I wanted to flash a recovery but before I could use fastboot my phone freezed in adb mode.
The freeze is lasting forever and nothing works...
If you've done nothing and haven't used fastboot then just hold the power button down until the phone reboots.
Sent from my GT-P5210 using Tapatalk
Related
Hello,
I got one S5830, it was locked by wrong pin. I was unable to wipe with recovery because of stucking in it. Vol+/- not working at all. And couldn't enter download mode. So I made jig and phone entered download mode as planned, but after flashing via Odin, it started to blink with backlight and stopped booting. I unplugged battery and put it back. Phone starts with Samsung logo, blinks briefly 1-2 times and reboots again.
Jig doesn't working anymore, just power on phone and bootloops with Samsung logo. Only ramdump mode works.
If I plug it to PC while booting it only blinks with backlight, Odin can't see it, Device manager too.
Is there any way to fix this device without service center?
Thanks in advance.
unkn00wn said:
Hello,
I got one S5830, it was locked by wrong pin. I was unable to wipe with recovery because of stucking in it. Vol+/- not working at all. And couldn't enter download mode. So I made jig and phone entered download mode as planned, but after flashing via Odin, it started to blink with backlight and stopped booting. I unplugged battery and put it back. Phone starts with Samsung logo, blinks briefly 1-2 times and reboots again.
Jig doesn't working anymore, just power on phone and bootloops with Samsung logo. Only ramdump mode works.
If I plug it to PC while booting it only blinks with backlight, Odin can't see it, Device manager too.
Is there any way to fix this device without service center?
Thanks in advance.
Click to expand...
Click to collapse
I had a similar situation and after that my Ace is gone into deep sleep. In the beginning Odin has recognized him but after no unfortunately hard brick.
Can you enter the recovery after flash and do the volume buttons work???
Sent from ma' d¡©|< to your @$$
adb reboot recovery
or use qtadb
and delete stuff in data partition
Sent from my ST25i using xda premium
DeadSp1d3r said:
adb reboot recovery
or use qtadb
and delete stuff in data partition
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
Sorry, but how to use adb in ramdump mode?
My PC cannot see damn phone in any other cases.
TechNoJerky said:
Can you enter the recovery after flash and do the volume buttons work???
Sent from ma' d¡©|< to your @$$
Click to expand...
Click to collapse
I can't enter recovery, can't use any other mode but ramdump. Looks like vol buttons works because i can reach ramdump. But if I try to boot other mode, it only blinks logo and bootloops as I wrote in top.
Guys.. since i unlocked the bootloader im no longer able to restart in fastboot mode. I hold the vol- and power but nothing happens. It just show the warning unlocked boot logo and start the phone. I need to restart in recovery mode and restore my phone from a bkp...
Sent from my XT890 using xda app-developers app
When it vibrates as before - quickly release the power button only
Sent from my XT890 using xda app-developers app
I wonder is the OP referring to the changed sequence after the Jelly Bean update?
I have a different 'fastboot not working' problem - many of us have bricked phones saying 'service required, code corrupt'. Everyone with this brick seems to be saying they cannot get the device in fastboot.
Had the same problem, all I had typo do was wait for the screen to flicker and then I let go of both buttons. That'll take you straight to fast boot mode
Sent from my XT890 using xda app-developers app
hi, i have a big problem.
I can enter in the boot selection menu with vol+ and vol- button but when i select ap fastboot, the razr turn off and if i connect to the pc, it doesn't be recognised and i can't reflash the rom.
Any solution? i read a lot of topics but no way to solve until now! :crying:
thanks,
gs
Phone stuck bootlooping and volume down + power not working.....what can i do?
How long is it accessible before rebooting?
You might connect it to your computer, and ready a command window with the command:
adb reboot bootloader
Then as soon as the phone boots up and connects hit enter and run the command. You might be able to sort circuit the loop in that fashion.
Sent from my One using xda app-developers app
try holding it up to a bright light
and try doing it again
Hi I was trying to flash recovery via goomanager and as it restarted nothing happened, complete black screen, no buttons flashing or anything on screen. Plz help me
Which recovery?
Sent from my HTC One using xda app-developers app
shahid7624 said:
Hi I was trying to flash recovery via goomanager and as it restarted nothing happened, complete black screen, no buttons flashing or anything on screen. Plz help me
Click to expand...
Click to collapse
Are you trying to flash TWRP?
What happend when you press the power button for a long time?
Normaly the 2 buttons should blink, then the One goes really off and then it starts with the htc logo.
Is this happend?
What recovery you using? What Rom? Its rooted i think?
Hold the power button and volume-down until the device turns on. Then keep holding volume-down until the fastboot screen starts. Can you enter recovery? If so, clear cache. If not, get in fastboot mode, connect to USB, and run "fastboot erase cache". (You need your drivers and fastboot program set up on your computer.) If that doesn't allow booting to system and recovery, reinstall recovery using fastboot: fastboot flash recovery twrp.img. Then boot to TWRP (via fastboot, navigating the menus using the power and volume buttons). You can the nreinstall a ROM, and if needed, factory reset.
Hi all. I got a Cherry Mobile One (Sprout8) and it's bootlooping into recovery mode, then to "Installing system update..." loading screen; but the loading bar never finishes. And then reboots all over again doing the same thing. It does this everytime the phone is turned on. I cant get to fastboot by holding the vol up + power button combo either. I tried flashing via SPFT tools but it doesn't get detected even when I installed the drivers from different threads
I didn't root it; my 1 year old daughter did something i have no idea what when it came to this. PLEASE HELP ME OUT guys! Thanks in advance...
Pull out battery and reinsert it,simply switch it on
Sent from my Spice Mi-498 using Tapatalk
rabsarkar said:
Pull out battery and reinsert it,simply switch it on
Sent from my Spice Mi-498 using Tapatalk
Click to expand...
Click to collapse
Thanks but if i insert the battery while turned off, and connects via USB, it automatically repeats the bootloop.
Try flashing stock ROM by fastboot method
Sent from my YU5510A using Tapatalk