Related
This topic is for development of the Wifi apk for the vibrant. Please DO NOT discuss what wifi means to you or how excited you are about it. I am posting this in hopes that a developer can make this work.
Only comment here if you can contribute and make this work. (what i have provided is the extent of my knowledge)
The apk installs, loads, but will not connect. It gets stuck on 'enabling' and shreads the battery trying.
Perhaps the servers are just not up yet since this is so new..
UPDATE: According to TMo News, T-mobile has stated that they do not support wifi calling yet... so hopefully this app not working is just a result of no server support yet..
MS-HTCVISION-KNT20-02.apk
motorjonny said:
This topic is for development of the Wifi apk for the vibrant. Please DO NOT discuss what wifi means to you or how excited you are about it. I am posting this in hopes that a developer can make this work.
Only comment here if you can contribute and make this work. (what i have provided is the extent of my knowledge)
The apk installs, loads, but will not connect. It gets stuck on 'enabling' and shreads the battery trying.
Perhaps the servers are just not up yet since this is so new..
MS-HTCVISION-KNT20-02.apk
Click to expand...
Click to collapse
Took a look at it and so far its either missing a VPN module or its pointing at settings that we dont have. Right now its looping trying to connect to localhost.
This does ADB install fine, but it doesnt connect if you disable it and try to re-enable it.
Side effect, it was constantly looping trying to connect the service and wasnt very happy about uninstalling when I tried, wouldnt recommend anyone install it unless they have the settings or an idea where we can grab them from
Soon as I get the OTA ill scour for the settings. Soon as I have any updates to it ill tweet/post
Thanks Viral, scepterr says it needs a kernel module and we need source code for that
Why ADB...just hit install...running it on Froyo, I cant tell if its working or not because Tmobile DID fix my signal at my house LOL
laristech said:
Why ADB...just hit install...running it on Froyo, I cant tell if its working or not because Tmobile DID fix my signal at my house LOL
Click to expand...
Click to collapse
You can still make calls and it will say its working but if you turn it off and back on, itll eternally sit at attempting to make connection.
motorjonny said:
Thanks Viral, scepterr says it needs a kernel module and we need source code for that
Click to expand...
Click to collapse
HTC is better about source code, maybe well get lucky and have that released quick and can patch that in *pokes JAC just in case*
It's using all of my CPU.
Interesting that it works after being pushed initially. Is there a way to freeze it in that state, without restarting it?
tengtengvn said:
It's using all of my CPU.
Click to expand...
Click to collapse
Pardon the off-topicness, but which app are you using in that SS?
lotherius said:
Pardon the off-topicness, but which app are you using in that SS?
Click to expand...
Click to collapse
The app he is using is called SystemPanel. It's very useful.
I suggest removing this app in the mean time. Its a CPU hog and 50% of my battery use.
--
Sent from my Vibrant via XDA app
According to TMO News, the wifi calling is not supported yet as stated by T-Mobile.
“Wi-Fi Calling and tethering Wi-Fi sharing are not currently supported on the T-Mobile G2. T-Mobile knows these features are important to consumers and we’re working to deliver them to G2 users in the future. We have nothing further to announce at this time.”
http://tinyurl.com/3yltw9a
This was one of my theories... that would be an easy and good answer for why it will not connect yet...
Looks like theres no luck on the g2 end either, its still missing some configuration or something.
http://forum.xda-developers.com/showthread.php?t=807116
http://forum.xda-developers.com/showthread.php?t=799004
Adding to think tank section of the bible for easy retrieval just in case the thread slows.
Something tells me TMo is going to wait, either for the release of the MyTouch HD or they'll release it on a bunch of phones all at once as a way to boost sales before Christmas.
Looks like G2 will have this app soon enough. I can't wait to have it on the vibrant.
http://www.tmonews.com/2010/11/t-mobile-g2-to-get-wi-fi-calling-update-starting-tomorrow/
The reason why this app isn't working is because you need a Wifi calling plan which tmobile is rolling out soon and it requires a data plan of 19.99 or higher which pretty much everyone has because the 200 mb plan has not rolled out yet.
Has anyone gotten the wifi calling G2 OTA update yet? Can you let us know if the wifi calling now works on the G2? Thanks.
Yes and it works awesome!
Pacothebandit said:
Yes and it works awesome!
Click to expand...
Click to collapse
Thanks. So it looks like both now the G2 and myTouch 4G are up and running with wifi calling. They both have in common that they are running 2.2. So am I to assume that the apk app on both of them is the same and that it will also run on the Vibrant once it gets the 2.2 update?
larryvand said:
Thanks. So it looks like both now the G2 and myTouch 4G are up and running with wifi calling. They both have in common that they are running 2.2. So am I to assume that the apk app on both of them is the same and that it will also run on the Vibrant once it gets the 2.2 update?
Click to expand...
Click to collapse
Or someone with a vibrant that has 2.2 could test it
I've tried a lot of combinations possible and can't seem to get the 850mhz band enabled on my i9000M. Anybody else able to get good reception with miui/cm7 and an i9000m in canada?
risqu3 said:
I've tried a lot of combinations possible and can't seem to get the 850mhz band enabled on my i9000M. Anybody else able to get good reception with miui/cm7 and an i9000m in canada?
Click to expand...
Click to collapse
Just flash the CM7 KC1 modem from the CM7 sourceforge repository.
Furry Atom said:
Just flash the CM7 KC1 modem from the CM7 sourceforge repository.
Click to expand...
Click to collapse
There are no Bell modems in the SF repository. I've attached KC1.
yay that worked! thanks guys!
shadoslayer said:
There are no Bell modems in the SF repository. I've attached KC1.
Click to expand...
Click to collapse
Just wondering, how is KC1 vs. JL2? Better GPS/Battery life?
shadoslayer said:
There are no Bell modems in the SF repository. I've attached KC1.
Click to expand...
Click to collapse
All the Canadian ones are in the Captivate directory. They're still in the SF repository. Why would anyone look in the i9000 section to find 850mhz capable basebands?
I ran JL2 for months, Then KC1 for a while. Now onto 2.3.3 with KC1 modem. Not much difference between JL2 and KC1. Both have amazing battery life. The biggest difference is I find the KC1 modem way better. I dropped calls at my house often with the last few months of JL2 but now I get good reception.
I can't for the life of me figure out how to check if my 850 bands are on or not. Or if the modem is even installed.
Anyone who could guide me in the right direction would be most kind.
For some reason my web browser doesn't connect through 3G, but it does with wifi, any hints?
Also thanks for the modem shadoslayer.
Furry Atom said:
All the Canadian ones are in the Captivate directory. They're still in the SF repository. Why would anyone look in the i9000 section to find 850mhz capable basebands?
Click to expand...
Click to collapse
Because the Captivate != i9000m? I wouldn't think to check under the captivate section for modems for the i9000m, since the captivate is the SGH-i896. Considering it is a different build of CM7 for the captivate and the two aren't compatible, I wouldn't have thought the modems were either.
<shrug>
Dusante said:
I can't for the life of me figure out how to check if my 850 bands are on or not. Or if the modem is even installed.
Anyone who could guide me in the right direction would be most kind.
For some reason my web browser doesn't connect through 3G, but it does with wifi, any hints?
Click to expand...
Click to collapse
On the status bar, do you have "3G" or "H" beside the signal bars? If you have a H, you're using HSDPA, which is good.
As for checking the bands under CM7, I have no idea how either and would really like to know since CM doesn't support samsung unstructured supplementary service data (USSD)...
And np on the modem and thanks for Furry for pointing out the modems are in the captivate section of sourceforge.
hey guys, while on this topic. What do you guys get with speed test? I'm on CM7 and KC1 and just ran it. Got 113ms ping, 1.27Mbps, 3.28Mbps. This is at 4:30pm. Ran it a few times, switching between Toronto and Oakville servers. Slow download
Edit:
Sigh. Just reran and got 6.11Mbps down and 1.59Mbps. Much better.
shadoslayer said:
On the status bar, do you have "3G" or "H" beside the signal bars? If you have a H, you're using HSDPA, which is good.
As for checking the bands under CM7, I have no idea how either and would really like to know since CM doesn't support samsung unstructured supplementary service data (USSD)...
And np on the modem and thanks for Furry for pointing out the modems are in the captivate section of sourceforge.
Click to expand...
Click to collapse
Yeah I have the H, so HSDPA is working, I suspect that's good for rural areas and low signal areas and I'm using most of my bands?
Also found this:
*#*#4636#*#* on phone dial pad, select phone information
It gets a bit of info on the radio methinks, but it hasn't gotten me closer to figuring out why my browsers only connect via wifi.
Dusante said:
Yeah I have the H, so HSDPA is working, I suspect that's good for rural areas and low signal areas and I'm using most of my bands?
Also found this:
*#*#4636#*#* on phone dial pad, select phone information
It gets a bit of info on the radio methinks, but it hasn't gotten me closer to figuring out why my browsers only connect via wifi.
Click to expand...
Click to collapse
I didn't know about that code, thanks. Still doesn't show if the phone is on 1900/850 though. And I'm curious, when/how does the phone decide to switch between the two?
Anyway, I'm guessing there is a problem with the APN. Thats what it sounds like anyway... Check your settings against this: http://support.bell.ca/en-on/Mobili..._Nexus_One_for_the_Bell_Mobility_HSPA_network
shadoslayer said:
I didn't know about that code, thanks. Still doesn't show if the phone is on 1900/850 though. And I'm curious, when/how does the phone decide to switch between the two?
Anyway, I'm guessing there is a problem with the APN. Thats what it sounds like anyway... Check your settings against this: http://support.bell.ca/en-on/Mobili..._Nexus_One_for_the_Bell_Mobility_HSPA_network
Click to expand...
Click to collapse
I restarted my phone and re selected, de selected bell for network operators. Double checked the APN settings (which were correct) Then went into proxy settings under system, and noticed the proxy was off, I turned that on, now everything is working dandy!
Strange I thought I did that before, but perhaps I didn't. Thanks Again!
dial *#0011# to show what band you are using. Dial *#2263# to change band.
Encrypted1024 said:
dial *#0011# to show what band you are using. Dial *#2263# to change band.
Click to expand...
Click to collapse
Those are Samsung USSD codes and will work fine under any Samsung based rom, but they will not work under CM7. Those USSD codes must be in code either not released or not released under GPL for use in CM7.
I've asked a bunch of times and no one ever answered, so I'm assuming there is no way under CM7 to see which band the phone is currently using, which is incredibly frustrating!
shadoslayer said:
I've asked a bunch of times and no one ever answered, so I'm assuming there is no way under CM7 to see which band the phone is currently using, which is incredibly frustrating!
Click to expand...
Click to collapse
I know on my Carrier (Telstra Australia) when it is connected to 850 it is connected to 'Telstra' and when its on 2100 its connected to '3Telstra'. I checked that in settings, above phone, Phone stats I think its called? Do you have something similar?
And I fixed my 3g but going to 2g and back to 3g Before that it was connoecting to 2100mhz :\ Weird..
shadoslayer said:
Those are Samsung USSD codes and will work fine under any Samsung based rom, but they will not work under CM7. Those USSD codes must be in code either not released or not released under GPL for use in CM7.
I've asked a bunch of times and no one ever answered, so I'm assuming there is no way under CM7 to see which band the phone is currently using, which is incredibly frustrating!
Click to expand...
Click to collapse
Should we just keep bumping this thread until we get an answer?
I'm on CM7 with Bell as well and it works great out of the box, without knowing about this 850 band I dont know if I should flash the kc1 modem. Maybe just for kicks?
Altimas said:
Should we just keep bumping this thread until we get an answer?
I'm on CM7 with Bell as well and it works great out of the box, without knowing about this 850 band I dont know if I should flash the kc1 modem. Maybe just for kicks?
Click to expand...
Click to collapse
You have gotten the answer a few times...there is no way to check the band in CM7. If you feel you need one, raise it in the Dev forum once they open it back up to feature requests in a few weeks.
I would advise flashing KC1 and seeing how it goes. Keep an eye on your battery life, and how often the notification bar flips from 3G to H, and run Speedtests a few times a day. After a few days, decide if it is working better for you or not..if not, flash something else.
Modems are like fake IDs...if one doesn't work, flash another one.
rschenck said:
You have gotten the answer a few times...there is no way to check the band in CM7. If you feel you need one, raise it in the Dev forum once they open it back up to feature requests in a few weeks.
Click to expand...
Click to collapse
Actually, I haven't got the answer a few times, and if I have, and missed it, please link to the actual threads, because a search reveals nothing.
You are the first person to come out and actually say "no, it's impossible".
Hi everyone, I flashed different ROMs for a couple of weeks, and finally decide to settle down with OC 2.3.3, the July 15th latest one. However, the same problem occurred, which is with a Tmo Modem in the tab, I have great signal, EDGE data, and no phone function. With JK3, I got nothing, which is the main reason I switched back to Froyo at first.
I am a ATT user, holding a Tmo GT. I didn't find any fimilar threads, and in fact, I think this is a question needs precise answers.
Thanks in advance!
Updated on #4
UPDATE: I find the signal sometimes appeared and give me GPRS... So weird... I even reflash the rom again, not help. So any other paople could help me?
Sent from my GT-P1000 using XDA App
You can use the t-mobile modem, and you will only get EDGE. You can use a vibrant modem and you can get voice and EDGE.
BUT YOU WILL NEVER GET 3G.
There are probably a five hundred posts on this.
And it will never matter which rom you use. It is only due to hardware limitations, as I explained to you elsewhere.
Thanks for the help, but you misunderstood. I know the edge and voice stuff, just the modem didnt work on my tab.
Since I absolutely want gingerbread this time, I finally figure this out, I went to wireless settings and select GSM only, instead of autoselect. NOW I can FINALLY make calls and get edge instead of gprs. I will keep tracked to see if this method could solve the problem eventually.
People see alot of similar threads and they forgot to care about simple problems because they thought it was old, which in fact isnt. Still thank this forum for bringing me all the great things!
Sent from my GT-P1000 using XDA App
michaelgening said:
People see alot of similar threads and they forgot to care about simple problems because they thought it was old, which in fact isnt. Still thank this forum for bringing me all the great things!
Click to expand...
Click to collapse
It is usually the simple things that cause us problems! And you wouldn't have gotten any reply if I didn't care about your problem.
Why can't you switch to a t-mobile sim card so you can enjoy the 3g?
Do u mean if I switch to tmobile I could get 3g and voice? I am managing a family plan right now and my wife is waiting for iphone 5, but if that is the situation, I might consider switching... ao attractive...
Sent from my GT-P1000 using XDA App
From my understanding TMO only provide 3G data plan for tab. No voice plan. Am i right rangercaptain? You did explain to me last time in other treat that only certain region receive the voice plan. Ex spain, israel etc. Or maybe my understanding is wrong? Haha,,just want some confirmation also on this matter. Im interested to know
Sent from my GT-P1000 using XDA App
naimmkassim said:
From my understanding TMO only provide 3G data plan for tab. No voice plan. Am i right rangercaptain? You did explain to me last time in other treat that only certain region receive the voice plan. Ex spain, israel etc. Or maybe my understanding is wrong? Haha,,just want some confirmation also on this matter. Im interested to know
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
You are 100% right.
T-mobile tabs in the USA get voice or 3g using the switch.
In a few other countries t-mobile tabs get voice and 3g, no switch needed.
michaelgening said:
Do u mean if I switch to tmobile I could get 3g and voice?
Click to expand...
Click to collapse
Yes, sort of.
You would have to install the Rotohammer modem switch.
Mode #1 = voice, sms, and EDGE speed data.
Mode#2 = 3g data only.
Thank you for that info rangercaptain. You just add more knowledge to me.
;P
have anyone figure it out yet?
I think you are looking for the gsm radio version for simple mobile.
So that would be the:
http://forum.xda-developers.com/showthread.php?t=1406812
http://forum.xda-developers.com/showthread.php?t=1406812&page=8
..link Motorola Droid 3 > Droid 3 Android Development > Guide - Unlock XT862 for T-mobile/ATT
Just read the thread, use the directions in the 1st post and use V3 of the build.prop (on page 8 post #72)
Good luck :good:
Did it work?
tukchro said:
have anyone figure it out yet?
Click to expand...
Click to collapse
I've got a Simple Mobile SIM, although non-active. After flashing the radio from the XT883 and changing the build.prop it picks up fine. Do keep in mind though; Simple uses the T-Mobile network, which means EDGE only data. Since their 3g is on a non-standard band (1700MHz as I recall) and not supported by the D3. AT&T 3g however works as I've read. I just use Page Plus myself.
So, just been reading this:
http://phandroid.com/2015/05/22/off...android-5-1-1-with-wifi-calling-this-weekend/
Being on EE in the UK, who have just launched WiFi calling, I'm particularly interested in the above article and would love to see it on my device.
However, I'm just wondering what it would take to get it on my device and what the requirements are. Would be so handy.
Could I install the above 5.1.1 T Mobile version and simply change my APN?
Delboyd12 said:
So, just been reading this:
http://phandroid.com/2015/05/22/off...android-5-1-1-with-wifi-calling-this-weekend/
Being on EE in the UK, who have just launched WiFi calling, I'm particularly interested in the above article and would love to see it on my device.
However, I'm just wondering what it would take to get it on my device and what the requirements are. Would be so handy.
Could I install the above 5.1.1 T Mobile version and simply change my APN?
Click to expand...
Click to collapse
Unlikely. I don't think the EE wifi will be the same as T-MO USA, even though EE is 50% T-MO UK.
Already have it. Side loaded it. Signed ota zips are available for download on the internet
System info
bash_array said:
Already have it. Side loaded it. Signed ota zips are available for download on the internet
Click to expand...
Click to collapse
That doesn't really help the OP. He was hoping the t-mobile wifi calling app would help him wifi call on a different provider.
Yes, I'd be interested to know this as well. It would also be nice to know if the new O2 HD Voice ( http://community.o2.co.uk/t5/Welcome-News/HD-Voice-is-rolling-out-on-O2/td-p/879709 ) is working with LYZ28E. Not sure what network @toString is on.
yeah It would be cool if this could be used with sprints wifi calling.. but I doubt that's possible
dabotsonline said:
Yes, I'd be interested to know this as well. It would also be nice to know if the new O2 HD Voice ( http://community.o2.co.uk/t5/Welcome-News/HD-Voice-is-rolling-out-on-O2/td-p/879709 ) is working with LYZ28E. Not sure what network @toString is on.
Click to expand...
Click to collapse
Me? I didn't even post in the thread!