Database Develop

[ROM][CM11][NON-CAF][4.4.4][SEP28] temasek's UNOFFICIAL Build

original thread and dev: http://forum.xda-developers.com/showthread.php?t=1797109
NOTE
This is an UNOFFICIAL build of CM11 (CyanogenMod 11) for Mako and by NO means this is temasek's or my ROM. I am just compiling from CM Source and 100% credits goes to all coders who contributes to CyanogenMod.
This is similar to a nightly from CM but has some extra goodies baked in. If you can't handle some things possibly being broken, please don't use this and then complain to me for building it.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
I hope all of you like this ROM. Remember to VOTE this thread if you like it.
Do NOT expect daily builds. I'll build when I'm free.
Do NOT use this unofficial build and ask for support at the official threads.
Do NOT be rude.
Respect all users
If you see a NOOB question and you don't feel like replying, DON'T, just ignore that post. If you do reply, good for you.....and be nice in your reply.
Please use the latest official TWRP recovery. CWM is fine too, but I believe TWRP is more stable (plus, TWRP is better imo).
Read this first -> CLICK ME
1st Time Installing
Download the zip
Download Gapps
WIPE DATA/FACTORY RESET
Install the update zip from recovery
Install gapps
Reboot
Already installed CM11.0
Download the zip
Install the update zip from recovery
Reflash gapps (if you are using pa gapps)
Reboot
FAQ/KNOWN ISSUES
Click to expand...
Click to collapse
FAQ
Details (regarding kernels)
Yes, this ROM has CAF (not anymore, as of 6/04)
Although this has CAF, you can download some CAF kernels made by this wonderful user @xtrymind
http://www.androidfilehost.com/profile.php?uid=23269279319201455
http://forum.xda-developers.com/nex...ial-cm-compatible-franco-faux-t2487246/page35
http://forum.xda-developers.com/nexus-4/development/unofficial-cm-compatible-franco-faux-t2487246 (ziddey is OP of thread)
ak kernels are good as well. http://forum.xda-developers.com/nexus-4/orig-development/kernel-ak-t2473454
I highly recommend @defconoi's kernels. They're feature filled and are good. Give it a try! http://forum.xda-developers.com/showthread.php?t=2845768
Known Issues (CLICK BELOW to UNHIDE)
None that I know of
Changelog (I suggest checking github for what is included up to the ROM date)
http://forum.xda-developers.com/showpost.php?p=29339092&postcount=2
https://github.com/temasek
* there are also extra goodies from me
DOWNLOAD SITES:
http://www.androidfilehost.com/?w=files&flid=12259
* mirrors are welcomed
* starting from the 6/04 build, there will be no CAF and AOSP kernels can be used
CREDITS
temasek
Google
Oracle (for VirtualBox)
Ubuntu
ViPER520 and zhuhang for Viper4Android http://vipersaudio.com/blog/
Ricardo Cerqueira aka rmcc
XpLoDWilD
entropy512
David van Tonder
TeamDouche
SlimROM
OmniROM
AOKP
CarbonROM
ChameleonOS
ParanoidAndroid
Yank555
AndreiLux
AndiP71
DerTeufel
PartimusPrime (bootanimation for temasek builds)
MisjudgedTwat (contributor to github sources)
Cristiano Matos
ex-temasek kernel stweaks master in-chief
SleepinDevil (his assistance to troubleshoot/fix bugs)
morckx for his contributions towards making stweaks available to temasek kernel
MrxSiN & MiracleM4n for his stweaks contributions
Vadonka (sponsor of temasek.hopto.org server)
powwow88 (creator of my custom cm10 bootanimation)
paour (contributor to github sources)
All other coders for making CM possible!

Mirrors:
http://mirror.lnx.im/android/mako/temasek-cm11/ -> thanks to @jolinnard

reserved again

I'll try, thanks

slipknot31 said:
I'll try, thanks
Click to expand...
Click to collapse
if you find any bugs, let me know. I may not be able to fix them, but perhaps it could be from one of my cherry-picks. but there doesn't seem to be any problems. I have been using it for a couple of days

0.0 said:
if you find any bugs, let me know. I may not be able to fix them, but perhaps it could be from one of my cherry-picks. but there doesn't seem to be any problems. I have been using it for a couple of days
Click to expand...
Click to collapse
it is still early to see errors, first impressions very good, fast and has all great job
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

0.0 said:
if you find any bugs, let me know. I may not be able to fix them, but perhaps it could be from one of my cherry-picks. but there doesn't seem to be any problems. I have been using it for a couple of days
Click to expand...
Click to collapse
Temasek's build! his thread is the flashaholics paradise from when I had an s3! I'll give it a try later.
Sent from my Nexus 10 using Tapatalk

Finest i9300 now for our N4.
Temasek is a great guy and with a great ROM.

Cristiano Matos said:
Finest i9300 now for our N4.
Temasek is a great guy and with a great ROM.
Click to expand...
Click to collapse
Cristiano is the better guy
Missed him around i9300 community

temasek said:
Cristiano is the better guy
Missed him around i9300 community
Click to expand...
Click to collapse
What phone are you using now? I didn't have an xda account while having the s3 so I didn't have any comments in the s3 section (passed the s3 to my mum as she loves it).. I used to run your ROM since v1 and flash every nightly. It was fun
Sent from my Nexus 10 using Tapatalk

Targaeryan said:
What phone are you using now? I didn't have an xda account while having the s3 so I didn't have any comments in the s3 section (passed the s3 to my mum as she loves it).. I used to run your ROM since v1 and flash every nightly. It was fun
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Samsung Galaxy Note 3 (N9005) is my primary phone.

a new update is up. minor additions. more like a bug fix build

temasek said:
Samsung Galaxy Note 3 (N9005) is my primary phone.
Click to expand...
Click to collapse
A beast of a phone! Nice to see you drop by the n4 section
Sent from my Nexus 4 using Tapatalk

0.0 said:
a new update is up. minor additions. more like a bug fix build
Click to expand...
Click to collapse
use what works perfectly, very good ROM

Temasek!! Great to see you here!
I always loved your roms on my old LG Optimus Speed. I flashed every nightly, it was the best rom ever!
I flash this rom instantly on my nexus 4
My Temasek addiction begins again

Cydras said:
Temasek!! Great to see you here!
I always loved your roms on my old LG Optimus Speed. I flashed every nightly, it was the best rom ever!
I flash this rom instantly on my nexus 4
My Temasek addiction begins again
Click to expand...
Click to collapse
Focus your attention to @0.0
He is the one that brings the build to u guys. I'm just paying a visit.

Nice to have you back

a short video of this great rom https://www.youtube.com/watch?v=liFRiYIuIm4&feature=youtube_gdata_player

slipknot31 said:
a short video of this great rom https://www.youtube.com/watch?v=liFRiYIuIm4&feature=youtube_gdata_player
Click to expand...
Click to collapse
I'm glad you're liking the ROM
Sent from my Nexus 4

another update has been uploaded. it'll be the one with "v2" in the name, since there is another build with the same date

[ROM][5.1.X]The Android Open Source Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Android Open Source Project​
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What is AOSP?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
"Anyway to get a working system I added some changes from CodeAurora Forum and CyanogenMod. I added also 3 non-AOSP features for a better user experience (Advanced Reboot, "Clear All" button in Recents and an option to delete screenshots from notification) and I'm NOT going to add something other." - @Alberto97
NOTE: THE KERNEL INCLUDED WITHIN THE ROM PACKAGE DOESN'T WORK. YOU WILL HAVE TO FLASH THE AOSP-FIX.ZIP
Instructions:
1. Flash the ROM zip
2. Flash AOSP-FIX.zip
I have a feeling this will result in no WiFi. If WiFi doesn't work, flash Boeffla kernel, then flash the AOSP-FIX.zip file. If you want Boeffla kernel, flash the AnyKernel package as the official package won't work!
I do not suggest you flash gapps at first boot. If it works for you, well and good (let me know lol).
Downloads:
ROM (Includes the AOSP-FIX.zip)
Boeffla Anykernel (In case you ever need it )
Bugs:
Bluetooth is messed up
CAN'T FIND RECENTS! UGH
Thanks to:
@mcgi5sr2
@Alberto97
Google (Android)
CyanogenMod
Anyone left out, feel free to contact me
Sources:
ROM- https://github.com/F-AOSP
Kernel- https://github.com/mcgi5sr2/kernel_samsung_smdk4412
Trees- https://github.com/Alectradar/aosp_device_samsung_i9300
XDA:DevDB Information
AOSP for the i9300, ROM for the Samsung Galaxy S III I9300
Contributors
Gokulbalram, mcgi5sr2
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-04-13
Last Updated 2015-09-13

Reserved

Good job bro

rap_turkez said:
Good job bro
Click to expand...
Click to collapse
Thanks dude
Sent from my SM-T531

Guys are u sure u will be able to handle all these unofficial releases u bring to us?? it seems u don't leave much space for other possible developers to bring roms haha
i would rather have one or two good stable roms (and most importantly updated regularly) then having 6-7 roms that are not regularly updated,unfixed ect
anyway props to @Gokulbalram @rap_turkez for builds roms for our s3 !! :victory:

Scorpionea said:
Guys are u sure u will be able to handle all these unofficial releases u bring to us?? it seems u don't leave much space for other possible developers to bring roms haha
i would rather have one or two good stable roms (and most importantly updated regularly) then having 6-7 roms that are not regularly updated,unfixed ect
anyway props to Gokulbalramrap_turkez for builds roms for our s3 !! :victory:
Click to expand...
Click to collapse
I had kept a limit on how many ROMs I will maintain, I kept it at an initial 4, but then when I saw that it'd be possible to get AOSP, I had to break that barrier and make it 5. I'm an official maintainer for 2 ROMs, so even they are on the way!
Anyway, 'nuff said. Enjoy/

Scorpionea said:
Guys are u sure u will be able to handle all these unofficial releases u bring to us?? it seems u don't leave much space for other possible developers to bring roms haha
i would rather have one or two good stable roms (and most importantly updated regularly) then having 6-7 roms that are not regularly updated,unfixed ect
anyway props to @Gokulbalram @rap_turkez for builds roms for our s3 !! :victory:
Click to expand...
Click to collapse
No prob about it, i hqve a lot of free time, And all my roms are constantly updated

Sorry for noobie question but what's the difference between this rom and other cm roms ? Better performance ?
Sent from my GT-I9300 using XDA Free mobile app

Great, as always

Egli.Kasa said:
Sorry for noobie question but what's the difference between this rom and other cm roms ? Better performance ?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
This is Pure AOSP with a little modifications. You'll have to test to know the difference!
Sent from my SM-T531

*Testing*
What have I done:
-Wipe data/factory reset
-Wipe dalvik cache
-Format /sdcard
-Flash ROM
-Flash fix
-Flash Gapps
The ROM boots, no Gapps problem, but wifi doesn't work. During the startup configuration appeared a bluetooth crash error, just once. While in options bluetooth crashed again (not spamming the error). No recents panel.
The ROM it's very fast and reactive, good work :good:

TENN3R said:
What have I done:
-Wipe data/factory reset
-Wipe dalvik cache
-Format /sdcard
-Flash ROM
-Flash fix
-Flash Gapps
The ROM boots, no Gapps problem, but wifi doesn't work. During the startup configuration appeared a bluetooth crash error, just once. While in options bluetooth crashed again (not spamming the error). No recents panel.
The ROM it's very fast and reactive, good work :good:
Click to expand...
Click to collapse
Just read the first page, you have to flash boeffla kernel (AnyKernel version) to get wifi working :good:

nosphor said:
Just read the first page, you have to flash boeffla kernel (AnyKernel version) to get wifi working :good:
Click to expand...
Click to collapse
But why is there no Recents Panel?
Sent from my GT-I9300 using xda Forum

The Marionette said:
But why is there no Recents Panel?
Sent from my GT-I9300 using xda Forum
Click to expand...
Click to collapse
As you know, AOSP devices have no buttons hence button functionality is messed up. I'll have to find commits for this now!
Sent from my SM-T531

Wow awesome job dude. Looking forward to a stable version. Thanks for making another Lollipop Rom for our S3

I can't get Wi-Fi working with using AnyKernel method. I must mention that I flashed this ROM while being on 4.1.2 firmware, it could made some issues? Flash 4.3 stock then this rom?

@War3st: you need a modem (baseband) MG4 or higher, otherwise you'll loose your IMEI. If you've an older modem, let it update by OTA or KIES - simple flash with Odin messes your IMEI up, too.

I've already had MG4 modem. Wi-Fi doesn't works anyway. I need to flash ROM > AOSP_Fix > Boeffla Kernel or ROM > Kernel > fix?

Gokulbalram said:
I had kept a limit on how many ROMs I will maintain, I kept it at an initial 4, but then when I saw that it'd be possible to get AOSP, I had to break that barrier and make it 5. I'm an official maintainer for 2 ROMs, so even they are on the way!
Anyway, 'nuff said. Enjoy/
Click to expand...
Click to collapse
what roms are you officially maintaining? /OT

War3st said:
I've already had MG4 modem. Wi-Fi doesn't works anyway. I need to flash ROM > AOSP_Fix > Boeffla Kernel or ROM > Kernel > fix?
Click to expand...
Click to collapse
ROM >> Boeffla >> Fix :good:

[ROM][UNOFFICIAL][Lollipop 5.1.1] PAC ROM Lollipop BETA2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PAC-ROM is built with our own tweaks and options, including picks and features from the best ROMs out there!
Why choose among ROMs, when you have All-in-One !!
Specially built by DeltaDroid Team for GALAXY Tab 2 7.0
CLICK!
* By flashing this, you automatically void your warranty! *
* If your phone breaks, blows up or runs away from you, do not cry to us! *
* Do not ask for ETAs!! *
* Download the ROM and GApps *
* Reboot to recovery *
* Wipe data/factory reset *
* Flash the ROM and then GApps *
* Reboot your phone *
* Enjoy *
* Download the latest version *
* Reboot to recovery *
* Flash the ROM *
* Wipe both dalvik cache and cache *
* Reboot your phone *
* Enjoy the latest version of PAC-ROM *
DOWNLOAD​
XDA:DevDB Information
PAC ROM Lollipop, ROM for the Samsung Galaxy Tab 2
Contributors
AngSanley, anonim47, DeltaDroid Team
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: PAC-man
Version Information
Status: Beta
Created 2015-06-12
Last Updated 2015-06-12

Reserved
note: sorry I didn't know there's already a PAC LP rom for this device, I just built it and want to share with you guys, it has no difference with original PAC source code. Thanks

Reserved

I think It wil not be a problem ,the CCD team has already a pac-rom but I wil try this this weekend......
Keep it up to date:good::good:

AngSanley said:
note: sorry I didn't know there's already a PAC LP rom for this device, I just built it and want to share with you guys, it has no difference with original PAC source code. Thanks
Click to expand...
Click to collapse
I stopped the project
You may continue

This is the same source code like CCD project?

levider said:
This is the same source code like CCD project?
Click to expand...
Click to collapse
Yes!

AngSanley said:
note: sorry I didn't know there's already a PAC LP rom for this device, I just built it and want to share with you guys, it has no difference with original PAC source code. Thanks
Click to expand...
Click to collapse
Please keep it going because CCD stopped his project. You may be the only hope for PAC on the Tab2. Also, there are two flavors of ROMS for the Tab2. One is the 3100 which is the Tab2 with cellular. The other is the 3110/3113 which is wifi only. I think the builds are different and the 3113 has infrared so 3110 build works on the 3113 for everything except infrared. A 3100 build does not run well on a 3110/3113. The file you currently have in downloads is for the 3100 only. It would be appreciated if you could build the version for the 3110/3113. Thanks.

archcantor said:
Please keep it going because CCD stopped his project. You may be the only hope for PAC on the Tab2. Also, there are two flavors of ROMS for the Tab2. One is the 3100 which is the Tab2 with cellular. The other is the 3110/3113 which is wifi only. I think the builds are different and the 3113 has infrared so 3110 build works on the 3113 for everything except infrared. A 3100 build does not run well on a 3110/3113. The file you currently have is downloads is for the 3100 only. It would be appreciated if you could build the version for the 3110/3113. Thanks.
Click to expand...
Click to collapse
Will build soon

Thanks!
AngSanley said:
Will build soon
Click to expand...
Click to collapse
I tried your 3100 build on my 3113 and it just bootlooped. Looking forward to see how LP-PAC will run on this tab. Thanks for taking the time to develop for us.

Skarni said:
I tried your 3100 build on my 3113 and it just bootlooped. Looking forward to see how LP-PAC will run on this tab. Thanks for taking the time to develop for us.
Click to expand...
Click to collapse
CCD was doing builds of this ROM but stopped because of lack of interest based on the low number of downloads. He had a 3110 build here: https://www.androidfilehost.com/?w=files&flid=32425 if you want to try it. AngSanley said his build is based on the same source tree. CCD's May build had a known GPS problem. CCD's June build fixed that. I tried it but to me it seemed the GPS was not as sensitive as it should be. In my basement with 4.4.4 I could get a lock in about 20 seconds. With CCDs June build I could not get a lock at all in the basemment. So it's possible AngSanley's 3110 build might have the same problem because of the same source.
I would recommend to all if you are interested in PAC LP for the TAB2 that you show your interest and appreciation for the work that AngSanley is continuing. I believe he said he was just doing the builds from source and was not actually doing any coding, so please don't ask him to fix anything. He's doing us a favor by providing the builds. When bugs get fixed in the source tree they will eventually reach us through AngSanley's subsequent builds.

Skarni said:
I tried your 3100 build on my 3113 and it just bootlooped. Looking forward to see how LP-PAC will run on this tab. Thanks for taking the time to develop for us.
Click to expand...
Click to collapse
archcantor said:
Please keep it going because CCD stopped his project. You may be the only hope for PAC on the Tab2. Also, there are two flavors of ROMS for the Tab2. One is the 3100 which is the Tab2 with cellular. The other is the 3110/3113 which is wifi only. I think the builds are different and the 3113 has infrared so 3110 build works on the 3113 for everything except infrared. A 3100 build does not run well on a 3110/3113. The file you currently have in downloads is for the 3100 only. It would be appreciated if you could build the version for the 3110/3113. Thanks.
Click to expand...
Click to collapse
We just deleted PAC source code yesterday and replace it with AICP source. We will sync PAC source code again. We are now compiling AICP for this tab

Root permissions?
Hi there,
I have recently installed the rom and everything is great, but there seems not to be root permissions available. Is there any way to get the root permission? Thanks.
Device: GT-P5110

luckyboy8488 said:
Hi there,
I have recently installed the rom and everything is great, but there seems not to be root permissions available. Is there any way to get the root permission? Thanks.
Device: GT-P5110
Click to expand...
Click to collapse
Flash Supersu from Recovery
http://forum.xda-developers.com/showthread.php?t=1538053

sinisthro said:
Flash Supersu from Recovery
http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
Thanks so much, the rom works like a charm now!

now, where can i find the GAPPS?

[ROM][6.0.1][KLTE][NIGHTLY/STABLE] Official Mokee Open Source Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
About
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application: http://www.mfunz.com/en/developer-application, you can host your unofficial MoKee builds on our server!
Features:
(I will mention only that which does not take into CyanogenMod)
Listview animation
Interpolation anmação listview
Update over the air can download the download website only incremental, it helps lower faster update and upgrade more easily:
Some icons and own layouts
Manager for Google services, so no need to use a large gapps, you can only download necessary at MokeeCenter
Ringtones, Alarms, Notification, UI sounds are all different CyanogenMod, thus bringing a beautiful charm to rom
bootianimation own
information integrated into MokeeCenter
Settings to add speed data network
Settings for navigation bar
Settings for Statusbar
Intelligent control settings to configure the newer apps and others.
Downloads oficiais:
KLTE
GAPPS (Google Apps)
RELEASES = stables / no problems
NIGHTLYS = bugs ???
Changelog:
HERE
Installation mode :
To install the clean rom:
Download the rom
enter the recovery
make all wipes (expect internal storage)
choose zip from SD and install
you can use a gapps any of its taste since it is for android 6.0.x
or you can go MokeeCenter after starting rom, there you can download the small gapps integrated into the system and have a lighter and clean rom.
To install upgrade:
Method 1:
just download the complete package via OTA
enter the recovery
only to wipe cache and dalvik (optional, I do not)
install the complete package downloaded via OTA
Method 2:
Download the complete package over the air and go to install update
let install automatically for you
Method 3:
Download only incremental updates
for that you need to donate 30 CNY for the team to release the feature on the device directly
But you can do this update without donation
just go on the site and click below build itself where it is written (upgrade: OTA to MK ...)
there will be the incremental free for you, this will save on your data package or in your spare time.
Big Thanks @martincz for development
Thank you so much @smokerman for video
XDA:DevDB Information
Mokee Open Source, ROM for the Samsung Galaxy S 5
Contributors
[email protected], EsromG5, martincz
Source Code: https://github.com/MoKee
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: Cyanogenmod
Version Information
Status: Nightly
Beta Release Date: 2015-12-19
Created 2015-12-19
Last Updated 2016-08-13

Reserved

Thx , i will try

xtmzone said:
Thx , i will try
Click to expand...
Click to collapse
Yes waiting for your feedback.

Awessome work guys.
Can't wait to try.....

---------- Post added at 11:49 PM ---------- Previous post was at 11:48 PM ----------
[/COLOR]
[email protected] said:
Yes waiting for your feedback.
Click to expand...
Click to collapse
will this work on g900t? c: because some cm rooms don't seem to work on this phone. ._.

[email protected] said:
Yes waiting for your feedback.
Click to expand...
Click to collapse
will this work on g900t? c: because some cm roms don't seem to work on this phone. ._.

Have waited for this one, thank you!
Flashed this rom today and I have only found one bug. I loose signal (or connection) from time to time. Had the same problem with CM13. Never a problem with samsung-roms so wonder why it happens. Is this a bug for everyone? Did full wipe before i flashed Mokee. Also tried to install without gapps, but the bug was still there.
Everyting else works perfect!
Donated some beer-money for you

No kltespr??

tman23 said:
No kltespr??
Click to expand...
Click to collapse
Will be up very soon

daddymemoru said:
will this work on g900t? c: because some cm roms don't seem to work on this phone. ._.
Click to expand...
Click to collapse
Rom is working tested.

Hey mate, is the rom based only on AOSP or half on aosp/cyanogenmod ? And will cm13 based kernels work on the rom ?

komarov27 said:
Hey mate, is the rom based only on AOSP or half on aosp/cyanogenmod ? And will cm13 based kernels work on the rom ?
Click to expand...
Click to collapse
Based on both some features is taken from cm.
Yes cm based kernel will work.

[email protected] said:
Based on both some features is taken from cm.
Yes cm based kernel will work.
Click to expand...
Click to collapse
Ok thanks for the info. I was asking since cm13 usualy lags on high use but aosp has no problems.. I will try the rom and see how it works.

komarov27 said:
Ok thanks for the info. I was asking since cm13 usualy lags on high use but aosp has no problems.. I will try the rom and see how it works.
Click to expand...
Click to collapse
Waiting for your feedback

@[email protected] any chance of a kltespr.build ?EDIT:EDIT: read through and seen kltespr. Already been mentioned and answered, sorry.can't wait to try out the kltespr.build.

[email protected] said:
Waiting for your feedback
Click to expand...
Click to collapse
I've tested the rom now for about 30min. It's not really my cup of tea as there aren't a lot of features. It seems that it is much more stable and smoother than the other cm13-based roms (since there isn't any lag on high use). Given everthing i said above i would say that it's a good rom. Keep up the good work and hope to see more features coming.

Test runs.
Boeffla CM13 Kernel v8 don´t work, Bootloop
But the ROM is great, test runs again without Boeffla.
Some apps running back who have not previously worked with CM13.
If all sensors are working remains the ROM on mobile

komarov27 said:
I've tested the rom now for about 30min. It's not really my cup of tea as there aren't a lot of features. It seems that it is much more stable and smoother than the other cm13-based roms (since there isn't any lag on high use). Given everthing i said above i would say that it's a good rom. Keep up the good work and hope to see more features coming.
Click to expand...
Click to collapse
Which is the most stable cm13 ROM in your opinion ?
Sent from my SM-G900F using XDA Premium 4 mobile app

[email protected] said:
Rom is working tested.
Click to expand...
Click to collapse
I tried it and got stuck in bootloop.
Tried wiping cache, dalvik, system, and data And flashed both. Still stuck in bootloop. am I doing something wrong? CM roms never work For me.

[ROM][espressowifi+3g]AICP-11.0-MM 6.0.1 Unofficial builds

.
.
.
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or LAOS team, if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
.
.
.
.
.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
[URL="https://www.google.com/url?q=https%3A%2F%2Fwww.paypal.com%2Fcgi-bin%2Fwebscr%3Fcmd%3D_s-xclick%26hosted_button_id%3DHPLUC7KGVT9AE&sa=D&sntz=1&usg=AFQjCNEhDXr0bwFuGIR1HSfWV2H-q1oPYA"]
Latest Stable Release Version 11
Download link: https://www.androidfilehost.com/?w=profile&uid=961840155545576070
Full Changelog link: goo.gl/mIgmYG
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
You tell...
[/COLOR]
The ROM should contain everything you need to enjoy Android Marshmallow. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it, and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Again: Don't do it if you don't know it!
Download the ROM and GApps and transfer them to your device
Boot to recovery (TWRP recommended)
Wipe system, Cache, data and ART/Dalvik cache
Flash ROM Zipfile
Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
Flash/Install the root solution of choice (optional)
Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
KERNEL:
Kernel in this ROM follows LAOS source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash using the buildin OTA app that needs TWRP recovery installed to work.
You can still use CWM/LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. Zip gets saved in the "AICP_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
IceColdJelly AICP G+ community
Kernel:
https://github.com/LineageOS/android_kernel_samsung_espresso10.git
ROM & Additional links:
Gerrit Code Review
Github
ROM OS Version: 6.0.1 MM
ROM Kernel: Linux 3.0.x
Version Information
Status: Beta
Beta Release Date: 2017-07-07
Creation date 2017-07-07
Last Updated 2017-07-07
You want to see a normal night at the "DEV office", click here!!​
XDA:DevDB Information
[ROM][espressowifi+3g]AICP-11.0-MM 6.0.1 Unofficial builds, ROM for the Samsung Galaxy Tab 2
Contributors
icxj1
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2017-08-06
Last Updated 2017-08-07

For espressowifi only at this time. I will post weekly builds. Please report bugs, advice is welcome. Enjoy!

oh, nice
welcome to the club:laugh:
why here and not in unified section?

smart-t78 said:
oh, nice
welcome to the club:laugh:
why here and not in unified section?
Click to expand...
Click to collapse
Thanks, first thread ever so was not sure where to post. For now l only have 7.0 WiFi working.

icxj1 said:
Thanks, first thread ever so was not sure where to post. For now l only have 7.0 WiFi working.
Click to expand...
Click to collapse
first thread, i know how you feel:laugh::laugh:
thx for sharing your work

I can run a 7.0 3g if anyone request & want to test.

icxj1 said:
I can run a 7.0 3g if anyone request & want to test.
Click to expand...
Click to collapse
If you have any questions about kennel stuff, feel free to shoot me a pm. I don't do much development anymore but I used to do a lot for this tab, glad to see it's still alive...maybe time to blow the dust off it

Beeko said:
If you have any questions about kennel stuff, feel free to shoot me a pm. I don't do much development anymore but I used to do a lot for this tab, glad to see it's still alive...maybe time to blow the dust off it
Click to expand...
Click to collapse
That's gr8 I really appreciate the work you put into it in the past. You don't know I almost pm you a couple of times :laugh:. If not for you @Beeko , @alial04 ,& @Android-Andi i would still be scratching my head. Lol! Right now I am using a mix of branch cm 14.1 & cm 13.1 in my tree.

Please some one guide me... mine is p3100 which one gapps should i download for use this rom? Thanks..
Sent from my SM-N9208 using Tapatalk

The_papajuara said:
Please some one guide me... mine is p3100 which one gapps should i download for use this rom? Thanks..
Click to expand...
Click to collapse
Just use open gapps 6.0 nano arm, you can add more from play store later. But this is p3110 based so make a backup & store on sdcard, bcuz not sure if it will work for p3100. Ril telephony stuff is included but tested. Let me know & I will run a 3g build tonight or tomorrow morning.

icxj1 said:
Just use open gapps 6.0 nano arm, you can add more from play store later. But this is p3110 based so make a backup & store on sdcard, bcuz not sure if it will work for p3100. Ril telephony stuff is included but tested. Let me know & I will run a 3g build tonight or tomorrow morning.
Click to expand...
Click to collapse
Okay dev is clear now.... im on this rom for long time... just want to try this... but.. its for base p3110.. sadly....[emoji24] [emoji24] [emoji24] [emoji24] ..how ever gonna flash this and report back... Okay... Please make one for p3100.. [emoji2]
Sent from my SM-N9208 using Tapatalk

icxj1 said:
Just use open gapps 6.0 nano arm, you can add more from play store later. But this is p3110 based so make a backup & store on sdcard, bcuz not sure if it will work for p3100. Ril telephony stuff is included but tested. Let me know & I will run a 3g build tonight or tomorrow morning.
Click to expand...
Click to collapse
if you install a only wifi build on a 3g device it also can be possible that you have no audio

Right on, no problem. I will start this evening on 3g build. :good:

Nice, :good: Waiting for espresso3G :good:

reserved

AICP on P5113
Greetings,
I just wanted to report that I have successfully installed aicp_espressowifi_mm-11.0-UNOFFICIAL-20170707.zip + open_gapps-arm-6.0-pico-20170709.zip on my P5113 (espressowifi) tablet and to thank you for building/sharing AICP with us.
Thanks.

It says "We hope you enjoy Nougat"
...this is a marshmallow rom isn't it?

Lightracer said:
It says "We hope you enjoy Nougat"
...this is a marshmallow rom isn't it?
Click to expand...
Click to collapse
Yes it is MM, but I have some cm 14.1 stuff merged in. Where did you see this at?

icxj1 said:
Yes it is MM, but I have some cm 14.1 stuff merged in. Where did you see this at?
Click to expand...
Click to collapse
Aha! I see. I will edit. Thanks!

mentat said:
Greetings,
I just wanted to report that I have successfully installed aicp_espressowifi_mm-11.0-UNOFFICIAL-20170707.zip + open_gapps-arm-6.0-pico-20170709.zip on my P5113 (espressowifi) tablet and to thank you for building/sharing AICP with us.
Thanks.
Click to expand...
Click to collapse
That's gr8 hope you enjoy!