[Q&A] [ROM][UNOFFICIAL][CANCRO] CyanogenMod 12.1 [08/07/15] - Mi 3 Q&A, Help & Troubleshooting

Q&A for [ROM][UNOFFICIAL][CANCRO] CyanogenMod 12.1 [08/07/15]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][CANCRO] CyanogenMod 12.1 [08/07/15]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

"- no sim bug fix". I got no sim bug after xposed install.

Dimkin74 said:
"- no sim bug fix". I got no sim bug after xposed install.
Click to expand...
Click to collapse
Try to reboot it should work
I have never used xposed with Android 5.1.1 so no idea
Sent from my A0001 using Tapatalk

Hi dev. I own a mi3 and I'm currently using the 2nd version of cm-cancro rom by bitti09. I would like to know that can I just flash this rom like updating rom or I need to wipe everything to flash this rom? And can I know the proper steps on how to flash this rom? Cause I spent 5 hours flashing bitti09's rom last time because of the partition thing cause he never posted installation steps lol. Please help me on the flashing guide! Thank you in advance!

stevenren95 said:
Hi dev. I own a mi3 and I'm currently using the 2nd version of cm-cancro rom by bitti09. I would like to know that can I just flash this rom like updating rom or I need to wipe everything to flash this rom? And can I know the proper steps on how to flash this rom? Cause I spent 5 hours flashing bitti09's rom last time because of the partition thing cause he never posted installation steps lol. Please help me on the flashing guide! Thank you in advance!
Click to expand...
Click to collapse
You just need to copy the ROM to your phone and flash it with recovery TWRP recommended
There is no need for re partition this works with either of partition sizes
Sent from my A0001 using Tapatalk

Thanks a lot!
This is the only ROM I found which can work with CDMA2000!
I guess that must be the "RIL issue".
(I also tried SOKP/Mokee/BlissPop/AICP/XenonHD/PA but no one can work with CDMA stably)

Flashed this a few hours ago, the only problem is camera FC. It's not a big deal to me since I'm going to use another camera app anyway.
Everything runs so smooth, thank you for your hard work

flawless rom so far....great work guys...thank u so much....strongly recommended

@kundancool Just wondering, do you have any plan on using Alex's kernel? It has dt2w though.
Anyway, the latest update rocks!

zzvilzz said:
@kundancool Just wondering, do you have any plan on using Alex's kernel? It has dt2w though.
Anyway, the latest update rocks!
Click to expand...
Click to collapse
I might try to import dt2w from that when I get some time
Sent from my A0001 using Tapatalk

Hi, anyone encounter problem with no 5ghz wifi? Only 2.4ghz

killergan said:
Hi, anyone encounter problem with no 5ghz wifi? Only 2.4ghz
Click to expand...
Click to collapse
Setting > Wifi > Advanced > Wifi frequency band > Automatic

Dimkin74 said:
"- no sim bug fix". I got no sim bug after xposed install.
Click to expand...
Click to collapse
Use this workaround: Switch on flight mode before you reboot.

Kundancool I accidentally updated via OTA twice to the official ones - how can I get back to your ROM?

Just flash this ROM on recovery as usual, no need to wipe data or cache, cause both ROMs are the same, only using different kernels and some tweaks by Kundacool

help
Will all roms of mi3 work in mi4???
I m having mi4 and want to flash lollipop rom
Plz help

Yes so far all mi3 roms works with mi4, even original miui roms lol
---------- Post added at 02:09 AM ---------- Previous post was at 02:03 AM ----------
hey guys, is it just me or all of you that are currently using this rom is encountering low volume problem? Because since the first day I started using cyanogenmod 12.1 roms (Bitti's which is already discontinued, its official nightly build and kundacool's rom), the volume is so low. For example, there is 15 bars in volume adjustment and usually 11 is already consider fair loud in a room or in a cafe. But now 11 is not even half of the total volume! The volume is so low that I have to crank it up in ringtone, notification and media to 13-14 and worry that it might hurt the speaker. Please can the rom be tweaked so that the volume is higher before it reaches the max? It would be great to have that kind of volume level back.

stevenren95 said:
Yes so far all mi3 roms works with mi4, even original miui roms lol
---------- Post added at 02:09 AM ---------- Previous post was at 02:03 AM ----------
hey guys, is it just me or all of you that are currently using this rom is encountering low volume problem? Because since the first day I started using cyanogenmod 12.1 roms (Bitti's which is already discontinued, its official nightly build and kundacool's rom), the volume is so low. For example, there is 15 bars in volume adjustment and usually 11 is already consider fair loud in a room or in a cafe. But now 11 is not even half of the total volume! The volume is so low that I have to crank it up in ringtone, notification and media to 13-14 and worry that it might hurt the speaker. Please can the rom be tweaked so that the volume is higher before it reaches the max? It would be great to have that kind of volume level back.
Click to expand...
Click to collapse
Flash Dolby atoms and enable volume leveler .

You mean Dolby Atmos is it? lol
Will give it a try, thanks!

Related

[Q&A] [KERNEL][AOSP 4.4.4|CAF][UNIFIED ghost | moto_msm8960dt][TDHK 10/05/2014]

Q&A for [KERNEL][AOSP 4.4.4|CAF][UNIFIED ghost | moto_msm8960dt][TDHK 10/05/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
So this won't work with vzw xt1060 stock rom unlocked BL?
Nope..its made for aosp Roms based off of CM
Sent from my Nexus 7 using XDA Free mobile app
When install de kernel, aptoide doesn't work anymore... I try to open and then close alone. Sorry for my english. I use de liquid ROM and work fine with default kernel, but i flash this and doesn't work anymore.
AnshRosenberg said:
When install de kernel, aptoide doesn't work anymore... I try to open and then close alone. Sorry for my english. I use de liquid ROM and work fine with default kernel, but i flash this and doesn't work anymore.
Click to expand...
Click to collapse
Did you get this fixed up. If not I'll get you set. A great many people are using the kernel across a lot of ROMS so likely it'll work.
tdhite said:
Did you get this fixed up. If not I'll get you set. A great many people are using the kernel across a lot of ROMS so likely it'll work.
Click to expand...
Click to collapse
I had to install a nandroid of the ROM I was using, to get back to the old kernel . yet still not work for me the Aptoide when you used to and is giving me error in the camera application and stops , so I will try to reinstall everything from 0 and see if it works with the kernel stock and try again with this kernel and see if it stops me working again , if you work then it is not kernel problem , but if i happens again I will have to return to report the error or maybe it's something else that I am installed causing this conflict but I doubt it because I install very basic things ...
AnshRosenberg said:
I had to install a nandroid of the ROM I was using, to get back to the old kernel . yet still not work for me the Aptoide when you used to and is giving me error in the camera application and stops , so I will try to reinstall everything from 0 and see if it works with the kernel stock and try again with this kernel and see if it stops me working again , if you work then it is not kernel problem , but if i happens again I will have to return to report the error or maybe it's something else that I am installed causing this conflict but I doubt it because I install very basic things ...
Click to expand...
Click to collapse
This kernel will only work with ROMS based on AOSP. If Aptoide is a stock rom, or anything other than AOSP, forget the effort. It will not work.
So this kernel is compatible with CM12 nightlies coming out at the moment, or am i wrong?
Cassini-Huygens said:
So this kernel is compatible with CM12 nightlies coming out at the moment, or am i wrong?
Click to expand...
Click to collapse
I'll post a LP version tomorrow. it's working fine. The current is kitkat.
Amazing kernel indeed, only thing missing is RGB color correction, because of purple-ish color on low brightnes settings. Keep on good work!
I'm using Battery by Macropinch to monitor amperage. The latest kernel using the smartmax governor, I'm happy to report, is dipping into the 100mA range quite frequently with wifi and LTE on using the the 1-15-2015 cm12 build. I was getting upset that my cheap Huawei Y536A1 LTE phone was hitting this range on stock and lasting two days on a single charge and my Moto X was staying in the 400-500mA without even touching it, but now I think I think this is a good early indication that we can be seeing good idle and casual use power drain on the moto x. Cheers!
PS: I never post, I didn't mean to post this in the Q&A section. How do I delete it?
is double tap to wake coming?
690sid said:
is double tap to wake coming?
Click to expand...
Click to collapse
Actually, it's in the kernel I last uploaded, just fails to keep the touchscreen alive. Once I fix that, we'll have it. Give me a week -- very busy with work.
tdhite said:
Actually, it's in the kernel I last uploaded, just fails to keep the touchscreen alive. Once I fix that, we'll have it. Give me a week -- very busy with work.
Click to expand...
Click to collapse
okay man... really appreciate your work.
Wanted to ask, is there a way to temporarily deal with the memory leak of lollipop using the kernel?
i have moto x sprint UBL. and now I use cm12 5.02 nightly
does this kernel works for me?
thx
redo777 said:
i have moto x sprint UBL. and now I use cm12 5.02 nightly
does this kernel works for me?
thx
Click to expand...
Click to collapse
I can confirm this kernel works as a sweety on cm12 and on ! For battery wise settings of this kernel I recommend smartmax.
Is this the only android 5 compatible kernel we have , us the ghost ppl .. ?
---------- Post added at 12:01 AM ---------- Previous post was at 12:01 AM ----------
Can we hope to see an update any time soon ?
ban.codrut said:
Can we hope to see an update any time soon ?
Click to expand...
Click to collapse
Posted. Check the dev thread Downloads post.
work on cm12
hi can i flash this kernel in cm12 ?
great
Running on candy5 (ghost) with sweetener, droid maxx xt1080 rooted and unlocked! Everything is running great so far, I'll give you some feedback in a few days! Thanks for all the hard work!
help
I have this Kernel (20/7) on my Ressurection Remix. Who is the best configuration to save battery ? I need to know :
- Best CPU Governor
- Best CPU Voltage
-Best GPU Governor
- Etc
Really Thanks. Any help is great.

[Q&A] [ROM][UB][4.4.4][Z][OTA][.230] Carbon Rom KK Unofficial {built from source}

Q&A for [ROM][UB][4.4.4][Z][OTA][.230] Carbon Rom KK Unofficial {built from source}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UB][4.4.4][Z][OTA][.230] Carbon Rom KK Unofficial {built from source}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Earpiece issue!
Hi @Alx31TLse,
This is strange issue and I have read about the same in threads of some other roms for yuga. Problem with earpiece. Whenever I wanna make a call or receive a call, I wont be able to hear from earpiece. If I connect headset or thru loud speaker I will be able to. This is happening with later to Build 38. I mean for Build 38 its fine. If I flash, build 44 - am facing this.. I dont know whats changing. This is certainly not an issue with ROM or Hardware. I tried CM11 and other stock based ROM as well but same issue. . Not sure whats happening!! As a work around I am using SoundAbout app to route through earpiece for calls and again changing settings to use music in headsets.
Is it possible to check whats causing this? Thank you for such a great rom and thanks in advance..
nag4pl said:
Hi @Alx31TLse,
This is strange issue and I have read about the same in threads of some other roms for yuga. Problem with earpiece. Whenever I wanna make a call or receive a call, I wont be able to hear from earpiece. If I connect headset or thru loud speaker I will be able to. This is happening with later to Build 38. I mean for Build 38 its fine. If I flash, build 44 - am facing this.. I dont know whats changing. This is certainly not an issue with ROM or Hardware. I tried CM11 and other stock based ROM as well but same issue. . Not sure whats happening!! As a work around I am using SoundAbout app to route through earpiece for calls and again changing settings to use music in headsets.
Is it possible to check whats causing this? Thank you for such a great rom and thanks in advance..
Click to expand...
Click to collapse
yeah its a known bug and idk how to solve it sorry abt that.
kernel compatibility
Does it work with lightning kernel?
vipin712 said:
Does it work with lightning kernel?
Click to expand...
Click to collapse
yeah it is working with lightning
Tapatalked with Yuga
Fastboot cant help me
Hi!
I am using Carbon sinse build 18, and now I have no recovery after OTA update to build 45.
Idea to flash another kernel via Fastboot failed in my phone. I have flash some different kernels, Fasboot writed "OK", and after restart I have see old recovery-broken kernel.
Note: I am using Fastboot from Flashtool.
Now I am thinking about Flashtooling some stock-based ROM only to restore recovery but I hate stock and its versions
zobanen said:
Hi!
I am using Carbon sinse build 18, and now I have no recovery after OTA update to build 45.
Idea to flash another kernel via Fastboot failed in my phone. I have flash some different kernels, Fasboot writed "OK", and after restart I have see old recovery-broken kernel.
Note: I am using Fastboot from Flashtool.
Now I am thinking about Flashtooling some stock-based ROM only to restore recovery but I hate stock and its versions
Click to expand...
Click to collapse
If u fastboot flashing kernel, and then u flashing rom...bcuz there's a kernel inside my rom's zip u gonna flash it indeed...once u flashed rom, u fastboot flash another kernel from cm or from previous version wich was working
Tapatalked with Yuga
how can I get OTA
Sent from my Xperia Z using XDA Premium 4 mobile app
gmail update
I am not sure if this should be posted here or not, but i have an issue with the update of gmail on this rom... every time i try to compose a new message, it crashs... so i have to uninstall all the updates for gmail to work correctly agian. any solution?
This may be a stupid question but what file systems does carbon support? ext4, fat, etc

[Q&A] [ROM Collection] neXus ROMs for LBL (KK 4.4.4 based)

Q&A for [ROM Collection] neXus ROMs for LBL (KK 4.4.4 based)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM Collection] neXus ROMs for LBL (KK 4.4.4 based). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BT problem
Hi,
I don't know where to ask this question, searched for answer but didn't find any. I have a problem with all nexus roms, when I'm connected to my Bluetooth hands-free and use a voice dialling, after I disconnect from BT, I can't hear anything on my phone speaker until I restart it. Anyone else had this problem? Currently I'm on Paranoid rom, .205 kernel with pico gapps and I installed google search from the market.
Also Paranoid rom soft reboots often when I'm in Settings->Applications, anything about this?
And Android system consumes most of my battery, about 35% but battery life is about 4-5 hours so it's ok.
Thank you for your answers.
Does not boot for me. (tried to reflash three times already)
pac rom
Afer flashing the last update of pac-rom, i've got a boaloop (clean flash) i was in omnirom.
Failed flashing .207 kernel on my Sony Xperia SP C5302 | Dead Phone?
So I planned to use PAC ROM on my Xperia SP C5302, so i flashed the given kernel from here using CWM (Clock World Mod) and it makes my phone bootloop.
After managed to turn my phone off by holding power button and push the off button on the back of the phone until a vibration occurs, i searched another kernel on the xda forum and downloaded kernel for my c5302 (kernel_5302_205.sin). Then I flashed it with fast boot mode using flash tool.
After the last flash, now I can't do the following:
1. Turn the phone on
2. access CWM (Clock World Mod)
* No display or LED light when charging
When I hold the power on and the off button on the back of the phone, after a while the phone did vibrates but it didn't show any sign of hope besides the vibration even if I've wait for multiple times.
Any help would really be appreciated!!!
Thanks a lot
george.louis said:
So I planned to use PAC ROM on my Xperia SP C5302, so i flashed the given kernel from here using CWM (Clock World Mod) and it makes my phone bootloop.
After managed to turn my phone off by holding power button and push the off button on the back of the phone until a vibration occurs, i searched another kernel on the xda forum and downloaded kernel for my c5302 (kernel_5302_205.sin). Then I flashed it with fast boot mode using flash tool.
After the last flash, now I can't do the following:
1. Turn the phone on
2. access CWM (Clock World Mod)
* No display or LED light when charging
When I hold the power on and the off button on the back of the phone, after a while the phone did vibrates but it didn't show any sign of hope besides the vibration even if I've wait for multiple times.
Any help would really be appreciated!!!
Thanks a lot
Click to expand...
Click to collapse
Can you connect phone in flashmode? If yes then flash the stock rom or any nandroid backup you have made. Hope this helps ?
Sent from my Xperia SP using XDA Premium 4 mobile app
Rupant said:
Can you connect phone in flashmode? If yes then flash the stock rom or any nandroid backup you have made. Hope this helps ?
Sent from my Xperia SP using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your reply.
I had tried to get into fast boot mode and flash mode but failed.
SUDDENLY out of the blue, my phone's LED just blinks. Then I rushed trying to connect my phone to my laptop and green LED is showing. So, I flashed it with a kernel that works and successfully booted up the phone and got into CWM.
Then i proceeded with the next step to install the ROM, which is rebooting recovery. But suddenly my phone died, i think it's out of battery... I'll try it again later. Hopefully it works!
Move to SD Card
After finding out that there will be no official Kitkat for SP, I started looking for Custom ROMS and found PAC Rom. With the latest build, how can I move apps to SD card? I managed to do it on the previous build. I've been only using for only less than a month. Thanks
Hey I made an account to ask a quick question here.
First of all I have to say that I'm very much enjoying the PAC Rom I have been currently using RC-3 version and am very pleased with it. But I just had a quick question on how to disable my browser from opening in well sortoff not full screen? it's the best way to describe it, I searched everything in settings and couldn't find what I'm looking for.
Thanks in advance and kind regards.
You have to include it in the Heads up white list of apps. You will find it in settings>pac settings>heads up.
Sent from my Xperia SP using XDA Free mobile app
---------- Post added at 11:05 PM ---------- Previous post was at 10:58 PM ----------
If you are not using ART, i recomend you to download a xposed module, "ObbToSd". With this you can move the obb of large apps to the sd and let there be more free space
Sorry for my english
Sent from my Xperia SP using XDA Free mobile app
Thank you so much Amotfena you helped!
i found kernel sources for the viskan board
Though i know our phone uses this board i'm not sure whether these are the the xperia L or the SP. Or even if they are any use to anyone. I also know that this is the wrong thread but i am too inexperinced at posting to create a new thread.
I know neXus PRIME is a good developer so I thought this might be the best place to leave the link.
github link:
https://github.com/Kali-/android_kernel_sony_msm8960T
PAC rom poblem
Got a problem with the PAC ROM. Whenever I unlock my phone or after some minutes of usage, the auto brightness comes on. It is very annoying, is there anyway to fix this?
It's for real? I'm waiting for it.. XD
omni i am using since a month ,though it has sm bugs bt trust me i love the smoothness and ram management it has,
i have used other most custom rom , bt this is best.
i want smoothness and ram management+battery thats all, i dont care about ui or features.
pac is good bt lags r there.
will nexus ever care about omni further to remove a lil bugs it has..........??????????
HDMI (bug)
I use PAC Rom and since the RC2 and the sound just disapear when plug it to tv with the mhl cable, the image run well, [email protected] but the ploblem is the sound
sorry for the bad english
Hi all!
I would like to install PA,but i need to know which versions supports custom kernel and UNMERGED storage(at the same time). Someone can help me?
Thanks in advance!
akimester said:
Hi all!
I would like to install PA,but i need to know which versions supports custom kernel and UNMERGED storage(at the same time). Someone can help me?
Thanks in advance!
Click to expand...
Click to collapse
The latest version of the PAC has unmerged storage, I believe that the latest version of PA also be so.
Thanks for this rom! I love it

[Q&A] [ROM][ALPHA][5.0.2] crDroid Lollipop [20150105]

Q&A for [ROM][ALPHA][5.0.2] crDroid Lollipop [20150105]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][ALPHA][5.0.2] crDroid Lollipop [20150105]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can i install xposed on there ?? i think xposed is not supported on lollipop right now....
Stuck with pulsating crDroid 'eye'
Don't get past the boot image.
How can I detect what is wrong ?
Tried several things.
Factory reset, wiped dalvik cache, wipe cache.
The zip file is not corrupt, it flashed without an error, several times, as well as gapps, tried with both recent KK and LP ones.
So far, I have been able to flash CyanogenMod files since version 9 with both CWM and TWRP recovery installed.
I don't see anything suspicious in recovery.log.
Where else shall I look for vital information ?
odyss199 said:
Can i install xposed on there ?? i think xposed is not supported on lollipop right now....
Click to expand...
Click to collapse
You can install anything you want! The only problem is i think Xposed won't work on Lollipop and thank the almighty for that (correct if i'm wrong). Read the first post because we DO NOT PROVIDE ANY HELP IN CASE OF MODS AND SPECIALLY XPOSED.
maruttuku said:
Don't get past the boot image.
How can I detect what is wrong ?
Tried several things.
Factory reset, wiped dalvik cache, wipe cache.
Click to expand...
Click to collapse
Be sure your download isn't corrupted or try with another recovery. It's a isolated issue and the fault is coming from you
good rom
I m trying all android lollipop rom for i9305 this is good but some things doesnt work
we have to wait for solve issues
HI
anyone know the name of the launcher in the photos?
Thank you for this ROM
I install following your instruction and it is work perfect.
But i have some questions?
1-Does this ROM have OTA update?
2-Can i add radio to this ROM?
Big thank you for your work.
Hey guys which recovery should I install for lollipop since I am on cwm 6.0.47
Sent from my GT-I9300 using XDA Premium 4 mobile app
crDroid
Been using this lollipop rom for a few days and its the best one yet, it even has full 833mb ram not 778mb like other roms run on.
---------- Post added at 01:06 PM ---------- Previous post was at 12:58 PM ----------
How to set battery % press menu select crDroid custom then status bar and select battery % in status bar settings.
---------- Post added at 01:14 PM ---------- Previous post was at 01:06 PM ----------
harshshah1291993 said:
Hey guys which recovery should I install for lollipop since I am on cwm 6.0.47
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
TWRP 2.8.3.0 is very good.
my s3 have unknow imei and baseband when i use this rom (it's same when i use nameless lolipop 5.2),but when i back to other rom (not android 5),imei and baseband still there normally
and one issue is my phone vibrate always ,a few seconds it vibrating once.
help me,what wrong with my phone ?????
i have used arter97 kenrnel, error on kernel ?
there are other kernel support android 5 for s3 ?
my s3 have unknow imei and baseband when i use this rom (it's same when i use nameless lolipop 5.2),but when i back to other rom (not android 5),imei and baseband still there normally
and one issue is my phone vibrate always ,a few seconds it vibrating once.
help me,what wrong with my phone ?????
i have used arter97 kenrnel, error on kernel ?
there are other kernel support android 5 for s3 ?
Failed to send SMS
Has anyone else being having issues sending SMS? I'm able to receive them ok but its not letting me send any! Any ideas on how to fix this? Thanks
Anyone know how to restore app data.. From kit kat to lollipop? Some apps I use don't have a backup system
I'm currently using cm12 but I want to use this rom but first some questions... Is there a black theme only? Or where can I get the white theme? Does this rom also have the miscellaneous battery drain issue? I like the white theme more.
Greetings, chirag
.
andreazimba said:
I m trying all android lollipop rom for i9305 this is good but some things doesnt work
we have to wait for solve issues
Click to expand...
Click to collapse
thi's for i9300. No i9305
turn off the vibration
Thank you for this very nice rom, maybe i'm really stupid but i can't find anywhere an option to turn off the vibration on the keyboard and on the capacitive buttons. Can someone help me out?, Please.
have
Hi All!!
I have screen flickering when using Dolphin browser all the time -- like fast refresh of page, but same pages on stock browser, FF or opera mini behaving normally.
Any Ideas?
Thank a lot..
very pretty
this is stable and my battery goals two dayss
Really thanks for this rom. It is fast, smooth, stable and got really well battery usage enabled.
If you are thinking about installing this - go for it! Best of tested roms!
This one is good. Haven't faced any single issue from yesterday. I have tried many different lollipop roms in my device so far, and there was always issues that I couldn't ignore, but this one is more stable than the rest out there, I can assure you about that. However, don't know if it's fully stable or not, that's why gonna hold onto this for a while. Let's see what happens. And a big thanks to Crdroid for this awesome rom! keep up the good work guys.

[Q&A] [ROM][YUGA][LP][5.0.2] CyanogenMod 12.0 Unofficial

Q&A for [ROM][YUGA][LP][5.0.2] CyanogenMod 12.0 Unofficial
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][YUGA][LP][5.0.2] CyanogenMod 12.0 Unofficial. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
How to install CWM /TWRP recovery for xperia z c6602 kitkat 4.4.4 10.5.1.A.0.283
Hii I am newbie... I want to install cwm/TWRP recovery in xperia z c6602 running kitkat 4.4.4 10.5.1.A.0.283.. I want to install this rom [ROM][YUGA][LP][5.0.2] CyanogenMod 12.0 Unofficial.
I have already unlocked bootloader... And I want to install
Cwm/TWRP recovery I got confused which recovery have to install this rom please help me out
please provide me proper guide instructions step by step to install recovery thanks
Kunal_6020 said:
Hii I am newbie... I want to install cwm/TWRP recovery in xperia z c6602 running kitkat 4.4.4 10.5.1.A.0.283.. I want to install this rom [ROM][YUGA][LP][5.0.2] CyanogenMod 12.0 Unofficial.
I have already unlocked bootloader... And I want to install
Cwm/TWRP recovery I got confused which recovery have to install this rom please help me out
please provide me proper guide instructions step by step to install recovery thanks
Click to expand...
Click to collapse
Make sure you have a full backup of your device before doing anything else.
If you head over to the TWRP thread you will find a step by step installation guide to get TWRP installed, plus other important information.
You can flash any lollipop rom you like through TWRP just place the rom and gapps on your sdcard and follow the instructions provided in the roms thread.
ROM Firmware Required: Unlocked bootloader
Click to expand...
Click to collapse
Is there any Lollipop ROM for locked bootloader?
Unfortunately no
Sent from my One Plus One
sorry bro, I'm found little isue my ringtone sound can't change it still tink. . . .tink . . ..
Please help me //
regards.
Sorry for my English
aum1080p said:
sorry bro, I'm found little isue my ringtone sound can't change it still tink. . . .tink . . ..
Please help me //
regards.
Sorry for my English
Click to expand...
Click to collapse
Sorry I don't understand what you mean, are you trying to change your ringtone and it won't change?
If your ringtone resets after a reboot move the file to your internal SD card and set your ringtone again.
Sent from my Xperia Z using Tapatalk
AuSSiELaMbChOpS said:
Sorry I don't understand what you mean, are you trying to change your ringtone and it won't change?
If your ringtone resets after a reboot move the file to your internal SD card and set your ringtone again.
Sent from my Xperia Z using Tapatalk
Click to expand...
Click to collapse
I'm full wipe and reinstall rom, It Great Work Rom.
THANKS SIR
gapps problems
guys i had a bootstall and this is the only room that worked but the gapps refused to be installed via recovery so when i boot my phone i keep receiving google apps errors that won't allow me to do anything ?
dettol123 said:
guys i had a bootstall and this is the only room that worked but the gapps refused to be installed via recovery so when i boot my phone i keep receiving google apps errors that won't allow me to do anything ?
Click to expand...
Click to collapse
What error did you get when flashing gapps? Did you check the md5 to make sure the download was ok?
What recovery are you using TWRP from the rom or something else?
Sent from my Xperia Z using Tapatalk
Camera not working
any way to fix it please ? btw great rom thanks for your efforts
Very low volume
First of all, Thanks a tonne for this ROM! Lightning fast and performance wise it is the best. . But, the both internal and external speaker volume is very low. I know xperia Z has low volume, but volume in this is very very low.. Can't even hear the phone ringing! Any fix for this?
002shank said:
First of all, Thanks a tonne for this ROM! Lightning fast and performance wise it is the best. . But, the both internal and external speaker volume is very low. I know xperia Z has low volume, but volume in this is very very low.. Can't even hear the phone ringing! Any fix for this?
Click to expand...
Click to collapse
This could be caused by the FauxSound Control I added in the last build, I personally use Viper4android which improves both the volume and quality immensely.
I can try reverting the FauxSound Control in the next build to see if that helps.
Sent from my Xperia Z using Tapatalk
---------- Post added at 04:26 PM ---------- Previous post was at 04:23 PM ----------
dettol123 said:
any way to fix it please ? btw great rom thanks for your efforts
Click to expand...
Click to collapse
Possibly but you didn't answer any of the questions I asked, which will help getting the problem resolved.
Did you try downloading a different gapps package? The Banks gapps linked in the first post work perfectly for me and I am assuming everybody else because nobody else has reported this problem.
Sent from my Xperia Z using Tapatalk
Thanks..but...
Thanks for the reply. But can you help me with the viper installation and links? Kinda new here and btw, found another bug, where the music player randomly keeps stopping and needs a restart for it to fix. Thanks in advance!
new problem
after few reboots it gets stuck on the Cyanogenmod logo wen't back for this rom cuz of a bigger problem with 5.1 and now i get this i seem to be very lucky
dettol123 said:
after few reboots it gets stuck on the Cyanogenmod logo wen't back for this rom cuz of a bigger problem with 5.1 and now i get this i seem to be very lucky
Click to expand...
Click to collapse
If you are downgrading from 5.1 and having issues I would recommend a full wipe so format system, factory reset then flash the rom and gapps.
Sent from my Xperia Z using Tapatalk
---------- Post added at 06:44 PM ---------- Previous post was at 06:42 PM ----------
002shank said:
Thanks for the reply. But can you help me with the viper installation and links? Kinda new here and btw, found another bug, where the music player randomly keeps stopping and needs a restart for it to fix. Thanks in advance!
Click to expand...
Click to collapse
Search for the viper4android thread it has all the info there to get it installed.
You could try disabling NuPlayer in Developer Options to see if that helps with music playback, I disable it so viper4android can work correctly, I haven't experienced any issues with music stopping.
Sent from my Xperia Z using Tapatalk
Stock Lollipop is out..
Umm, since the new update is out..wouldn't this mean you can fix the problem where you cant hear the other person when talking on the phone? or has this bug been fixed? Also, since lollipop stock rom is out wouldn't it help developers like you to improve the newer builds and make it more stable?
Also, are the unofficial builds still in testing or can it be used as a daily driver? Please reply ASAP because I have been itching to get lollipop for SOO long and am currently on cm 11 nightlies waiting for a stable cm12 builds to start rolling out..Thanks!
saquib1996isb said:
Umm, since the new update is out..wouldn't this mean you can fix the problem where you cant hear the other person when talking on the phone? or has this bug been fixed? Also, since lollipop stock rom is out wouldn't it help developers like you to improve the newer builds and make it more stable?
Also, are the unofficial builds still in testing or can it be used as a daily driver? Please reply ASAP because I have been itching to get lollipop for SOO long and am currently on cm 11 nightlies waiting for a stable cm12 builds to start rolling out..Thanks!
Click to expand...
Click to collapse
Call bug was fixed ages ago, as far as I am concerned this rom is stable for use as a daily driver.
Once Sony releases Lollipop for the c6603 and the kernel and blobs are available then developers far more capable then myself will begin upgrading our device to take advantage of the new release.
Sent from my Xperia Z using Tapatalk
but..
AuSSiELaMbChOpS said:
Call bug was fixed ages ago, as far as I am concerned this rom is stable for use as a daily driver.
Once Sony releases Lollipop for the c6603 and the kernel and blobs are available then developers far more capable then myself will begin upgrading our device to take advantage of the new release.
Sent from my Xperia Z using Tapatalk
Click to expand...
Click to collapse
If this is stable, then why is this not on the official cyangenmod website? also, which developers will use the new kernel and blobs to improve this ROM?
saquib1996isb said:
If this is stable, then why is this not on the official cyangenmod website? also, which developers will use the new kernel and blobs to improve this ROM?
Click to expand...
Click to collapse
This release is not on the CyanogenMod website because it is an unofficial release as clearly stated in the OP, you asked if the rom was stable for daily driver use which I replied it was.
You can quite easily find details of device maintainers for most roms on their respective websites or by looking for their official thread here on xda.
Sent from my Xperia Z using Tapatalk

Categories

Resources