Database Develop

[Q] S5830 bricked after JIG.

Hello,
I got one S5830, it was locked by wrong pin. I was unable to wipe with recovery because of stucking in it. Vol+/- not working at all. And couldn't enter download mode. So I made jig and phone entered download mode as planned, but after flashing via Odin, it started to blink with backlight and stopped booting. I unplugged battery and put it back. Phone starts with Samsung logo, blinks briefly 1-2 times and reboots again.
Jig doesn't working anymore, just power on phone and bootloops with Samsung logo. Only ramdump mode works.
If I plug it to PC while booting it only blinks with backlight, Odin can't see it, Device manager too.
Is there any way to fix this device without service center?
Thanks in advance.

unkn00wn said:
Hello,
I got one S5830, it was locked by wrong pin. I was unable to wipe with recovery because of stucking in it. Vol+/- not working at all. And couldn't enter download mode. So I made jig and phone entered download mode as planned, but after flashing via Odin, it started to blink with backlight and stopped booting. I unplugged battery and put it back. Phone starts with Samsung logo, blinks briefly 1-2 times and reboots again.
Jig doesn't working anymore, just power on phone and bootloops with Samsung logo. Only ramdump mode works.
If I plug it to PC while booting it only blinks with backlight, Odin can't see it, Device manager too.
Is there any way to fix this device without service center?
Thanks in advance.
Click to expand...
Click to collapse
I had a similar situation and after that my Ace is gone into deep sleep. In the beginning Odin has recognized him but after no unfortunately hard brick.

Can you enter the recovery after flash and do the volume buttons work???
Sent from ma' d¡©|< to your @$$

adb reboot recovery
or use qtadb
and delete stuff in data partition
Sent from my ST25i using xda premium

DeadSp1d3r said:
adb reboot recovery
or use qtadb
and delete stuff in data partition
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
Sorry, but how to use adb in ramdump mode?
My PC cannot see damn phone in any other cases.

TechNoJerky said:
Can you enter the recovery after flash and do the volume buttons work???
Sent from ma' d¡©|< to your @$$
Click to expand...
Click to collapse
I can't enter recovery, can't use any other mode but ramdump. Looks like vol buttons works because i can reach ramdump. But if I try to boot other mode, it only blinks logo and bootloops as I wrote in top.

Fastboot mode not working

Guys.. since i unlocked the bootloader im no longer able to restart in fastboot mode. I hold the vol- and power but nothing happens. It just show the warning unlocked boot logo and start the phone. I need to restart in recovery mode and restore my phone from a bkp...
Sent from my XT890 using xda app-developers app

When it vibrates as before - quickly release the power button only
Sent from my XT890 using xda app-developers app

I wonder is the OP referring to the changed sequence after the Jelly Bean update?
I have a different 'fastboot not working' problem - many of us have bricked phones saying 'service required, code corrupt'. Everyone with this brick seems to be saying they cannot get the device in fastboot.

Had the same problem, all I had typo do was wait for the screen to flicker and then I let go of both buttons. That'll take you straight to fast boot mode
Sent from my XT890 using xda app-developers app

hi, i have a big problem.
I can enter in the boot selection menu with vol+ and vol- button but when i select ap fastboot, the razr turn off and if i connect to the pc, it doesn't be recognised and i can't reflash the rom.
Any solution? i read a lot of topics but no way to solve until now! :crying:
thanks,
gs

[I9001] Phone stuck in bootloop

I don't know how the issue started. I have been using CM10 for almost 2 months without issues. I restarted the phone and boom! It was stuck in a bootloop with that boot animation keeping appearing all the time. I tried a factory reset, flashing the ROM again, flashing another ROM, and even flashing the stock ROM with all the images using ODIN. It was still stuck on the boot animation. I was surprised that the last solution didn't work because everytime I did it, the phone recovered from the bootloop.
I can still enter into download and recovery mode.

SudoHalt said:
I don't know how the issue started. I have been using CM10 for almost 2 months without issues. I restarted the phone and boom! It was stuck in a bootloop with that boot animation keeping appearing all the time. I tried a factory reset, flashing the ROM again, flashing another ROM, and even flashing the stock ROM with all the images using ODIN. It was still stuck on the boot animation. I was surprised that the last solution didn't work because everytime I did it, the phone recovered from the bootloop.
I can still enter into download and recovery mode.
Click to expand...
Click to collapse
Go through this broodplank1337's guide to recover boot loop
http://forum.xda-developers.com/showthread.php?t=1660596
Sent from my GT-I9001 using xda premium

Samsung GT-I9000 boot into recovery mode after pressing the power button
Not sure it is the same problem or not, but my phone (Samsung Galaxy S GT-I9000) keeps booting into recovery mode everytime I turn on the phone by pressing the power button. I tried to root with the stock PIT file and stock ROM or CWM recovery and stock ROM or any customized ROM, such as CMD 10.1, but it still boots into the recovery mode every time I turn on the phone WITHOUT using any combo keys, e.g. VOL down, Home and Power buttons).
The thing is that the recovery mode is not looping. Basically, after I press just the POWER button, the phone boots into the recovery mode and stay there.
Please help!
Many thanks!!!

nhac1234 said:
Not sure it is the same problem or not, but my phone (Samsung Galaxy S GT-I9000) keeps booting into recovery mode everytime I turn on the phone by pressing the power button. I tried to root with the stock PIT file and stock ROM or CWM recovery and stock ROM or any customized ROM, such as CMD 10.1, but it still boots into the recovery mode every time I turn on the phone WITHOUT using any combo keys, e.g. VOL down, Home and Power buttons).
The thing is that the recovery mode is not looping. Basically, after I press just the POWER button, the phone boots in the recovery mode and stay there.
Please help!!!
Click to expand...
Click to collapse
help!
Sent from my GT-I9505 using xda app-developers app

no ROM inside? hav u flashed one? what it said after flash with cwm?
Sent from my GT-I9000 using xda premium

Hey you are gonna want to flash a stock image using odin which will solve your problem. There should be a guide somewhere

My problem is solved, I had to go to "Mounts and storage" in recovery and choose "format /cache"
nhac1234 said:
Not sure it is the same problem or not, but my phone (Samsung Galaxy S GT-I9000) keeps booting into recovery mode everytime I turn on the phone by pressing the power button. I tried to root with the stock PIT file and stock ROM or CWM recovery and stock ROM or any customized ROM, such as CMD 10.1, but it still boots into the recovery mode every time I turn on the phone WITHOUT using any combo keys, e.g. VOL down, Home and Power buttons).
The thing is that the recovery mode is not looping. Basically, after I press just the POWER button, the phone boots into the recovery mode and stay there.
Please help!
Many thanks!!!
Click to expand...
Click to collapse
What you have to do is to flash the boot loader, I had the same exact problem and this solved it. But our devices are different so I don't think my boot loader will work on yours.
Sent from my GT-I9001 using xda app-developers app

compacity said:
no ROM inside? hav u flashed one? what it said after flash with cwm?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
After I flashed either stock or custom ROM, the phone reboots right into CWM recovery mode and stays there???!!!
---------- Post added at 09:19 AM ---------- Previous post was at 09:08 AM ----------
SudoHalt said:
My problem is solved, I had to go to "Mounts and storage" in recovery and choose "format /cache"
What you have to do is to flash the boot loader, I had the same exact problem and this solved it. But our devices are different so I don't think my boot loader will work on yours.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Thanks. Let me try that. Will keep you updated. Do you know where I can get the boot loader?

Semaphore logo

Hi everybody,
I have a BIG problem: today I've try to install REMICS-JB 3.0.1 rom, but unfortunately my phone starts with the logo "SEMAPHORE" and I can't enter in recovery menu by pressing the home, vol up and power buttons. I can't enter in download mode too (home, vol down. power), cause the logo remains on the screen. any ideas on how to solve this problem?
thanks.

Pull te batter and reinsert it, then try to enter recovery again. Try full wiping then reinstalling.
Sent from my GT-P7510 using Tapatalk HD

he say no download mode either, try jig to gain it
Sent from my GT-I9000 using xda premium

[Q] [HELP] I think I bricked my phone

I wanted to flash a recovery but before I could use fastboot my phone freezed in adb mode.
The freeze is lasting forever and nothing works...

If you've done nothing and haven't used fastboot then just hold the power button down until the phone reboots.
Sent from my GT-P5210 using Tapatalk