Database Develop

need rooting help please

Hi all I am following the info for this rooting method http://forum.xda-developers.com/showthread.php?t=544654 when i get to the section where i try and type comands in with the phone in fastboot i get errors saying cant load radio.img and it won't find the device with "adb devices" command but it will find it if the phone is on and running and pluged in to usb its a rogers htc dream using sdk 1.6 any ideas ?

what kind of phone do you have?

He has a rogers htc dream.
If it says it cannot load the .img make sure it is in the folder that you are operating from. If that still doesn't work, then make sure you have adb/fastboot properly set up

david1171 said:
He has a rogers htc dream.
If it says it cannot load the .img make sure it is in the folder that you are operating from. If that still doesn't work, then make sure you have adb/fastboot properly set up
Click to expand...
Click to collapse
How does one set up adb?

flexylexy said:
How does one set up adb?
Click to expand...
Click to collapse
there is a sticky in this section and it points to another guide if you can't get it with that one.

I think the problem is getting the computer to recongize the phone in fastboot mode because when I try adb devices it returns a device but when the phone is completly booted but will not return device in fastboot runing windows sdk 1.6 and I updated the driver

pwrjetta said:
I think the problem is getting the computer to recongize the phone in fastboot mode because when I try adb devices it returns a device but when the phone is completly booted but will not return device in fastboot runing windows sdk 1.6 and I updated the driver
Click to expand...
Click to collapse
the phone wont be recognized as a fastboot device if it is fully booted. It has to be in fastboot mode to be recognized. Boot phone into fastboot (back+power) then your 3 androids skateboarding screen. it will say fastboot. plug in your cable and it will say fastboot usb. then try fastboot devices.

Should it matter when I plug in the usb cable have tried putting it fastboot mode already pluged in and it says fastboot usb but the commands don't work should I plug the cable in after fastboot is started

It shouldnt matter.

allright got all the steps to work except for install the new update it gives me errors and says "e:can't open /sdcard/update.zip
(bad)
installation aborted"
What am i doing wrong?

you need some vodka, it will all work out ok then
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pwrjetta said:
allright got all the steps to work except for install the new update it gives me errors and says "e:can't open /sdcard/update.zip
(bad)
installation aborted"
What am i doing wrong?
Click to expand...
Click to collapse
i got that one and the md5 didn't match, re-download your rom.

[Q] my razri not start :(

hi,
I followed the tutorial correctly http://forum.xda-developers.com/showthread.php?t=1928551
and my razri not start ..
* "M" written in the middle and "unlocked"
and is restarting ..
help
ty

Don't worry you just Bootloop.
What you have to do is download rsdlite, the motorola driver and the firmware were you come from (EU, GB, DE...), it's an ".xml" file.
Install the driver and rsdlite 6.0.4 on your computer.
After, you have to power on your phone in fastboot mode so press the volume down button and power on in the same time during 5s or 6s, your phone will boot in fastboot mode, stay in this mode and connect your phone to your computer.
To finish, open rsdlite, (you'll see your phone connect) select your ".xml" file and click start.
That's all
If it's not working there's an other solution but normally it'll work like charm!
Sent from my XT890 using xda premium

PELLET Nolwenn ty,
I tried 3 times, but I was stuck in this part...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and he keeps rebooting, and "M" written in the middle and "unlocked"...
Help :crying::crying:
ty.

I managed, appeared "FINISH" and "PASS"
but, he keeps rebooting, and "M" written in the middle and "unlocked"...
:crying::crying::crying:

pablopvh said:
I managed, appeared "FINISH" and "PASS"
but, he keeps rebooting, and "M" written in the middle and "unlocked"...
:crying::crying::crying:
Click to expand...
Click to collapse
I'm new to this phone, but my old motorola defy, when in bootloop, need cache/data wipe.
Start with cache, if still don't work, wipe all data.
Hope it works.

Try this:
Download fastboot file here:
http://koushikdutta.blurryfox.com/G1/
Dezip your xml file which you download before ( http://forum.xda-developers.com/showthread.php?t=1933308 ), take the file "boot.img" and put it on your desktop.
Dezip the files from fastboot.zip on your desktop
On your phone go into fastboot mode and connect it to the pc.
Open a terminal (right click, as administrator), write:
"cd desktop"
and after:
"fastboot flash boot boot.img"
Press enter, wait....
your phone reboot!

Hi,
diogo.sena not work :crying:
PELLET Nolwenn
What do I wrong? PELLET Nolwenn
error: cannot load 'boot.img'
:crying:

pablopvh said:
Hi,
What do I wrong?
error: cannot load 'boot.img'
:crying:
Click to expand...
Click to collapse
I can't see the file boot.img in your directory

The file boot.img is named boot_signed so rename it.
If you don't arrived download the firmware where you come from and dezip it (you'll see it that's obliged)
Sent from my XT890 using xda premium

I discovered what I was doing wrong,
I was with the sd card ...
and he ended up burning :/
Thanks PELLET Nolwenn i love you
Bye :laugh:

Transfert file with ADB

Hi so i flashed the google edition rom and it kept bootlooping, so i went to recovery and wiped everything but it wiped also the ROM file from the sd card now im left with nothing to flash and only recovery i think i have to transfert the file trough ADB if so can anyone give me a tutorial ? i tried adb but there is no devices listed :'( i think its debug mode it wasnt enabled.

JadeAmineHa said:
Hi so i flashed the google edition rom and it kept bootlooping, so i went to recovery and wiped everything but it wiped also the ROM file from the sd card now im left with nothing to flash and only recovery i think i have to transfert the file trough ADB if so can anyone give me a tutorial ? i tried adb but there is no devices listed :'( i think its debug mode it wasnt enabled.
Click to expand...
Click to collapse
USB debugging doesnt matter in custom recovery.
adb push <name of ROM>.zip /data/media/0/
or
adb sideload <name of ROM>.zip
you can always try googling, and come up with a few tutorials:
http://forum.xda-developers.com/showthread.php?t=2317986
http://android-revolution-hd.blogspot.com/2013/12/ow-to-use-adb-sideload.html
http://android-revolution-hd.blogspot.com/2013/12/how-to-copy-rom-zip.html
etc.

This shows device not found when i use adb devices there is nothing

JadeAmineHa said:
This shows device not found when i use adb devices there is nothing
Click to expand...
Click to collapse
Open Device Manager do you see something like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if yes, please go to my guide and check FAQ #2.

nkk71 said:
Open Device Manager do you see something like:
if yes, please go to my guide and check FAQ #2.
Click to expand...
Click to collapse
This is what i see sync manager is installed i tried the fastboot command to get token for boatload unlock and it works but adb is not working, Plase help me i'm stuck :crying: and just to mention that im in bootloader in fastboot usb mode ??

JadeAmineHa said:
This is what i see sync manager is installed i tried the fastboot command to get token for boatload unlock and it works but adb is not working, Plase help me i'm stuck :crying:
Click to expand...
Click to collapse
like i said, just go to my guide and check FAQ #2 (in post #1), http://forum.xda-developers.com/showthread.php?t=2541082
has all the instructions, pictures, etc.

[Q] Can't Open My HTC One M7

Hi all. I've try to install today Android Revolution Google Edition 6.1.
So, my phone is S-OFF, i've install but after boot my phone all time restart. Not open, so, i don't have another rom in my SD card and now, i can't login my sd card for copy. So, i've try too many time from diffrent computer (windows 7 64bit, windows 8 64bit) from cmd and "adb" and i've receive all the time "device not found" error. So, i can flash recovery but "adb" is not work. I've install SDK and install everything but still not show. Any idea?
By the way so sorry for my bad English. Please help me.

soundeluxe said:
Hi all. I've try to install today Android Revolution Google Edition 6.1.
So, my phone is S-OFF, i've install but after boot my phone all time restart. Not open, so, i don't have another rom in my SD card and now, i can't login my sd card for copy. So, i've try too many time from diffrent computer (windows 7 64bit, windows 8 64bit) from cmd and "adb" and i've receive all the time "device not found" error. So, i can flash recovery but "adb" is not work. I've install SDK and install everything but still not show. Any idea?
By the way so sorry for my bad English. Please help me.
Click to expand...
Click to collapse
can you check my guide http://forum.xda-developers.com/showthread.php?t=2541082 under FAQ #2 if that's the problem with Windows Device Manager.
you can disregard the guide only check FAQ #2

nkk71 said:
can you check my guide http://forum.xda-developers.com/showthread.php?t=2541082 under FAQ #2 if that's the problem with Windows Device Manager.
you can disregard the guide only check FAQ #2
Click to expand...
Click to collapse
Thanks for you reply. Actually my drivers looks like ok. Please check image;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"flash" command its ok, but adb still not work :S I've try too many time reinstall driver.

soundeluxe said:
Thanks for you reply. Actually my drivers looks like ok. Please check image;
"flash" command its ok, but adb still not work :S I've try too many time reinstall driver.
Click to expand...
Click to collapse
fastboot commands work in bootloader
adb commands work in custom recovery (eg TWRP) or booted up ROM (with USB debugging enabled)
so if you need adb then enter custom recovery, check your device manager again, because it changes depending on where you are (bootloader, TWRP ... even version matters, or ROM)
once in TWRP, and device manager is good, adb devices should return you serial number and "recovery" -> then you can use adb commands

24945626 720
nkk71 said:
fastboot commands work in bootloader
adb commands work in custom recovery (eg TWRP) or booted up ROM (with USB debugging enabled)
so if you need adb then enter custom recovery, check your device manager again, because it changes depending on where you are (bootloader, TWRP ... even version matters, or ROM)
once in TWRP, and device manager is good, adb devices should return you serial number and "recovery" -> then you can use adb commands
Click to expand...
Click to collapse
Finally. Thank you very much for your help dear @nkk71, i've lost the adb command just work on custom recovery
I've install driver and now everythings its ok, i'm try adb sideload rom.zip

Flash Magisk boot Failed

Hi,
Followed the guide but getting this error. I unlocked boot loader but when tried to flash magisk boot. This error comes. I am on latest Build .Is that be a problem ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

alwynjoshy said:
Hi,
Followed the guide but getting this error. I unlocked boot loader but when tried to flash magisk boot. This error comes. I am on latest Build .Is that be a problem ?
Click to expand...
Click to collapse
Put the patched.img in your platform-tools folder. If it still doesn't work with..fastboot flash boot magisk_patched.img.....then try using command prompt instead of power shell :good:

Badger50 said:
Put the patched.img in your platform-tools folder. If it still doesn't work with..fastboot flash boot magisk_patched.img.....then try using command prompt instead of power shell :good:
Click to expand...
Click to collapse
I tried putting in the folder, still the same error, Will try with using CMD

alwynjoshy said:
I tried putting in the folder, still the same error, Will try with using CMD
Click to expand...
Click to collapse
Your doing this in bootloader mode as well correct?? ?

Yea bro, you see the command, "fastboot devices"

Only thing I can think of at the moment is make sure your fastboot/adb files are the latest ones.
In case you need to download them
https://developer.android.com/studio/releases/platform-tools

alwynjoshy said:
Yea bro, you see the command, "fastboot devices"
Click to expand...
Click to collapse
You need to type in cmd - fastboot flash boot_(whatever slot ur in a or b) magisk_patched.img

Jiggs82 said:
You need to type in cmd - fastboot flash boot_(whatever slot ur in a or b) magisk_patched.img
Click to expand...
Click to collapse
Thanks buddy. It worked for me. Also found one more command, but didn't try, posting just for the info.
fastboot flash —slot=all boot magisk_patched.img

Jiggs82 said:
You need to type in cmd - fastboot flash boot_(whatever slot ur in a or b) magisk_patched.img
Click to expand...
Click to collapse
Deleted

Jiggs82 said:
You need to type in cmd - fastboot flash boot_(whatever slot ur in a or b) magisk_patched.img
Click to expand...
Click to collapse
I only flash slot a, So is there any downside if I didn't flash B slot?