Lately I was flashing mi3 trough fastboot on w7ulti64bit when something went wrong and now its cold dead.
I have been looking for solution everywhere and as usual xda is my last resort for help with phones, usually I found here what I was looking for but this time it is first time when I have to post new threat.
So basically I found that battery controller had some cold soldier on chip, whole module gives 0v while cell itself 2,8v so I think I fixed it since now whole battery module shows 3.3v and cell itself 3.8v after charging.
But im unable to wake up phone in to fastboot or any other way to reflash it.
When connected to 2000mAh charger there is solid red light, when connected to PC it lit for a second then goes off and PC recognizes mi3 as USB input device and HID compliant device.
I have tried to update drivers for those devises so miflash would recognize it and allow to flash it but without any success.
Any idea what else I could do with it, or how to force flash to flash at least boot sector?
Shamoth said:
Lately I was flashing mi3 trough fastboot on w7ulti64bit when something went wrong and now its cold dead.
I have been looking for solution everywhere and as usual xda is my last resort for help with phones, usually I found here what I was looking for but this time it is first time when I have to post new threat.
So basically I found that battery controller had some cold soldier on chip, whole module gives 0v while cell itself 2,8v so I think I fixed it since now whole battery module shows 3.3v and cell itself 3.8v after charging.
But im unable to wake up phone in to fastboot or any other way to reflash it.
When connected to 2000mAh charger there is solid red light, when connected to PC it lit for a second then goes off and PC recognizes mi3 as USB input device and HID compliant device.
I have tried to update drivers for those devises so miflash would recognize it and allow to flash it but without any success.
Any idea what else I could do with it, or how to force flash to flash at least boot sector?
Click to expand...
Click to collapse
Try mi flash tool
Main problem is that I have tried all 3 miflash I could found 2.11.6 20131108 20140509 and none of them recognizes device and I can't even initiate flashing process ;/
it sounds like a driver issue. just download all the drivers you can find for your phone.
Shamoth said:
Lately I was flashing mi3 trough fastboot on w7ulti64bit when something went wrong and now its cold dead.
I have been looking for solution everywhere and as usual xda is my last resort for help with phones, usually I found here what I was looking for but this time it is first time when I have to post new threat.
So basically I found that battery controller had some cold soldier on chip, whole module gives 0v while cell itself 2,8v so I think I fixed it since now whole battery module shows 3.3v and cell itself 3.8v after charging.
But im unable to wake up phone in to fastboot or any other way to reflash it.
When connected to 2000mAh charger there is solid red light, when connected to PC it lit for a second then goes off and PC recognizes mi3 as USB input device and HID compliant device.
I have tried to update drivers for those devises so miflash would recognize it and allow to flash it but without any success.
Any idea what else I could do with it, or how to force flash to flash at least boot sector?
Click to expand...
Click to collapse
Same problem here, waiting for someone give the solution
if the device is not getting detected in any of the mi flash tools,i feel its a clear sign of driver issues ,
ZenR2 said:
if the device is not getting detected in any of the mi flash tools,i feel its a clear sign of driver issues ,
Click to expand...
Click to collapse
r u following correct procedure for using MI flash tool ?
is ur Phone able to boot to FLash mode ( turn phone off > Press volume + Key then Press Power on - it will show flash mode )
Now Open MI Flash tool > Press Refesh > it will show phone now ( a number will b shown instead of name Xiamo Mi3)
Now Extract Fastboot rom to C Drive ( it should look like this C:\ROM (Location should not cointain space)
Now click Browse > advance > select C:\ROM\Folder\ select bat file
Its not drivers issue since its get detected as QUALCOMM HS-USB QDLoader 9008 or QUALCOMM HS-USB Diagnostic 9006 depending of its state.
In QDLoader it is recognized by miflash as COM20 device and I can upload by miflash or qpst boot image, then it switches to diagnostic that is recognized by some sort of string and I can upload/proceed with rest of rom flashing that includes creating partitions and writing data to them.
Main problem is that when its successfully flashed it is still cold dark, while PC can see it and all partitions like 28 of them...
And I think its related to the fact that qpst reports phone as in download mode.
Any idea how to exit that mode, like in Mi2 that was forced to enter "service" by shortening some pins to put it download mode to flash cold dead ones?
agdag said:
magdag from en.miui.com forum seems to be able to hekp ..or try [email protected] , jason provide paid service
Click to expand...
Click to collapse
You were already looking at it
Kinda wasted a lot of Mine and Yours time and some of my money
If You got any other ideas since that time how to resurrect it just let me know.
Any solution?
Is there any solution to this problem? My phone has been cold brick for 3 days now. Doesnt boot up or charge up. Detected on connecting to PC with a sound, but Shows as Com 10 or 20 on Miflash and thus cannot be flashed.
Cannot boot into fastboot as well.
Anyone anything?
androidy88 said:
Is there any solution to this problem? My phone has been cold brick for 3 days now. Doesnt boot up or charge up. Detected on connecting to PC with a sound, but Shows as Com 10 or 20 on Miflash and thus cannot be flashed.
Cannot boot into fastboot as well.
Anyone anything?
Click to expand...
Click to collapse
You can check the steps I took for recovering from a similar problem here: http://en.miui.com/forum.php?mod=viewthread&tid=22811
If you have any other questions, tag me on your reply and i'll try my best to help.
My Moto g2 was on stock rom with no root. A friend tried to root it with king root and some other things without asking me . My phone ran out of charge and then when i tried to switch it on it went straight to ap-fastboot menu. Now, when i connect charger it shows charging screen at 0% and then goes to fastboot after some time. With some things written.
It says at the end :
1. Hab check failed for boot. 2. Failed to verify hab image boot. 3. Failed to validate boot image 4. Fastboot reason : fall through from mot charger boot mode.
Also it says battery low Device is LOCKED Status code: 0 and connect USB data cable even when connected.
Also i can't install usb drivers as my pc doesn't detect it once did but the Dialog box of "installing drivers" vanished midway.
So my phone won't charge or connect to pc so i can't use some adb and fastboot tool method for charging i found searching on the internet. And also it keep going from fast boot to charging screen and back Been searching all day but have become confused now.
So if someone can help in flashing my stock firmware bypassing all these problems. I'll be thankful.
hello all !
As indicated in the title my phone is blocked in edl mode ...
This happened when I activated the encryption ... But strangely sometimes I can start it by pressing buttons but it's random and as soon as I restart it is new block ...
I have already flash several roms on miflash (Qualcomm qdloader 9008), I tried to connect it for several days, I can not start fastboot nor in recovery (I was able to start once on it but it m ' Is impossible to do it again ...).
Would anyone have a solution? Knowing that I have opened my phone to disconnect the battery and perform a test point so my guarantee is dead ...
Thanks for the help you bring me
Ttgf
Hello, I tried to flash kitkat, I run flashtool and start flashing it but after a while in the middle of flashing it says device disconnected. After that if I connect it to my PC in flashmode it says it has a problem with this device, I can see it in the device manager as an unknown device, device ID is USB/UNKNOWN, fastboot mode says its a sony ADB interface but when I click on it it says it cannot run this device, the device ID is USB/VID_0FCE&PID_0DDE&REV_0100. Is there any way I can repair it? If I try to power up my phone the sony logo appears and it says the software update failed. If I connect it to charger its the same, no battery appears. If someone know how to rescue it please reply, I buyed it yesterday and its already broken
Now I check it on flashtool, after I connect the usb while pressing vol up button it says device connected in fastboot mode but when I click on check current device status it says device status: not found, also get device info says this action can only be done in fastboot mode
And now my PC doesn't notice if something is connected, no device problem pop up, just nothing. Now when I connect it to the charger the led flash red one short time and nothing
EDIT: now i charged it for a while and PC see it again, on charging bootloop with software update failed
Try to flash stock firmware with flashtool and see if it even recognizes it.
I have been using the phone for almost two years, without any problem, with a ROM from xiaomi.eu.
One day the phone suddenly went off, and I couldn't turn it on again. When I plugged it into the PC it recognized it as QLoader HS-USB 9008. I tried to flash another ROM but could not go into fastboot mode.
I decided to open it and unplug the battery, in case it was still on and without a screen, and when I reassembled it, I was able to go into fastboot mode and flash. MiFlash never gave the termination notice, and since then the phone has not responded, the computer does not recognize it, nor does it react to anything (it no longer recognizes it as QLoader HS-USB 9008). I've tried an EDL cable to do deep flash, but it doesn't work either.
I have read that there are some test points to start EDL mode, but I don't know if it will work. Do you know if it would work for this case? I also haven't managed to find a good manual to do this.
Any other idea?
Thank you very in advance.