Related
I have a sprint galaxy tab Model SPH-P100
Because P1000 firmware upgrade with Odin3 v1.7
Firmware does not boot but can into Brush model
Now wants to sprint the original firmware
Brush back to the original firmware
But I can not find the original firmware
Please help me Thank you very much
There is no sprint firmaware.... yet..
Sent from my SPH-D700 using XDA App
thank you top friends
but i Need sph-100 firmware
tx2000 said:
there is no sprint firmaware.... Yet..
Sent from my sph-d700 using xda app
Click to expand...
Click to collapse
read this post
i asked for help in live chat with samsung agent. That's the answer:
" I have checked with the information and I see that, as you have break the firmware, it needs can be fixed at our service center for which you need to send the Tab to United States. "
thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/#entry871
check out the posts here...i am androidgeek...need same help on that forum that i am asking for here
PLEASE EMAIL ME WHEN YOU HAVE THE ODIN FILES FOR THE SPRINT GALAXY TAB! I NEED THEM BECAUSE I HAVE NO RECOVERY MODE!!! MY TAB IS BRICKED ITS A GIANT PAPERWEIGHT!!! NEED A FIX
[email protected]
You are broke. There isn't a Sprint modem available to get you back to stock or functional on the CDMA network.
Best you can do is return it or reflash with an Odin-based firmware from the European packages available. This will get you up and running, but you won't have Sprint data access, only WiFi.
Actually, it's your lucky day.
The reason I was so sure about your problem is that I had the same problem myself.
I ran a 'Rotobackup,' which worked for everything but the modem.bin file. I was able to flash the stock setup back on the Tab, but it would fail when the Odin package I created got to the modem. It would fail and I could no longer boot or get to recovery or the normal downloading screen. It would just show a phone and a PC graphic.
It would, however, show up in Odin. No ADB tho
Anyhoo, I was about to head back to my local Sprint store to do an exchange but decided to try a modem.bin file from the Epic 4G.
Worked in Odin and I'm back up and on the Sprint network.
Now, this modem is NOT made specifically for the Sprint Tab. I JUST did this to my device and have not tested it extensively.
If you are broken, you can try to flash this modem, but ONLY DO IT IF YOU HAVE NO OTHER OPTION.
modem.bin (14.88 MB)
ZoinksS2k said:
You are broke. There isn't a Sprint modem available to get you back to stock or functional on the CDMA network.
Best you can do is return it or reflash with an Odin-based firmware from the European packages available. This will get you up and running, but you won't have Sprint data access, only WiFi.
Click to expand...
Click to collapse
forum.androidcentral.com/galaxy-tab/44323-us-galaxy-tab-sprint-system-dump.htmls
sprint ROM dump...i have it as a TAR file and all i need now is a PIT file for odin
SPHM900 said:
forum.androidcentral.com/galaxy-tab/44323-us-galaxy-tab-sprint-system-dump.htmls
sprint ROM dump...i have it as a TAR file and all i need now is a PIT file for odin
Click to expand...
Click to collapse
How would we flash this to restore a Sprint Tab?
I think this thread belongs in General QA, but...
I don't think that has the modem, which is why you can't boot.
This look familiar?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yikes. its bricked until you can flash it with some firmware. its not available yet... and there's nothing you can do in the meantime.
There is a way. I am back up after I took that picture.
I have a Rotobackup package that works, but only with the Epic 4G modem.
I ran the DD commands with all my apps and settings, so I don't want to upload the package just yet (you can't have my emails ). It is also a bad idea to release a package with a untested modem.
We will have a flashable Sprint image if somebody can figure out how to properly export the stock modem.bin file.
wait i dont understand... explain more
my tab is bricked too.. i deleted the stock tw launcher and wiped.. so now i dont have a launcher when it boots up and theres no way to turn on usb debugging. i need that flashable .tar
Read up here
http://forum.xda-developers.com/showthread.php?t=850359&page=4
You should be able to side-load a new launcher from recovery. Search for a LauncherPro APK and install it via ADB.
I'm making a clean Odin package now if you guys want to try it. It is huge, so it will take a while to upload.
ZoinksS2k said:
You should be able to side-load a new launcher from recovery. Search for a LauncherPro APK and install it via ADB.
I'm making a clean Odin package now if you guys want to try it. It is huge, so it will take a while to upload.
Click to expand...
Click to collapse
For a sprint tab?
Indeed. Sprint Galaxy Tab restore via Odin.
ZoinksS2k said:
You should be able to side-load a new launcher from recovery. Search for a LauncherPro APK and install it via ADB.
I'm making a clean Odin package now if you guys want to try it. It is huge, so it will take a while to upload.
Click to expand...
Click to collapse
I cant use ADB because usb debugging is not enabled and i cant get into settings. I have the stock recovery installed and dont have the update.zip keys to use it. So yeah I'm screwed until I can odin restore :/
Like I said on the other posts, the modem on the epic and galaxy tab are identical, so it should work! Can't wait for this, thank you.
Give her a go
http://forum.xda-developers.com/showthread.php?p=9753941#post9753941
Hey guys,
I bought a Nexus one few weeks ago.
When I switch on it and connected to my wifi, it automatically updated to Gingerbread 2.3.3
But still i cant update it to 2.3.4
I went to settings>about phone> system updates but update is not available.
I tried manually updating using the zip file downloaded from google, but it says file verification error.
I also tried forced checking using *#*#checkin#*#* but no luck
As I heard 2.3.4 update was released on May.
So How can I update to 2.3.4?
Phone's Android build number is 3.02.1010.4 CL492.8
ashenr said:
Hey guys,
I bought a Nexus one few weeks ago.
When I switch on it and connected to my wifi, it automatically updated to Gingerbread 2.3.3
But still i cant update it to 2.3.4
I went to settings>about phone> system updates but update is not available.
I tried manually updating using the zip file downloaded from google, but it says file verification error.
I also tried forced checking using *#*#checkin#*#* but no luck
As I heard 2.3.4 update was released on May.
So How can I update to 2.3.4?
Phone's Android build number is 3.02.1010.4 CL492.8
Click to expand...
Click to collapse
CAn manually download it from the WiKi page....http://www.mediafire.com/n1passion
ctfrommn said:
CAn manually download it from the WiKi page....
Click to expand...
Click to collapse
Thank you for the reply.
How can I find the relevant update for my phone?
Please help since I'm new to this.
ashenr said:
[snip]
Phone's Android build number is 3.02.1010.4 CL492.8
Click to expand...
Click to collapse
That is not a stock Android build number. Is it a Vodafone or Videotron device? If so, you will not be able to get (OTA or manual install) the latest version until your carrier releases it. If you want the latest releases, you need to flash a stock ROM...
Did you root it and change any system files? If so, then you will not get future OTA updates. The file verification error sounds like you did change or delete some system files. If you did the update will fail. To install an OTA update (even from sd card) the phone must be stock with no changes to any files that came with the stock rom.
jboxer said:
Did you root it and change any system files? If so, then you will not get future OTA updates. The file verification error sounds like you did change or delete some system files. If you did the update will fail. To install an OTA update (even from sd card) the phone must be stock with no changes to any files that came with the stock rom.
Click to expand...
Click to collapse
Rooting has NO impact on being able to receive or install OTA updates...
efrant said:
That is not a stock Android build number. Is it a Vodafone or Videotron device? If so, you will not be able to get (OTA or manual install) the latest version until your carrier releases it. If you want the latest releases, you need to flash a stock ROM...
Click to expand...
Click to collapse
No It's not from Vodafone or other carrier. I bought it from Korea through ebay. It says it's an unlocked phone.
Here is a screenshot of the "About phone" screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jboxer said:
Did you root it and change any system files? If so, then you will not get future OTA updates. The file verification error sounds like you did change or delete some system files. If you did the update will fail. To install an OTA update (even from sd card) the phone must be stock with no changes to any files that came with the stock rom.
Click to expand...
Click to collapse
No I didnt root it or didnt change any system file.
ashenr said:
No It's not from Vodafone or other carrier. I bought it from Korea through ebay. It says it's an unlocked phone.
Here is a screenshot of the "About phone" screen.
[snip]
Click to expand...
Click to collapse
That is not a stock Android ROM. It looks like there is some sort of Sense ROM running on it.
A stock build should look something like the attachment.
efrant said:
That is not a stock Android ROM. It looks like there is some sort of Sense ROM running on it.
A stock build should look something like the attachment.
Click to expand...
Click to collapse
Thanks for the reply.
Phone doesnt have any sence UI. But as you said it may have a carrier specific ROM.
So is that mean I need to flash a new stock ROM?
ashenr said:
Thanks for the reply.
Phone doesnt have any sence UI. But as you said it may have a carrier specific ROM.
So is that mean I need to flash a new stock ROM?
Click to expand...
Click to collapse
If you want to get stock 2.3.4 then, yes, you need to flash a stock ROM. You will lose all your data, so make sure you back up as much as you can. The easiest way to flash a completely stock ROM is to download the zip file from this post, rename it to PASSIMG.zip, and place it in the root of your sdcard. Then boot into the bootloader, and it will recognize the file. After verifying it, it will ask if you want to flash it. Or you could unlock your bootloader, and flash all the images in the zip file using fastboot on your computer.
efrant said:
If you want to get stock 2.3.4 then, yes, you need to flash a stock ROM. You will lose all your data, so make sure you back up as much as you can. The easiest way to flash a completely stock ROM is to download the zip file from this post, rename it to PASSIMG.zip, and place it in the root of your sdcard. Then boot into the bootloader, and it will recognize the file. After verifying it, it will ask if you want to flash it. Or you could unlock your bootloader, and flash all the images in the zip file using fastboot on your computer.
Click to expand...
Click to collapse
I'll try the first method you said.
Thanks a lot for your help!
Finally I did it guys!
First I downloaded FRG83 and tried flashing but it didnt work.
It said "CID incorrect"
Then I tried flashing with FRG33 it also didnt work.
Then I tried downloading images form HTC. Didnt work either
Then I found out that issue is with the memory card.
I turned my other memory card into a gold card and tried flashing with FRG83.
Voila! I worked!
Then I updated to 2.3.4
Thank you very much for the help guys!!
ashenr said:
Finally I did it guys!
First I downloaded FRG83 and tried flashing but it didnt work.
It said "CID incorrect"
Then I tried flashing with FRG33 it also didnt work.
Then I tried downloading images form HTC. Didnt work either
Then I found out that issue is with the memory card.
I turned my other memory card into a gold card and tried flashing with FRG83.
Voila! I worked!
Then I updated to 2.3.4
Thank you very much for the help guys!!
Click to expand...
Click to collapse
Since you didn't use the link I posted for you, you are not upgraded to the latest radio that came with the latest Gingerbread ROM. (Compare your baseband version with mine.) You can flash it manually if you want (assuming you either have root or an unlocked bootloader).
efrant said:
Since you didn't use the link I posted for you, you are not upgraded to the latest radio that came with the latest Gingerbread ROM. (Compare your baseband version with mine.) You can flash it manually if you want (assuming you either have root or an unlocked bootloader).
Click to expand...
Click to collapse
I was not sure whether it is compatible with my phone because it's has a SLCD.
Later I found that the ROM you gave me, is a newer one.
I havent rooted the phone yet.
I feel lack of wifi signal after flashing. Now I think it's because of this baseband version.[not sure]
Actually I haven't noticed the baseband version until you tell it.
Is there any other significant different that you feel between these two baseband versions?
Still I havent planned to root because it'll void the warranty.
Then I'll flash again with the ROM you gave.
ashenr said:
I was not sure whether it is compatible with my phone because it's has a SLCD.
Later I found that the ROM you gave me, is a newer one.
I havent rooted the phone yet.
I feel lack of wifi signal after flashing. Now I think it's because of this baseband version.[not sure]
Actually I haven't noticed the baseband version until you tell it.
Is there any other significant different that you feel between these two baseband versions?
Still I havent planned to root because it'll void the warranty.
Then I'll flash again with the ROM you gave.
Click to expand...
Click to collapse
Rooting your device does not void the warranty, as it is easily undoable, with no trace. (Note, however, that you cannot root 2.3.4 with a locked bootloader, so you will need to downgrade to an older version, root, then update using OTA, but being careful not to lose root. There are many guides on how to do this.)
Unlocking the bootloader technically does void the warranty, however, it has been reported numerous times in these forums that HTC still honours the warranty even if the bootloader is unlocked.
The difference in the radio affects each user differently, as there are too many variable to compare.
Hi there!
My device says that there's no service and battery icon shows a question point:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does it mean that my battery is gone? And what about service?
I've installed CM7 Nightly #203 and vorkKernel (flags: camera, ril725, silent, ext4, ring), i don't think it's this the problem though.
I've bought this device just 6 days ago, what shall i do?
I trust in your help.
Update 08 Jan 2012: if you have the same problem, try to restore your previous RIL before flashing with nvflash.
The problem is the RIL...happened to me when testing RILs for 824BB.
i bet that is a baseband issue... have you changed your baseband trough the smartflash software?
go to settings -> about phone and check the baseband version, if it says unknown it's the same problem i had 1 week ago
the only solution is to flash trough nvflash the stock rom that include any official baseband like the last 725 for me (italy)
after you flash the stock rom+baseband don't restore any backup, it will brick your baseband again
Thanks both.
Well, i've changed RIL through Get RIL app.
In fact, baseband version is unknow!
Do I really have to flash stock rom in order to fix it?
pidocchio said:
i bet that is a baseband issue... have you changed your baseband trough the smartflash software?
go to settings -> about phone and check the baseband version, if it says unknown it's the same problem i had 1 week ago
the only solution is to flash trough nvflash the stock rom that include any official baseband like the last 725 for me (italy)
after you flash the stock rom+baseband don't restore any backup, it will brick your baseband again
Click to expand...
Click to collapse
Nope, restore don't touch baseband, as it can't access to hidden partitions where BB is flashed by Smartflash or Nvflash.
Personnally I would check Baseband version in Settings> About Phone. If it's unkown, you can just flash the desired Baseband with Smartflash. Or flash an entire stock ROM with Smartflash, but it will unroot your device, so you'll have to root it again.
If Baseband is correclty identified, grab only the RIL and fllash it with CWM.
See Temasek shared files here:
http://www.mediafire.com/temasek
It contains all basebands in smartflash format, and RILs in .zip format
Striatum_bdr said:
If Baseband is correclty identified, grab only the RIL and fllash it with CWM.
See Temasek shared files here:
http://www.mediafire.com/temasek
It contains all basebands in smartflash format, and RILs in .zip format
Click to expand...
Click to collapse
How do i use smartflash correctly?
I've tried but nothing changed, it seems it only wiped data.
If you followed this:
http://android.modaco.com/topic/335...aseband-release-103521-20110725-v20l-version/
Then it should be fine. If wipes /system and /data, so you have to restore via CWM your backup.
Try to install another ROM like Thanatos for example to check if it's not ROM related, or kernel related by flashing a fresh CM7 without changing kernel. CM7 is already ext4 so you don't need vorkkernel for that, adn it's better to use I think GetRIL to match RIL and BB.
I've flashed only the baseband, but it always says "unkown".
Maybe i have to flash the entire stock rom.
Yes perhaps, Nvflash stock entire ROM, to check that hardware is good... It's another possibility...
Ok, i've flashed stock rom with nvflash.
Everything is working now .
Ok, then you can root it, and flash one thing at time , with nandroid backup between each step.
Striatum_bdr said:
Nope, restore don't touch baseband, as it can't access to hidden partitions where BB is flashed by Smartflash or Nvflash.
Click to expand...
Click to collapse
i wrote that because it's the thing happened to me last week...
this was my issue:
changed baseband from 405 to 725 trough smartflash
first reboot after baseband switch worked fine with the previous RIL 405
applyed the correct RIL725 with GetRIL
backed up
rebooted
phone with "unknown baseband" and obviously no service at all, only WiFi working
tried several times flashing other basebands and roms without sorting out the problem
flashed stock v10c with nvflash
phone working normally
rooted + cwm
restored the previously backup
phone with "unknown baseband" and obviously no service at all, only WiFi working
flashed stock v10c with nvflash
phone working normally
rooted + cwm
installed cyanogen #203 and working normally
installed RIL725 from GetRIL
rebooted
phone with "unknown baseband" and obviously no service at all, only WiFi working
flashed stock v10c with nvflash
phone working normally
rooted
installed cyanogen #203 and working normally
restored various apps from titanium backup
now i'm sticking with 725 baseband and CM stock RIL218 to prevent another "unknown baseband" issue
So it's more a CM7 bug that can't deal with BB. Don't remember that CM7 comes with 0218 BB, and there's no official recommendation to change it, aramcee was very clear on that .. despite this many users flash alternative BB and it works, so hard to say..
Golden rule: if already installedBB works no need to change except if asked by ROM packager.
Well, i've just installed RIL 725 on cm7 by switching to vorkKernel.
It works. However i remember that before, when i got the "unkown" baseband, i installed another RIL through GetRIL. And this did the mess up!
Now it works like a charm
Oh yes I think I've heard such stories of messing RIL.. Great for you!
here are my phone details
Model Name Samsung Galaxy Tab GT-P1000, firmware version-2.3.3,
Baseband version-P1000DDJP4
kernel version-2.6.35.7 [email protected] #4
Build Name: GINGERBREAD.DDJPA
First I want to root my phone, i tried z4root,universal and superoneclick these dont work on my tab, please suggest me a way to root.
I want to install overcome rom where can i find the details on how to install and which version should I use could you suggest any details
rscmurali said:
here are my phone details
Model Name Samsung Galaxy Tab GT-P1000, firmware version-2.3.3,
Baseband version-P1000DDJP4
kernel version-2.6.35.7 [email protected] #4
Build Name: GINGERBREAD.DDJPA
First I want to root my phone, i tried z4root,universal and superoneclick these dont work on my tab, please suggest me a way to root.
I want to install overcome rom where can i find the details on how to install and which version should I use could you suggest any details
Click to expand...
Click to collapse
If you want root you can use a custom kernel that includes root.
http://www.multiupload.com/PC21LDJXIK
Enter in download mode (volume down + power button when the tab if off)
Flash it using odin v1.7, the tar file goes on PDA.
Repartition unchecked, no pit file.
After this the tab will take several minutes to boot, don't worry this is a normal procedure.
After this you will have a EXT4 file system and rootes tab.
If you want the lastest overcome rom:
Warning: this will wipe your data, make a backup of your data and apps with titanium backup.
After you flash the kernel.
http://www.multiupload.com/9F0Z0JU3HJ
Download the file above, copy it to the internal sd of the tab
Then go to the recovery mode (volume up + power button when the tab is off)
Go to Installation menu the select flash zip from internal sd card, and select the zip that you downloaded. Wait until the installation is complete.
The reboot menu > reboot to system.
Hello,
Ok so' I'm noob when it comes to android (probably on most any other).
Anyway, there's rooting using z4root or superoneclick, and then now that I read rafaeker19 post I could use a custom kernel. What I want to ask is that what is the safets way to root the SGT P1000 and make it unrootable?
Play safe
Hello friends Murali & ChevanLemon
It seems that both of u r new here.
The safest way to Root Gingerbread-DDJPA is this one.{Bonus-U can unroot it also.}
http://forum.xda-developers.com/showthread.php?t=1321582
It has rooted my Tab having DDJPA GB.Read all instructions there before u start to root.
ehmmm so what does the different between root and flashing, if i want to root do i need to flash?
I read this: http://forum.xda-developers.com/showthread.php?t=1347899 and somewhat confused.
You don't have to flash to root, but you can if you want too. If you flash a rom like overcomes it will automatically come rooted. But you can, if you want to just stay on stock Android, flash a cf-root kernel with Odin, or use super one click wish is nice and easy .
Sent from my GT-P1000 using Tapatalk
ah I see so i want to install a particular rom then i will need to flash it correct? say since in this case is P1000, how do I get that rom? is there many kind of rom for p1000, what are they? I google it but mostly come up with gingerbread 2.3
rooting gingerbread
i rooted my gingerbread using doomlordz'
http://forum.xda-developers.com/showthread.php?t=1321582
just run the batch file and wait for about 5 mins and its all good. no flashing needed
Okay i have read the rooting method of Zergrush, this is will be my last question for root. If (just incase if it did really happen), If I root the P1000 then one day I decide to unroot it and things gone wrong aka system damaged, I could flash it and get it back to original, correct?
Sorry this will be my question, I think I get the gist of it, but I just want to have assurance from you guys.
flash a stockfirmware via odin and it will be just like when u bought it. thats one of many ways to unroot it. <thats what i do all along...> there is a program somewherehere that downloads lates firmware for devices name is somehing like "fus updater " or anything similar to it, try and search it
Anyone have an idea to root Gingerbread OMKE2, Firmware 2.3.3 SC-01C NTT Docomo? Thanks.
EDIT:
Used DooMLoRD's Easy Rooting Toolkit [v4.0](zergRush Exploit) and it works.
Thanks. ^_^
Rooting assistance
Dear all,
Please help me, I've been trying to root my Samsung Galaxy Tab but been unable so far, here are my device details:
Model: GT-P1000L
Firmware: 2.3.6
Baseband version: P1000LUMJI1
Kernel version: 2.6.35.7
Compilation: GINGERBREAD.UMJR2
I've tried so far with the follosing:
Super One Click runs until step 7, it gets frozen and won't respond even after 25 minutes, retried this process more than 10 times.
DooMLorD runs but on every step it states that the route was not foud, retried this process around 5 times.
z4root runs and wether I select temporary or permanent root it will just start processing and suddenly app will close itself, retried this process around 5 times.
I have read a lot of threads about using ODIN to flash custom firmware, but I've also found a lot of replies where process was unsuccesfull and tab wouldn't turn back on. Because of this I'm reluctant to try it, at least for the moment, since I'm so noob I will have a real hard time flashing back to stock firmware.
Thank you all in advanced for the time you will take reading even if you don't have the answer.
Best regards.
Help
Guys, please help me out with this, I've tried several times to root this tab so I can install CWM and then be able to test CM10.
I might even try the ODIN installation, just please tell me if there is any Noob Guide for Odin the same way it's there for P1000 rooting (wich doesn't work for me).
Or if any good samaritan is willing to guide me step by step so I don't mess up with it.
Please, any pointer will be thanked.
Success
Jo guys,
I've succesfully rooted my SGT7 P1000L with firmware 2.3.6, not as simple as using Super One Click, but not hard either.
The steps I followed are the next ones, they should work as well on P1000 and P1000N with firmware 2.3.6:
Downgrade to stock firmware 2.3.3 using Odin
Root device using Super One Click
Flash CWM Recovery through Heimdall
Indeed, so simple to do and your device is ready to flash custom roms.
For the very very noobs (like me) I found a couple of videos that guide you step by step on how to root and install CWM Recovery the way I listed previously, as a matter of fact those are the videos I followed.
This is a 100% secure if you don't mess with the other options, please be aware I take no responsibility of any damage your device suffers.
For downgrading to 2.3.3 stock firmware:
http://www.youtube.com/watch?v=Mg6MyaR64jE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For rooting and installing CWM Recovery:
http://m.youtube.com/watch?feature=relmfu&v=zUXVqzA4Yoo
Hi Yue_Iohikzu
For rooting only...I have 2.3.6 firmware...I need to flash the rom too or with degrading to version 2.3.3 it's ok?
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clean stock mk2 rom in odex/deodex versions, rooted with knox removed.
STOCK MK2 Odex
Download Link 1: http://www.androidfilehost.com/?fid=23321874045862533
Download Link 2: http://www.mediafire.com/download/qab7pg9peb4jndh/jfltespr_mk2_stock02.zip
MD5 = f70825c41aca163f01a7bbde39e76503
STOCK MK2 Deodex
Download Link 1: http://www.androidfilehost.com/?fid=23269279319200226
Download Link 2: http://www.mediafire.com/download/gkqpzwgg0n08ebh/jfltespr_mk2_deodexed.zip
MD5 = e20e0a909dcf362b2b93d68131fdaa87
------------------
Installation
1. Wipe System, Data, Cache, and Dalvik Cache. Install.
2. Download and flash the new MK2 modem from Unknownforce (reference for more info).
-----------------
Thanks to dsixda for his kitchen and chainfire for SuperSU.
Other resources that may be beneficial:
1. Odin v3.07: http://www.mediafire.com/download/buaug7ssckkb9s9/Odin307.zip
2. If you are having issues with phone/data services, open Dialer and enter ##72786# for a new reset.
Thanks for this but if there is any mirror links on mediafire...i got some problems with androidfilehost because i can not resume my download if there is any problem happened.
Going give this a spin. Downloading now
Love the 90s good times
anees02 said:
Thanks for this but if there is any mirror links on mediafire...i got some problems with androidfilehost because i can not resume my download if there is any problem happened.
Click to expand...
Click to collapse
i added a link to mediafire
runwithme said:
i added a link to mediafire
Click to expand...
Click to collapse
Thank you very much for mediafire link.
There is no one until now test this and inform us.
I am currently downloading the ROM i need may be 5 hours to finish...low speed internet.
Hows the modem on MK2 compared to MJA? my reception and data speeds went downhill with MJA
Snazarian said:
Hows the modem on MK2 compared to MJA? my reception and data speeds went downhill with MJA
Click to expand...
Click to collapse
I have no difference with two modems...but i like to be updated to the latest version.
I tested the ROM and it worked fine without problems.
now i remove some bloatware.
Thanks for this post.
When I try to flash the modem it says failed.
Downloaded it multiple times...
You do this from within the rom correct?
"4. Install either Root Explorer or Root Browser and delete the following Knox files "
I have tried this 3 times now, and I am stuck at the "Samsung Galaxy S4:" screen, with "Set warranty bit: Kernel" in yellow in the top left corner. Will not move past that...
jmilch said:
When I try to flash the modem it says failed.
Downloaded it multiple times...
You do this from within the rom correct?
"4. Install either Root Explorer or Root Browser and delete the following Knox files "
I have tried this 3 times now, and I am stuck at the "Samsung Galaxy S4:" screen, with "Set warranty bit: Kernel" in yellow in the top left corner. Will not move past that...
Click to expand...
Click to collapse
Download the mk2 modem from http://forum.xda-developers.com/showpost.php?p=42954149&postcount=2
If you want to flash a new modem, then you could use Odin for Windows. Google will be helpful for more information and you might want to also check out this thread http://forum.xda-developers.com/showthread.php?t=927568
If you want to flash the new modem from your phone AND you have the NEW bootloader, you could use Mobile Odin Pro. Check out this thread for more information: http://forum.xda-developers.com/showthread.php?t=2363257
hey guys im coming from the sprint lg optimus g and today i bought an sprint s4 for 200 bucks. its rooted on no wiz rom i belive ( 4.2.2 ) and i keep getting the 4.3 message. so what i would like to now is can i flash this rom and it will update me to 4.3 with out the knox thing.
2.Also do i remove knox before or after i flash the rom... thanks in advance guys
mf9 bootloader + mk2 software update + mk2 modem update = flawless victory!
blarg said:
mf9 bootloader + mk2 software update + mk2 modem update = flawless victory!
Click to expand...
Click to collapse
FATALITY
Love the 90s good times
blarg said:
mf9 bootloader + mk2 software update + mk2 modem update = flawless victory!
Click to expand...
Click to collapse
I am currently on MJA software, MJA baseband, ktoonsez kernel, MJA build #, but have the MF9 bootloader yet. Can I simply update the ROM and nothing else, maintaining root and all my current settings?
I have seen a lot of Stock ROMs but some of them haven't got Data Toggle in notifications where did this toggle go?
neno2323 said:
hey guys im coming from the sprint lg optimus g and today i bought an sprint s4 for 200 bucks. its rooted on no wiz rom i belive ( 4.2.2 ) and i keep getting the 4.3 message. so what i would like to now is can i flash this rom and it will update me to 4.3 with out the knox thing.
2.Also do i remove knox before or after i flash the rom... thanks in advance guys
Click to expand...
Click to collapse
The current version of the rom already has knox removed. I would recommend you backup all your data via Titanium Backup and then do a clean wipe before you install 4.3.
legasus233 said:
I am currently on MJA software, MJA baseband, ktoonsez kernel, MJA build #, but have the MF9 bootloader yet. Can I simply update the ROM and nothing else, maintaining root and all my current settings?
Click to expand...
Click to collapse
You also also need to update the modem in order for wifi to work. The bootloader should not be affected by updating the rom or the modem.
anees02 said:
I have seen a lot of Stock ROMs but some of them haven't got Data Toggle in notifications where did this toggle go?
Click to expand...
Click to collapse
Samsung decided to remove the data toggle in the new updates. I miss that feature too..
legasus233 said:
I am currently on MJA software, MJA baseband, ktoonsez kernel, MJA build #, but have the MF9 bootloader yet. Can I simply update the ROM and nothing else, maintaining root and all my current settings?
Click to expand...
Click to collapse
I don't know - I didn't chance it. I did a nandroid backup, backed up my Nova settings, backed up my SMS messages...basically backed up all the configs I could to my SD card.
Then I used Philz recovery - did a "wipe to install a new ROM", wiped Dalvik cache, wiped everything else again just for good measure.
Then I installed the software update via Philz, and rebooted into download/flash mode (there's an option in Philz to do that).
Then flash the MK2 modem using Odin - uncheck reset clock and auto reboot. When I got the "PASS" I did a battery pull and booted the phone.
When the phone came back up, did the initial setup (skip setting up gmail and other accounts until after you've disabled auto update and auto download apps in Play Store), and shut down. Flashed SuperSU 1.86 and booted again. Installed Root Explorer and deleted all the Knox crap (instructions in first post).
Installed TiBu. Disabled/Froze bloat through system or TiBu. Reinstalled all my apps from the appstore and restored settings and SMS from the saves on my SD card.
This update has the stock kernel, but it works and there are no WiFi issues. I was using the KT kernel on MJA, but only because there were WiFi issues - every time I tried to tweak something my phone would go all unstable and wonky so I just left all the tweaker settings alone. This update is already rooted as well, but you will need to re-flash the newest version of SuperSU before it will work (instructions in the link to SuperSU in the first post). As long as you still have custom recovery and MF9 bootloader you won't lose root and if you do, you can regain it pretty easily.
Make sure the modem update takes - I actually ended up doing it twice (first time with autoreboot and reset clock enabled didn't take). If the modem update doesn't work you WILL have WiFi issues until it updates successfully.
MK2 is running MUCH better than MJA. I had all kinds of problems on MJA with iffy performance, sudden crazy battery drain, and hard crashes when getting phone calls. None of that now and everything is running much smoother.
can we use twrp for this rom .. or Philz only ? has anyone tried ?
I would like to go back stock ..
bsimcox said:
can we use twrp for this rom .. or Philz only ? has anyone tried ?
I would like to go back stock ..
Click to expand...
Click to collapse
Update 1-1-14: You should be able to use any recovery to flash the rom but be sure to wipe all the pertinent partitions first. Personally, I would recommend the official ClockWorkMod recovery. I have had better experience with this recovery in flashing new roms.