Database Develop

[Q]where can I get stock signed firmware for flashing on a S-on sprint m8 non-HK

I'm trying to RUU a sprint htc one m8, I am htcdev unlocked, and currently running sinless rom 3.4.2, and the latest TWRP, now I know I must relock my bootloader in order to RUU and I already tried that.
here is my output when I run fastboot oem lock
Code:
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [INFO] Rebooting device
ERROR: usb_read failed with status e00002ed
FAILED (status read failed (No such file or directory))
finished. total time: 1.251s
but on the bootloader I see the tampered flag and re-locked flag with "security warning below
now here's my "getvar all"
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: **was actually blank**
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: **censored**
(bootloader) imei: **censored**
(bootloader) imei2: Not Support
(bootloader) meid: 99000499040678
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
here is what happened when I tried to flash the full firmware from O.M.J.'s post
Code:
target reported max download size of 1830612992 bytes
sending 'zip' (6598 KB)...
OKAY [ 0.807s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.046s
and here is the output when i try to flash the rom.zip I extracted from htc's newest RUU exe
Code:
./fastboot flash zip rom.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1652270 KB)...
OKAY [ 47.785s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 108.972s
any help is appreciated

What happened when you tried to run the RUU once you relocked your bootloader?

Magnum_Enforcer said:
What happened when you tried to run the RUU once you relocked your bootloader?
Click to expand...
Click to collapse
I did relocked before running the RUU the out put was this
Code:
./fastboot flash zip rom.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1652270 KB)...
OKAY [ 47.785s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 108.972s
I got the "rom.zip" from htc's RUU exe

Managed to RUU through parallels desktop, here's what I did:
I relocked my bootloader (after doing this I got stucked on the bootloader)
I started parallels desktop on my mac and connected my phone in bootloader mode, assigning the device to the virtual machine
I ran the RUU exe (everything went fine)
profit

[Help] Htc One 802W - FAILED (remote: 32 header error)...

Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.14.3509.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.21.1402.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: HTCCN703
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Code:
E:\Android_Debug\ApkTool_2.0.0_Final>fastboot.exe flash zip E:\HTC\802W\PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1402.3_Radio_1237.28.34.0106_release_37
3024_signed_2.zip
target reported max download size of 1542111232 bytes
sending 'zip' (1150783 KB)...
OKAY [ 46.391s]
writing 'zip'...
(bootloader) zip header checking...
FAILED (remote: 32 header error)
finished. total time: 46.619s
Code:
E:\Android_Debug\ApkTool_2.0.0_Final>fastboot.exe flash zip E:\HTC\802W\PN07IMG_M7C_DUG_K443_SENSE60_MR_HTC_Europe_6.13.401.3_Radio_1237.28.35.0516_release_3918
92_signed.zip
target reported max download size of 1542111232 bytes
sending 'zip' (1257895 KB)...
OKAY [ 53.300s]
writing 'zip'...
(bootloader) zip header checking...
FAILED (remote: 32 header error)
finished. total time: 54.137s

Manh_IT said:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.14.3509.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.21.1402.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: HTCCN703
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s
Code:
E:\Android_Debug\ApkTool_2.0.0_Final>fastboot.exe flash zip E:\HTC\802W\PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1402.3_Radio_1237.28.34.0106_release_37
3024_signed_2.zip
target reported max download size of 1542111232 bytes
sending 'zip' (1150783 KB)...
OKAY [ 46.391s]
writing 'zip'...
(bootloader) zip header checking...
FAILED (remote: 32 header error)
finished. total time: 46.619s
Code:
E:\Android_Debug\ApkTool_2.0.0_Final>fastboot.exe flash zip E:\HTC\802W\PN07IMG_M7C_DUG_K443_SENSE60_MR_HTC_Europe_6.13.401.3_Radio_1237.28.35.0516_release_3918
92_signed.zip
target reported max download size of 1542111232 bytes
sending 'zip' (1257895 KB)...
OKAY [ 53.300s]
writing 'zip'...
(bootloader) zip header checking...
FAILED (remote: 32 header error)
finished. total time: 54.137s
Click to expand...
Click to collapse
Remove your imei and serial number from your post above, those are 2 numbers you want to keep to yourself.
your bootloader must be locked or relocked to flash an RUU and also you must be booted into RUU mode to flash it, you may also need to use the htc_fastboot.exe: https://www.androidfilehost.com/?fid=95916177934550031

Seanie280672 said:
Remove your imei and serial number from your post above, those are 2 numbers you want to keep to yourself.
your bootloader must be locked or relocked to flash an RUU and also you must be booted into RUU mode to flash it, you may also need to use the htc_fastboot.exe: https://www.androidfilehost.com/?fid=95916177934550031
Click to expand...
Click to collapse
Thank

Rom by fastboot?

Hi
I have a problem because i did wipe system for some reasons and now my m7 stuck in bootloop (htc logo)
adb doesnt work (pc doesnt see my phone), fastboot works
is there any posiblity to install system without adb only fastboot?
i have s-off and twrp-3.0.0-2-m7
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4321mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

piechu15 said:
Hi
I have a problem because i did wipe system for some reasons and now my m7 stuck in bootloop (htc logo)
adb doesnt work (pc doesnt see my phone), fastboot works
is there any posiblity to install system without adb only fastboot?
i have s-off and twrp-3.0.0-2-m7
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4321mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
adb will only work from a custom recovery or from a booted rom, not in the bootloader. Use twrp to flash a rom or flash a ruu using fastboot.

alray said:
adb will only work from a custom recovery or from a booted rom, not in the bootloader. Use twrp to flash a rom or flash a ruu using fastboot.
Click to expand...
Click to collapse
thanks, but my adb doesnt work for a long time and i cant push any file to memory
otg doesnt work too.
I tired to use fastboot to flash ruu but something is wrong
D:\Android\sdk\platform-tools>fastboot flash zip C:\Users\Karol\Downloads\PN07IM
G_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01
L_release_458803_unsigned.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 167243283 is not a multiple of t
he block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 167243283 is not a multiple of t
he block size 4096
error: write_sparse_skip_chunk: don't care size 167243283 is not a multiple of t
he block size 4096
OKAY [ 66.451s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 230.729s

piechu15 said:
thanks, but my adb doesnt work for a long time and i cant push any file to memory
otg doesnt work too.
I tired to use fastboot to flash ruu but something is wrong
D:\Android\sdk\platform-tools>fastboot flash zip C:\Users\Karol\Downloads\PN07IM
G_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01
L_release_458803_unsigned.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 167243283 is not a multiple of t
he block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 167243283 is not a multiple of t
he block size 4096
error: write_sparse_skip_chunk: don't care size 167243283 is not a multiple of t
he block size 4096
OKAY [ 66.451s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 230.729s
Click to expand...
Click to collapse
If fastboot commands are working but not adb, you have a driver problem. Make sure you have the latest version installed. ADB sideload can sometime be less reliable than using the old adb push method. If you have a recent TWRP version installed, you shouldn't even have to use adb push or adb sideload to transfer the rom to your phone since the recovery is now taking advantage of the MTP protocol (you should see your phone storage, like a usb drive, when the phone is booted in recovery).
Flashing a Lollipop RUU (version starting with 7.xx.xxx.x) requires the use of htc_fastboot.exe. The regular fastboot.exe from the android sdk tools can't handle the 7.xx.xxx.x RUU because of the file size. You can find the correct fastboot version in the ruu collection thread (linked in my signature) at post #1 under the "How to flash" spoiler or search for "htc_fastboot.exe" on androidfilehost.com

alray said:
If fastboot commands are working but not adb, you have a driver problem. Make sure you have the latest version installed. ADB sideload can sometime be less reliable than using the old adb push method. If you have a recent TWRP version installed, you shouldn't even have to use adb push or adb sideload to transfer the rom to your phone since the recovery is now taking advantage of the MTP protocol (you should see your phone storage, like a usb drive, when the phone is booted in recovery).
Click to expand...
Click to collapse
Yes I think the same, it is driver problem. But in my opinion it is problem with the phone drivers.
I tired to connect my m7 to 4 diffrent pc with cables which works good with diffrent phones.
I changed usb port to the new too but still the same, any pc doesnt see my htc.
alray said:
Flashing a Lollipop RUU (version starting with 7.xx.xxx.x) requires the use of htc_fastboot.exe. The regular fastboot.exe from the android sdk tools can't handle the 7.xx.xxx.x RUU because of the file size. You can find the correct fastboot version in the ruu collection thread (linked in my signature) at post #1 under the "How to flash" spoiler or search for "htc_fastboot.exe" on androidfilehost.com
Click to expand...
Click to collapse
which wersion of RUU i should install?
i thought that 7.19.401.2 should work but it isnt.
D:\Android\sdk\platform-tools>fastboot2 flash zip RUU.zip
sending 'zip'... (43286 KB) OKAY
sending time = 3.121 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAIL99 unknown fail
FAILED (remote: 99 unknown fail)
Execution time is 10(s)
== edit
Ok, i managed to flash the ruu
I had to relock bootloader previously.
Thanks for the help @alray

Htc one (m7) can not boot anymore

Hello,
as you already mentioned from the title, my old Phone isnt able to boot anymore.
It all started with that I did a factory reset in my phone settings. I had a custom rom installed (ViperOne...)
after that my phone was able to start and I selected all the settings that u get asked at the start of every new reset.
But my phone wasnt able to complete it all. After I finished it up the process always stoped working.
So I decided to get into the bootloader and clean up everything in there. Now im stuck at the HTC Logo.
Information about my Device: Bootloader is unlocked (now it says "Relocked");
Fastboot should be activated; S-ON;
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35TW900451
(bootloader) imei: 354436059098929
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4052mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I dont have a backup file for my phone, but I put the latest ViperOne+ update on my phone (I can install it via recovery but it isnt working either)
If I type in "fastboot oem rebootRUU" in the ADB & Fastboot cmd it brings me up to another logo (working perfectly)
but when I wanna flash the firmware on it. It doesnt work at all.
fastboot flash zip firmware.zip
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 162706427 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 162706427 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 162706427 is not a multiple of the block size 4096
OKAY [ 54.330s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 218.103s
here it just says signature verify fail...
I even downloaded another firmware and it was the same problem.
Hopefully I didnt miss any Information about my Phone.
It would be really great if you guys can help me. I wouldnt do this post If I havent tried so much
btw. sry for my bad english hehe

If you want to flash a custom rom you must unlock bootloader and flash twrp.
custom roms can be flashed only from twrp.
If you want to revert to stock, this is the right ruu for your m7: https://androidfilehost.com/?fid=962021903579482012

okay thank you very much, this was more than helpful!
yes I want to install a custom rom. I was able to install twrp. But I dont know how to proceed now.
Should I install the custom rom with the cmd or just going into bootloader and select it on my phone to install ?
//edit: just went into the factory restore settings in the bootloader and twrp showed up - trying to install my custom rom now with it.
My phone is now showing up on my pc hehe
//edit²: Android is upgrading - guess its working
Thank you very much

Flash htc one m7

Hello , my phone is stuck in boot loop i want to flash it but i tried several roms (like 10) but always i got this :
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 505152834 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1048572 KB)...
error: write_sparse_skip_chunk: don't care size 505152834 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 505152834 is not a multiple of the block size 4096
OKAY [ 45.729s]
writing 'zip' 1/2...
(bootloader) zip header checking...
FAILED (remote: 32 header error)
finished. total time: 45.905s
Fro info that's my ohone informations (i don't know if the cid is correct it was 11111111 and i changed it several times util it matched with this one)
:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35MW908227
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.069s
Please help me im trying everything sins 2 weeks now, thanks fo trying to help and have a nice day/night !
PLEASE I NEED AN .EXE RUU , THANKS !

Remove the IMEI from your post another time.

MIMOMODE said:
Hello , my phone is stuck in boot loop i want to flash it but i tried several roms (like 10) but always i got this :
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 505152834 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1048572 KB)...
error: write_sparse_skip_chunk: don't care size 505152834 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 505152834 is not a multiple of the block size 4096
OKAY [ 45.729s]
writing 'zip' 1/2...
(bootloader) zip header checking...
FAILED (remote: 32 header error)
finished. total time: 45.905s
Fro info that's my ohone informations (i don't know if the cid is correct it was 11111111 and i changed it several times util it matched with this one)
:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35MW908227
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP203
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.069s
Please help me im trying everything sins 2 weeks now, thanks fo trying to help and have a nice day/night !
PLEASE I NEED AN .EXE RUU , THANKS !
Click to expand...
Click to collapse
The problem is that you're trying to flash a lollipop ruu (7.xx.xxx.x version) using the regular fastboot.exe. You must use htc_fastboot.exe to flash lollipop ruu on the M7 (and for everything on newer htc's devices)
You can download it from here or it can be extracted from a ruu.exe (but not from a ruu.zip). Save htc_fastboot.exe in the same folder where you already have your regular fastboot and adb (htc_fastboot.exe needs the same dll to work). When you need htc_fastboot, simply start your command with "htc_fastboot" instead of "fastboot"
i.e
Code:
fastboot oem rebootRUU
htc_fastboot flash zip some_ruu.zip
fastboot reboot
Note that you don't have to do the "flash zip" command twice now that your are using this fastboot version.
---------- Post added at 03:49 PM ---------- Previous post was at 03:46 PM ----------
oh and your cid was fine when it was 11111111, you should write this one back.