Database Develop

need rooting help please

Hi all I am following the info for this rooting method http://forum.xda-developers.com/showthread.php?t=544654 when i get to the section where i try and type comands in with the phone in fastboot i get errors saying cant load radio.img and it won't find the device with "adb devices" command but it will find it if the phone is on and running and pluged in to usb its a rogers htc dream using sdk 1.6 any ideas ?

what kind of phone do you have?

He has a rogers htc dream.
If it says it cannot load the .img make sure it is in the folder that you are operating from. If that still doesn't work, then make sure you have adb/fastboot properly set up

david1171 said:
He has a rogers htc dream.
If it says it cannot load the .img make sure it is in the folder that you are operating from. If that still doesn't work, then make sure you have adb/fastboot properly set up
Click to expand...
Click to collapse
How does one set up adb?

flexylexy said:
How does one set up adb?
Click to expand...
Click to collapse
there is a sticky in this section and it points to another guide if you can't get it with that one.

I think the problem is getting the computer to recongize the phone in fastboot mode because when I try adb devices it returns a device but when the phone is completly booted but will not return device in fastboot runing windows sdk 1.6 and I updated the driver

pwrjetta said:
I think the problem is getting the computer to recongize the phone in fastboot mode because when I try adb devices it returns a device but when the phone is completly booted but will not return device in fastboot runing windows sdk 1.6 and I updated the driver
Click to expand...
Click to collapse
the phone wont be recognized as a fastboot device if it is fully booted. It has to be in fastboot mode to be recognized. Boot phone into fastboot (back+power) then your 3 androids skateboarding screen. it will say fastboot. plug in your cable and it will say fastboot usb. then try fastboot devices.

Should it matter when I plug in the usb cable have tried putting it fastboot mode already pluged in and it says fastboot usb but the commands don't work should I plug the cable in after fastboot is started

It shouldnt matter.

allright got all the steps to work except for install the new update it gives me errors and says "e:can't open /sdcard/update.zip
(bad)
installation aborted"
What am i doing wrong?

you need some vodka, it will all work out ok then
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pwrjetta said:
allright got all the steps to work except for install the new update it gives me errors and says "e:can't open /sdcard/update.zip
(bad)
installation aborted"
What am i doing wrong?
Click to expand...
Click to collapse
i got that one and the md5 didn't match, re-download your rom.

Cannot install CM 10.2 via ADB Sideload

Hi all,
I've been combing this forum to try and find the answer to my specific question, and I can't seem to find the answer.
I'm in the process of rooting/flashing a custom ROM to my KFHD7. I've gone through all the steps up until installing a ROM via TWRP. I've been following Seokhun's guide located here.
I downloaded Hashcode's CM 10.2 ROM here.
Once I booted into TWRP, I realized that somehow I had accidentally flashed /sdcard and I had no bootable ROM. Thus, I followed Seokhun's steps to sideload a ROM file:
6. Wiped /sdcard, can't reboot from recovery: You thought you had the ROM file on the sdcard, but you didn't, and wiped everything, so without a ROM image, you can't boot into system.
Solution: Put the ROM file where your ADB binary is (usually inside platform-tools folder in Android SDK directory) and rename it rom.zip. On the device, boot into TWRP, select Advanced, then ADB Sideload. Connect device to PC. From here, run "adb" and hit Enter to check for your binary version, if it's anything lower than 1.0.3.0, you need to update the binaries by re-installing the latest Android SDK. Once the device is in sideloading mode and is connected to the PC, type "adb sideload rom.zip" and hit Enter. Now you'll find the ROM on the sdcard, flash, and you're done.
Click to expand...
Click to collapse
I checked my ADB version:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then moved Hashcode's CM 10.2 ROM from "downloads" to the folder where my ADB exe is located and renamed it "rom.zip" as the guide instructed:
Next, I boot into TWRP -> Advanced -> ADB Sideload via my fastboot cable
On that screen i see "Wipe Dalvik Cache" and "Wipe Cache" as check boxes along with "Swipe to Start Sideload" slider.
From there, i enter the command "adb sideload rom.zip" into the CMD prompt and it returns this:
UPDATED:
After thinking about it, I went in and changed the zipped folder name to "rom" realizing that the ".zip" should be understood as the file extension and not a part of the actual file name.
So, after changing the name, I went into TWRP -> Advanced -> ADB Sideload -> Swipe to begin sideload
I enter the command "adb sideload rom.zip" and it shows that Daemon starts successfully but then returns this error message:
and my KFHD7 does not download the ZIP file successfully.
So, after all of that, any ideas from the XDA community? Sorry this was so long. I'm new to the forums and wanted to make sure I was very specific to my individual problem. Thanks for the help in advance!
UPDATED:
I was able to find a solution here
I ran "adb usb" before running "adb sideload rom.zip" and it worked like a charm.
My KFHD7 is now successfully flashed with Hashcode's CM 10.2 mod!
I decided not to delete this thread in case anyone else had this very specific issue. However, if one of the mods feel it necessary to delete, then please do so.

for anyone else that comes along to this thread seeking salvation after a moment of forgetfulness and / or misguided recklessness, you can use Restore2Stock. took me a good while to find it but eventually stumbled across is and it solved everything, an exe that can fix everything as long as you can boot to TWRP:
http://n2aos.com/forum/restore2stock-r2s/890-kindle-fire-hd-7-wiped-operating-system.html
the above link is a brief explanation of how to use it. the download link is on the main page.
happy restoring

Transfert file with ADB

Hi so i flashed the google edition rom and it kept bootlooping, so i went to recovery and wiped everything but it wiped also the ROM file from the sd card now im left with nothing to flash and only recovery i think i have to transfert the file trough ADB if so can anyone give me a tutorial ? i tried adb but there is no devices listed :'( i think its debug mode it wasnt enabled.

JadeAmineHa said:
Hi so i flashed the google edition rom and it kept bootlooping, so i went to recovery and wiped everything but it wiped also the ROM file from the sd card now im left with nothing to flash and only recovery i think i have to transfert the file trough ADB if so can anyone give me a tutorial ? i tried adb but there is no devices listed :'( i think its debug mode it wasnt enabled.
Click to expand...
Click to collapse
USB debugging doesnt matter in custom recovery.
adb push <name of ROM>.zip /data/media/0/
or
adb sideload <name of ROM>.zip
you can always try googling, and come up with a few tutorials:
http://forum.xda-developers.com/showthread.php?t=2317986
http://android-revolution-hd.blogspot.com/2013/12/ow-to-use-adb-sideload.html
http://android-revolution-hd.blogspot.com/2013/12/how-to-copy-rom-zip.html
etc.

This shows device not found when i use adb devices there is nothing

JadeAmineHa said:
This shows device not found when i use adb devices there is nothing
Click to expand...
Click to collapse
Open Device Manager do you see something like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if yes, please go to my guide and check FAQ #2.

nkk71 said:
Open Device Manager do you see something like:
if yes, please go to my guide and check FAQ #2.
Click to expand...
Click to collapse
This is what i see sync manager is installed i tried the fastboot command to get token for boatload unlock and it works but adb is not working, Plase help me i'm stuck :crying: and just to mention that im in bootloader in fastboot usb mode ??

JadeAmineHa said:
This is what i see sync manager is installed i tried the fastboot command to get token for boatload unlock and it works but adb is not working, Plase help me i'm stuck :crying:
Click to expand...
Click to collapse
like i said, just go to my guide and check FAQ #2 (in post #1), http://forum.xda-developers.com/showthread.php?t=2541082
has all the instructions, pictures, etc.

[Q] help Reverting back 2.3

I have a serious problem, I installed the B133 and now the update and has left me a window constantly open
"Sorry, Unfortunaly the process com.android.phone has stopped." and do not let me do anything
I already restored but I get the fine not to the cust, any ideas?
how the Reverting back 2.3

I got the same problem and I can't go back to 2.3,pls someone help us :/

GuyS
Try to flash 2.3 recovery and dload it..

How do I flash it?I don't understand how because of huawei that is too complicated..

You need adb tools, google how to install them and enable USB debugging. After installing put the recovery image into the adb folder and type
cd c:/[position of the adb folder]
adb devices
adb reboot bootloader
Fastboot flash recovery recovery[name of recovery].img
Fastboot reboot

The problem is that I simply can't do anything when my phone is on!I only get a message that says "unfortunately com.android.phone has stopped" so I can't go to the settings and enable the usb debug mode

Boot the phone pressing volume down and power let's you directly get into the bootloader.. So just use the two Fastboot orders

So,I'm on the bootloader..Now when I try to open fastboot on my pc,only a black tab appears and disappears after a sec,is that normal?

Gaudhier said:
So,I'm on the bootloader..Now when I try to open fastboot on my pc,only a black tab appears and disappears after a sec,is that normal?
Click to expand...
Click to collapse
downl this https://www.sendspace.com/file/uhv7n4
u need to get 2.3 recovery from somewhere I dont have it.. put it in there in folder and flash it there is command first one..
if u want u can force 2.3 ROM via adb .. with second command

I think I have a recovery from huaweiupdateextractor..
This is what I get,and it seems like fastboot doesn't recongnize my phone..
View attachment 3078581

Gaudhier said:
I think I have a recovery from huaweiupdateextractor..
This is what I get,and it seems like fastboot doesn't recongnize my phone..
View attachment 3078581
Click to expand...
Click to collapse
u need to be in bootloader.. and those your typed commands are nonsense .. type ; fastboot flash recovery recovery.img (when u copy your 2.3 extracted ..

Edit : Sorry, nonsense. Didn't saw post above

This is what i get.. View attachment 3078641
And by bootloader you mean the system recovery?Where I can do a factory reset?

Type: Fastboot flash recovery recovery.img
Then you are able to flash another firmware or to do a Factory reset

I typed it several times,but I don't understand why it always shows "cannot determine image filename for recovery.img" like on the screenshot I posted earlier,I don't understand because I moved the recovery into the ADB folder
edit:It worked when I deleted the second adb folder I had earlier..But now the thing is that it stays on "waiting for device" even if I'm in recovery mode

You wrote a couple of things, but not those four words...??!
---------- Post added at 07:40 PM ---------- Previous post was at 07:33 PM ----------
I think I mentioned the mistake. You need administrator rights for this procedure, it looks like if you run cmd as a normal user..?

l3Nni said:
You wrote a couple of things, but not those four words...??!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This time I wrote the whole thing,but it still says "waiting for device"
And well I run it with administrator rights but it's still waiting for device :/

I added something to my last post.. Tried as admin?

l3Nni said:
I added something to my last post.. Tried as admin?
Click to expand...
Click to collapse
I'm already running it as admin

[FIX] FastBoot Mode without using a Factory Cable. [TWRP BootLoop]

Recently while updating my Kindle Fire HD 7, my device went into a bootloop where it would boot into TWRP and the TWRP logo kept blinking, I live at a place where it is impossible to procure a factory cable. After numerous failed attempts on making one myself i gave up on factory cables. I however wasn't satisfied enough by my failures so i went the hard way and out of curiosity connected my Kindle to my Laptop and did an ADB device lookup. VOILA ! It was there but now i was wondering how to get it into the fastboot mode from there. After crashing my head several times and punching a few commands my device booted into the orange heaven for a hacker. "The FASTBOOT Mode." So if you are in the same situation i hope this guide will be able to help you unbrick your device.
Steps:
1. Power on your device until the dreadful TWRP LOGO starts flashing.
2. Connect your kindle with your PC.
3. Type in "adb devices" and check if your device is available.
4. If your device shows up in ADB Devices List, Proceed to the next step.
5. Type in "adb reboot bootloader"
6. Now the device will boot into the fastboot mode.
7. Download TWRP from here
8. cd to the folder where your twrp image has been downloaded and type "fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img" to flash it

TWRP downloading from the link indicated installs a Trojan on your PC. Caution

ancestrale59 said:
TWRP downloading from the link indicated installs a Trojan on your PC. Caution
Click to expand...
Click to collapse
This version TWRP has been uploaded by @Hashcode , Kindly use the second button to download (BlueColor) and not the 1st one.

Title
Do you want me to test it? I will be able to do so in about 1-2 months because I have the same problem. I'm gonna save this page in favorites until then.
Sent by my kfhd7 with BeanStalk-4.4.4065-20141002-tate and Twrp 2.8.7.0

Okay, I've put in the last command, and now it says it is waiting for any device. It doesn't seem to want to detect my device, any ideas?
EDIT: Nevermind, just had to set it to the adb composite driver!

device never booted into fastboot mode
sxrmafia said:
Recently while updating my Kindle Fire HD 7, my device went into a bootloop where it would boot into TWRP and the TWRP logo kept blinking, I live at a place where it is impossible to procure a factory cable. After numerous failed attempts on making one myself i gave up on factory cables. I however wasn't satisfied enough by my failures so i went the hard way and out of curiosity connected my Kindle to my Laptop and did an ADB device lookup. VOILA ! It was there but now i was wondering how to get it into the fastboot mode from there. After crashing my head several times and punching a few commands my device booted into the orange heaven for a hacker. "The FASTBOOT Mode." So if you are in the same situation i hope this guide will be able to help you unbrick your device.
Steps:
1. Power on your device until the dreadful TWRP LOGO starts flashing.
2. Connect your kindle with your PC.
3. Type in "adb devices" and check if your device is available.
4. If your device shows up in ADB Devices List, Proceed to the next step.
5. Type in "adb reboot bootloader"
6. Now the device will boot into the fastboot mode.
7. Download TWRP from here
8. cd to the folder where your twrp image has been downloaded and type "fastboot -i 0x1949 flash recovery kfhd7-twrp-2.8.7.0-recovery.img" to flash it
Click to expand...
Click to collapse
I've done all the steps the device is recognized but unauthorized, it doesn't boot into fastboot mode at all. I'm stuck here so many headaches i've had from this

movemaker said:
I've done all the steps the device is recognized but unauthorized, it doesn't boot into fastboot mode at all. I'm stuck here so many headaches i've had from this
Click to expand...
Click to collapse
I am encountering the same issue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}