Database Develop

need rooting help please

Hi all I am following the info for this rooting method http://forum.xda-developers.com/showthread.php?t=544654 when i get to the section where i try and type comands in with the phone in fastboot i get errors saying cant load radio.img and it won't find the device with "adb devices" command but it will find it if the phone is on and running and pluged in to usb its a rogers htc dream using sdk 1.6 any ideas ?

what kind of phone do you have?

He has a rogers htc dream.
If it says it cannot load the .img make sure it is in the folder that you are operating from. If that still doesn't work, then make sure you have adb/fastboot properly set up

david1171 said:
He has a rogers htc dream.
If it says it cannot load the .img make sure it is in the folder that you are operating from. If that still doesn't work, then make sure you have adb/fastboot properly set up
Click to expand...
Click to collapse
How does one set up adb?

flexylexy said:
How does one set up adb?
Click to expand...
Click to collapse
there is a sticky in this section and it points to another guide if you can't get it with that one.

I think the problem is getting the computer to recongize the phone in fastboot mode because when I try adb devices it returns a device but when the phone is completly booted but will not return device in fastboot runing windows sdk 1.6 and I updated the driver

pwrjetta said:
I think the problem is getting the computer to recongize the phone in fastboot mode because when I try adb devices it returns a device but when the phone is completly booted but will not return device in fastboot runing windows sdk 1.6 and I updated the driver
Click to expand...
Click to collapse
the phone wont be recognized as a fastboot device if it is fully booted. It has to be in fastboot mode to be recognized. Boot phone into fastboot (back+power) then your 3 androids skateboarding screen. it will say fastboot. plug in your cable and it will say fastboot usb. then try fastboot devices.

Should it matter when I plug in the usb cable have tried putting it fastboot mode already pluged in and it says fastboot usb but the commands don't work should I plug the cable in after fastboot is started

It shouldnt matter.

allright got all the steps to work except for install the new update it gives me errors and says "e:can't open /sdcard/update.zip
(bad)
installation aborted"
What am i doing wrong?

you need some vodka, it will all work out ok then
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pwrjetta said:
allright got all the steps to work except for install the new update it gives me errors and says "e:can't open /sdcard/update.zip
(bad)
installation aborted"
What am i doing wrong?
Click to expand...
Click to collapse
i got that one and the md5 didn't match, re-download your rom.

[Q] Problem root with fire hd 7"

I have rooted my kindle time ago and when it comes at version 7.4.6 my root is disappear, i try to re-root with the method in this forum for 7.4.6 version but nothing happen and i don't know what i can do, i have installed adb driver correctly and my devices is recognized... sorry for my bad english

If you have fastboot cable you can get KFFAide and restore to 7.2.3 and do root method thru there which is easier IMO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304 Made you click!

i don't know what is it a fastboot cable so i don't mind that i have it

Credit goes to @seokhun for this
Fastboot mode without a factory cable
Code:
fastboot -i 0x1949 getvar product
Hit enter, and it should return with . If it doesn't, your fastboot drivers aren't working. Install Android SDK and go from there. If it does, connect your turned-off Kindle to the computer. Two things will happen: one, the command prompt will show "Tate-xxx-xxx" (something there), and two, your Kindle should reboot into fastboot mode. To exit fastboot mode, after you finished flashing what you needed, type this:
Code:
fastboot -i 0x1949 reboot
If you can fully boot into the ROM, you can use ADB to boot into fastboot, but you must still use the same command above to reboot out of fastboot mode
You can use this for fastboot and use KFFAide to restore and everything should work if you need better explanation for this check this link
http://forum.xda-developers.com/showthread.php?t=2271909
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304 Made you click!

i have tried it but nothing when i connect the kindle it reboot into the room i try to boot into fastboot with command
Code:
adb shell su -c "reboot bootloader"
but respond to me :
/system/bin/sh: su: not found

If it can't find su, then your device is not rooted and you can't run that command.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

the problem is that i can't root my device and i can't reboot in fastmode how i can restore this kindle and re-root them the problem is

You will probably need a fastboot cable unless you get lucky with the "fastboot -i 0x1949 getvar product" command, I usually only see that command working on the 8.9" models though. What root methods have you tried already?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

a tried a method for 2.4.6 in this forum http://forum.xda-developers.com/showthread.php?t=2351201

OK same method I used outside the fact I used Linux to run it. How far does binary's root get before you have a problem?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

i have done a factory reset and do the guide for root and now i have a kfhd with root now i proceed with 2nd bootloader and a rom thanks all for the help

[Q] Can't Open My HTC One M7

Hi all. I've try to install today Android Revolution Google Edition 6.1.
So, my phone is S-OFF, i've install but after boot my phone all time restart. Not open, so, i don't have another rom in my SD card and now, i can't login my sd card for copy. So, i've try too many time from diffrent computer (windows 7 64bit, windows 8 64bit) from cmd and "adb" and i've receive all the time "device not found" error. So, i can flash recovery but "adb" is not work. I've install SDK and install everything but still not show. Any idea?
By the way so sorry for my bad English. Please help me.

soundeluxe said:
Hi all. I've try to install today Android Revolution Google Edition 6.1.
So, my phone is S-OFF, i've install but after boot my phone all time restart. Not open, so, i don't have another rom in my SD card and now, i can't login my sd card for copy. So, i've try too many time from diffrent computer (windows 7 64bit, windows 8 64bit) from cmd and "adb" and i've receive all the time "device not found" error. So, i can flash recovery but "adb" is not work. I've install SDK and install everything but still not show. Any idea?
By the way so sorry for my bad English. Please help me.
Click to expand...
Click to collapse
can you check my guide http://forum.xda-developers.com/showthread.php?t=2541082 under FAQ #2 if that's the problem with Windows Device Manager.
you can disregard the guide only check FAQ #2

nkk71 said:
can you check my guide http://forum.xda-developers.com/showthread.php?t=2541082 under FAQ #2 if that's the problem with Windows Device Manager.
you can disregard the guide only check FAQ #2
Click to expand...
Click to collapse
Thanks for you reply. Actually my drivers looks like ok. Please check image;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"flash" command its ok, but adb still not work :S I've try too many time reinstall driver.

soundeluxe said:
Thanks for you reply. Actually my drivers looks like ok. Please check image;
"flash" command its ok, but adb still not work :S I've try too many time reinstall driver.
Click to expand...
Click to collapse
fastboot commands work in bootloader
adb commands work in custom recovery (eg TWRP) or booted up ROM (with USB debugging enabled)
so if you need adb then enter custom recovery, check your device manager again, because it changes depending on where you are (bootloader, TWRP ... even version matters, or ROM)
once in TWRP, and device manager is good, adb devices should return you serial number and "recovery" -> then you can use adb commands

24945626 720
nkk71 said:
fastboot commands work in bootloader
adb commands work in custom recovery (eg TWRP) or booted up ROM (with USB debugging enabled)
so if you need adb then enter custom recovery, check your device manager again, because it changes depending on where you are (bootloader, TWRP ... even version matters, or ROM)
once in TWRP, and device manager is good, adb devices should return you serial number and "recovery" -> then you can use adb commands
Click to expand...
Click to collapse
Finally. Thank you very much for your help dear @nkk71, i've lost the adb command just work on custom recovery
I've install driver and now everythings its ok, i'm try adb sideload rom.zip

Bricked Z2 pro

[Solved] After the last edit, I could go to fastboot and redo a "fastboot -i 0x2b4c boot twrp.img"
Hello,
I have a z2 pro, and i wanted to change the ROM on it. Since it came with a modified ROM, i flash a stock ROM. I then unlocked bootloader sucessfully.
I transfered the new ROM to the phone and did a
Code:
fastboot flash recovery twrp.img
The phone booted with twrp correctly. I then did a wipe of system, cache and dalvik.
I tried to install the new ROM, but it prompted me the error "Unknown Command [log]". Having already installed a new ROM on another device, i remembered that disconnecting the usb cable or rebooting did the work, so i did both.
Now, the phone isn't recognized by my computer, so i can't redo the "fastboot flash", and when i go into recovery mode, it isn't TWRP that is loaded but this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How can i do to load TWRP again on the phone, or flash a ROM ?
I have shut down the phone and hold the power button, windows seems to recognize it as a cd drive. QFIL still doesn't change his status from "no port available"
Edit: After reinstalling QPST, qualcomm driver and usb driver, QFIL now detect this port "ShenQi HS-USB Diagnostics (COM4)" and if i check "Show Non QDLoader\DIAG Port" it also show "ShenQi HS-USB NMEA (COM7)" and "ShenQi test mode Interface (COM5)".
When i tried to do a download content, i got prompted the following error "Download Fail: Switch to EDL Fail".
When i run "adb devices" it show the phone under "? unauthorized"
Thanks

@maxorus When you power on phone you should have start menu for 5 sec. if your bootloader is unlocked . Just push vol - or vol + , then choose fastboot ( bootloader ) and confirm by power

maxorus said:
[Solved] After the last edit, I could go to fastboot and redo a "fastboot -i 0x2b4c boot twrp.img"
Hello,
I have a z2 pro, and i wanted to change the ROM on it. Since it came with a modified ROM, i flash a stock ROM. I then unlocked bootloader sucessfully.
I transfered the new ROM to the phone and did a
The phone booted with twrp correctly. I then did a wipe of system, cache and dalvik.
I tried to install the new ROM, but it prompted me the error "Unknown Command [log]". Having already installed a new ROM on another device, i remembered that disconnecting the usb cable or rebooting did the work, so i did both.
Now, the phone isn't recognized by my computer, so i can't redo the "fastboot flash", and when i go into recovery mode, it isn't TWRP that is loaded but this
How can i do to load TWRP again on the phone, or flash a ROM ?
I have shut down the phone and hold the power button, windows seems to recognize it as a cd drive. QFIL still doesn't change his status from "no port available"
Edit: After reinstalling QPST, qualcomm driver and usb driver, QFIL now detect this port "ShenQi HS-USB Diagnostics (COM4)" and if i check "Show Non QDLoader\DIAG Port" it also show "ShenQi HS-USB NMEA (COM7)" and "ShenQi test mode Interface (COM5)".
When i tried to do a download content, i got prompted the following error "Download Fail: Switch to EDL Fail".
When i run "adb devices" it show the phone under "? unauthorized"
Thanks
Click to expand...
Click to collapse
I think you must delete your old drivers from PC and install news.

Switch off your phone.
Keep Pressing vol down button 4/5 secs & connect usb.
Check device manager in pc.
If its showing diagnosis no problem.
Open qfil & load content file from ur rom.
Click download content & just keep it connected.
Qfil automatically switches to download mode (9008) & starts flashing rom.
If download mode does not start on its own check these items below :
Update Qualcomm driver
Update windows, even optional updates.
Use QPST 2.7
Let me know the progress!!

Cant flash TWRP - error: device '(null)' not found in adb

Hi all.
I would not be writing this topic if everything I did havent failed.
I tried every possible solution to this I was able to find on the internet - nothing has worked so far.
I tried doing this on different PCs - same result.
I flashed Syberia ROM but didnt like it so decided to go with MIUI 9.7.10.12. I already had TWRP at that time but when I flashed MIUI everything erased, I mean everything - data, storage, TWRP everything.
System works fine but I am unable to flash TWRP with constant message: error: device '(null)' not found.
ADB device not found but fastboot works and ADB shows device connected. The phone is authorized with USB debugging turned on, drivers installed on PC, TWRP image file is correct. I am lost :/ dont know what to do.
Please help

there is no need to flash recovery via adb. twrp should be flash from fastboot. turn off your phone, hold volume down and power for few seconds and phone will boot in fastboot mode.
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
and done.

sunilromy said:
there is no need to flash recovery via adb. twrp should be flash from fastboot. turn off your phone, hold volume down and power for few seconds and phone will boot in fastboot mode.
and done.
Click to expand...
Click to collapse
Where should I type in the command if not in ADB?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I go manually to recovery (vol up + power) the phone reboots to stock recovery so the TWRP is not installed. I tried different versions of TWRP. no progress

Type
Fastboot reboot
and now you can go to twrp recovery by manually .. Power off phone, volume up + power
Or you can also do this

sunilromy said:
Type
Fastboot reboot
and now you can go to twrp recovery by manually .. Power off phone, volume up + power
Or you can also do this
Click to expand...
Click to collapse
fastboot reboot --> phone goes to system
vol up + power --> stock recovery
the problem is TWRP is not flashing :/
it is not USB debugging problem, not USB drivers problem.
The other thing is I can go to fastboot through ADB only when im on CHARGING MODE, it doesnt work on MTP MODE where it should.

brother you just flashed twrp successfully in the screenshot you posted, point is miui, dont let it stick when you boot to system and reboot.
you should, do this. go to fastboot
fastboot flash recovery twrp.img
fastboot boot twrp.img
Click to expand...
Click to collapse
you can flash other modded recovery which will stick. like zcx

sunilromy said:
brother you just flashed twrp successfully in the screenshot you posted, point is miui, dont let it stick when you boot to system and reboot.
you should, do this. go to fastboot
you can flash other modded recovery which will stick. like zcx
Click to expand...
Click to collapse
thx, that command worked

but why I cant go to TWPR using vol up + power?

fastboot boot twrp.img doesn't work for me, after it just black screen with MI logo and "Unlocked" for a long time...
can't enter twrp in any way after success flashing :crying:

Need help with this. Can't sideload with adb fastboot is working fine though.

How can I solve "FAILED (remote: This partition doesn´t exist error)"?

From TWRP > tap Advanced > Terminal > run command: mkdir -p /data/media/0/
Copy the rom to your phone internal storage from pc
Install by finding the transfered rom in the internal storage.