am i correct ?
am i right in thinking i can just resent the binary counter with a jiig sometime down the line ?
darkyrom
i had same issue with same rom and i flashed overa stock rom
aaaaaaits this rom bud, my note doesnt like it, try sheep rom, ive found that the best one out of all of them.
Hi there, I am new to this forum as I am trying to fix my gf's Samsung Galaxy S i9000M on Bell.
I tried to search up boot loop and have tried a few different ideas on the board but it doesn't seem to work.
Would like to know if anyone can help.
Here are the specs: Samsung Galaxy S i9000M - unrooted / stock.
Problem: The phone when turned on will only show the "Samsung Galaxy S I9000M" screen. It will turn black and then reloop itself. I have tried the 3 button boot to "download mode" and have successfully connected to ODIN.
I have tried to download PDA/Phone/CSC from one of the pages on this forum containing North American firmware files.
However, the problem still persists! I cannot check the OS version as I can't get the phone to boot into the OS. Is this a bootloader corruption problem? What should I do to try to fix this issue?
Any help would be greatly appreciated! THANK YOU in advance.
I assume you want Gingerbread?
If so, you want the UGKG3 download from Bell (it's the only GB ROM from Bell to date).
Go here and search for UGKG3.
The file is in 7Zip format. If you do not have anything to unpack it with, download IZArc.
Thanks for responding so quickly.
I did try the GB firmware - flashed it with ODIN - the software says successful.
But once the phone boots - it goes back into the loop - it does not know to unpack the OS to try to install and boot into it....
Any other ideas? Thanks again!
Did you flash it as a single file or 3 files?
You need to unpack the 7Zip file so you end up with 3 files:
Select PDA_UGKG3_Sbl.tar.md5 for PDA
Select CSC_BMCKG3.tar.md5 for CSC
Select PHONE_UGKG3.tar.md5 PHONE
Then flash with Odin. That should get the phone up and running again.
---------- Post added at 11:20 PM ---------- Previous post was at 11:17 PM ----------
How long has she had the phone? I wonder if she was on Froyo or GB.
Can you get into the recovery menu?
Thanks for your response.
I have unpacked all three files and loaded it into ODIN as per the firmware upgrade instructions on the thread you provided me.
I have also tried loading in both both the GB and the Froyo versions (UGKG3, UGJK3). After the "successful" message on ODIN, the phone boots up - shows the Samsung Galaxy GT I9000M screen and then goes black and keeps looping again.
I have a feeling this made me a problem with the bootloader. If the phone is completely stock, which one should i try flashing?
As the phone is stock there isn't a recovery (CWM) that i know of.... Or am I incorrect?
thanks again for your help!
OK, thanks for the clarification.
There should be the stock recovery from Samsung (2e or 3e).
Yes, it does sound like a bootloader problem.
Is it still under warranty?
EDIT: What is the build date for the phone? There will be a number in YY.MM format under the battery.
See if you can get into the recovery and try to clear the cache. That may give an indication as to what is going on.
We've had the phone for a year and a few months, so no more warranty.
In fact, we brought it back to bell store and they said there is "no way" the phone can be fixed. (yea right).
So I see a bunch of bootloaders in the forum here. Are there specific ones that work for the GT i9000M on bell? Or since I've tried flashing gb on the phone, do I need to download one that is specific to the OS? sorry as I am quite a n00b at this.
thanks!
The 3 file ROMs include a boot loader.
The GB one for Bell only includes the secondary bootloader (sbl.bin).
Bell no longer sells the i9000m, so they are hoping you'll simply buy a new one.
Your GFs phone is a couple of months older than ours. I bet the phone is one of the ones that has the issue where the internal storage is known to fail (builds prior to 11.03).
If that's the case, I think Samsung may repair/replace it, since it's a known issue with the early i9000m phones.
Did the phone get updated via Kies recently?
thanks again for following up.
How do I test if the phone's internal storage failed?
No I have not tried to update the phone via KIES. How does this work and what will it do?
Thanks!
Going into recovery and clearing the cache might show it.
If you see an error message that it can't mount something, that would be an indication.
EDIT: What's the build code?
I can't get into a recovery mode because the phone doesn't have CWM nor can I get by even the Samsung screen when it first turns on.
How do you flash via KIES? All I can do is get the phone into download mode. Can't do anything more.
Thanks.
Boot loop on stock Bell GT-I9000M
I have the same issue and still trying to find a solution.
Can't get into recovery. From most of what I read it's the boot loader. But I may be wrong, I 'm very new to this. I flashed with I9000UGKG3-homebinary with no luck. I did not however try the Sbl.bin file yet. I can still get to the Download mode and don't want to loose that ability.
Any help would be greatly appreciated.
galaxy s vibrant GT-I9000M
Bell mobility
Stock unrooted
GB
although you do not have CWM you should have a stock recovery... I know you have probably already tried.. but try again.
Menu+Power+Volume up...release only the power button as soon as the initial screen disappears.
if you do get into this screen you can do full wipes...
--pm me if you live in the Toronto area
It also might be a boot loader problem depending on what version of of android you were on and what you tried to do with odin and if you had the right version with the bootloaders etc.....
viperm5 said:
I can't get into a recovery mode because the phone doesn't have CWM nor can I get by even the Samsung screen when it first turns on.
How do you flash via KIES? All I can do is get the phone into download mode. Can't do anything more.
Thanks.
Click to expand...
Click to collapse
As dlockhart said, you should have the stock recovery on the phone.
Since you can get into download mode, you should be able to get into recovery mode by pressing volume up+home+power button.
Flashing through Kies only works if your phone will actually boot.
Since the phone is constantly boot looping, i tried to go into the stock recovery mode multiple times with the volume up + menu + power combination. Tried releasing the power button when the words are on the screen, when it is blank, and other permutations - but i cannot get into the stock recovery.
Once i press the volume down button instead though, i can quickly jump into download mode.
Is this normal? or am i doing something completely wrong?
Is there another way to get into stock recovery mode?
Don't release the power button until you see the recovery screen.
maybe also try flashing another kernel?
Boot loop on stock Bell GT-I9000M
I have tried to get to the recovery screen also with varied timing on button presses and releases, but no luck. Vol down and power gets me to download screen every time though.
I would keep trying the volume up power and home and as soon as you see the black background with galaxy showing let go of all buttons but wait until you see it restart again. So you'll hold vol. up + power + home and your phone will restart and you'll see the galaxy words keep holding the buttons until it restarts again and when you see the words let go of all three buttons. Now if your willing to switch kernels I would go to www.darkyrom.com and follow the directions there for flashing darkyrom 10.4.2 its just as smooth as stock but its not stock and voids your waranty, but since you dont have a waranty go for it. Good luck if you need any extra help you can pm me as well. I have had my phone since Oct. 2010 and flashed atleast a hundred roms and thought i broke my phone a few times but these thing are damn near impossible to totally mess up.
Sent from my GT-I9000 using Tapatalk
Is there a minimum remaining battery-life requirement for the device to enter Recovery?
Does the 3-button Recovery require power cable to be attached or not?
For what its worth, my I9000m has a Build Date of 11.04 and came with Froyo 2.2, so unless he already updated he's definitely not on 2.3.3
Downloading Kies to your PC and updating to 2.3.3 that way, just might work. Thats what I did.
Hi everyone. I have a rooted Galaxy Note 1. I accidentally tried to update something (the phone said there was an Android update or something) and now my phone in stuck in a bootloop showing the Android logo. When I try to reset it (volume+home+power buttons) it goes to an Odin "Downloading..." screen and gets stuck on that.
I've seen some stuff about unbricking the phone using Odin to return to the original stock rom. But from what I can tell, there are different stock roms available depending on your Country Sales Code (CSC). So apparently I need to look in Kies for my CSC to know which rom to download, but Kies doesn't recognise the phone, I guess because it's bricked. I know the phone is from the UK, but I don't know what network it came from (I bought it second hand). All I know is that it is unlocked now.
I have CWM.zip, CWM-SuperSU-v0.87.zip, and franco.Kernel-r5.zip on the micro SD card from when I was rooting it ages ago. Do these have anything to do with fixing it?
Any ideas on where I go from here? Thanks for your help.
Which volume button did you press ? You need volume up + home + power to get into recovery.
You can flash any rom from any region using odin.
Same problem
Hey,
Thanks for helping me in advance...
I used the Custom ROM (( http://forum.xda-developers.com/showthread.php?t=1970626 )) Ultimate N7000 for a long time. However this build became more and more unstable the longer I used my phone.
So I decided to go back to STOCK.
So I followed this guide: http://forum.xda-developers.com/showthread.php?t=1424997
And everything went well (Odin didnt give any errors)
However after reboot... the problem began... I cant turn my phone on anymore.... It seems to be stuck in a bootloop....
How can I fix this?? please help me
Which rom did you flash? If you flashed JB, boot into recovery and wipe data. Then reboot.