hey guys my htc one m7 is bricked I was about to install a RUU and it required acid/model id change. My bootloader is unlocked. Now all the phone does is vibrate when I try to turn it on. The red led at the top starts to flash if I plug it in. Please help. Thank you very Much in advance. Love you all.
wellitme said:
hey guys my htc one m7 is bricked I was about to install a RUU and it required acid/model id change. My bootloader is unlocked. Now all the phone does is vibrate when I try to turn it on. The red led at the top starts to flash if I plug it in. Please help. Thank you very Much in advance. Love you all.
Click to expand...
Click to collapse
You need to provide more info:
What you did exactly
How did you tried to change your MID and CID
what is your "fastboot getvar all" output?
etc etc...
alray said:
You need to provide more info:
What you did exactly
How did you tried to change your MID and CID
what is your "fastboot getvar all" output?
etc etc...
Click to expand...
Click to collapse
so I was trying to change my model id/cid after I did I pushed this hboot file into my phone via adb and then I changed the cid and then I restarted and the phone wouldnt boot.
wellitme said:
so I was trying to change my model id/cid
Click to expand...
Click to collapse
How exactly?
e.g.
I was trying to change my MID using the MID change tool
or
I was trying to change my MID using the adb "dd" commands
or
I was trying to change my MID using the Eng bootloader method (not recommended btw)
Other useful info:
My original MID was ?????? and I changed it to ?????
My original CID was ?????? and I changed it to ?????
after I did I pushed this hboot file
Click to expand...
Click to collapse
"this" is far from being precise. What hboot file exactly? Link?
into my phone via adb
Click to expand...
Click to collapse
What? You flashed hboot with adb commands?? What command?
Sorry, not trying to be rude but can't help if you don't give any info.
what was your "fastboot getvar all" before the phone died?
@wellitme any news? Still there if you need help, you just need to post the requested info so we can know what you did exactly and tell how to recover (if its possible)...
alray said:
@wellitme any news? Still there if you need help, you just need to post the requested info so we can know what you did exactly and tell how to recover (if its possible)...
Click to expand...
Click to collapse
I used the adb commands.
@alray this was the tutorial I used. http://forum.xda-developers.com/showthread.php?t=2322820
wellitme said:
@alray this was the tutorial I used. http://forum.xda-developers.com/showthread.php?t=2322820
Click to expand...
Click to collapse
I think you are the 4th person this month disregarding the warning in that thread and bricking your phone using this outdated and risky method to change MID.
Is your phone still detected by your computer? Can you still use fastboot commands?
alray said:
I think you are the 4th person this month disregarding the warning in that thread and bricking your phone using this outdated and risky method to change MID.
Is your phone still detected by your computer? Can you still use fastboot commands?
Click to expand...
Click to collapse
No it dosen't.
wellitme said:
No it dosen't.
Click to expand...
Click to collapse
@alray When I connect it it says device enumeration failed.
wellitme said:
@alray When I connect it it says device enumeration failed.
Click to expand...
Click to collapse
What windows version are you using? You need win7 or Linux . Win8 Win10 won't work with the eng bootloader
alray said:
What windows version are you using? You need win7 or Linux . Win8 Win10 won't work with the eng bootloader
Click to expand...
Click to collapse
windows 8 when it bricked now 10
htcone 801n
hi everyone
i have a problem with htc one ,my phone show me only in fastboot if i restart it again enter fastboot if i made factory rest again in fastboot and i cant make recorvery and here the picture
thank you and i hope can someone help me
wellitme said:
windows 8 when it bricked now 10
Click to expand...
Click to collapse
Sorry for the late reply, Try on a windows 7 computer. You will not be able to use fastboot commands with the hboot 1.43 (eng hboot) and windows 8/10.
---------- Post added at 05:06 PM ---------- Previous post was at 05:05 PM ----------
da_segal said:
hi everyone
i have a problem with htc one ,my phone show me only in fastboot if i restart it again enter fastboot if i made factory rest again in fastboot and i cant make recorvery and here the picture
thank you and i hope can someone help me
Click to expand...
Click to collapse
1- what caused your issue exactly? Did you flashed something?
2- what is your "fastboot getvar all" ?
alray said:
Sorry for the late reply, Try on a windows 7 computer. You will not be able to use fastboot commands with the hboot 1.43 (eng hboot) and windows 8/10.
---------- Post added at 05:06 PM ---------- Previous post was at 05:05 PM ----------
1- what caused your issue exactly? Did you flashed something?
2- what is your "fastboot getvar all" ?
Click to expand...
Click to collapse
i tried to unlock but something happen .my htc one go to fastboot only and i cant go to recovery my Usb cable show fastboot on but i cant do nothing at all ,i dont know what to know
da_segal said:
i tried to unlock but something happen
Click to expand...
Click to collapse
What you did exactly when you tried to unlock, try to be more precise, it will help us understand and we'll be easier to help you.
my htc one go to fastboot only and i cant go to recovery
Click to expand...
Click to collapse
Ok so if I understand correctly, you rphone can't boot in the OS and neither in recovery, only in fastboot mode. What it is doing when trying to boot in recovery mode?
my Usb cable show fastboot on
Click to expand...
Click to collapse
Is it showing "fastboot" only or "fastboot usb" ?
but i cant do nothing at all ,i dont know what to know
Click to expand...
Click to collapse
Can you still use fastboot commands? If yes post the output of "fastboot getvar all" (don't post imei nor s/n). Also post all the info you can see from the bootloader menu.
alray said:
What you did exactly when you tried to unlock, try to be more precise, it will help us understand and we'll be easier to help you.
Ok so if I understand correctly, you rphone can't boot in the OS and neither in recovery, only in fastboot mode. What it is doing when trying to boot in recovery mode?
Is it showing "fastboot" only or "fastboot usb" ?
Can you still use fastboot commands? If yes post the output of "fastboot getvar all" (don't post imei nor s/n). Also post all the info you can see from the bootloader menu.
Click to expand...
Click to collapse
yes i can use fastboot ,if i can go to recovery it take me again to fastboot , thank you for replay if u want to can send you imei or anything u want please help me
da_segal said:
yes i can use fastboot,(...) thank you for replay if u want to can send you imei or anything u want please help me
Click to expand...
Click to collapse
I need all the info from the "fastboot getvar all" commands excluding the IMEI and SERIALNO
if i can go to recovery it take me again to fastboot
Click to expand...
Click to collapse
Did you flashed a custom recovery or the phone still have the stock one?
I would also appreciate if you could answer the 3 other questions asked in my previous post.
alray said:
What you did exactly when you tried to unlock, try to be more precise, it will help us understand and we'll be easier to help you.
Ok so if I understand correctly, you rphone can't boot in the OS and neither in recovery, only in fastboot mode. What it is doing when trying to boot in recovery mode?
Is it showing "fastboot" only or "fastboot usb" ?
Can you still use fastboot commands? If yes post the output of "fastboot getvar all" (don't post imei nor s/n). Also post all the info you can see from the bootloader menu.
Click to expand...
Click to collapse
fastboot usb even i rastart my phone it take me to fastboot usb if u want i can show u in pm the pictures
alray said:
What you did exactly when you tried to unlock, try to be more precise, it will help us understand and we'll be easier to help you.
Ok so if I understand correctly, you rphone can't boot in the OS and neither in recovery, only in fastboot mode. What it is doing when trying to boot in recovery mode?
Is it showing "fastboot" only or "fastboot usb" ?
Can you still use fastboot commands? If yes post the output of "fastboot getvar all" (don't post imei nor s/n). Also post all the info you can see from the bootloader menu.
Click to expand...
Click to collapse
Did you flashed a custom recovery or the phone still have the stock one?
Click to expand...
Click to collapse
da_segal said:
fastboot usb
Click to expand...
Click to collapse
Fine so you should be able to use fastboot commands. Try this one:
Code:
fastboot getvar all
copy/paste the output here (but not the IMEI nor the serialno)
Still need to know what quoted in red.
Related
Hi
i was trying to run a 1.28 ruu on my 2.19 base...it failed withan error 140.
Now i am stuck in bootloader and if i select recovery or reboot or fsctory reset, i always come back to the bootloader.
what can i do to solve this problem andhavea working phone again ? i wanted to do s-off, but my laptop is not finding my device in adb mode. Fastboot usb is working on the phone.
any idea ?
thx
L
lionel7 said:
Hi
i was try to run a 1.28 ruu on my 2.19 base...it failed withan error 140.
Now i am stuck in bootloader and if i select recovery or reboot or fsctory reset, i always come back to the bootloader.
what can i do to solve this problem andhavea working phone again ? i wanted to do s-off, but my laptop is not finding my device in adb mode. Fastboot usb is working on the phone.
any idea ?
thx
L
Click to expand...
Click to collapse
Can someone help me ?
Thx
1)Goto bootlader - > fastmode , and flash custom recovery again.
2) When receive custom recovery, flash rom.
3) Get S-OFF, and only when try to flash RUU, without S-OFF you can't downgrade from 2.19 to 1.28
tash2013 said:
1)Goto bootlader - > fastmode , and flash custom recovery again.
2) When receive custom recovery, flash rom.
3) Get S-OFF, and only when try to flash RUU, without S-OFF you can't downgrade from 2.19 to 1.28
Click to expand...
Click to collapse
Thx, but my laptop is not recognizing my device in adb mode . My phone shows fastboot USB tough...
Strange no ?
Why you need adb?
Flash recovery via fastboot.. type
1) fastboot flash recovery your_recovery_image.img
2) fastboot erase cache
tash2013 said:
Why you need adb?
Flash recovery via fastboot.. type
1) fastboot flash recovery your_recovery_image.img
2) fastboot erase cache
Click to expand...
Click to collapse
Probably to push the custom rom onto the SD card in order to flash it in recovery
MacHackz said:
Probably to push the custom rom onto the SD card in order to flash it in recovery
Click to expand...
Click to collapse
When he will receive working recovery with sideload support, the adb sideload command will be work fine as there will be a support interface(protocol) from recovery.
Did you relock? What error did you get? Was it the right ruu.
lionel7 said:
Thx, but my laptop is not recognizing my device in adb mode . My phone shows fastboot USB tough...
Strange no ?
Click to expand...
Click to collapse
What does your device manager on the laptop show? Try different usb port. stay away from usb 3.0 ports to be safe. sometimes i have to unplug and replug before the phone shows..Also reboot laptop if still dont see it.
---------- Post added at 06:00 PM ---------- Previous post was at 05:56 PM ----------
tash2013 said:
Why you need adb?
Flash recovery via fastboot.. type
1) fastboot flash recovery your_recovery_image.img
2) fastboot erase cache
Click to expand...
Click to collapse
Pretty sure he meant his laptop isnt seeing his phone. Cant do those commands you suggested unless phone shows to be connected..
nugzo said:
What does your device manager on the laptop show? Try different usb port. stay away from usb 3.0 ports to be safe. sometimes i have to unplug and replug before the phone shows..Also reboot laptop if still dont see it.
---------- Post added at 06:00 PM ---------- Previous post was at 05:56 PM ----------
Pretty sure he meant his laptop isnt seeing his phone. Cant do those commands you suggested unless phone shows to be connected..
Click to expand...
Click to collapse
The phrase from OP in the first post: "Fastboot usb is working on the phone."
tash2013 said:
The phrase from OP in the first post: "Fastboot usb is working on the phone."
Click to expand...
Click to collapse
Fastboot and ADB are two very different modes.
The phone can be detected in fastboot and not be detected in dab, either due to a driver issue or bad usb cable.
MacHackz said:
Fastboot and ADB are two very different modes.
The phone can be detected in fastboot and not be detected in dab, either due to a driver issue or bad usb cable.
Click to expand...
Click to collapse
I'm sorry, what do you try to explain to me? I know about these modes.
Please read carefully dialogs and why my phrase was told.
At a topic starter works fastboot, but adb doesn't work, ADB and NOT WILL fully work without OS on phone. he tries something to do with phone using adb, way in anywhere in case of its situation.
tash2013 said:
I'm sorry, what do you try to explain to me? I know about these modes.
Please read carefully dialogs and why my phrase was told.
At a topic starter works fastboot, but adb doesn't work, ADB and NOT WILL fully work without OS on phone. he tries something to do with phone using adb, way in anywhere in case of its situation.
Click to expand...
Click to collapse
You're saying ADB won't work with no OS?
Go wipe your system and be amazed when ADB still works ;D
MacHackz said:
You're saying ADB won't work with no OS?
Go wipe your system and be amazed when ADB still works ;D
Click to expand...
Click to collapse
I wrote "fully work" , try to go adb shell without OS?
tash2013 said:
I wrote "fully work" , try to go adb shell without OS?
Click to expand...
Click to collapse
Okay, adb shell has nothing to do with this.
Take a look at my guide for ADB below to help you understand the push process
MacHackz said:
Okay, adb shell has nothing to do with this.
Take a look at my guide for ADB below to help you understand the push process
Click to expand...
Click to collapse
OK, please explain to me, how I can flash recovery using adb, without OS?
tash2013 said:
OK, please explain to me, how I can flash recovery using adb, without OS?
Click to expand...
Click to collapse
You flash recovery using fastboot mode in HBOOT... ADB is for pushing the rom to the phone in recovery :cyclops:
MacHackz said:
You flash recovery using fastboot mode in HBOOT... ADB is for pushing the rom to the phone in recovery :cyclops:
Click to expand...
Click to collapse
YES! Without OS, only one way to flash recovery - fastboot! Therefore I advise to OP to forget adb, to flash recovery.
tash2013 said:
YES! Without OS, only one way to flash recovery - fastboot! Therefore I advise to OP to forget adb, to flash recovery.
Click to expand...
Click to collapse
I see I see, I think he already did that though He's having issues getting adb to work in recovery
MacHackz said:
I see I see, I think he already did that though He's having issues getting adb to work in recovery
Click to expand...
Click to collapse
if I correctly understood his first post, he can't come in recovery at all.. reset to bootloader.
Howdy,
when I try to install custom recovery on my HTC One, nothing happens.
On the HTC One screen I have in red written FastBoot USB, but when I try to install it nothing happens.
It's says "waiting the device".
I included a screen of my CMD.
I really don't know whats wrong? USB Debugging is enabled.
P.S.: It seems I have trouble with regonizing the phone in windows 8, but I have installed HTC Drivers version 4
Thanks in advance!
Cheers,
David
Just put the .img file in your fastboot folder and type: fastboot flash recovery clockwork-touch-6.0.4.5-m7ul.img
Marc199 said:
Just put the .img file in your fastboot folder and type: fastboot flash recovery clockwork-touch-6.0.4.5-m7ul.img
Click to expand...
Click to collapse
I've done that but nothing happens! The notice in the CMD is still there <waiting for device>? Dunno why...
Daichisan said:
I've done that but nothing happens! The notice in the CMD is still there <waiting for device>? Dunno why...
Click to expand...
Click to collapse
Did you put your phone in fastboot mode? Power + vol down. in command prompt type fastboot devices - if you see your device then you good to go.
---------- Post added at 01:13 PM ---------- Previous post was at 01:09 PM ----------
rocktv88 said:
Did you put your phone in fastboot mode? Power + vol down. in command prompt type fastboot devices - if you see your device then you good to go.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2579231
clsA posted:
"windows 8.1 will not work on hboot below 1.54.000 (the only 1.54 that works is from the new GPE 4.4 update).
your going to need access to a windows 7 PC long enough to update your hboot to 1.55 to be able to use fastboot with your phone again. This usually only happens while flashing a RUU not A Rom. Flashing a rom will not affect your version of hboot "
rocktv88 said:
Did you put your phone in fastboot mode? Power + vol down. in command prompt type fastboot devices - if you see your device then you good to go.
---------- Post added at 01:13 PM ---------- Previous post was at 01:09 PM ----------
http://forum.xda-developers.com/showthread.php?t=2579231
clsA posted:
"windows 8.1 will not work on hboot below 1.54.000 (the only 1.54 that works is from the new GPE 4.4 update).
your going to need access to a windows 7 PC long enough to update your hboot to 1.55 to be able to use fastboot with your phone again. This usually only happens while flashing a RUU not A Rom. Flashing a rom will not affect your version of hboot "
Click to expand...
Click to collapse
My HBOOT version is 1.55.0000, this should work on windows 8 right?
Daichisan said:
My HBOOT version is 1.55.0000, this should work on windows 8 right?
Click to expand...
Click to collapse
sorry, I am not sure. I am using Windows 7. May be you can try to ask clsA for more info.
LOL, I really don't know what have I done, but now it works. I've installed custom rom and superuser.
Thanks anyway!
Daichisan said:
LOL, I really don't know what have I done, but now it works. I've installed custom rom and superuser.
Thanks anyway!
Click to expand...
Click to collapse
:good:
hi i tried to update my viper rom and now my phone just reboots continuously why and how can this be fixed?
Gav6363 said:
hi i tried to update my viper rom and now my phone just reboots continuously why and how can this be fixed?
Click to expand...
Click to collapse
can you check the last post in the FAQ sticky thread: http://forum.xda-developers.com/showthread.php?p=53270352&postcount=21
see if that helps. please do not post questions there, if you still have problems, post back here.
nkk71 said:
can you check the last post in the FAQ sticky thread: http://forum.xda-developers.com/showthread.php?p=53270352&postcount=21
see if that helps. please do not post questions there, if you still have problems, post back here.
Click to expand...
Click to collapse
I dont know what any of this means i my cousin rooted my phone and he no longer lives near me
Gav6363 said:
I dont know what any of this means i my cousin rooted my phone and he no longer lives near me
Click to expand...
Click to collapse
I'm not sure how to respond to that
Are you familiar with terms such as adb, fastboot, custom recovery?
nkk71 said:
I'm not sure how to respond to that
Are you familiar with terms such as adb, fastboot, custom recovery?
Click to expand...
Click to collapse
a bit yes
Gav6363 said:
a bit yes
Click to expand...
Click to collapse
then please post
1- a "fastboot getvar all" (excluding IMEI and s/n)
2- which recovery you have (name and version number)
3- what were you trying to flash? link please
nkk71 said:
then please post
1- a "fastboot getvar all" (excluding IMEI and s/n)
2- which recovery you have (name and version number)
3- what were you trying to flash? link please
Click to expand...
Click to collapse
Ive no idea what you just said. my phone wont go in recovery
Gav6363 said:
my phone wont go in recovery
Click to expand...
Click to collapse
why not?
nkk71 said:
why not?
Click to expand...
Click to collapse
it tries going in recovery then the screen goes black and then the a white screen with htc in the middle and red writing at the bottom comes up and then this keeps repeating. All my phones does
nkk71 said:
then please post
1- a "fastboot getvar all" (excluding IMEI and s/n)
2- which recovery you have (name and version number)
3- what were you trying to flash? link please
Click to expand...
Click to collapse
not sure what recovery
Gav6363 said:
IMIE;
it was the new viper rom
Click to expand...
Click to collapse
please edit your post and remove those, those are the only two things, i did not want posted
nkk71 said:
please edit your post and remove those, those are the only two things, i did not want posted
Click to expand...
Click to collapse
Done now what? i have a white screen with 3 androids on skateboards on the bottom. at the i have tampered and under that i have unlocked. under that i have a load of green writing, under that i have HBOOT. under that i have FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK, IMAGE CRC AND SHOW BARCODE
Gav6363 said:
Done now what? i have a white screen with 3 androids on skateboards on the bottom. at the i have tampered and under that i have unlocked. under that i have a load of green writing, under that i have HBOOT. under that i have FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK, IMAGE CRC AND SHOW BARCODE
Click to expand...
Click to collapse
get this: http://www.androidfilehost.com/?fid=23329332407585867
extract those files to a folder on your PC, then open a command prompt and go to that folder, connect your phone
press the POWER button to select FASTBOOT, it should change to FASTBOOT USB
in the command prompt type:
fastboot getvar all
and post the result (without IMEI and s/n)
nkk71 said:
get this: http://www.androidfilehost.com/?fid=23329332407585867
extract those files to a folder on your PC, then open a command prompt and go to that folder, connect your phone
press the POWER button to select FASTBOOT, it should change to FASTBOOT USB
in the command prompt type:
fastboot getvar all
and post the result (without IMEI and s/n)
Click to expand...
Click to collapse
i cant extract nothing it says i have to pick a program ???
Gav6363 said:
i cant extract nothing it says i have to pick a program ???
Click to expand...
Click to collapse
I don't think I'll be able to help you. Sorry
nkk71 said:
I don't think I'll be able to help you. Sorry
Click to expand...
Click to collapse
right i have got the files on my pc now. had to download a program
nkk71 said:
I don't think I'll be able to help you. Sorry
Click to expand...
Click to collapse
i have got command prompt open now. I have tried to type in the name of the file but it comes up with its not recognized
nkk71 said:
get this: http://www.androidfilehost.com/?fid=23329332407585867
extract those files to a folder on your PC, then open a command prompt and go to that folder, connect your phone
press the POWER button to select FASTBOOT, it should change to FASTBOOT USB
in the command prompt type:
fastboot getvar all
and post the result (without IMEI and s/n)
Click to expand...
Click to collapse
what do i type in on command prompt to go to the folder you wanted me to do?
I was wondering if you could help me with this. Recently I had bought a new Htc one m7 and the phone was on s-off. I tried to update to kitkat 4.4 and sense 5.5 but "/system/customize/CID/default.xml" has an unexpected contents" this error popped up and the installation was aborted. I had a read around the forums and you said it was because default.xml was edited or modified. So how would I restore the original. I know nothing about phones. Sorry for the troubles, please help :fingers-crossed:. Thank you
Help
John McDee said:
I was wondering if you could help me with this. Recently I had bought a new Htc one m7 and the phone was on s-off. I tried to update to kitkat 4.4 and sense 5.5 but "/system/customize/CID/default.xml" has an unexpected contents" this error popped up and the installation was aborted. I had a read around the forums and you said it was because default.xml was edited or modified. So how would I restore the original. I know nothing about phones. Sorry for the troubles, please help :fingers-crossed:. Thank you
Click to expand...
Click to collapse
@alray help
John McDee said:
I was wondering if you could help me with this. Recently I had bought a new Htc one m7 and the phone was on s-off. I tried to update to kitkat 4.4 and sense 5.5 but "/system/customize/CID/default.xml" has an unexpected contents" this error popped up and the installation was aborted. I had a read around the forums and you said it was because default.xml was edited or modified. So how would I restore the original. I know nothing about phones. Sorry for the troubles, please help :fingers-crossed:. Thank you
Click to expand...
Click to collapse
Do you have adb/fastboot and latest htc drivers on your computer? We will need to see the output of "fastboot getvar all" command so we can determine what you need to do to take the ota or to restore the phone back to stock.
When posting the output of "fastboot getvar all" edit out the imei and serialno.
alray said:
Do you have adb/fastboot and latest htc drivers on your computer? We will need to see the output of "fastboot getvar all" command so we can determine what you need to do to take the ota or to restore the phone back to stock.
When posting the output of "fastboot getvar all" edit out the imei and serialno.
Click to expand...
Click to collapse
I have no idea
alray said:
Do you have adb/fastboot and latest htc drivers on your computer? We will need to see the output of "fastboot getvar all" command so we can determine what you need to do to take the ota or to restore the phone back to stock.
When posting the output of "fastboot getvar all" edit out the imei and serialno.
Click to expand...
Click to collapse
I don't have them installed
John McDee said:
I have no idea
Click to expand...
Click to collapse
go to this thread: http://forum.xda-developers.com/showthread.php?t=2317790
follow instructions how to install adb and fastboot on your computer
Then go there: http://www.htc.com/us/support/software/htc-sync-manager.aspx
and install htc sync, then uninstall it but keep the drivers installed.
plug your phone to your computer using the usb cable
reboot phone in bootloader mode by holding both the power button and volume down until you see a white screen
open the adb/fastboot command prompt: start menu --> Programs --> Minimal adb and fastboot --> Minimal adb and fastboot
in the command prompt type:
Code:
fastboot getvar all
This will output your phone information
copy paste the ouput and post it here (excpet the IMEI and SERIALNO)
alray said:
go to this thread: http://forum.xda-developers.com/showthread.php?t=2317790
follow instructions how to install adb and fastboot on your computer
Then go there: http://www.htc.com/us/support/software/htc-sync-manager.aspx
and install htc sync, then uninstall it but keep the drivers installed.
plug your phone to your computer using the usb cable
reboot phone in bootloader mode by holding both the power button and volume down until you see a white screen
open the adb/fastboot command prompt: start menu --> Programs --> Minimal adb and fastboot --> Minimal adb and fastboot
in the command prompt type:
Code:
fastboot getvar all
This will output your phone information
copy paste the ouput and post it here (excpet the IMEI and SERIALNO)
Click to expand...
Click to collapse
What do you mean by install htc sync, then uninstall it but keep the drivers installed?
John McDee said:
What do you mean by install htc sync, then uninstall it but keep the drivers installed?
Click to expand...
Click to collapse
You only need to install htc sync because it will install HTC drivers at the same time. HTC sync can interfere with what you'll need to do that's why you have to uninstall it after. Just uninstall HTC sync and drivers will still be on your computer unless you uninstall them manually.
alray said:
You only need to install htc sync because it will install HTC drivers at the same time. HTC sync can interfere with what you'll need to do that's why you have to uninstall it after. Just uninstall HTC sync and drivers will still be on your computer unless you uninstall them manually.
Click to expand...
Click to collapse
Do I need to turn on usb debugging?
John McDee said:
Do I need to turn on usb debugging?
Click to expand...
Click to collapse
Yes turn on usb debugging, we will probably need it later.
alray said:
Yes turn on usb debugging, we will probably need it later.
Click to expand...
Click to collapse
the cmd just said waiting for device
John McDee said:
the cmd just said waiting for device
Click to expand...
Click to collapse
your phone is booted in bootloader right? does it says "fastboot usb" in red ?
alray said:
your phone is booted in bootloader right? does it says "fastboot usb" in red ?
Click to expand...
Click to collapse
if i go into fastboot yes
John McDee said:
if i go into fastboot yes
Click to expand...
Click to collapse
then redo the command it should work now
alray said:
then redo the command it should work now
Click to expand...
Click to collapse
my computer says it does not recognise usb
John McDee said:
my computer says it does not recognise usb
Click to expand...
Click to collapse
go in windows devices manager, is your phone listed as ''Android USB Device --> My HTC'' or something else?
Are you using USB 2.0 ports directly on the computer? (no external hub?)
cannot find "android use device" but i am connecting directly to the pc
alray said:
go in windows devices manager, is your phone listed as ''Android USB Device --> My HTC'' or something else?
Are you using USB 2.0 ports directly on the computer? (no external hub?)
Click to expand...
Click to collapse
Yes it is listed as Android USB Device once I exited bootloader
John McDee said:
Yes it is listed as Android USB Device once I exited bootloader
Click to expand...
Click to collapse
I want to know what does it said when booted in bootloader, same thing or not? if not what does it says?
alray said:
I want to know what does it said when booted in bootloader, same thing or not? if not what does it says?
Click to expand...
Click to collapse
the lists disappears
Hi all,
I am sure there are many ways to go back to HTC's official from Cyanogenmod 11 but is there an easy way (user friendly) to do that?
For example, Cyanogenmod installation is very nice done, it installs everything automatically. Is there something like this?
Information about the device:
HTC One (M7)
CyanogenMod version: 11.0
Android: 4.4.4
Thank you in advance,
Erevantsi
Erevantsi said:
Cyanogenmod installation is very nice done, it installs everything automatically. Is there something like this?
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" remove imei and serialno before posting.
alray said:
Post the output of "fastboot getvar all" remove imei and serialno before posting.
Click to expand...
Click to collapse
Sorry what do you exactly mean with Post the output of "fastboot getvar all" remove imei and serialno
Erevantsi said:
Sorry what do you exactly mean with Post the output of "fastboot getvar all" remove imei and serialno
Click to expand...
Click to collapse
time to do some reading. You'll need adb and fastboot intalled on your computer (either by installing the android sdk or miniaml adb and fastboot). You'll also need latest HTC drivers installed on your computer. Once done, reboot your phone in bootloader mode, select fastboot usb mode, connect the phone to your PC. Open a command prompt from your adb/fastboot folder. type:
Code:
fastboot getvar all
copy/paste the output here so we can determine what you need to return stock. Don't post the IMEI and Serialno.
Erevantsi said:
Sorry what do you exactly mean with Post the output of "fastboot getvar all" remove imei and serialno
Click to expand...
Click to collapse
I am not being rude but this is what happens when you do something but dont understand what your doing.
Flashing ones device is not supposed to be easy. Mainly as it could easily brick a device and now that you have no warranty, you would be pretty mad if you had to get a new device because you didnt understand what you were doing
alray said:
time to do some reading. You'll need adb and fastboot intalled on your computer (either by installing the android sdk or miniaml adb and fastboot). You'll also need latest HTC drivers installed on your computer. Once done, reboot your phone in bootloader mode, select fastboot usb mode, connect the phone to your PC. Open a command prompt from your adb/fastboot folder. type:
Code:
fastboot getvar all
copy/paste the output here so we can determine what you need to return stock. Don't post the IMEI and Serialno.
Click to expand...
Click to collapse
Thank you for the information Alray. I'll have to do some research as I understood. Thanks for your time and attention. :good: