I wasn't paying attention and I messed up. I was planning on flashing AllianceROM to the latest version, and without thinking I downloaded the zip file and started to flash. In the middle of the process, my phone shut off suddenly, and now it won't even turn on. I plug it in and the computer doesn't register anything.
I realized that I flashed it with this: http://forum.xda-developers.com/gal...lliancerom-v9-available-changelog-op-t2037363, which is for the Galaxy S2.
Have I completely messed up? Is this phone basically irreparable? I can't go into safe mode or anything like that. And I've obviously voided the warranty...
If you can't get into Odin mode or Recovery, then yes, unfortunately you bricked it.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
*FaNDroID* said:
If you can't get into Odin mode or Recovery, then yes, unfortunately you bricked it.
Click to expand...
Click to collapse
Would it be "fixed" if I got the motherboard replaced? How about jtagging or usb jig?
I should still be under warranty but Samsung says I need proof of purchase even though they know the purchase date. I seem to have misplaced the receipt and it's making me want to tear my hair out because they're basically avoiding having to help me. (I understand this was my fault but they're blatantly saying I have no warranty.)
Probably need a new motherboard. If you can't get it to power up at all.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
*FaNDroID* said:
Probably need a new motherboard. If you can't get it to power up at all.
Click to expand...
Click to collapse
How much would it cost me to get a new one, and where could I get one?
Or would it be cheaper to make an appointment at SoHo Samsung Studio and have them repair it for me?
Don't know, personally I'd try and find a busted s5 on eBay. One with a broken screen and clean IMEI
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Have you tried to see if it will boot from Ext-SD? I've heard of a few successful hard brick recoveries from this method.
http://forum.xda-developers.com/showthread.php?t=2476353
http://forum.xda-developers.com/showthread.php?t=2834419
nutt_case said:
Have you tried to see if it will boot from Ext-SD? I've heard of a few successful hard brick recoveries from this method.
http://forum.xda-developers.com/showthread.php?t=2476353
http://forum.xda-developers.com/showthread.php?t=2834419
Click to expand...
Click to collapse
Thanks for the reply! These are for different phones though. And where would I find this unbrick image?
senoppai said:
Thanks for the reply! These are for different phones though. And where would I find this unbrick image?
Click to expand...
Click to collapse
It can be done for the g900a you just gotta find a debrick image. There was one in this thread but not sure if it's still active or not.
http://forum.xda-developers.com/showthread.php?t=3085344
nutt_case said:
It can be done for the g900a you just gotta find a debrick image. There was one in this thread but not sure if it's still active or not.
http://forum.xda-developers.com/showthread.php?t=3085344
Click to expand...
Click to collapse
I read a bit into the threads and one person said that if the computer won't even recognize it then I probably am out of luck? Is this true?
Edit: I tried using Win32DiskImager, and it did not work. I press the power button and it wont turn on, and as usual the computer wont recognize it.
senoppai said:
I read a bit into the threads and one person said that if the computer won't even recognize it then I probably am out of luck? Is this true?
Edit: I tried using Win32DiskImager, and it did not work. I press the power button and it wont turn on, and as usual the computer wont recognize it.
Click to expand...
Click to collapse
Not sure about the computer....i think it usually shows QHUSB_BULK when hard bricked...again not sure though.
If it's not powering on with a properly flashed debrick SD card then your probably going to need jtag or new board.
Related
So i am a complete idiot and just bricked a phone yesterday and luckily managed to get it exchanged at att.
The new one is having tons of trouble getting into download mode using the button combinations. I wanted to load the I9000 euro roms as I had successfully done to my previous phone. I did the first step in loading the csc and pda files and accidently forgot to uncheck autoreboot. Anyways... I pulled the battery out before it could reboot. I still couldnt get it into download mode so I booted into the android without applying the second step of the pit fil and the modem file. I am not used to using the sdk so was planning to root and intall a terminal program to "su reboot download"... I tried using the oneclick root to complete the job and it rebooted me into recovery, but apparently since i didnt flash the pit file, my power button doesnt work to access the menu..(volume rocker does).
Now it wont boot into anything except into recovery and I cant do anything about in it.... i have tried everything on oneclick odin instructions and can not get there... is there anything i can do from the sdk to get into download mode... it kind of appears that my phone is recognized when i plug it in cuz windows beeps saying that it recognizes the device...
HELP ME PLEASEEEEE
I THINK I DESPERATELY NEED TO GET INTO DOWNLOAD MODE SOMEHOW!!!
I HAVE TRIED EVERY WAY LISTED ON
http://forum.xda-developers.com/showthread.php?t=731989
use method 3
Wrong forum, but how in the world did you "brick" your last phone? These phones from what lots of smart people say are not brickable, and these guys on here have tried. And if you did in fact brick your old phone why would you decide to put another ROM on?
First calm down. If it boots you are ok.
You can do what Akachay said. Or pull the battery unplug the usb. Start odin put the battery back in hold down both volume keys then plug in the usb cable it should boot into download mode.
It is very hard to brick this phone
IllegalOpcode said:
First calm down. If it boots you are ok.
You can do what Akachay said. Or pull the battery unplug the usb. Start odin put the battery back in hold down both volume keys then plug in the usb cable it should boot into download mode.
It is very hard to brick this phone
Click to expand...
Click to collapse
Do this. The phone has to be off. Hold both volume buttons and plug in the usb. It will into dl mode. No power button necessary.
Sent from my SAMSUNG-SGH-I897 using XDA App
IllegalOpcode said:
First calm down. If it boots you are ok.
You can do what Akachay said. Or pull the battery unplug the usb. Start odin put the battery back in hold down both volume keys then plug in the usb cable it should boot into download mode.
It is very hard to brick this phone
Click to expand...
Click to collapse
I second this method. Calm down and take your time. It WILL work trust me ive used it a few times on both my captivate and vibrant.
Sent from my SGH-T959 using XDA App
I third that the volume button method.... I pull the battery, reinstall it, plug in usb, hold down volume buttons. Works every time. Any other method is a total crap shoot.
If using Odin make sure its open before you do this so that it will recognize the connection.
If you can talk to the phone with adb you can also try "adb reboot download".
Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks so much to the help and support... seriously the buttons for download mode did not work... had to learn the adb sdk method
Sent from my SAMSUNG-SGH-I897 using XDA App
xmarkx88 said:
Thanks so much to the help and support... seriously the buttons for download mode did not work... had to learn the adb sdk method
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Its always a good skill to know
This is not the Q&A section of the captivate...please next time UTFS of this lovely forum, and post it on the right section.
Rafyvitto
flashman2002 said:
Wrong forum, but how in the world did you "brick" your last phone? These phones from what lots of smart people say are not brickable, and these guys on here have tried. And if you did in fact brick your old phone why would you decide to put another ROM on?
Click to expand...
Click to collapse
Why do people say its impossible to completely brick the phone? Unfortunately I did it due to stupidity, and it bricked quite easily.
Coriolis3ffect said:
Why do people say its impossible to completely brick the phone? Unfortunately I did it due to stupidity, and it bricked quite easily.
Click to expand...
Click to collapse
People say that because the word "brick" is thrown around quite liberally. These phones have been nearly impossible to legitimately brick. About the only way I can think of is spontaneous hardware failure
OP, I thought I bricked it yesterday but d/l method works, don't worry...
moving my own issue here as i think i really HAVE bricked the phone. did alot of reading but apparently still did it wrong. flashed the PIT file only to the phone and now ive got a lovely and not very heavy paperweight. does not even turn on using the power or volume combo even after i pulled the battery for 5 minutes. Any clues? im pretty sad about this.. read that its pretty hard to brick these phones but im not so sure that is the case
ill also mention i was being dumb and didnt realize i was on the i9000 page reading instructions at the time. i was using the instructions from here http://forum.xda-developers.com/showthread.php?t=765032 and the problem occured after i flashed the pit successfully and then was resetting the battery when i found out it was completly dead
bamonkey said:
ill also mention i was being dumb and didnt realize i was on the i9000 page reading instructions at the time. i was using the instructions from here http://forum.xda-developers.com/showthread.php?t=765032 and the problem occured after i flashed the pit successfully and then was resetting the battery when i found out it was completly dead
Click to expand...
Click to collapse
Seems lately over on the odin3 page alot of people are doing dumb things just like me. looks like ill be able to return it in the next few days but i just want to stress that while people are stating its really hard to brick these phones i would NOT recommend doing any kind of firm flashes unless you are totally comfortable with exact instructions or turning your phone into a complete brick and getting a warranty exchange. I hate to say it but im a little unsure of myself on these firmware upgrades now. its not really a click-and-be-done process yet so i think ill just hold out and hope the froyo upgrade fixes the gps issue because otherwise i still love this phone
I cannot get phone to do ANYthing...no boot into download, no recovery boot, no phone!computer symbol, NOTHING...is it possible I throughly bricked it? Please someone say no
U tried holding down vol up and down while plugging in the usb already connected to pc?
Sent from my SAMSUNG-SGH-I897 using XDA App
Mrpotato00 said:
U tried holding down vol up and down while plugging in the usb already connected to pc?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
This.
I had the same issue and thought I had bricked it... If you plug the USB cable into the computer but not into the phone, then pull the battery out of the back, wait 30 seconds, put the battery back in and put the cover on, hold down both buttons at the same time and while holding them, stick the micro part of the SD cable into the phone, it boots into download mode.
tried both these, and a couple other combos i've found and nothing works.
Have you tried the 300k/301k/302k ohm USB jig?
norcal einstein said:
Have you tried the 300k/301k/302k ohm USB jig?
Click to expand...
Click to collapse
It worked for me and so easy to make. Here is the link http://forum.xda-developers.com/showthread.php?t=819551
norcal einstein said:
Have you tried the 300k/301k/302k ohm USB jig?
Click to expand...
Click to collapse
um...could you point me to what you mean?
Original Thread:
http://forum.xda-developers.com/showthread.php?t=819551
"Solderless" Version of Jig w/ Pictures:
http://forum.xda-developers.com/showthread.php?t=841512
How many times must it be said?!?!?! QUESTIONS GO IN THE Q&A SECTION! there are posts like this every single day in the development section. Does anybody ever learn (or know how to use the search feature?)?!
tdbgamer said:
How many times must it be said?!?!?! QUESTIONS GO IN THE Q&A SECTION! there are posts like this every single day in the development section. Does anybody ever learn (or know how to use the search feature?)?!
Click to expand...
Click to collapse
Some people find it easier to explain their own problems than to read through others' problems to determine their fix. If you don't have the desire to help me out, then don't post in this thread. Your thoughts on how this forum could be improved aren't contributing to the fix of my phone so why bother?
I have the same problem. JIG doesn't help at all. BTW, I made two cable and tested on a working captivate. the JIG cable does work. It's just not working on the complete-bricked phone.
I tried any method I could find on the forum and nothing works. I don't even know how a successful flash (reported by ODIN) and the phone reboot itself and then complete dead after that.
so if I filed a claim for insurance no one be the wiser about me having unauthorized software on my phone?
bunnsguy said:
I cannot get phone to do ANYthing...no boot into download, no recovery boot, no phone!computer symbol, NOTHING...is it possible I throughly bricked it? Please someone say no
Click to expand...
Click to collapse
Do. You get atnt screen? Or just black screen? Does your computer recognize your phone? If your computer reconize your phone pm me I will help you.
Sent from my T-Mobile G2 using XDA App
PowerPC said:
I have the same problem. JIG doesn't help at all. BTW, I made two cable and tested on a working captivate. the JIG cable does work. It's just not working on the complete-bricked phone.
I tried any method I could find on the forum and nothing works. I don't even know how a successful flash (reported by ODIN) and the phone reboot itself and then complete dead after that.
Click to expand...
Click to collapse
dude you got any luck?
same situation here....
bunnsguy said:
I cannot get phone to do ANYthing...no boot into download, no recovery boot, no phone!computer symbol, NOTHING...is it possible I throughly bricked it? Please someone say no
Click to expand...
Click to collapse
If your phone shows absolutely no sign of life whatsoever, then something may have killed the hardware. You didn't say what you did to cause the hard bricking. Were you flashing a ROM?
Sent from my SAMSUNG-SGH-I897 using XDA App
Happened to me when I first flashed the official OTA update. It stopped mid download and tried to apply the update. Phone was completely dead and had to get it replaced...
Sent from my SAMSUNG-SGH-I897 using XDA App
My phone, (Samsung GT S 5570) Just died a few days ago while I was installing some software. The software was Clockwork Mod. To install this, I used an application from Google Play called -Rom Manager. After installing the app, I clicked something like flash clockwork mod, and a list was brought to me, from which I was to select my phone model, but unfortunately my wasn't among the list. So, I picked the first Model type and proceeded. The clockwork Mod was installed correctly and so I went to the next attempt and that was to Partition my SD Card. Consequently, my phone went off and I thought that it would restart on itself but....! I tried to restart it on my own but the LCD didn't even turn on. What do I do? To make it worse, the phone won't even go into recovery mode. The phone was already rooted, so no warranty. I suppose the phone is Bricked. Someone please help.
My email address, [email protected]
Thanks in advance.
Your phone is bricked and it's because you were trying to install CWM for a device that was probably not even remotely close to yours. Also wrong section I would suggest posting in this section forum.xda-developers.com/forumdisplay.php?f=1311 and seeing if they might be able to help you.
Nixon Kasasi said:
My phone, (Samsung GT S 5570) Just died a few days ago while I was installing some software. The software was Clockwork Mod. To install this, I used an application from Google Play called -Rom Manager. After installing the app, I clicked something like flash clockwork mod, and a list was brought to me, from which I was to select my phone model, but unfortunately my wasn't among the list. So, I picked the first Model type and proceeded. The clockwork Mod was installed correctly and so I went to the next attempt and that was to Partition my SD Card. Consequently, my phone went off and I thought that it would restart on itself but....! I tried to restart it on my own but the LCD didn't even turn on. What do I do? To make it worse, the phone won't even go into recovery mode. The phone was already rooted, so no warranty. I suppose the phone is Bricked. Someone please help.
My email address, [email protected]
Thanks in advance.
Click to expand...
Click to collapse
NEVER install CWM via rom manager it just isn't compatible with our device and 99.99% of people brick their phones because of it. And yes, your phone is probably bricked, hard brick. What u can do now is to try a usb jig method which is available in the guide in my sig.
Sent from my GT-S5570 using xda app-developers app
You're totally out of luck on this one mate, now you have a very nice paper weight if you still have a valid warranty, just bring the brick to the service center and they'll fix it for you, but never ever mention flashing, clockwork mod or anything related it happened while updating with kies, that's it and guide for making usb jig provided by tietganFTW works, I made one for myself already and tested it on mini, so there's nothing to worry about on this one
yackovsky said:
You're totally out of luck on this one mate, now you have a very nice paper weight if you still have a valid warranty, just bring the brick to the service center and they'll fix it for you, but never ever mention flashing, clockwork mod or anything related it happened while updating with kies, that's it and guide for making usb jig provided by tietganFTW works, I made one for myself already and tested it on mini, so there's nothing to worry about on this one
Click to expand...
Click to collapse
So if u have the same situation as him, u can fix it via a usb jig?
Sent from my GT-S5570 using xda app-developers app
tietganFTW said:
So if u have the same situation as him, u can fix it via a usb jig?
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
I heard in few places that mini bricked by cwm is repairable with jig, and I made one and tested it, and it worked, so yeah, probably
yackovsky said:
I heard in few places that mini bricked by cwm is repairable with jig, and I made one and tested it, and it worked, so yeah, probably
Click to expand...
Click to collapse
Aight thanks I have a friend whose phone is bricked. IDK where to find a USB jig though...
tietganFTW said:
Aight thanks I have a friend whose phone is bricked. IDK where to find a USB jig though...
Click to expand...
Click to collapse
Make one yourself dude, you posted a guide about it some time ago, isn't it? btw. link in your sig ain't working
yackovsky said:
Make one yourself dude, you posted a guide about it some time ago, isn't it? btw. link in your sig ain't working
Click to expand...
Click to collapse
I tried, but I failed. And I threw it away. So now I ain't got a spare USB cable to make one. I'll consider getting one during the holidays
tietganFTW said:
I tried, but I failed. And I threw it away. So now I ain't got a spare USB cable to make one. I'll consider getting one during the holidays
Click to expand...
Click to collapse
Yeah, soldering is hell tricky especially with sh!tty tin just keep your arms steady and stay focused
WE should contact Deb's of Tom manager and request them to remove our + others(who affected) devices which don't support and hardbrick:banghead:
XD/\PPP
VR.gtmini said:
WE should contact Deb's of Tom manager and request them to remove our + others(who affected) devices which don't support and hardbrick:banghead:
XD/\PPP
Click to expand...
Click to collapse
+1. This way people won't go around bricking their phone by accident...
Sent from my GT-S5570 using xda app-developers app
Buy usb jig if you are in phil
If you are from Philippines, you can buy usb jig here: triple-w.sulit.com.ph/index.php/view+classifieds/id/7350334/USB+Jig+unbrick+Samsung+Galaxy+S+series+Phones?referralKeywords=usb+jig&event=Search+Ranking,Position,1-2,2
Nick, did you manage to find any way out to unbrick your galaxy mini hard bricked by rom manager?
I have a similar problem now, I need help. If you got any please share with me here or email to: [email protected]
Sent from my GT-S6102 using xda app-developers app
dmokiring said:
Nick, did you manage to find any way out to unbrick your galaxy mini hard bricked by rom manager?
I have a similar problem now, I need help. If you got any please share with me here or email to: [email protected]
Sent from my GT-S6102 using xda app-developers app
Click to expand...
Click to collapse
There is only one way out......... Samsung Service Centre
So here is what I know, an attempt was made to update my G2 by someone other than myself. It now has a black screen and no recovery, it has also been attempted to be repaired by the same person. My pc no longer sees my phone, no download mode or anything else. Is there any hope for this device?
Well, any thoughts from the vast knowledge pooled on here?
godzilla61 said:
Well, any thoughts from the vast knowledge pooled on here?
Click to expand...
Click to collapse
Power on? Anything?
Sent from my Nexus 6 using XDA Free mobile app
31ken31 said:
Power on? Anything?
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Downlad and run SRKtool_2.1_droidth with the correct drives.. All will be well again..
tried the srktool, no drives detected. the qhsusb_bulk driver loads so it does see something......
godzilla61 said:
tried the srktool, no drives detected. the qhsusb_bulk driver loads so it does see something......
Click to expand...
Click to collapse
When you start it pick #4 fixed then #5 unbrick.. You must have had USB Debugging mode Enable prior to bricking.. Also check device manager in windows and check ports.. Will try to help you the best I can, had the same issue 3 days after getting the phone.. If you get it to work after use th Lg program and do fix phone or you will have a lot of issues.
No JOY,
hankbizzo5 said:
When you start it pick #4 fixed then #5 unbrick.. You must have had USB Debugging mode Enable prior to bricking.. Also check device manager in windows and check ports.. Will try to help you the best I can, had the same issue 3 days after getting the phone.. If you get it to work after use th Lg program and do fix phone or you will have a lot of issues.
Click to expand...
Click to collapse
The problem I'm running into is there isn't a bunch of disks shown, only the fixed disks in my comp. So nothing is being seen or they are not there to see.
godzilla61 said:
The problem I'm running into is there isn't a bunch of disks shown, only the fixed disks in my comp. So nothing is being seen or they are not there to see.
Click to expand...
Click to collapse
That is what should happen.. You need the qhsusb QUALCOMM DRIVER..
it is seen as that and on com 7, tried the srktool, no drives detected. the qhsusb_bulk driver loads so it does see something......
Well, I guess it's dead if no one else has any suggestions....... what a shame I really liked this device.
godzilla61 said:
So here is what I know, an attempt was made to update my G2 by someone other than myself. It now has a black screen and no recovery, it has also been attempted to be repaired by the same person. My pc no longer sees my phone, no download mode or anything else. Is there any hope for this device?
Click to expand...
Click to collapse
Does your phone boot? Does it charges?
yes it charges. no it does not boot.
godzilla61 said:
yes it charges. no it does not boot.
Click to expand...
Click to collapse
I have the VS980 (Verizon version) and I was completely...and I mean completely dead (due to my own mistake) , no charge, no power, no download mode, no led, nothing at all. I had a full on 100% brick sitting on my desk. BUT.....I went here, http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 and was able to bring it back to life. Now yes you do have to open the device and mess with inside parts but i was able to get mine going. The guide here is for the other models (specifically not the vs980) but I was able to finagle the inside parts to make it work the way I needed to. From there I was able to boot back up and i flashed all the way back to 10B and just OTA back up to lollipop and root again and install TWRP and I'm back up to where I was a few weeks ago, of course I lost everything (texts,photos) in the process but I am back up and running and I am happy I was able to pull that off thanks to the great folks who figure all this stuff up for us.
So I would say go for it and try it, or if not I could do it for you, and if not I'm am surely positive that someone here can help you figure it out with your current situation. Cheers.
PS, if you dont want to mess with it, just let me have it LOL!
I have the G900AUCU2AND3 and i hard bricked it by not paying attention when a link took me to a note 3 Alliance Rom instead of the GS5 one and i flashed it, when i told safestrap to reboot it just went dead now my dad is upset and wants me to fix it, but it's a black screen it doesn't turn on it doesn't charge as far as i know and it's not recognized when i plug it in some one please help me i've tried for 2 days and still haven't found anything
thanks in advance
Have you tried holding volume down, home and power to get you into download mode?
BROKKANIC said:
Have you tried holding volume down, home and power to get you into download mode?
Click to expand...
Click to collapse
yea 4 different times even taking the battery out before trying and holding it for over half a minute, nothing.
Well, the next thing I would try is pull the battery, plug in the usb to a pc and try the three button hold again.
i did that too, my computer would just tell me it couldn't recognize the usb device.
Logic195 said:
i did that too, my computer would just tell me it couldn't recognize the usb device.
Click to expand...
Click to collapse
Go into device manager and see if the appropriate drivers are installed. If they aren't there, the device will show up with a little triangle on the icon.
AptLogic said:
Go into device manager and see if the appropriate drivers are installed. If they aren't there, the device will show up with a little triangle on the icon.
Click to expand...
Click to collapse
yup they were the first thing i went to install since i was following a guide, in fact it's still in my computer i just checked.
Have you tried reinstalling the Samsung drivers?
Do that first. Uninstall the Samsung drivers. Then reinstall. Plug in phone. Then open Odin and try and flash.
Unless you messed with the boot loaders it should flash. The fact that windows recognizes that something is plugged in means it reads something on the phone. So it's not completely bricked.
it only detects something is there when i pull the battery out and put it back in and then plug it but if i unplug and replug it, it won't read anything anymore but i'll give it a try thanks.
Worst case scenario you've got a hardbrick and will need to JTAG into the device and force the firmware onto it.
AptLogic said:
Worst case scenario you've got a hardbrick and will need to JTAG into the device and force the firmware onto it.
Click to expand...
Click to collapse
well my computer just tells me that it can't recognize the usb device and that it might be damaged, but another problem i have is i can't find the firmware for this phone, It's G900AUCU2AND3 and i can find everything except ND3 i found NCE but can i still flash that? Because i thought it had to be the exact same firmware of the phone for it to work.
Logic195 said:
well my computer just tells me that it can't recognize the usb device and that it might be damaged, but another problem i have is i can't find the firmware for this phone, It's G900AUCU2AND3 and i can find everything except ND3 i found NCE but can i still flash that? Because i thought it had to be the exact same firmware of the phone for it to work.
Click to expand...
Click to collapse
At this point I'd say all you can do is take it to your local Best Buy and ask them to flash NCE on it. If you try to flash NCE on a UCU2 by yourself it'll fail the qfuse check.
AptLogic said:
At this point I'd say all you can do is take it to your local Best Buy and ask them to flash NCE on it. If you try to flash NCE on a UCU2 by yourself it'll fail the qfuse check.
Click to expand...
Click to collapse
hmm i always get mixed responses from best buy but thanks for all the help i really appreciate it i'll see what i can do with best buy.
Check this page: https://forum.xda-developers.com/att-galaxy-s5/help/g900a-g900az-t2965038 read post#15 onward
gello924 said:
Check this page: https://forum.xda-developers.com/att-galaxy-s5/help/g900a-g900az-t2965038 read post#15 onward
Click to expand...
Click to collapse
Thank you guys so much I'll see what my dad wants to do.